Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Tantalum Raw Material Supply

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the supply of high-purity tantalum raw material intended for prime contractors. The selected provider is responsible for sourcing and certifying material that meets specific chemical and physical properties required for high-amp electrical anodes, with a mandatory requirement to provide Mill Test Reports to verify both purity and origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332431 and requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in FPO 96662, with a response deadline set for October 19, 2026.

General Info

DLA small business subcontract for high-purity tantalum raw material supply by October 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332431 - Metal Can Manufacturing

Place of Performance

FPO, AP, 96662, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E6-27-T-0154.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ANODE ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-purity tantalum raw material for prime contractors on DLA supply contracts. Sources and certifies material meeting chemical and physical properties for high-amp electrical anodes. Provides Mill Test Reports to verify origin and purity. Ensures compliance with the Buy American Act and Berry Amendment. Delivers certified tantalum stock.

Similar Contracts

Same NAICS industry code

7075-T6 Minimum Residual Stress (MRS) Aluminum Sheet SupplyThis subcontract, issued by the Department of Defense through the DLA Fleet Readiness Center, requires the supply of 144 units of 7075-T6 Minimum Residual Stress aluminum sheet metal. The material must measure .040 by 48 by 144 inches and strictly adhere to SAE AMS4049 Revision M standards. This procurement is designated as a total small business set-aside under NAICS code 332431. The contractor is responsible for bare item marking according to RQ017 and must follow ASTM D3951 and RP001 packaging guidelines. Compliance with MIL-STD-129 is mandatory, and quality sampling must be performed per MIL-STD-1916 or ASQ H1331. All deliveries must be accompanied by a Certificate of Quality Conformance to ensure the materials meet the specified technical requirements for prime contractors.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Manufacture of Shipping and Storage Drums (NSN 8110-01-190-9372)This subcontract involves the manufacture of 80 specialized shipping and storage drums under NSN 8110-01-190-9372 for the Naval Undersea Warfare Center Division Keyport. The contractor is responsible for fabricating the items according to Basic Drawing NR 10001 3245200 Revision D, with sampling and inspection conducted in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. The project is managed under NAICS code 332431 for the Department of Defense, with the place of performance located in Keyport. Responses are due by October 19, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Aluminum Alloy Plate Supplier (NSN 9535014952547)This small business set-aside subcontract involves the supply of nine aluminum alloy metal plates for prime contractors supporting Department of Defense supply contracts. The plates must adhere to NSN 9535014952547, with specific dimensions of 0.3120 inches in thickness, 48.00 inches in width, and 144.00 inches in length. Delivery is required FOB Origin to the DLA Distribution Depot Oklahoma. The supplier must ensure all materials are preserved and packed according to ASTM B660 and MIL-STD-2073-1E standards, with marking compliant with MIL-STD-129. Strict regulatory and security requirements are in place, including mandatory ITAR/EAR compliance and CMMC Level 2 certification. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

POSTED

DEADLINE

Seamless Copper Alloy Tubing SupplierThis subcontract involves the supply of 100 feet of bright annealed seamless copper-alloy 122 tubing with a 1/8 inch outer diameter for prime contractors working on DLA Weapons Support Fluid Handling Division projects. The materials must strictly comply with Federal Specification MIL-C-3993 and adhere to sampling methods outlined in MIL-STD-1916 or ASQ H1331, while maintaining compliance with DFARS 252.225-7001. Managed under NAICS code 332431 for the Department of Defense, the contract was posted on October 6, 2026, with a response deadline of October 19, 2026. The designated place of performance for this requirement is located in Bismarck.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aluminum Alloy Plate SupplierThis subcontract involves the supply of 21 aluminum alloy metal plates measuring 0.3120 by 48.00 by 144.00 inches, corresponding to NSN 9535-01-495-2547. The materials are intended for prime contractors working on DLA Troop Support procurement projects and must be delivered to Depot Oklahoma at Tinker AFB. All deliverables must be accompanied by a Certificate of Quality Compliance to ensure adherence to technical specifications. The supplier must strictly follow MIL-STD-2073-1E, MIL-STD-129, and ASTM B660 packaging standards. Additionally, the contract mandates rigorous security and regulatory compliance, requiring the provider to maintain CMMC Level 2 certification and adhere to ITAR and EAR export control regulations. The response deadline for this opportunity is October 19, 2026.

POSTED

DEADLINE

Custom Coating and Finishing for HVAC GrillesThis subcontract opportunity involves providing custom painting and finishing services for aluminum diffuser grilles used in U.S. Department of State facility projects. The selected contractor will be responsible for applying architectural finishes and custom colors to cast aluminum grilles using industrial powder coating or architectural paint systems to ensure all products meet specific design specifications. Managed by Acquisitions - Aqm Momentum for the Department of State, this project is designated as a total Small Business Set Aside under NAICS code 332431. The work will be performed in Lorton, Virginia, with a response deadline set for October 13, 2026.

Acquisitions - Aqm Momentum

POSTED

DEADLINE

in about 14 hours

Metal Tube Assembly SupplierThis subcontract involves the manufacture and supply of metal tube assemblies, specifically NSN 4710015746507, for prime contractors supporting Land Supply Chain projects under the Department of Defense. The supplier is responsible for utilizing precision machining and assembly equipment to produce the components and must ensure all deliverables meet strict regulatory standards, including Federal Standard No. 313 and 29 CFR 1910.1200(g). Additionally, the provider must supply all necessary Safety Data Sheets for any hazardous materials involved in the process. The project falls under NAICS code 332431 and will be performed in Hattiesburg, Mississippi. Interested parties must adhere to the timeline established by the posting date of October 5, 2026, with a response deadline set for October 16, 2026. The primary objective of the agreement is the successful delivery of the physical metal tube assemblies to the designated prime contractor.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Aluminum Alloy Sheet Material SupplierThis subcontract involves the supply of 12 aluminum alloy sheets to prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The materials must be 0.063 inches thick, 36 inches wide, and 72 inches long, strictly adhering to Reference Drawing NR 14153 01735. All sheets must be marked using stamping or waterproof fluid stenciling in compliance with MIL-STD-129 and QAP 13873, while also meeting DFARS 252.223-7008 regulations concerning hexavalent chromium. The procurement is managed by the Department of Defense through Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must respond by October 16, 2026, regarding this requirement categorized under NAICS code 332431.

POSTED

DEADLINE

Supplier of Metal Tube Assembly (NSN 4710-01-567-5791)This subcontract involves the procurement of one Metal Tube Assembly for the Department of Defense under the Maritime Supply Chain ESOC Buys project. The selected supplier is responsible for manufacturing or sourcing the assembly to strictly adhere to technical specifications for NSN 4710-01-567-5791. Performance of the contract requires strict compliance with military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The project demands a rapid delivery turnaround of five days. The place of performance is located in Ruston, Louisiana. Interested parties must respond by October 16, 2026, to provide the properly marked and packaged assembly as required by the agency.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Aluminum Alloy Sheet SupplierThis subcontract involves the supply of raw aluminum alloy metal sheets to prime contractors supporting DLA Troop Support procurement projects for the Department of Defense. The required materials consist of sheets measuring 0.125 inches in thickness, 36 inches in width, and 144 inches in length, with each sheet weighing 64.80 pounds. Performance for this contract is centered at Tinker AFB. The supplier is responsible for delivering the specified aluminum alloy sheets along with essential material certifications. Key documentation requirements include the provision of Metal Certification Contract Data Requirements Lists and completed DD Form 1423s to ensure compliance with quality and material standards. The solicitation was posted on October 5, 2026, with a response deadline of October 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Alloy Metallic Tube SupplierThis subcontract through the Department of Defense Fluid Handling Division requires the manufacture or sourcing of 1,047 units of seamless aluminum alloy tubing for prime contractors. The specified tubing must feature plain ends with a 1/4 inch outer diameter and 0.049 inch wall thickness, processed to T6 temper, Type I, in lengths ranging from 10 to 12 feet. All deliverables must strictly adhere to specifications for NSN 4710005414933 and comply with FAR 52.223-3. Performance for this contract will take place at Robins Air Force Base. Interested parties should note the response deadline of October 15, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of RRR300 Niobium SheetsThis subcontract involves the supply of 26 high-purity Niobium sheets for prime contractors working on Fermilab procurement projects under the Department of Energy. The materials must meet the RRR300 Residual Resistivity Ratio purity standard and be provided in two specific dimensions: 265mm x 265mm x 2.8mm and 275mm x 22mm x 3mm. The contractor is responsible for manufacturing or sourcing these sheets and must provide certification of the Export Classification Control Number or an EAR99 designation. The opportunity was posted on October 2, 2026, with a response deadline of October 21, 2026, falling under NAICS code 332431.

Fermilab - DOE Contractor

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Ported Ball Valve Supplier (NSN 4820200133040)This subcontract involves the supply of one ported ball valve for prime contractors under Defense Logistics Agency Land and Maritime contracts. The required component is identified by NSN 4820200133040 and must match Montreal Bronze Limited part number 203-0014. The supplier must ensure full compliance with the DLA Master List of Technical and Quality Requirements, including a strict prohibition on the use of mercury. The valve must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Delivery of the warranted valve is required FOB Origin to the USS Ft Lauderdale LPD 28 Bliss, with the place of performance located in Pascagoula. This procurement falls under NAICS code 332911 and is managed by the Department of Defense.

Industrial Valve Manufacturing

POSTED

DEADLINE

International Freight Forwarding and Delivery (Japan)This subcontract for the Defense Logistics Agency involves the international freight forwarding and delivery of five specialized combustion components to the Commander SRF-JRMC at Yokosuka Naval Base in Japan. The selected provider is responsible for coordinating the entire shipment process from origin to destination, which includes managing all necessary customs clearance for entry into Japan and ensuring the secure transport of materials. To maintain compliance, all shipments must utilize secure transport containers that meet MIL-STD-129 and ASTM D3951 standards. The contractor is required to hold all relevant international shipping certifications and obtain the necessary security clearances for base access. The contract is established as FOB Destination, with performance taking place in FPO 96349.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Atomizer Assemblies (NSN 4530-01-119-9501)This subcontract involves the supply of five specialized Atomizer Assemblies, identified by NSN 4530-01-119-9501, for prime contractors serving the Defense Logistics Agency. The units must strictly adhere to Todd Combustion Inc specifications P/N A-2-36-35 and D-42042. All deliverables are required to comply with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements, with packaging meeting MIL-STD-129 and ASTM D3951 standards. The contract specifies a delivery of five assemblies FOB Destination to Yokosuka Naval Base in Japan. Managed under NAICS code 423830, the procurement process includes a response deadline of October 15, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Packaging and International ShippingThis subcontract involves providing specialized packaging and international logistics services for prime contractors supporting Defense Logistics Agency Troop Support Foreign Military Sales projects. The scope of work focuses on the packaging and marking of hazardous cleaning solvents in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and IP025 standards, specifically requiring the application of shelf-life marking code 32 to ensure transit-ready shipments. The contractor is responsible for coordinating international freight movements to Israel, Egypt, and Slovakia. Due to the nature of the materials and destinations, the provider must maintain valid Hazmat shipping certification and ensure full compliance with ITAR and EAR regulations. This effort falls under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Cleaning Solvent, GE (NSN 7930-01-367-0996)This subcontract through the Defense Logistics Agency involves the procurement of 37,011 units of Cleaning Solvent, GE, identified by NSN 7930-01-367-0996. The selected provider is responsible for manufacturing or sourcing chemicals that strictly adhere to NSN specifications, maintaining full supply chain traceability, and issuing Certificates of Conformance. These supplies are intended for prime contractors working on DLA Troop Support Foreign Military Sales projects, with final delivery destinations in Israel, Egypt, and Slovakia. To qualify for this contract, the provider must meet rigorous security and regulatory standards, including CMMC Level 2 and ITAR/EAR compliance. Additionally, certification under the US/Canada Joint Certification Program is required. The project falls under NAICS code 325998 and is managed by the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Specialized Freight & Oversized HaulingThis subcontract for Specialized Freight and Oversized Hauling supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves the loading, securing, and transportation of six completed oversized portable buildings from the manufacturer to various delivery points across the continental United States. The contractor is required to utilize flatbed trailers and cranes to execute these movements and must maintain all necessary DOT certifications for hauling oversized loads. This effort falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Containment Liners & Sump SystemsThis subcontract involves the manufacture, supply, and installation of secondary containment systems for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the production and fitting of chemical-resistant liners or integrated sump basins, constructed from HDPE or other chemical-resistant polymers, for the base of two-tier hazardous material storage structures. The project specifically entails the delivery of integrated containment basins and liners for six units. All deliverables must strictly adhere to EPA and OSHA standards for secondary containment to ensure safety and regulatory compliance. The contract is categorized under NAICS code 339999 and is managed through the Department of Defense. Interested parties should note the response deadline of October 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Specialized Steel Fabrication & AssemblyThis subcontract for Specialized Steel Fabrication and Assembly involves the production of structural frames and housings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work focuses on the precision cutting, welding, and assembly of industrial steel components to create Two-Tier Portable Hazardous Material Storage Buildings, specifically part number 30B-TT. Deliverables include the completed structural shells, which must feature two-tier shelving and outer protective shells finished with corrosion-resistant paint. All fabrication must strictly adhere to DLA safety specifications regarding hazardous material containment. This opportunity falls under NAICS code 332312 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Valve Piston Manufacturing/Supply (NSN 4820-01-665-4866)This subcontract involves the manufacture or procurement of one Valve Piston, specifically Vacco Industries part number 12052025-1 under NSN 4820-01-665-4866, to support prime contractors for the Defense Logistics Agency Land and Maritime supply contracts. The supplier must adhere to the DLA Master List of Technical and Quality Requirements and ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires strict compliance with the Buy American Act and the Berry Amendment, with the final product delivered FOB Destination to Groton. This opportunity is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-306D

Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LIMITER, ELECTRICAL NOI

Solicitation # SPE4A7-27-Q-0040

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A7-27-Q-0040 for the procurement of six electrical limiters. The items are identified by NSN/Part Number 5895-01-447-6061 and are associated with purchase request 7017409225. This federal solicitation was posted on October 9, 2026, with a response deadline set for October 19, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305Z

Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS