Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TANK UNIT, AFT

Active
SPE4A5-26-T-352SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Supplier OEM Division, is for the procurement of 26 Aft Tank Units under NSN 6680-01-129-3692. The contract requires delivery within 347 days after order and specifies performance in San Diego, California. The acquisition is governed by several technical and quality requirements, including specific DLA packaging standards, source approval request documentation, and the removal of government identification from any non-accepted supplies. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Consequently, contractors must possess an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the necessary technical data.

General Info

DoD procurement of 26 Aft Tank Units in San Diego under export controls.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-352S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Renee Wassum
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TANK UNIT, AFT
TANK UNIT, AFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6680-01-129-3692 Quantity: 26 EA Purchase Request: 7014214704QTY: 26 Delivery: 347 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-281F
This contract is a solicitation for the procurement of one magnetic contactor, identified by NSN 6110-01-456-7570 and part number A275KXX91-120. The item is designated as a critical application item and is associated with Nu-Torque Inc and Curtiss-Wright Flow Control Corporation. Delivery is required within 20 days after receipt of order, with the final destination being the USS George Washington CVN 73. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-352Y
This contract is for the procurement of one dial indicating pressure gage, identified by NSN 6685-01-008-7589 and Ashcroft part number EA24-3PEF-EWBO. The order is issued by the Department of Defense under solicitation number SPE4A5-26-T-352Y with a delivery requirement of 85 days after order. The item is designated as a critical application item and must be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to mercury-free requirements, prohibiting the intentional addition of mercury or mercury-containing compounds unless specifically required for functional instruments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing special marking code 05 for delicate instruments. Inspection and acceptance will take place at the destination, and the supplier must follow DLA packaging requirements for procurement as specified in RP001.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M0-26-T-041J
This contract is for the procurement of one magnetic contactor, identified by NSN 6110-01-476-8591 and part number IC5181D102H16AD from Ward Leonard CT LLC. The order is designated as a total small business set-aside under NAICS code 334519 for the Department of Defense, specifically the Maritime Supply Chain ESOC Buys. Delivery is required within five days of order, with the final destination being the USS Texas SSN 775. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Shipping must be conducted via the fastest traceable means, avoiding parcel post, to meet the required delivery date of August 13, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
ACCELEROMETER ASSEM
Solicitation # SPE4A5-26-T-353M
This solicitation, issued by the Department of Defense ASC Supplier OEM Division, is for the procurement of two electrical accelerometer assemblies under NSN 6680-01-514-8526. The contract requires delivery within five days after the order is placed and is governed by specific technical and quality requirements listed in the DLA Master List. Key compliance mandates include adherence to DLA packaging requirements, configuration change management, and the removal of government identification from non-accepted supplies. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is restricted to approved DLA contractors with a valid US/Canada Joint Certification Program certification and completed export-control training. The solicitation is identified by number SPE4A5-26-T-353M, with a response deadline of August 21, 2026, and performance located in Portsmouth, New Hampshire.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CON
Solicitation # SPE4A5-26-T-353H
This contract is a solicitation from the Department of Defense for the procurement of two flow control thermostats, identified by NSN 6685000360972 and Schneider Electric part number 95665-B5. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is March 5, 2027, with a delivery window of 169 days. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. A specific requirement is noted to assemble protective cup part number 19081 on the bellows prior to packaging. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SIGHT, LIQ
Solicitation # SPE4A6-26-T-16RP
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
Federal
Tail Rotor Balance Indicator in support of the Foreign Military Sales (FMS) Bahrain and Czech Republic H-1 Programs
Solicitation # N68335-26-Q-1177
The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, intends to award a competitive Firm Fixed Price contract for the procurement of Tail Rotor Balance Indicators, part number 18D12545-1. This acquisition supports the Foreign Military Sales programs for Bahrain and the Czech Republic H-1 programs. The opportunity is designated as a total Small Business Set Aside under NAICS code 334519. Solicitation N68335-26-Q-1177 will be posted on the SAM website, and interested vendors are advised to monitor the site for the official release and any subsequent amendments. This current notice serves as a pre-solicitation synopsis for administrative purposes and does not constitute a formal request for proposals or a commitment by the government to award a contract.
Navair Warfare Ctr Aircraft Division

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334519
New
Federal
Trimble GPS Survey Equipment Purchase
Solicitation # 12444526Q0068
The Department of Agriculture, specifically the Csa East 6 Usda-Fs, is requesting quotations for the purchase of Trimble GPS survey equipment to support the Ottawa National Forest. This acquisition is being conducted as a combined synopsis and solicitation for commercial items under FAR Part 12, meaning no separate written solicitation will be issued. The project is categorized under NAICS code 334519 and is designated as a total set-aside for small business concerns with a size standard of 600 employees. Interested responsible sources must submit their proposals by the deadline of August 31, 2026. The solicitation, numbered 12444526Q0068, was posted on August 13, 2026. Primary coordination for this requirement is handled by Joshua Franks, and the place of performance is located in Atlanta, Georgia.
Csa East 6 Usda-Fs

POSTED

about 7 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334519
New
DIBBS
Manufacturing of Depth and Pressure Measurement Gauges
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
Supply of Compound Pressure-Vacuum Gages (NSN: 6685013311072)This subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply and delivery of four dial-indicating compound pressure-vacuum gages, identified by NSN 6685013311072. The contractor is responsible for ensuring the gages meet all military specifications, which includes the necessary packaging, labeling, and shipment to the designated location in New Cumberland, Pennsylvania. The procurement falls under NAICS code 334519 and was posted on August 12, 2026, with a response deadline of August 20, 2026. Performance of the contract is centered in New Cumberland, PA, zip code 17070-5002.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Supply of Liquid Level Switch (NSN 6680016921616)
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Thermocouple Manufacturing and Supply
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE4A5-26-T-353T
This solicitation is for the procurement of 23 connecting links for rigs under solicitation number SPE4A5-26-T-353T, with a delivery requirement of 691 days after order. Offerors are encouraged to provide quantity ranges to accommodate demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The contract prohibits the use of covered telecommunications equipment and additive manufacturing unless specifically authorized. Contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Small business joint ventures are required to submit specific representations and certifications. Those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to inform the buyer of their intent.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-352V
This contract is for the procurement of three motional transducers, identified by NSN 6695-01-706-3762 and Lockheed Martin part number 63E920439G2. The order is issued by the Department of Defense under solicitation SPE4A5-26-T-352V, with a required delivery date of July 17, 2026, and a delivery window of 20 days. Shipping is designated as FOB Origin, with delivery to the Naval Surface Warfare Center Philadelphia Division. The agreement includes strict environmental and quality mandates, specifically prohibiting the intentional addition of mercury or mercury-containing compounds except in approved functional applications. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required. Additionally, the contract specifies that the items are critical application items requiring source approval documentation and must be shipped via the fastest traceable means rather than parcel post.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 324191
New
DIBBS
LUBRICATING OIL, ENGINE
Solicitation # SPE4A5-26-T-352T
This contract is for the procurement of 40 units of 15W40 engine lubricating oil, identified as a commercial off the shelf item under NSN 9150-01-542-9479. Each unit consists of a 25 liter pail. The oil must comply with MIL-PRF-2104G and a specific amendment requiring a minimum of 25 percent re-refined oil content, which must be certified to the contracting officer. The product has an extendable shelf life of 36 months and must be delivered to DLA Distribution San Joaquin in Tracy, California, within 164 days. The contractor is required to provide a two gallon sample and lot analysis from the first production batch to the Army Petroleum Center within four days of packaging. Compliance with hazardous material communication standards is mandatory, requiring approved Safety Data Sheets and hazard warning labels. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E, utilizing new and unused containers compatible with the contents. Quality assurance is strictly enforced, and any defective items discovered after shipment may lead to the rejection of the entire contract quantity.
Petroleum Lubricating Oil and Grease Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
COCK, POPPET DRAIN
Solicitation # SPE4A5-26-T-352R
This contract is for the procurement of five poppet drain cocks, identified by NSN 4820014414927 and Parker-Hannifin part number 2774388-101. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, by September 15, 2027. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to several technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this order, and the material has no shelf life requirement.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DOOR, ACCESS, AIRCRAF
Solicitation # SPE4A5-26-T-353D
This contract is for the procurement of two aircraft access doors, identified by NSN 1560-01-652-9408 and Boeing part numbers 114T2401-1 and 114T2401-4. These are classified as critical application items requiring FAA airworthiness approval and a Certificate of Airworthiness and Conformance. The procurement is managed by the Department of Defense ASC Supplier Oper OEM Division, with delivery scheduled for February 14, 2029, to the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and specific FAA bare item marking. Packaging and palletization must comply with MIL-STD-129 and DLA procurement standards. Quality assurance will be conducted via a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Item Unique Identification is not required for this specific order.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MULTIPLE AN
Solicitation # SPE4A5-26-T-353P
This solicitation is for the procurement of six multiple brackets under solicitation number SPE4A5-26-T-353P, issued by the Department of Defense ASC Supplier Oper OEM Division. The delivery requirement is set for 253 days after the order is placed, with the place of performance located in Tracy, California. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must select other equivalent when providing dealer or distributor certifications. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must submit specific representations and certifications. Additionally, contractors are notified of an upcoming mandatory registration via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CAP, FILLER, PUMP HOU
Solicitation # SPE4A5-26-T-353R
This contract is for the procurement of one pump housing filler cap, identified by NSN 1610006287747 and Hamilton Sundstrand part number 513676. The item is designated as a critical application item and must be delivered FOB Origin to the specified location in East Granby, Connecticut, within 20 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for sampling, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Item Unique Identification is not required for this order.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE4A5-26-T-353F
This contract is for the procurement of six mounting brackets, identified by NSN 5340-01-702-6736 and Boeing part number 65B67345-6. Classified as a critical application item, the hardware must adhere to specific technical and quality requirements, including FAA airworthiness approval and a Certificate of Airworthiness and Conformance. The contractor is required to maintain supply chain traceability documentation and follow strict configuration change management and marking protocols. Delivery is set for 246 days after order, with a required delivery date of April 25, 2027, to the DLA Distribution New Cumberland facility. The contract specifies a zero-percent quantity variance and mandates sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and DLA procurement requirements, while item unique identification is not required by the service customer.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A5-26-T-353C
This contract is for the procurement of one sleeve spacer, identified by NSN 5365008498923 and Boeing part number 114E5075-1. The solicitation, numbered SPE4A5-26-T-353C, is issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days after order, with a required delivery date of August 4, 2026. The item is to be delivered FOB Origin to the distribution center at Fort Campbell, Kentucky. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans required unless otherwise specified. Inspection and acceptance will take place at the destination. Shipping must be handled via the fastest traceable means, specifically prohibiting the use of parcel post.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A5-26-T-352N
This contract is for the procurement of 16 fluid filters, identified by NSN 4330-01-131-6293 and Hamilton Sundstrand part number 61-0064-101. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility. The required delivery date is February 13, 2026, with a delivery window of 100 days. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods under MIL-STD-1916 or ASQ H1331. Key restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the contract specifies that item unique identification is not required.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details