Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Tamperproof Hardware Supply and Installation

Active

State & Local

Response Deadline11/17/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and installation of tamperproof metal fasteners for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work requires the installation of either 9-gauge steel or 16-gauge die-formed steel fasteners on panels and consoles, utilizing high-strength screw-thread adhesive sealants such as 3M Scotch-Weld or Loctite 243. In addition to the installation of the security hardware, the contractor is responsible for delivering ten complete sets of manual drive tools. The opportunity is categorized under NAICS code 238120, with a response deadline set for November 17, 2026.

General Info

Supply and install tamperproof metal fasteners for California Department of Corrections facility projects.

Agency

California Department of Corrections & Rehabilitation

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of C5613538-D.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

C5613538-D - Fire Alarm System Installation Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia Department of Corrections & Rehabilitation

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia Department of Corrections & Rehabilitation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs tamperproof metal fasteners for prime contractors on CDCR facility projects. Installs 9-gauge steel or 16-gauge die-formed steel fasteners on consoles and panels using screw-thread adhesive sealant such as Loctite 243 or 3M Scotch-Weld. Delivers installed security hardware and ten complete sets of manual drive tools.

Similar Contracts

Same NAICS industry code

Emergency Rail Defect Response and RepairThis subcontract for the Hamilton-Oshawa Port Authority focuses on providing rapid-response site assessment and repair services for emergency rail defects. The selected provider will support prime contractors by ensuring site assessments are conducted within two hours of a report and repair crews, including rail siding flagging, are deployed within four hours. Key operational requirements include the ability to coordinate directly with CN and CP Trainmasters to manage rail traffic and safety. The contractor is responsible for delivering detailed emergency site assessment reports and completing all necessary repairs to maintain rail infrastructure integrity.

Hamilton-Oshawa Port Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Compromise Bar Supply and InstallationThis subcontract involves the supply and installation of compromise bars to facilitate transitions between different rail weights for prime contractors working on Hamilton-Oshawa Port Authority rail maintenance projects. The scope of work specifically focuses on the installation of compromise bars for transitions between 115# and 100# rail. The selected provider must maintain valid WSIB Clearance to perform the work. Interested parties must submit their responses by the deadline of November 18, 2026, for this project categorized under NAICS code 238120.

Hamilton-Oshawa Port Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Rail Tie Installation and DisposalThis subcontract for the Hamilton-Oshawa Port Authority involves the supply and installation of new hardwood ties and associated hardware for rail maintenance projects. The scope of work includes the installation of hardwood THW No.1 ties, CN plates, and spikes, as well as track bed tampering and the hauling and disposal of old materials. The selected provider must deliver fully installed and tamped rail ties while maintaining valid WSIB Clearance and a Certificate of Insurance. Interested parties must submit their responses by the deadline of November 18, 2026.

Hamilton-Oshawa Port Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Thermite Rail Welding ServicesThis subcontract for Thermite Rail Welding Services involves providing specialized welding to repair or join rail sections for prime contractors on Hamilton-Oshawa Port Authority rail maintenance projects. The scope of work requires the use of specialized welding kits, molds, and grinding equipment to deliver completed thermite welds. To qualify, the provider must employ certified rail welders and maintain strict adherence to all safety audits mandated by the Hamilton-Oshawa Port Authority. The solicitation was posted on October 15, 2026, with a response deadline of November 18, 2026, falling under NAICS code 238120.

Hamilton-Oshawa Port Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Marine Painting and PreservationThis subcontract for Marine Painting and Preservation involves providing surface preparation and protective coating services for U.S. Coast Guard vessel projects under the Department of Homeland Security. The scope of work requires 100% preservation of critical areas, including the underwater body, hull plating freeboard, exterior main decks, superstructure, mast, and stern tube interior surfaces, to deliver a fully preserved and coated vessel. The project will be performed in San Francisco under NAICS code 238120. Interested parties must submit their responses by November 4, 2026, for this opportunity managed by the CG-SEA-C21 agency office.

POSTED

about 16 hours ago

DEADLINE

Structural Steel and Equipment SupportThis subcontract opportunity involves providing structural steel and equipment support services for VA Medical Center facility projects in Augusta. The selected contractor will work under prime contractors to perform structural alterations, modify existing structural members, and fabricate and install supports for new heavy infrastructure equipment. The primary deliverables include certified structural supports and modified frames. The project is managed by the Department of Veterans Affairs under the agency Pcac. Interested parties must note that the response deadline is October 30, 2026. The work falls under NAICS code 238120, focusing on structural steel erection and modification to ensure the facility can safely accommodate critical medical infrastructure.

POSTED

about 16 hours ago

DEADLINE

Structural Modifications for ClarifiersThis subcontract opportunity involves performing structural modifications for prime contractors at the City of Palm Springs wastewater treatment plant. The scope of work focuses on modifying existing clarifier walls and supports to accommodate the installation of new aluminum covers, utilizing structural steel or concrete to ensure all supports are structurally sound and meet project specifications. The project is located in Palm Springs, California, under NAICS code 238120. Interested parties must submit their responses by the deadline of November 9, 2026.

City of Palm Springs

POSTED

about 24 hours ago

DEADLINE

Pre-Engineered Metal Building Supply and InstallationThis subcontract agreement involves the supply and installation of a 40 by 50 foot pre-engineered metal building for prime contractors working on Kemper County Board of Supervisors facility projects. The scope of work includes the fabrication and delivery of the building kit, as well as the assembly and erection of the primary and secondary structural steel frames, wall panels, and roof panels, ensuring a final eave height of 14 feet. Managed under the agency MPTAP in Mississippi, the project falls under NAICS code 238120. The solicitation was posted on October 14, 2026, with a response deadline set for October 23, 2026. The final deliverable for this contract is the completed and fully erected building shell.

POSTED

DEADLINE

Woodcroft Substation Fence Replacement

Solicitation # 203666

EPCOR Distribution and Transmission Inc. has issued solicitation number 203666 for the Woodcroft Substation Fence Replacement project in Edmonton, Alberta. The scope of work requires a successful proponent to provide all labor, materials, and equipment to demolish the existing chain link fence and foundations and install a new precast concrete fence. Additionally, the contractor must replace existing chain link gates with no cut, no climb style gates that are compatible with EPCOR’s Abloy PLLW342T paddocks. The project timeline specifies mobilization by December 7, 2026, with construction completion and final certification targeted for January 30, 2027. To be eligible, proponents must attend a mandatory site visit and submit their electronic reply via the EPCOR Bidding System by November 6, 2026. Key deliverables include a master schedule and inspection test plans due one week after the contract award. Proponents must provide a current Workers Compensation Board clearance letter and adhere to strict health, safety, and environment policies, including the use of arc-flash rated clothing and ohm-rated boots. Evaluation is based on mandatory criteria and confidential ratings, with specific requirements for Indigenous relations certifications such as PAIR. The contract may also require a CCDC 221 Performance Bond upon award.

POSTED

DEADLINE

Solicitation # CAP26-0258

Solicitation CAP26-0258 is a stipulated sum construction project for the installation of a new roof deck support structure and roof replacement for Building 55A at the Oklahoma Department of Human Services Human Services Center located at 401 W Commerce, Oklahoma City. The project scope includes structural support installation and roofing work, with bidders providing pricing for a base bid and an alternate for a Thermoplastic Polyolefin (TPO) roofing system versus Modified Bitumen. The estimated cost for the project is 1,250,000.00 dollars, and the performance period is established at 270 calendar days. The contract will be awarded to the lowest responsible and responsive bidder. Bidders must submit a completed bid form, CAP Form A305 Contractor Qualification Statement, and bid security of 5 percent for bids exceeding 100,000 dollars. Awarded contractors are required to provide performance, payment, and defect bonds for 100 percent of the contract value. Technical requirements mandate compliance with the 2018 IBC, IEBC, and 2010 ADA Standards, with specific preservation standards for lumber and daily waste removal. Project administration is managed by a Consultant who oversees quality control, mock-up approvals, and the processing of electronic invoices.

State of Oklahoma, Division of Capital Assets Management, Construction & Properties

POSTED

DEADLINE

Marine Hull Coating & PaintingThis subcontract opportunity, titled Marine Hull Coating and Painting, is issued by the Department of Defense under the W075 Endist San Fran agency. The project involves providing specialized hull cleaning and protective coating services for prime contractors working on USACE marine projects. The scope of work includes scraping and blasting all-welded steel hulls, applying marine-grade anti-fouling paints, and renewing zinc anodes to ensure comprehensive corrosion protection. The final deliverable for this contract is a fully cleaned and painted hull with new zinc anodes installed. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of November 16, 2026. The work falls under NAICS code 238120.

W075 Endist San Fran

POSTED

DEADLINE

in about 1 month

Ballistic Containment and Steel FabricationThis subcontract for the Special Mission Training Center under the Department of Homeland Security involves the fabrication and installation of ballistic wall systems and structural steel framing at Camp Lejeune. The scope of work requires the use of 3/8 inch AR500-class plate to construct the walls and the installation of a three-level training tower reaching approximately 30 feet in elevation, complete with a steel weather cover. To ensure durability in a coastal environment, all components must be treated with corrosion-resistant coatings. The project falls under NAICS code 238120 and is designated for prime contractors managing US Coast Guard training facility projects. The final deliverable is a fully installed ballistic wall system and supporting frame. Interested parties should note the response deadline of November 15, 2026.

Special Mission Training Center (smtc)

POSTED

DEADLINE

in about 1 month

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

Specialized Occupational Health and Safety InstructionThis subcontract for Specialized Occupational Health and Safety Instruction involves providing expert safety training for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work focuses on delivering critical instruction in NFPA 70E electrical safety, Lockout/Tag out energy control, basic accident investigation, and Bloodborne Pathogens Exposure Control. All training must strictly adhere to Cal/OSHA and NFPA 70E standards, with the contractor required to provide exposure plan templates and official training completion records. The project is associated with NAICS code 611519 and is designated for performance in Amador. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 15, 2026. This engagement ensures that personnel operating within CDCR facilities maintain high safety compliance and operational standards.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

Cal/OSHA Construction Safety CertificationThis subcontract focuses on the delivery of mandated Cal/OSHA safety training and certification for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes providing Cal/OSHA 10-Hour Certification, which covers personal protective equipment and Focus Four hazards, as well as Cal/OSHA 30 for Construction tailored for supervisors to address inspections and penalties. All training must adhere to strict Cal/OSHA compliance standards, and the provider is responsible for delivering official completion cards for both the 10-hour and 30-hour courses. The project is associated with NAICS code 611519 and will be performed in Amador. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026. This effort ensures that all personnel on CDCR project sites meet the necessary safety certifications required by the state of California.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

Aerial and Material Handling Equipment Certification TrainingThis subcontract focuses on providing operator certification training and testing for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes conducting certification classes for specific equipment, namely aerial boom lifts, scissor lifts, rough terrain telehandlers, and standard forklifts, culminating in the delivery of valid operator certifications for all trained personnel. To ensure quality and safety, all trainers must hold a current certification from the IVES Training and Compliance Group Inc. or an equivalent recognized body. The project is associated with NAICS code 611519 and is designated for performance in Amador, California, with a response deadline set for November 5, 2026.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

C5613670-D, Statewide Safety Training Services

Solicitation # C5613670-D

The California Department of Corrections and Rehabilitation (CDCR) is soliciting bids for Statewide Safety Training Services to support the Correctional Construction Mentorship Program (CCM). With an estimated value of 2,400,000.00 dollars, the contract is projected to run from January 1, 2027, to December 31, 2029. The selected contractor will provide as-needed safety and health training across various CDCR institutions in Northern, Central, and Southern California. Compensation is based on a rate sheet that must cover all equipment, materials, supplies, permits, licenses, insurance, and travel expenses. The scope of work includes delivering Cal/OSHA 10-hour and 30-hour construction certifications, as well as specialized one-day courses in accident investigation, NFPA 70E electrical safety standards, lockout/tag out, and bloodborne pathogens exposure control. Additionally, the contractor must provide operator certifications for aerial boom lifts and scissor lifts, requiring trainers to hold current certification from IVES Training and Compliance Group Inc. or an equivalent entity. The contract will be awarded to the lowest responsible bidder, with price reduction incentives available for certified Disabled Veteran Business Enterprise (DVBE) participation up to 5 percent and a 5 percent preference for Small/Micro Business enterprises. Bidders must provide proof of Commercial General Liability insurance of at least 1,000,000.00 dollars per occurrence, as well as automobile and worker's compensation coverage. Submissions are due by November 5, 2026, and must include a signed Bidder Acknowledgement/Certification, the completed rate sheet, and standard contractor certification clauses.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

C5613445-D American Sign Language (ASL) In-Person Interpreting (IPI) Services

Solicitation # C5613445-D

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Roof Insulation and Protection Board SupplyThis subcontract opportunity involves the supply and delivery of roof insulation and protection board layers for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes providing Extruded Polystyrene, Expanded Polystyrene, or Polyisocyanate insulation, as well as tapered insulation, crickets, and half-inch protection roof boards. All provided materials must be part of an FMGI approved RoofNav assembly. The solicitation was posted on October 15, 2026, with a response deadline of December 17, 2026. Falling under NAICS code 326111, the contract requires the supplier to manage the delivery of all insulation boards directly to the project sites. Interested parties can find further details through the Cal eProcure portal.

Plastics Bag and Pouch Manufacturing

POSTED

DEADLINE

Roofing Adhesives and Sealants SupplyThis subcontract involves the supply of roofing adhesives and sealants for prime contractors working on California Department of Corrections & Rehabilitation facility projects. The scope of work includes providing membrane adhesive with a coverage rate of 100 square feet per gallon and insulation adhesive that complies with FM Global Property Loss Prevention Data Sheets 1-29 and 1-49. The selected provider is responsible for delivering all materials to the project site and must provide a printed statement detailing the VOC content of the products. This opportunity is categorized under NAICS code 238160, with a response deadline set for December 17, 2026.

Roofing Contractors

POSTED

DEADLINE

Roof Coping and Flashing FabricationThis subcontract involves the fabrication and supply of custom coping metal and flashing for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work requires the production of 25-gauge G90 galvanized steel sheets laminated to a non-reinforced membrane in soft white, along with manufacturer standard sheet flashing with a minimum thickness of 60 mil. All materials must be delivered according to the specific requirements outlined in Spec sheet detail A-8-0.4. The opportunity is categorized under NAICS code 332322 and was posted on October 15, 2026, with a response deadline of December 17, 2026. This project is managed through the state of California for the Department of Corrections and Rehabilitation.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

80 Mil Adhered PVC Roofing Membrane SupplyThis subcontract involves the supply of 16,637 square feet of 80 mil adhered polyvinyl chloride thermoplastic membrane for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The required materials must feature a white exposed face and factory-applied felt backing, provided in rolls of either 6 by 60 feet or 10 by 80 feet. To ensure quality and compliance, the membrane must be FMGI Approved with a current RoofNav report and maintain a Solar Reflectance Index of 78 or higher per ASTM F1980 standards. The solicitation was posted on October 15, 2026, with a response deadline set for December 17, 2026.

Plastics Bag and Pouch Manufacturing

POSTED

DEADLINE

FPCM-COR-I-001054-118-309A-RS Roof Replacement

Solicitation # FPCM-COR-1-001054-118-RS

The California Department of Corrections and Rehabilitation is soliciting bids for a materials-only purchase to support roof replacement phases 1-4 at California State Prison, Corcoran, specifically for Building 309A Central Kitchen Phase I. The scope includes the procurement of a complete roofing system featuring an 80 mil adhered polyvinyl chloride thermoplastic membrane with factory-applied felt backing to cover approximately 16,637 square feet, along with required coping metal, adhesives, and sealants. A critical requirement is a non-prorated, ten-year full system manufacturer's warranty. All proposed assemblies must be FMGI approved with a current RoofNav report and comply with CCR Title 24 and ASTM E108 Class A fire-test exposure standards. The contract is an all-or-none award based on low price, with preferences available for California certified Small Businesses and Disabled Veteran Business Enterprises. Bidders must attend a mandatory walk-thru and submit responses using the state's official bid forms by the specified deadline. Delivery is F.O.B. Destination to the secure perimeter of the Corcoran facility, requiring strict adherence to a three-business-day delivery window upon request and the procurement of necessary gate clearances. The contractor is responsible for maintaining a quality assurance system and retaining inspection records for three years following final payment.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

Electrical Power and Conduit ServicesThis subcontract for Electrical Power and Conduit Services involves performing electrical rough-in and providing dedicated power circuits for prime contractors on California Department of Corrections and Rehabilitation facility projects. The scope of work includes installing conduit raceways, junction boxes, and AC power connections to emergency electrical power circuits specifically for Fire Alarm Control Panels. To ensure safety and compliance, the contractor must apply red Fire Alarm Circuit Control labeling to all disconnects and deliver fully energized power infrastructure. The opportunity is categorized under NAICS code 238210 and was posted on October 14, 2026. Interested parties must submit their responses by the deadline of November 17, 2026. Further details regarding this procurement can be accessed through the Cal eProcure portal.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Fire Alarm System Installation and IntegrationThis subcontract for Fire Alarm System Installation and Integration involves the installation and activation of fully functional fire alarm systems for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes the installation of conduits, wiring, heat sensors, strobes, smoke detectors, and duct-mounted sensors utilizing custom cast metal accessories. The contractor is responsible for ensuring the system is warranted and activated, which includes performing 48-hour continuous system testing and final acceptance testing in strict accordance with NFPA 72 and the 2016 California Building Standards Code. The solicitation was posted on October 14, 2026, with a response deadline of November 17, 2026, falling under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS