TAPE, INSULATION, ELE

Electrical insulation tape specified under solicitation SPE4A6-26-T-28D7 is a 0.250 inch wide, 0.0010 inch thick product sold in rolls totaling exactly 1500 feet per unit of issue, with a roll inner diameter of 3 inches and outer diameter of 6 inches; packaging may contain multiple rolls provided the cumulative length equals 1500 feet. The material must conform to ASTM D5213-99 for physical identification and bear the part number Type I Class A. All deliveries are subject to zero tolerance for quantity variance and must be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, using preservative method 41 and unit container E5, and labeling must follow MIL-STD-129 with no special marking required. Sampling inspections adhere to MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major and acceptance requires zero non-conformances. The contract includes reference to DLA’s Master List of Technical and Quality Requirements, which governs all technical and quality provisions identified by R or I numbers, and mandates compliance with DLA packaging standards. The unit of issue is RO (roll), with eight units ordered at a total contract value derived from line item 0001, and the NSN 5970-01-393-7365 applies to the material.