Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

Case Studies Pricing

Search

Top

Back to Contracts

SWITCH, THERMOSTATIC

Active

SPE7M8-26-Q-0108Federal

Response Deadline

03/10/2026, 05:00:00 PM UTC

AI Contract Overview

Show more

This contract involves the procurement of 16 thermostatic switches, identified by NSN/Part Number 5930-01-497-6284. The solicitation number is SPE7M8-26-Q-0108, with the request posted on February 27, 2026, and a response deadline of March 10, 2026. The delivery requirement is set for within 90 days after the award date. The procurement is overseen by the Electrical Devices Division of the Department of Defense, designated under NAICS code 334512, which covers the manufacture of electronic components. The contract incorporates several technical and quality requirements referenced in the Defense Logistics Agency (DLA) master list which must be adhered to by suppliers. These include packaging standards and the removal of government identification on non-accepted supplies. Alternate offerors must submit a complete data package for both approved and alternate parts. The point of contact for this solicitation is Kitnarone Phengthongsavath, reachable via email or phone, and further details and documentation are accessible through the DLA’s procurement system website. The contract emphasizes compliance with specified standards to ensure quality and timely delivery of the thermostatic switches.

General Info

Procurement of 16 thermostatic switches, response by March 10, 2026, delivery within 90 days.

Agency

Department Of Defense → ELECTRICAL DEVICES DIV

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

Place of Performance

US

Set-Aside

NONE

Documents(1)

Request for Quotations SPE7M8-26-Q-0108

PDF•20 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedFeb 27

Solicitation

Response DeadlineMar 10

Submission deadline

Response Deadline

03/10/2026, 05:00:00 PM UTC

in 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ELECTRICAL DEVICES DIV

View Agency Profile

Office Address

US

Contacts

1 contact available

View Contacts

Start a free trial to view contact information.

Start Free Trial

Full Description

Show more

SWITCH, THERMOSTATIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR NSN/Part Number: 5930-01-497-6284 Quantity: 16 EA Purchase Request: 7014578753QTY: 16 Delivery: 90 days ADO

Similar Contracts

INDICATOR SUBASSEMB

This contract covers the procurement of two units of a pressure indicator subassembly, identified by part number SP-0356-0592 and NSN 6685-01-457-0956, for delivery to Hill Air Force Base. The contract specifies adherence to DLA packaging requirements, MIL-STD-129 marking standards, and packaging details aligned with MIL-STD-2073-1E to ensure proper preservation and handling, including special handling instructions for delicate instruments. The procurement does not require item unique identification per DFARS regulations, and sampling and inspection will be conducted according to military standards such as MIL-STD-1916 or ASQ H1331, ensuring strict quality control with defined acceptance levels for critical, major, and minor attributes. Delivery is FOB origin with inspection and acceptance at the destination, with a required delivery timeframe of 161 days from the contract award, aiming for shipment by August 18, 2026, and final delivery by August 31, 2026. The contract incorporates technical and quality requirements from the DLA master list with revision control depending on solicitation or award dates. The supplier Rogerson Kratos, associated with CAGE 34830, is the designated manufacturer, responsible for compliance with source approval, documentation, identification, and packaging criteria. Shipping will be directed to the DLA Distribution Depot at Hill AFB, Utah, with hazardous materials handling and shipment processes conforming to applicable DoD procedures. The contract is managed by the Department of Defense’s ASC Supplier OEM Division, NAICS code 334512, with a point of contact provided for inquiries.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days

TRANSMITTER, PRESSURE

This contract is for the procurement of pressure transmitters, specifically identified under NSN 6685-01-497-0984, with a total quantity of four units to be delivered to the Defense Logistics Agency (DLA) Distribution San Joaquin facility in Tracy, California. The contract requires adherence to DLA packaging requirements, technical and quality standards as delineated in the DLA Master List, and prohibits the intentional addition or direct contact with mercury or mercury compounds in the supplied hardware. Inspections and acceptance are to be conducted at the destination, with packaging and marking conforming to military standards MIL-STD-2073-1E and MIL-STD-129 respectively. The delivery is scheduled for 161 days from award, with an original required delivery date of February 6, 2027. Quality assurance sampling will follow MIL-STD-1916 or equivalent standards, emphasizing strict compliance with acceptance levels based on attribute criticality. The contract stipulates removal of government identification from non-accepted supplies and mandates no special marking beyond prescribed standards. Freight transportation instructions and address details are specified, along with contact information for contract inquiries. The solicitation was posted on March 1, 2026, with a response deadline of March 9, 2026, under solicitation number SPE4A6-26-T-862A, managed by the Department of Defense via the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days

59--SWITCH,THERMOSTATIC

This contract involves the procurement of 35 units of thermostatic switches, identified by National Stock Number 5930015225198, with delivery required to the DLA Distribution San Joaquin (W1A8) within 116 days after order. The approved manufacturer source for these switches is designated as 1KWT0 035 468. The solicitation is issued as a Request for Quote (RFQ) with no physical copies available; all submissions must be made electronically, and all responsible sources are eligible to submit quotes for consideration, provided they are received on time. The procurement is managed by the Defense Logistics Agency (DLA) Land and Maritime office located in Columbus, Ohio, under the NAICS code 334512. The solicitation, SPE7M826T2508, was posted on March 1, 2026, with a response deadline of March 12, 2026. Detailed specifications, plans, or drawings are not provided with the solicitation. Potential offerors are instructed to direct any questions to the buyer via email as listed in the solicitation document. The solicitation and related information are accessible online through the DLA’s electronic bidding system, ensuring transparency and ease of electronic quote submission. This process emphasizes timely receipt and electronic handling of quotes to facilitate an efficient procurement.

DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days

TRANSMITTER, PRESSUR

This contract covers the procurement of four units of a pressure transmitter (NSN 6685-01-489-1170, P/N 7176-01) intended for delivery to the Defense Logistics Agency distribution center in Tracy, California. The contract specifies strict adherence to DLA packaging requirements, including compliance with MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging where applicable. The materials must be free of intentional mercury content unless specifically exempted due to functional usage, conform to quality standards outlined in the DLA Master List of Technical and Quality Requirements, and undergo acceptance inspection at the destination. Sampling and quality verification will follow MIL-STD-1916 or comparable zero-based sampling plans with defined acceptance quality levels for critical, major, and minor attributes. The contract delivery schedule requires the items to be shipped by August 18, 2026, with a final required delivery date of October 25, 2026, and includes strict zero-percent variance in quantity. The unit price and total price details are integrated into the contract, which identifies Howell Laboratories Inc. as the supplier and specifies destination inspection and acceptance points. Special handling instructions include compliance with packaging for hazardous materials if applicable, and the removal of government identification from non-accepted supplies. The contract is managed by the ASC Supplier Operations OEM Division under the Department of Defense, with a primary point of contact provided for communication regarding the solicitation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days

SENSOR, AMBIENT TEMP

This contract covers the procurement of two ambient temperature sensors, identified by NSN 6685-01-652-7045 and part number 825312-2, for delivery to the Defense Logistics Agency (DLA) Distribution Depot at Tinker Air Force Base. The sensors must comply with stringent technical and quality requirements as specified by the DLA Master List, including traceability documentation, configuration management, and FAA airworthiness approvals. Packaging, preservation, and marking must adhere to federal and military standards such as MIL-STD-2073-1E and MIL-STD-129, ensuring proper handling and identification throughout the supply chain. Sampling and inspection methods are governed by MIL-STD-1916 or comparable plans, emphasizing zero tolerance for non-conformance unless otherwise stated. The contract stipulates a delivery timeline of 32 days, with acceptance and inspection occurring at the destination. Special attention is required for supply chain traceability and removal of government identification from non-accepted supplies. The sensors are designated as critical application items, requiring certificates of airworthiness and conformance in line with FAA regulations. The purchase request is managed by the ASC Supplier OEM Division under the Department of Defense, with specified contact details for contract coordination. The solicitation was posted in late February 2026, with responses due by early March, and a required ship date set for early March 2026 to meet a final delivery deadline of May 1, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 1 day