Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SWITCH, PUSH

Active
SPE7M2-26-T-5702Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a PUSH SWITCH with the NSN 5930-01-170-8298 and part number 621822-1, subject to strict technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The item must comply with hazardous material restrictions, including a complete prohibition on intentional addition of mercury or mercury-containing compounds unless used in approved functional applications such as batteries, fluorescent lamps, sensors, weapon systems, or naval-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The switch must meet NAVAIR aircraft launch and recovery equipment traceability standards, with bare item markings required to display the contract number, NAWC CAGE 80020, and part number unless superseded by technical drawings. MIL-STD-130 and MIL-STD-129 apply for marking, and packaging must adhere to MIL-STD-2073-1E and MIL-DTL-28786 for switches. Use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing stages without explicit written approval from the contracting officer, and this restriction overrides any conflicting specifications. The item is classified as a critical application item for use in avionics systems under the specification SPE7M2-26-T-5702, with technical data package revisions tied to reference drawings 80020 621822 and 80020 519780. The contract is a total small business set-aside with a delivery requirement of 619 days from award, FOB origin, and inspection and acceptance at destination. The order quantity is 26 units at $26.00 each, totaling $676.00. Packaging must follow the preservation and marking codes outlined, with no special marking required. Shipping and delivery are to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of April 14, 2028.

General Info

Procurement of 26 push switches, NSN 5930-01-170-8298, for avionics, FOB origin, delivery by April 14, 2028, to New Cumberland, PA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PUSH
SWITCH<(>,<)> PUSH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
PER NAVAL AIR WARFARE CENTER, CAGE 80020<(>,<)>
DRAWING/PART NUMBER 621822(-1), MIL-STD-130 APPLIES.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
CRITICAL APPLICATION ITEM
SAFRAN ELECTRONICS & DEFENSE, AVIONICS 879B2 P/N 10HA30C1F171J14L(RBBR)N300R7,V12
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80020 621822
SPE7M2-26-T-5702
SECTION B
REVISION NR J DTD 06/21/2000
PART PIECE NUMBER: 621822-1
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80020 519780 REVISION NR C DTD 06/19/2014 PART PIECE NUMBER: 519780-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017437971 0001 EA 26.000
NSN/MATERIAL:5930011708298
DELIVERY (IN DAYS):0619
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-28786, FOR SWITCHES.
..
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M2-26-T-5702
SECTION B
PR: 7017437971 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/14/2028 Original Required Delivery Date:11/19/2027
SPE7M2-26-T-5702 NSN/Part Number: 5930-01-170-8298 Quantity: 26 EA Purchase Request: 7017437971QTY: 26 Delivery: 619 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of a light indicator switch, identified by NSN 6210014688520 and part number M22885/80-HECR, conforming to military specification MIL-PRF-22885K and MIL-PRF-22885/80J. It is classified as a critical application item and requires compliance with the DLA Master List of Technical and Quality Requirements, with all referenced technical and quality standards incorporated by reference. Mercury or mercury-containing compounds are strictly prohibited in the product except for specified functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents as defined by NAVSEA, and any portable items containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. The item must be listed on the Qualified Products List or Qualified Manufacturers List, as it is designated as a primary QPL/QML item. The contract calls for 14 units to be delivered FOB origin within 171 days from the required delivery date of March 15, 2027, with no variance permitted in quantity. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking compliant to MIL-STD-129 and no special marking codes. Hazardous materials shipping procedures must adhere to IP025 guidelines, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each (EA) at a unit price of $14.00, totaling a contract value of $196.00. The solicitation was issued on July 21, 2026, with a response deadline of July 29, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division with Gloria Frimpong as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECA specialized electrical cable assembly designated P/N T00387-5083 with NSN 6150015891293 is being procured under contract SPE4A6-26-T-08TY for a quantity of 15 units, to be delivered FOB origin within 103 days from the contract date, with no tolerance for variance in quantity. The item is classified as a critical application item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with all items marked in accordance with physical identification standards, and all documentation subject to cybersecurity maturity model certification level 2 self-assessment. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required ship date set for November 10, 2026. The contract includes full compliance with DLA procurement policies for documentation, source approval, government identification removal, and transportation protocols.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract is for the procurement of a specialized cable assembly with part number 5859440-31 and NSN 6150012583722, under solicitation SPE4A6-26-T-08LT, issued by the Department of Defense’s ASC Commodities Division. The requirement calls for 17 units to be delivered FOB origin within 171 days, with a fixed unit price of $17.00 and no variance allowed in quantity. The cable assembly must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and configuration changes must follow formal Engineering Change Proposal procedures. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based methods, with verification levels assigned based on attribute criticality, and acceptance requires zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with all marking, labeling, and palletization following DLA-specific requirements. The contract explicitly prohibits mercury or mercury-containing compounds in the product, preservation, packaging, and marking, with limited exceptions for functional uses in batteries, lighting, sensors, weapon systems, or specified reagents. Additionally, portable mercury-containing devices must include shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Cybersecurity compliance is required at CMMC Level 2 through a self-assessment, and physical identification of bare items must be performed per RQ017. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract also mandates full alignment with DLA packaging, unit of issue, and eProcurement standards, with all documentation referencing the DLA website for the latest revisions as of the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO FThe contract pertains to the procurement of a radio frequency cable assembly identified by NSN 5995-01-501-7456 and part number AE12002, with a quantity of three units to be delivered within 188 days from the contract date. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 respectively, under DLA packaging standards, with no special marking required. The item is classified as a critical application item requiring strict adherence to technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Sampling of the delivered goods must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance unless otherwise directed, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contractor must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and remove any government identification from non-accepted supplies. The delivery destination is the DLA Distribution Center in New Cumberland, Pennsylvania, and transportation logistics must align with DLAD procedural notes C19 and C20. The solicitation was issued under contract number SPE4A6-26-T-08DX with a response deadline of July 29, 2026, and the item falls under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to the procurement of five cable assemblies, identified by NSN 6150-01-258-3703, under solicitation SPE4A6-26-T-08CX, with a delivery requirement of 171 days after award. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with all applicable standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances mandated unless otherwise stated. Configuration control requires formal engineering change proposals, and any variance requests must be formally submitted. The assembly is classified as covered defense information, triggering cybersecurity compliance under CMMC Level 2, and must be produced by a certified third-party assessment organization. Physical marking and packaging must adhere to DLA packaging requirements and item identification standards. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, meaning any disclosure to foreign persons, including foreign employees or subsidiaries, requires prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to this technical data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by DLA. The contract's performance location is Tracy, California, with Jessica Fuentes-OSSIO as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, under a federal procurement mechanism for a non-set-aside acquisition classified under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
WRENCH, COMBINATION, SPEThe contract is for nine combination torque wrenches of a special purpose design, solicited under SPE4A5-26-T-301C with a response deadline of July 29, 2026, and a delivery schedule of 171 days after order. The item is identified by NSN 5120-01-696-2214 and is procured by the Department of Defense, specifically the ASC Supplier Operations OEM Division, with performance required in New Cumberland, Pennsylvania. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Documentation for source approval must be submitted, and the item is subject to defense export-control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons without authorization and requiring contractors to hold JCP certification, complete mandatory DOD export training, and receive DLA approval before accessing controlled data. DFARS clauses addressing export control and removal of government identification from non-accepted supplies apply, and while item unique identification is not required per the Service customer’s request, physical marking of the bare item is mandated. Packaging must comply with DLA procurement standards, and all communications and submissions must adhere to the designated point of contact, Rasulbek Kilichev.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract governs the procurement of a SWITCH,PUSH item identified by NSN 5930-01-415-3717 and part number 10648RA10-34 from DUCOMMUN LABARGE TECHNOLOGIES, INC, with a firm fixed price of $3.00 per unit for a total of three units. Delivery is required within 81 days of contract award, shipped FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative methods, container types, and marking per MIL-STD-129 with no special markings required. The item is classified as a critical application item, and mercury or mercury compounds are strictly prohibited unless specifically exempted for functional uses such as batteries or sensors, with additional containment requirements for any permitted mercury-containing devices per NAVSEA 5100-003D. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contractor must adhere to DLA packaging and defense information handling protocols. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must follow DLAD procedural notes C19 and C20. The original required delivery date was January 12, 2026, with a need ship date of March 3, 2026, under solicitation SPE7M8-26-T-5463, with responses due by August 3, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY-SWIT
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 333998
New
DIBBS
THREAD, PIECEThe item specified is a THREAD, PIECE with NSN 1720-00-602-0997, quantity of 25 units, under Purchase Request 7017528515, with a delivery deadline of 162 days ADO. This procurement is governed by strict DLA packaging requirements and requires the contractor to be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, are authorized to access the controlled data. The solicitation number is SPE7M2-26-T-5700, posted on July 21, 2026, with responses due by August 3, 2026. The contracting organization is the Department of Defense’s Nuclear Reactor Program, with performance to be delivered to New Cumberland, PA, 17070-5002. Alisha Blanton is the primary point of contact for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
PRODUCTION LOT TESTINGThis contract pertains to the procurement of a PUSH SWITCH designated as NSN 5930-01-327-0031, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). The item must be sourced exclusively from an approved supplier as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with Offerors required to provide documentation proving source approval, such as a letter from NAVICP’s Engineering and Product Support Directorate. Serialization and full traceability are mandatory for every unit and its packaging, including scrappage records, and any attempt to rebrand or obscure original OEM markings is strictly prohibited. The item must comply with stringent technical and quality standards referenced from the DLA Master List, including SAE AS9100 for quality management, and must be marked per MIL-STD-129 with specific identifiers including contract number, NAWC CAGE code, part number, lot number, and manufacturer CAGE code. No ozone-depleting chemicals may be used, and mercury or mercury compounds are banned unless explicitly exempted for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs, and non-conformances must result in zero acceptance unless contractually altered. The contractor must submit Production Lot Test reports, a Production Test and Inspection Report, and a Certificate of Quality Compliance; the Certificate of Conformance clause is not permitted. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, marked with special codes and palletized appropriately, with all items delivered FOB origin and inspected and accepted at origin. Delivery is scheduled for 338 days after contract award, with a firm fixed price and no quantity variance allowed. The item is part of a total small business set-aside, and all documentation referencing technical data, quality assurance provisions, and engineering drawings must be current and authoritative, with source-controlled drawings dictating marking and configuration requirements even if other sources are listed.
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
New
DIBBS
GROMMET, NONMETALLICThe contract specifies the procurement of 6,250 nonmetallic grommets identified by NSN 5325-00-276-4204 under solicitation SPE7M2-26-Q-0657, with a firm fixed price and no variance allowed in quantity. Delivery is required within 250 days after order date, with FOB origin and inspection and acceptance occurring at the destination. All items must comply with the current revision of the governing industry standard NASM3036, Revision 3 dated December 31, 2024, and manufacturing must align with this standard from the solicitation date forward; prior revisions are acceptable only for previously produced hardware. The grommets must be packaged and preserved in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special markings required. Mercury or mercury compounds are strictly prohibited in any part of the product, packaging, preservation, or marking, except for incidental functional uses in specific exempted items like batteries or instruments, which must include secondary containment. Packaging must use nonmetallic materials, with unit containers holding 100 pieces, packed in intermediate containers designated E5 and marked using the U pack code. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation details are governed by DLA procedural notes C19 and C20. The item is needed by November 5, 2027, and the point of contact for the contract is Hunter Steele of the Department of Defense’s Nuclear Reactor Program.

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
New
DIBBS
CABLE, POWER, ELECTRI

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSEThis contract is for the procurement of CLAMP, HOSE with NSN 4730-00-908-6294 under solicitation SPE7M2-26-Q-0659, requiring a total quantity of 2,729 units delivered in two lots: 980 units and 1,749 units, respectively. All items must conform to technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The contract mandates strict adherence to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging and palletization protocols, with no special marking permitted. Items must be shipped FOB origin with a firm fixed price and a delivery timeframe of 150 days after order date, arriving at designated DLA distribution depots in Hill AFB, Utah, and New Cumberland, Pennsylvania. Zero tolerance is enforced for quantity variance, and inspection and acceptance occur at the destination. The product is designated as a critical application item and must comply with TDP Revision B Generation 3 per CID A-A-52506E and SAE J1508. Mercury or mercury-containing compounds are prohibited unless specifically exempted, such as in functional batteries, fluorescent lights, sensors, weapon systems, or approved reagents; portable mercury-containing devices must include a second containment boundary. All deliveries must follow DLA transportation procedures C19 and C20, and the contract supports full and open competition with no set-aside restrictions.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTOR
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
CONTRACTOR FIRST ARTIC

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
New
DIBBS
CAP, CYLINDER ASSY

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334413
New
DIBBS
FUSE, CARTRIDGE
Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
RUBBER SHEET, SOLID
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a connector, receptacle with NSN 5935-01-721-8829, quantity of three units, under solicitation SPE7M2-26-Q-0658, with a firm fixed price and zero variance allowance in quantity. Delivery is required within 150 days after award, with FOB origin and inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, using specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special marking codes. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The contract incorporates stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including configuration change management, source approval documentation, and physical identification standards. It prohibits the intentional use of mercury or mercury-containing compounds unless explicitly exempted for functional applications such as batteries or sensors, and requires secondary containment for portable mercury-containing devices. Use of Class I ozone-depleting substances is strictly forbidden in all manufacturing and processing stages unless written approval from the contracting officer is obtained, with exceptions for commercial items or part-numbered-only components. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The technical data package revision is tied to drawing 16-AUV314-02 dated April 1, 2023, and all requirements must be met without deviation unless formally authorized.

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details