Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH, TOGGLE

Active
SPE7M8-26-T-6443Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one toggle lever switch, identified by NSN 5930014116221 and part number MS27788-31E. The item must adhere to technical specifications MS27788F and MIL-DTL-3950L. The acquisition is subject to full and open competition and requires compliance with the Qualified Products List or Qualified Manufacturers List. Additionally, the contract mandates strict adherence to DLA packaging requirements, marking standards per MIL-STD-129, and a prohibition on the intentional addition of mercury, except where functionally required. The order is managed under solicitation SPE7M8-26-T-6443 with a required delivery date of September 4, 2026, and a delivery timeframe of 20 days. Shipping is FOB destination to a USCENTCOM Air Force address in Al Udeid, Qatar. Quality and technical requirements are governed by the DLA Master List, including specific protocols for configuration change management and the removal of government identification from non-accepted supplies.

General Info

Procurement of one toggle lever switch for delivery to Al Udeid, Qatar.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

5452 PRECISION AND POWER DR, APO, AE, 09309-9998, USA

Set-Aside

NONE

Documents

(1)

SPE7M8-26-T-6443.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUSA
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,TOGGLE
SWITCH,LEVER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLIES.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC SPEC NR MS27788F REVISION NR F DTD 02/14/2024 PART PIECE NUMBER: MS27788-31E
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-3950L REVISION NR L DTD 12/21/2022 PART PIECE NUMBER: MS27788-31E
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M8-26-T-6443
SECTION B
PR: 7018226691 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018226691 0001 EA 1.000
NSN/MATERIAL:5930014116221
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB4804
FB4804 379 ELRS LGRDDC
CP 011 974 458 9555 EXT 436 0467
5452 PRECISION AND POWER DR
APO AE 09309-9998
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB4804
FB4804 USCENTCOM US AIR FORCE 379
CP 011 974 458 9555 EXT 455 5862
5452 PRECISION AND POWER DRIVE
AL UDEID AB
QA
M/F: (TCN) FB480462440005
RDD: 777
PROJ: TP 2
SUPP ADD: YBQ421 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:09/04/2026
SPE7M8-26-T-6443
SECTION B
PR: 7018226691 PRLI: 0001 CONT’D

SPE7M8-26-T-6443 NSN/Part Number: 5930-01-411-6221 Quantity: 1 EA Purchase Request: 7018226691QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
SWITCH, LEVER
Solicitation # SPE7M8-26-T-6324
Solicitation SPE7M8-26-T-6324 is a fixed-price request for quotation issued by the DLA Land and Maritime Electrical Devices Division for the procurement of 19 lever switches, identified by NSN 5930-01-389-3080. This opportunity is designated as a small business set-aside under NAICS code 335932. The required delivery is 102 days after receipt of order, with shipping terms set as FOB Origin and the delivery destination located in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, specifically referencing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Offerors proposing alternate parts must provide a complete data package for both the approved and alternate components. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is subject to the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.
ELECTRICAL DEVICES DIV

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-28CU
This contract is for the procurement of electrical insulation sleeving, specifically part number M23053/1-206-0 under NSN 5970-01-085-2845. The requirement specifies a quantity of 38 feet with a delivery window of 5 days. The item is designated as a critical application item and must be sourced from an accredited manufacturer or distributor listed on the Performance Review Institute PRI Qualified Manufacturers List or Qualified Products List. Compliance requirements include adherence to SAE-AS23053 standards and DLA packaging and marking regulations. The contractor must maintain supply chain traceability documentation and ensure that no mercury is intentionally added to the hardware. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, and the product must maintain at least 85 percent of its 12-month shelf life upon receipt. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
INSULATING COMPOUND, EL
Solicitation # SPE4A0-26-T-4751
This contract is for the procurement of electrical insulating compound, identified as a commercial off the shelf item under NSN 5970010138611 and specification MIL-I-46058C. The requirement is split across three line items totaling 8 quarts, with deliveries destined for Naval Beach Unit Seven in Japan, NAVSUP FLC Mayport in Florida, and the USS Ronald Reagan. The items are classified as DOT Class 3 hazardous materials, specifically resin solutions, and require strict adherence to hazardous communication standards, including the submission and approval of SDS and hazard warning labels by technical personnel prior to award. Key technical requirements include a non-extendable shelf life of 18 months and compliance with QPL 46058. The contract mandates that mercury shall not be intentionally added to the supplies. Quality assurance involves inspection and acceptance at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with a required delivery timeframe of five days after order.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
SPACER, SPECIAL SHAPED
Solicitation # SPE4A7-26-T-725B
This contract is a solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of seven special shaped spacers under NSN 5365-01-467-7731. The delivery requirement is set for 171 days after the order is placed. The procurement is governed by the DLA Master List of Technical and Quality Requirements, incorporating specific standards for packaging, physical item marking, and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a focus on zero-based sampling plans and specific verification levels for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory training to access technical data. Inspection and acceptance are to be conducted at the origin.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M0-26-T-079J
This contract is for the procurement of one distribution box, identified by NSN 6110-99-459-9801 and part number MUA7407080 from HIAB Limited. The order is managed under solicitation SPE7M0-26-T-079J by the Department of Defense Maritime Supply Chain ESOC Buys. Delivery is required within five days of the order, with a required delivery date of September 8, 2026. The shipment is designated as an NMCS shipment and must be sent via the fastest traceable means to the 0087 CS BN CO A Composite at Fort Stewart, Georgia. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, while ensuring all technical and quality requirements from the DLA Master List are met. Terms include FOB Origin with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE4A6-26-T-27WP
This contract is for the procurement of 64 units of electrical insulation sheets, identified as National Stock Number 5970-01-614-8040 and part number NKN33302 by EIS Legacy LLC. The item is classified as a commercial off the shelf product and a critical application item with no shelf life requirement. Delivery is set for 171 days after order, with a required delivery date of January 5, 2027, and a need ship date of March 8, 2027. The agreement specifies that shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. Compliance is required for several technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract also incorporates DLA master list requirements for packaging and source approval requests, ensuring strict adherence to government procurement and documentation standards.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-27WV
This contract is for the procurement of 164 units of electrical insulation sleeving, identified by NSN 5970-01-667-0532 and TE Connectivity part number HRHT-2/2. The item is classified as a commercial product with a minimum order quantity of 25 pieces per pack and is produced as made-to-order. Delivery is required within 171 days, with a required delivery date of December 21, 2026, and a need ship date of March 8, 2027. The agreement specifies that shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, and packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract incorporates specific technical and quality requirements under RA001, RP001, and RQ011 and RQ017.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-27ZW
This contract is for the procurement of 511 units of electrical insulation sleeving, specifically Brady USA Inc industrial product part number 3PS-250-2-YL under NSN 5970016165848. The order is managed by the Department of Defense ASC Commodities Division with a required delivery date of February 23, 2027, and a delivery window of 171 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and technical standards, including RP001 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Depending on the hazardous material status per FED-STD-313, packaging must either follow TQ requirement IP025 or ASTM D3951, though DLA Master List requirements take precedence over commercial standards.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
JUNCTION BOX
Solicitation # SPE4A7-26-T-726D
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of one junction box under NSN 5975-01-597-5840. The contract requires delivery within 171 days after the order is placed and specifies that the place of performance is in Tracy, California. The procurement is governed by NAICS code 335932 and follows specific DLA packaging and quality requirements. Compliance is mandatory regarding the handling of covered defense information and the export control of technical data under ITAR and EAR regulations. Technical data access is restricted to approved contractors with US/Canada Joint Certification Program certification. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots unless otherwise specified.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
SPLICING KIT, RADIO FRE
Solicitation # SPE4A7-26-T-725W
This contract is for the procurement of eight radio frequency cable splicing kits, identified by NSN 5975-01-608-0233 and Triumph Controls part number 90044-00. The delivery is required within 171 days, with a need ship date of March 8, 2027, and a final required delivery date of March 20, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1. Each kit must be contained in a single box with a detailed contents list and appropriate cushioning to prevent damage. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE4A6-26-T-27RL
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
MOUNTING BASE, ELECTRIC
Solicitation # SPE4A7-26-T-726A
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335314
New
DIBBS
SWITCH SUBASSEMBLY
Solicitation # SPE7M8-26-T-6449
This contract is for the procurement of eight switch subassemblies under solicitation SPE7M8-26-T-6449 for the Department of Defense Electrical Devices Division. The required items are identified by NSN 5930013468392 and correspond to Teradyne part number 801-441-00 or Schneider Electric USA part number 9001 D1M2Z. This is designated as a critical application item with a delivery window of 92 days, a need ship date of January 13, 2026, and an original required delivery date of February 21, 2026. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements RP001 and MIL-STD-129 is mandatory, with specific instructions for both hazardous and non-hazardous materials. All technical and quality requirements are governed by the DLA Master List, and the contract maintains a strict zero percent quantity variance.
Relay and Industrial Control Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-6448
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6448, is for the procurement of one switch assembly with national stock number 5930-01-668-5976. The contract requires delivery within 20 days after the order is placed and adheres to NAICS code 335313. The agreement incorporates specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to provide a complete data package for both approved and alternate parts.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
GUARD, SWITCH
Solicitation # SPE7M8-26-T-6322
Solicitation SPE7M8-26-T-6322 is a fixed-price request for quotations issued by the DLA Land and Maritime Electrical Devices Division for the procurement of 144 units of Guard, Switch (NSN 5930-00-776-6916). The requirement specifies delivery within 160 days after receipt of order, with a need ship date of February 16, 2027, and a final required delivery date of April 17, 2027. Delivery, inspection, and acceptance are all designated as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The items must be produced in accordance with TDP Rev C Gen 3 and specific basic and reference drawings, including drawing 19207 10883897 Revision B. This procurement is not a small business set-aside and requires strict adherence to export control regulations. Technical data is subject to ITAR or EAR restrictions, and access is limited to DLA contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Compliance with the Buy American Act and the Berry Amendment is required, and any offers based on non-domestic materials must be disclosed. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-6296
Solicitation SPE7M8-26-T-6296, issued by the DLA Land and Maritime Electrical Devices Division, is a request for quotes for 25 toggle switches under NSN 5930-01-441-6684. The requirement is categorized under NAICS code 334419 and is subject to a delivery period of 153 days after order, with a required delivery date of February 9, 2027. Delivery is set as FOB Origin to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contract incorporates several technical and quality requirements, including RP001 for packaging, RA001 for DLA master list compliance, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to MIL-STD-129 for marking and ASTM D3951 for non-hazardous materials, or TQ requirement IP025 for hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, offerors must comply with the Buy American Act, the Berry Amendment, and various FAR/DFARS clauses regarding equal opportunity and the prohibition of covered defense telecommunications equipment.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6442
This contract, identified as SPE7M8-26-T-6442, is for the procurement of two rotary switches, part number 0101-R030M-12-UPJ-AR16 by Illinois Tool Works Inc, under NSN 5930-01-172-8546. The delivery is required within 20 days after order, with a required delivery date of September 3, 2026. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination in Norfolk, Virginia. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and prohibits the intentional addition of mercury except where functionally required. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. All shipments must be sent via the fastest traceable means, and parcel post is explicitly prohibited.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-6261
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of eight flow switches under National Stock Number 5930-01-047-7019. The contract requires delivery within 107 days after the order is placed and specifies performance at Tinker AFB. The solicitation was posted on August 26, 2026, with a response deadline of September 8, 2026. The agreement incorporates specific technical and quality requirements as defined in the DLA Master List, including strict adherence to packaging requirements and the removal of government identification from any non-accepted supplies. Offerors are required to provide a complete data package for both approved and alternate parts. The primary point of contact for this acquisition is Dawn MacLean.
Relay and Industrial Control Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6445
This solicitation, issued by the Department of Defense Electrical Devices Division under number SPE7M8-26-T-6445, is for the procurement of one push switch, identified by NSN 5930-01-415-3711. The contract requires delivery within 20 days after receipt of the order and is subject to specific DLA packaging requirements and the removal of government identification from non-accepted supplies. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and regulations regarding covered defense information is mandatory. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and any alternate offers must be accompanied by a SAR statement.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6437
This solicitation, issued by the Department of Defense Electrical Devices Division under number SPE7M8-26-T-6437, is for the procurement of 1,241 push switches, identified by NSN 5930-00-933-6815. The contract requires delivery within 78 days after receipt of order and specifies performance in New Cumberland, Pennsylvania. The agreement includes strict compliance mandates, including CMMC Level 2 certification for third-party assessment and adherence to Covered Defense Information standards. It prohibits the use of Class I ozone-depleting chemicals and mandates strict export control of technical data under ITAR and EAR regulations. Additionally, contractors must follow DLA packaging requirements and ensure the removal of government identification from any non-accepted supplies.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-3761
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-3761, is for the procurement of 11 pressure switches identified by NSN/Part Number 5930-01-557-7711. The contract falls under NAICS code 335931 and requires adherence to RP001 DLA packaging requirements. The delivery timeline is set for 43 days after the order is received. Performance of the contract will take place in New Cumberland, Pennsylvania. The response deadline for this federal solicitation is September 11, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6436
This contract is for the procurement of one rotary switch, identified by NSN 5930016813525 and part number 1CH/15000 from Saab Inc. The order is managed under solicitation SPE7M8-26-T-6436 by the Department of Defense Electrical Devices Division. Delivery is required within 20 days, with a required delivery date of August 27, 2026, and the shipment is destined for the USS Pierre (LCS 38). The agreement mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-DTL-28786 for switch preservation. Marking must comply with MIL-STD-129, and palletization must follow RP001 guidelines. The contract specifies FOB Origin shipping, with inspection and acceptance occurring at the destination. Shipping must be handled via the fastest traceable means, specifically prohibiting the use of parcel post.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-6208
Solicitation SPE7M8-26-T-6208, issued by the DLA Land and Maritime Electrical Devices Division, is a total small business set-aside under NAICS code 334419 for the procurement of 87 toggle switches, identified by NSN 5930015629246. The requirement specifies a delivery period of 160 days, with a need ship date of February 16, 2027, and an original required delivery date of March 30, 2027. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. All technical and quality requirements identified by R or I numbers in the DLA Master List take precedence over commercial packaging standards.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS