Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Synthetic Rubber and Cork Sheet Manufacturer/Supplier

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of synthetic rubber and cork sheets for prime contractors supporting DLA Weapons Support projects. The materials must strictly conform to SAE AMS-C-6183B Revision B and NAVSEA 5100-003D standards to ensure proper mercury containment. Each order consists of eight sheets under NSN 5330013084931, which must be marked according to MIL-STD-129 and sealed in waterproof, greaseproof, opaque bags as specified by MIL-DTL-117. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance located in Tracy, California. Compliance with the Buy American Act and the Berry Amendment is mandatory for all supplied materials. Interested parties should note the response deadline of October 26, 2026, for this requirement categorized under NAICS code 326199.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

326199 - All Other Plastics Product Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-0959.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CORK AND RUBBER SHEET

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies synthetic rubber and cork sheets for prime contractors on DLA Weapons Support projects. Manufactures material conforming to SAE AMS-C-6183B Revision B and NAVSEA 5100-003D for mercury containment. Seals items in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Adheres to Buy American Act and Berry Amendment. Delivers eight sheets of cork and rubber (NSN: 5330013084931) marked per MIL-STD-129.

Similar Contracts

Same NAICS industry code

Supplier of High/Low Density Polyethylene Dimensional LumberThis subcontract involves the supply of eight units of brown plastic dimensional lumber for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The required materials must be 2x6 inch, 12-foot length lumber manufactured from commingled high and low density polyethylene with a rough, grainy texture, adhering strictly to NSN 5675-01-445-6049. All deliverables must be shipped to Fort Drum, New York. To ensure compliance, the supplier must meet the standards set by the Buy American Act, the Berry Amendment, ASTM D3951, and MIL-STD-129. This opportunity falls under NAICS code 326199 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of October 26, 2026.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Supplier of SAE AS23053/5 Electrical Insulation SleevingThis subcontract involves the supply of 2,778 feet of Type II Code 9 electrical insulation sleeving to support prime contractors for the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to SAE AS23053/5 Revision A and QPL-AS23053-QPD standards, specifically meeting NSN 5970-00-983-7970. All deliverables must be packaged according to MIL-STD-2073-1E and delivered to Hill AFB. To be eligible, the provider must be an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The opportunity is categorized under NAICS code 326199, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

PRI-Qualified O-Ring ManufacturerThis subcontract involves the manufacture and delivery of 848 O-rings for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-00-298-9984 specifications and require PRI Qualified Products List approval. All delivered components must be certified as asbestos-free, contain no intentionally added mercury, and adhere to MIL-STD-130N marking standards. The project requires strict compliance with the Buy American Act and the Berry Amendment. Performance will take place at Robins Air Force Base. Interested parties should note the response deadline of October 26, 2026, for this requirement categorized under NAICS code 326199.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Supplier of Rubber Adhesive Tape (NSN 9320015084940)This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the supply of 59 rolls of 2-inch 3M Company rubber adhesive tape, part number 4646. The materials must have a minimum shelf life of 24 months, contain no mercury, and comply with Buy American standards. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 326199. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Manufacturing and Supply of Nonmetallic Special Shaped Section Seals

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Aerospace Grade Resin and Glass Fabric SupplyThis subcontract involves the supply of certified aerospace-grade raw materials, specifically BMS8-80 polyester resin and BMS9-3 glass fabric, for prime contractors working on DLA Weapons Support ASC projects. The performance of the contract will take place at Tinker AFB, and the supplier is required to provide full material certifications to ensure all deliverables meet strict Boeing and DLA specifications. The agreement mandates strict adherence to the Buy American and Balance of Payments Program under DFARS 252.225-7001. Managed by the Department of Defense under NAICS code 326199, the procurement process began on October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Nonmetallic Special Shaped Section SealsThis subcontract involves the manufacturing of 32 units of Nonmetallic Special Shaped Section Seals, identified by NSN 5330-01-410-9795, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process must adhere to TDP Rev A Gen 1 and ASTM D2000 standards, utilizing precision molding or extrusion equipment to ensure all materials are asbestos-free. The project is managed under the Department of Defense and requires strict compliance with the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Grommet Supplier (NSN 5325-01-049-4183)This subcontract involves the supply of 33 nonmetallic grommets, identified by NSN 5325-01-049-4183, to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The selected supplier is responsible for manufacturing or sourcing the items in accordance with the DLA Master List of Technical and Quality Requirements, with final delivery to Tinker AFB. Strict adherence to quality and regulatory standards is required, including quality inspections per SAE AS9003 or ISO 9001 and packaging compliant with ASTM D3951 and MIL-STD-129. Additionally, the contractor must maintain CMMC Level 2, ITAR, and EAR compliance to meet Department of Defense security and trade requirements.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Parker-Hannifin O-Rings (NSN 5331-01-502-3301)This subcontract involves the procurement or manufacture of 400 O-rings for prime contractors supporting Navsup Weapon Systems Support Mech projects. The required components are Part Number 30-1595 or the alternate 70-3411 manufactured by Parker-Hannifin Corporation. All delivered items must maintain at least 85 percent of their 180-month shelf life and be delivered FOB Destination. The contractor is responsible for adhering to strict packaging and labeling standards, specifically MIL-STD-2073-1 or ASTM D3951-18 for packaging and MIL-STD-129 for labeling. Additionally, the supplier must provide a Certificate of Compliance and a cure date certificate to ensure quality and regulatory adherence.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

Hybrid Gasket Manufacturing (NIIN 016813072)This subcontract involves the manufacture and supply of Hybrid Gaskets (NIIN 016813072) for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for fabricating gaskets in strict accordance with Technical Data Package version O05 and Individual Repair Part Ordering Data, ensuring all finished products are delivered with fresh shelf life dates. Operational requirements include the implementation of cleanliness control systems that meet MIL-STD-767 and MIL-STD-2041 standards. Additionally, the provider must adhere to MIL-I-45208 quality standards and maintain CMMC compliance. The opportunity is categorized under NAICS code 326199, with a response deadline set for November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

Specialized Seals and O-Rings for Hand Pump AssemblyThis subcontract opportunity, managed by the Department of Defense under the Army Contracting Command – Detroit Arsenal, involves the supply of high-performance seals, gaskets, and O-rings for M1 Abrams weapons system projects. The selected provider will be responsible for molding and sourcing chemical-resistant and pressure-resistant components using specialized polymers or elastomers, specifically delivering seal and gasket kits for 405-810 pump assemblies. To ensure environmental durability and quality control, a Certificate of Conformance must be provided for every material batch. The procurement is designated as a total Small Business Set Aside under NAICS code 326199. Interested parties must submit their responses by October 30, 2026, to support prime contractors in maintaining the operational integrity of critical military hardware.

POSTED

about 12 hours ago

DEADLINE

Nylon Stuffing Tube SupplierThis subcontract opportunity is for a supplier to provide nylon packing and stuffing tubes to prime contractors working on UNICOR Federal Prison Industries projects under the Department of Justice. The specific requirement is for Tube Size 1 nylon stuffing tubes, part number HWS0303 (M,M19622/16-0004), featuring a bushing inner diameter of 0.234 inches. The selected supplier will be responsible for the delivery of these components and may be required to provide an OEC Certificate of Conformance. The procurement is designated as a total Small Business Set Aside under NAICS code 326199. Interested parties must respond by October 20, 2026, for performance located in zip code 62959.

Inc Federal Prison Industries

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work involves providing specialized military packaging, marking, and shipping services, ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards while implementing DLA requirements RP001. The contractor is responsible for utilizing MIL-SPEC crates and moisture barriers to prepare shipments for FOB Destination delivery. The project is managed under NAICS code 488510 for the Department of Defense. All fully packaged and marked shipments are to be delivered to FPO AE 09573. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Helical Compression Spring Supplier (NSN 5360015039972)This subcontract involves the supply of one helical compression spring for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt project. The supplier is responsible for manufacturing or sourcing the component in strict accordance with NSN 5360015039972 and the DLA Master List of Technical and Quality Requirements. To ensure compliance, all spring winding machinery and materials used must adhere to the Buy American Act and the Berry Amendment. The project falls under NAICS code 332613, with a response deadline set for October 26, 2026, and performance located at FPO 09573.

Spring Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract opportunity, titled Military-Grade Packaging and Marking Services, is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contract involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. Requirements include packaging components according to RP001 standards and marking shipments in compliance with MIL-STD-129 and ASTM D3951. The service provider must utilize MIL-SPEC materials and labeling equipment to ensure shipments are ready for transport under FOB Origin terms. This is a Total Small Business Set-Aside under NAICS code 493110. The solicitation was posted on October 15, 2026, with a response deadline of October 30, 2026. Interested parties can find further details through the DIBBS portal.

General Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Vehicle Spring Hanger ManufacturingThis subcontract opportunity is for the manufacture of vehicle spring hangers, specifically part number 16-18353-000 under NSN 2510015768718, to support prime contractors delivering for the Department of Defense DLA Weapons Support Land Supplier Operations. The project requires strict adherence to the DLA Master List of Technical and Quality Requirements, and all materials must be compliant with the Buy American Act and the Berry Amendment. Additionally, the selected provider must meet NIST SP 800-171 cybersecurity standards to ensure data protection. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390. Interested parties must submit their responses by October 30, 2026, following the posting date of October 15, 2026. The primary objective is the delivery of finished vehicle spring hangers that meet all specified military and federal quality standards.

Other Motor Vehicle Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 2590016945732)

POSTED

about 7 hours ago

DEADLINE

Special Purpose Borosilicate Glass Fiber Insulation SupplierThis subcontract opportunity is a Service-Disabled Veteran-Owned Small Business set-aside for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The selected supplier will manufacture and deliver 55 specialized borosilicate glass fiber thermal insulation sheets measuring 36 by 60 inches with a half-inch thickness, a density of 6 lbs, and UV resistance. All materials must be packaged in waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 standards and delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. To be eligible for this contract, the supplier must maintain ISO 9001:2015 certification and demonstrate CMMC Level 2 compliance. The procurement falls under NAICS code 327213. Interested parties must submit their responses by October 26, 2026.

Glass Container Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Direct Action Shock Absorbers

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

MIL-DTL-117 Waterproof/Greaseproof PackagingThis subcontract involves providing specialized military-grade packaging services for prime contractors supporting DLA supply contracts. The primary scope of work requires sealing sensitive gaskets in medium-duty, waterproof, and greaseproof opaque bags to prevent deterioration from ultraviolet rays. All operations must be performed using industrial sealing equipment and materials that strictly adhere to MIL-DTL-117 specifications. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in Cherry Point, North Carolina, under NAICS code 561910. The response deadline for this opportunity is October 26, 2026.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Supply of Pratt & Whitney Gaskets (NSN 5330015378292)This subcontract involves the procurement and delivery of 32 precision gaskets, specifically Part Number 3039944 from Pratt & Whitney Canada Corp, identified by NSN 5330015378292. The items are to be delivered FOB Origin to DLA Distribution Cherry Point, North Carolina, under the agency oversight of the Department of Defense DLA Weapons Support Land Supplier Operations. Compliance requirements include strict adherence to the Buy American Act and the application of quality sampling methods MIL-STD-1916 or ASQ H1331. Additionally, the contractor must provide a CMMC Level 2 Self-Assessment. The opportunity is categorized under NAICS code 423840, with a response deadline set for October 26, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging for Rubber/Polymer ComponentsThis subcontract involves providing specialized packaging and sealing services for rubber and polymer components supporting DLA Weapons Support Land Supplier Ops projects. The scope of work requires sealing gaskets in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. All items must be processed using industrial vacuum and heat sealing systems to ensure a shelf life of 180 months. The contractor is responsible for applying all necessary markings and labels following MIL-STD-129 and MIL-STD-130N standards. Performance for this Department of Defense project will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Asbestos-Free Gaskets (NSN 5330-00-700-6237)This subcontract involves the manufacture and supply of 715 asbestos-free gaskets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Ops. The contractor is responsible for fabricating parts according to NSN 5330-00-700-6237 specifications using precision molding and cutting equipment. All deliverables must adhere to strict quality conformance standards per RQ006 and sampling protocols defined by MIL-STD-1916 or ASQ H1331. The project requires full compliance with the Buy American Act and the Berry Amendment to ensure domestic sourcing. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this requirement categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ProviderThis subcontract involves providing specialized military-grade packaging and preservation services for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The scope of work requires the sealing of rubber components in medium-duty, waterproof, greaseproof, and opaque bags to prevent UV degradation in accordance with MIL-DTL-117. The provider must execute preservation following MIL-STD-2073-1E Method 33 and ensure all marking adheres to MIL-STD-129. The final deliverable consists of 194 individually packaged and labeled gaskets. Performance for this contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS