SWITCH SUBASSEMBLY

SWITCH SUBASSEMBLY
SWITCH SUBASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
A.
A COMPLETE COMPETITIVE DATA PACKAGE CANNOT
BE DEVELOPED BECAUSE THE CONTROLLING DRAWING
AND/OR APPROVED SOURCE DATA ARE INSUFFICIENT
TO COMPLETELY DEFINE PERFORMANCE REQUIREMENTS.
B.
COMPLETE MECHANICAL, PHYSICAL, MATERIAL,
ENVIRONMENTAL, ELECTRICAL (IF APPLICABLE),
QUALIFICATION TESTING, SAMPLE QUANTITY AND
ACCEPTANCE TESTING REQUIREMENTS, INCLUDING
SAMPLING CRITERIA ARE INCOMPLETE OR MISSING.
C.
IF IT WERE POSSIBLE TO DEVELOP A COMPLETE
DATA PACKAGE, FIRST ARTICLE TESTING AND/OR
COMPATIBILITY TESTING WOULD MOST LIKELY BE
IMPOSED TO INSURE RECEIPT OF A SATISFACTORY
ALTERNATE.
D.
ALL POTENTIAL SOURCES MUST DEVELOP A DATA
PACKAGE THAT COMPLETELY DEFINES ALL THE AREAS
LISTED ABOVE AND MUST INCLUDE THEIR PROPOSED
TEST PLAN PATTERNED TO A TYPICAL (SIMILAR TYPE
ITEM) INDUSTRY STANDARD, MIL-SPEC OR
GOVERNMENT STANDARD QUALIFICATION AND ACCEPTANCE
TESTING REQUIREMENTS.
E.
ANY PROPOSALS RECEIVED THAT MEETS THE
ABOVE CRITERIA MUST BE EVALUATED BY A TECHNICAL
REPRESENTATIVE IN CONJUNCTION WITH THE ESA.
F.
CONTRACTORS FAILING TO SUBMIT AN OFFER IN
ACCORDANCE WITH THESE REQUIREMENTS SHOULD BE
CONSIDERED TECHNICALLY NONRESPONSIVE.
SPE7M8-27-T-0617
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
DUCOMMUN LABARGE TECHNOLOGIES, INC 08719 P/N 10410SY-10
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 65902-01014-159
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019028878 0001 EA 4.000
NSN/MATERIAL:5930001892401
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SPE7M8-27-T-0617
SECTION B
PR: 7019028878 PRLI: 0001 CONT’D
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:05/04/2027 Original Required Delivery Date:04/22/2027
SPE7M8-27-T-0617 NSN/Part Number: 5930-00-189-2401 Quantity: 4 EA Purchase Request: 7019028878QTY: 4 Delivery: 168 days ADO