Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

TAPE, ADHESIVE, RUBBE

Awarded
SPE8E9-26-T-3196Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 80 rolls of adhesive rubber tape, with each roll measuring 5 yards in length, 5 inches in width, and 0.1880 inches in thickness, in orange and tan colors. The item is a commercial off-the-shelf product identified by NSN 9320-01-381-7254 and is to be delivered within 47 days of the order being issued, with FOB ORIGIN terms applying. Delivery must be made to DLA Distribution Jacksonville at Bldg 175 Swan Road, Jacksonville, FL 32212-0103, though the official place of performance is San Diego, CA 92136-3581. Packaging, marking, and labeling must strictly comply with DLA Master List requirements, RP001 for packaging, MIL-STD-129 for all shipment markings including barcoding, and ASTM D3951 unless superseded by DLA standards. Hazardous material labeling and Safety Data Sheets must adhere to OSHA’s Hazard Communication Standard and federal regulations, with pre-award submission of hazard labels and SDS required under DFARS clause 252.223-7001. The contract mandates compliance with cybersecurity requirements including safeguarding Controlled Unclassified Information under NIST SP 800-171, reporting cyber incidents within 72 hours, and performing a self-assessment of security controls. Foreign-flag vessel use requires prior written approval at least 45 days in advance, along with detailed shipping documentation and post-shipment certification. Payment must be submitted electronically via Wide Area WorkFlow, and all contractors must maintain accurate small business representations in SAM, with non-compliance subject to penalties. The solicitation, issued under SPE8E9-26-T-3196 on August 3, 2026, with responses due August 6, 2026, is electronic-only through DIBBS and excludes 3D printed components. The contract includes numerous DFARS and FAR clauses covering trafficking in persons, employment eligibility, sustainable products, whistleblower rights, cyber incident reporting, prohibition of hexavalent chromium and covered defense telecommunications, and payment leverage, with deviations applied to several clauses under deviation 2026-00038. The contract does not include option periods or pricing data, and quantity is fixed at 80 rolls

General Info

Procurement of 40 orange and tan adhesive rubber tape rolls, 5 yards each, delivery in 47 days, DLA requirements, San Diego, CA.

Contract Value

$13,599.2

NAICS

325520 - Adhesive Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Award Issued Date

Documents

2

RFQ SPE8E9-26-T-3196 Request for Quotations

PDF, High priority: read this first19 pages · rfq
High

SPE8E9-26-V-2080 - Order for Supplies or Services

PDF, High priority: read this first13 pages · award
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Deadline changed

Response deadline changed from Aug 3, 2026 to Aug 6, 2026.

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
DLA award SPE8E926V2080 posted on DIBBS. Awardee: MIDWEST FIBERGLAS FABRICATORS, (CAGE 6A252) Total Contract Price: $13,599.20 Award Date: 08-10-2026 Solicitation: SPE8E9-26-T-3196 Line items: - TAPE, ADHESIVE, RUBBE (NSN/Part 9320013817254, PR 7017422824)

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0196
Solicitation SPE8ES-27-T-0196 is a request for quotations for the procurement of adhesive, identified by NSN 8040-01-129-2558. The requirement consists of 12 pints, with each unit packaged in a one-pint can. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 20, 2027, and an original required delivery date of April 3, 2027. The contract specifies a non-extendable shelf life of 12 months for Type I (Code H) items. Due to the hazardous nature of the material, the contractor must comply with strict safety and labeling standards. This includes the submission of Safety Data Sheets (SDS) and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for lot or batch numbers and special marking code 32. Palletization must follow DLA packaging requirements RP001. The procurement is governed by various FAR and DFARS clauses, including those related to cybersecurity safeguarding of covered defense information, the Buy American Act, and the prohibition of hexavalent chromium. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation may include a price preference for HUBZone concerns, and the successful offeror must be registered in the System for Award Management (SAM).
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0207
Solicitation SPE8ES-27-T-0207 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one unit of yellow adhesive, identified by NSN 8040-01-663-3917. The requirement specifies a 5.0-ounce size and includes a shelf life requirement of 12 months, which is extendable. Delivery is required within 20 days of award, with a required delivery date of October 29, 2026. The shipment is designated as FOB Destination to Nellis Air Force Base, Nevada, and must be transported via the fastest traceable means, excluding parcel post. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Marking Code 33 for shelf life. Because the item is classified as hazardous material, the supplier must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200, which requires the submission of Safety Data Sheets and specific hazard labels for approval prior to award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contract incorporates cybersecurity reporting standards under DFARS 252.204-7012 and requires offerors to validate their socioeconomic status and telecommunications certifications via the System for Award Management.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A0-27-T-0378
Solicitation SPE4A0-27-T-0378 is a request for quotations issued by the Defense Logistics Agency, Department of Defense, for the procurement of electrical insulation tape, identified by NSN 5970-01-012-4280. The requirement consists of multiple line items, with each unit of issue containing 36 yards of tape. Delivery is required within five days of award, with specific delivery dates set for September 2 and October 1, 2026. Shipments are directed to locations in Peoria, Illinois, and Tyndall Air Force Base, Florida, with FOB, inspection, and acceptance all occurring at the point of origin. The procurement is subject to strict quality and manufacturing standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, and items must adhere to BASIC CID A-A-59474D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a specific prohibition on the use of mercury or mercury compounds. Notably, the government will not evaluate or award contracts to offerors providing items produced via additive manufacturing. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must be registered in the System for Award Management and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Price evaluation preferences are available for certified HUBZone small business concerns, and quotes should be submitted via DIBBS.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS