Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TAPE, INSULATION, ELE

Active
SPE4A6-26-T-05NEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166.007 standards, with a thickness of 0.007 inches, width of 1.0 inch, and length of 36 yards, classified as Type II with a 12-month shelf life that is extendable. The item is subject to strict quality and packaging requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special labeling indicating Type II and shelf life information. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and all attributes not explicitly defined are treated as major. The product must be sourced from qualified manufacturers listed on the QPL QPL-19166-30, and qualification requirements under procurement note H02 apply. The material is non-hazardous per HMIC review, eliminating the need for a Safety Data Sheet submission. Delivery is required within 20 days to the designated military facility in Westfield, Massachusetts, with origin FOB terms and no variance allowed in quantity. The item must be shipped via traceable freight methods, not parcel post, and palletized in accordance with DLA packaging standards. The NSN 5970-01-578-6427 identifies the specific part, with a unit price of $2.00 per each for a total of two units. Inspection and acceptance occur at destination, and all documentation must align with the referenced Technical Data Package revisions and DLA-mastered technical requirements, which are incorporated by reference from the DLA online repository. Contract data confirms this solicitation was issued by the Department of Defense under solicitation number SPE4A6-26-T-05NE, with a response deadline of July 21, 2026, and a required delivery date of July 8, 2026.

General Info

Procure 2 units of Type II insulation tape, MIL-I-19166.007, 0.007" thick, 36 yards, NSN 5970-01-578-6427, FOB, delivered July 8, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

815 SOUTHAMPTON RD BLDG 54, WESTFIELD, MA, 01085-1482, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05NE.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Angela Boyce
contact@example.gov

Full Description

Show more
TAPE,INSULATION,ELE
TAPE, INSULATION, ELECTRICAL
QPL MIL-I-19166.007 THK x 1.0 WD x 36 YD. Shelf Life: Type II, 12mth. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
HMIC code review determined not hazardous
Hazardous Material Indicator Code (HMIC) review for HMIC P (FSC is listed in Table II of FED STD 313). This material has been reviewed and determined that it is not hazardous. A SDS (Safety Data Sheet) package review is not required for procurement. Manufacturer's SDS for this material states GHS Classification<(>,<)> and Labels as Not Applicable.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A6-26-T-05NE
SECTION B
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-I-19166C(1) NOT 2 REVISION NR C DTD 02/26/2021 PART PIECE NUMBER: MIL-I-19166 .007 THK X 1.0 WD
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-19166-30 NOT 1 REVISION NR 30 DTD 01/16/2009 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD QPL-19166-DPG REVISION NR DTD 01/29/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017425217 0001 EA 2.000
NSN/MATERIAL:5970015786427
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
SPE4A6-26-T-05NE
SECTION B
PR: 7017425217 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6201
FB6201 104 FW BARNES ANGB LRS
AF NO MILLSBILLS PROC CP 4135689151
815 SOUTHAMPTON RD BLDG 54
WESTFIELD MA 01085-1482
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6201
FB6201 104 FW BARNES ANGB LRS
CP 413 568 9151
815 SOUTHAMPTON RD BLDG 54
WESTFIELD MA 01085-1482
US
M/F: (TCN) FB620161830959
RDD:
PROJ: TP 3
SUPP ADD: YBZ952 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 10
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/08/2026
SPE4A6-26-T-05NE NSN/Part Number: 5970-01-578-6427 Quantity: 2 EA Purchase Request: 7017425217QTY: 2 Delivery: 20 days ADO

Similar Contracts

NAICS: 335932
New
DIBBS
INSULATION SLEEVINGThis contract is for the procurement of insulation sleeving under solicitation SPE4A6-26-T-02QY, with a requirement for 10 feet of material identified by NSN 5970-01-658-1021. The item is designated as a critical application component and must be supplied by one of three approved vendors: TE Connectivity Corporation, Sumitomo Electric Interconnect, or Dunbar Products LLC, each using the same part number 130-045-5-0. Delivery is required within five days of award, with shipment originating from the supplier’s location and delivery verified at destination. The contract permits a 10 percent quantity variance above the ordered amount but no reduction below the contract quantity. Packaging must comply with MIL-STD-2073-1E, and marking must adhere to MIL-STD-129 without special identifiers, while palletization follows DLA packaging standards. The material must be shipped via the fastest traceable method, excluding parcel post, to the specified military address at Camp Pendleton, California. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with sampling procedures based on MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from rejected items are mandatory. The supplier must also comply with RD002 for covered defense information and RD004 for CMMC self-assessment. All supplies must be physically marked per RQ017, and the unit of issue is feet. Contract performance is tracked with a required delivery date of June 16, 2026, and the contract includes specific freight shipping and parcel post addresses, with procurement governed by federal guidelines and administered by the Department of Defense’s ASC Commodities Division under the NAICS code 335932.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
SWITCH, LEVERThe contract pertains to the procurement of 19 units of a lever switch with NSN 5930-01-389-3080 under solicitation SPE7M8-26-T-5387, issued by the Department of Defense’s Electrical Devices Division. The delivery deadline is set for 102 days after award, and responses must be submitted by July 24, 2026, with the solicitation posted on July 13, 2026. The NAICS code 335932 identifies the industry classification, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. Dawn MacLean is listed as the primary point of contact, reachable via email and phone provided. Compliance with DLA packaging requirements is mandated, and all technical and quality criteria referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on acquisition size. Any alternate offeror must provide a complete data package covering both the approved and alternate part, and no government identification may be removed from non-accepted supplies.
ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELEThe contract pertains to the procurement of electrical insulation tape, identified by NSN 5970016562695 and part numbers 50-29-0125 and QSM-00051, under solicitation SPE4A4-26-T-0172. Eight rolls are to be delivered FOB origin within 187 days, with no quantity variance permitted, and inspected and accepted at destination. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is mandatory, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a critical application item for Northrop Grumman Systems Corp and is subject to stringent quality controls, including ISO 9001:2015 as a non-tailored higher-level requirement. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The contractor must maintain supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and comply with all referenced technical and quality requirements listed in the DLA Master List, including cybersecurity adherence to CMMC Level 2 self-assessment. Physical item marking per RQ017 is required, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment must meet specified standards, and unit of issue is RO. Item Unique Identification is not required as per customer request and DFARS 252.211-7003(c)(1)(i). The acquisition is subject to federal procurement rules, and all documentation and compliance obligations are binding, with the contract managed by the Defense Logistics Agency through Parag Shah as the primary point of contact.
SUPPLIER OPER SUPPLIER SPT DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
Federal
NAWCAD WOLF- Purchase connectors & conduit to repair EMP assemblies
Naval Air Warfare Center Air Division

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving identified by NSN 5970010444531 and part number M23053/1-104-0, governed by the technical standard SAE AS23053/1 Revision A dated 03/01/2018 and referenced standards including SAE AS23053C and QPL-AS23053-QPD. The item is classified as a commercial item and must comply with strict qualification requirements tied to Qualified Products Lists and Qualified Manufacturers Lists, with all technical and quality specifications sourced from the DLA Master List of Technical and Quality Requirements. Inspection and sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The product is designated as a critical application item with a 12-month extendable shelf life under Type 2 Code 4 requirements, and no mercury or mercury-containing compounds may be intentionally added or come in direct contact with the item except for functional uses in portable fluorescent lamps and instruments, which must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must meet MIL-STD-2073-1E with marking per MIL-STD-129, including special marking code 33 for shelf life, and palletization in accordance with DLA packaging standards. The contract calls for 5 feet delivered FOB origin within 20 days, with no variance allowed in quantity, inspection and acceptance occurring at destination. The solicitation number is SPE4A6-26-T-05JD, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of July 20, 2026, and the sole point of contact is Shenika Thompson.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details