This Solicitation opportunity from Department Of Defense was posted on May 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TAPE, INSULATION, ELE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract specifies the procurement of electrical insulation tape under the NSN 5970-01-495-5211 and part number AA59163-1, governed by CID A-A-59163B Revision B dated February 14, 2022, and must comply with MIL-STD-129R(3) for marking and MIL-STD-2073-1E for packaging. The item has a non-extendable 12-month shelf life classified as TYPE II, with preservation requirements mandating dry storage using preservation method 10 and pack code U, with no preservative material applied and wrap material designated as ZZ. Packaging and palletization must adhere to DLA’s RP001 requirements, and all items must be marked per MIL-STD-129, including special marking code 32 for shelf life information. The tape must be delivered in 20 days after award, FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the destination location. Sampling is required to follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances mandatory unless otherwise stated. The item is designated as a critical application item, requiring strict conformance to military specifications and technical requirements referenced from the DLA Master List. The delivery address is Fort Eustis, Virginia, with shipments required to be sent by the fastest traceable means excluding parcel post. The contract is issued under solicitation SPE4A6-26-T-70W6 with a response deadline of June 3, 2026, and is governed by a lowest price technically acceptable (LPTA) basis of award, where only technically compliant offers are eligible for selection. The contract includes mandatory FAR and DFARS clauses covering equal opportunity, combating trafficking, employment eligibility verification, sustainable products, hazardous material identification, shipping by sea, safeguarding contractor information systems, contract changes, inspection of supplies, subcontracting, and payment procedures through WAWF. Offerors must be registered in SAM, hold a valid UEI and CAGE code, and if claiming small business or socioeconomic status, must provide full representations including joint venture partner information. All suppliers must comply with NIST SP 800-
General Info
Agency
NAICS
Place of Performance
BLDG 1610 PATCH RD AWCF SSF, FORT EUSTIS, VA, 23604-5577, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TAPE, INSULATION, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
IAW BASIC CID A-A-59163B
REVISION NR B DTD 02/14/2022
PART PIECE NUMBER: AA59163-1 I 0030
IAW REFERENCE STD NR MIL-STD-129R(3)
SPE4A6-26-T-70W6
SECTION B
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER: TYPE II, 12 MONTHS SHELF LIFE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016870169 0001 RO 5.000
NSN/MATERIAL:5970014955211
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D4 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
U/I CONTAINS 00000000012YD
BULK BREAK POINT:
W26RK4
W6YN USALRCTR JB LANGLEY
BLDG 1610 PATCH RD AWCF SSF
FORT EUSTIS VA 23604-5577
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W26RK4
W6YN USALRCTR JB LANGLEY
BLDG 1610 PATCH RD AWCF SSF
FORT EUSTIS VA 23604-5577
US
MARKFOR
SPE4A6-26-T-70W6
SECTION B
PR: 7016870169 PRLI: 0001 CONT’D
W26RK4
W6YN USALRCTR JB LANGLEY
BLDG 1610 PATCH RD AWCF SSF
FORT EUSTIS VA 23604-5577
US
M/F: (TCN) W26RK461340207
RDD: 777
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/19/2026
SPE4A6-26-T-70W6 NSN/Part Number: 5970-01-495-5211 Quantity: 5 RO Purchase Request: 7016870169QTY: 5 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS