This Solicitation opportunity from Department Of Defense was posted on May 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TAPE, INSULATION, ELE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract is for the procurement of electrical insulation tape, specifically identified by NSN 5970-00-432-7371 and part number 275447-1 from TE Connectivity Corporation. The order quantity is two 10-foot rolls, with delivery required within 20 days of contract award. The delivery location is the Naval Undersea Warfare Center in Newport, Rhode Island, with shipment to be made by traceable means and FOB origin. The contract emphasizes adherence to detailed technical and quality requirements as specified in the Defense Logistics Agency (DLA) Master List of Technical and Quality Requirements, and packaging must comply with DLA packaging standards, including MIL-STD-129 marking and ASTM D3951 commercial packaging guidelines for non-hazardous materials. Inspection and acceptance of the goods will be at the destination, and sampling procedures follow MIL-STD-1916 or equivalent standards with strict quality control levels for critical, major, and minor attributes. Unique item identification is not required according to the contract provisions. The contract was issued by the ASC Commodities Division under the Department of Defense, with a solicitation date in May 2026 and a response deadline eight days later. The contract references compliance with applicable quality assurance provisions and federal packaging standards, ensuring that the supplied insulation tape meets all technical, safety, and procurement specifications.
General Info
Agency
NAICS
Place of Performance
1176 HOWELL ST, NEWPORT, RI, 02841-1703, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
INSULATION TAPE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
TECHNICAL GUIDANCE:
UNIT RO EQUALS A 10 FOOT ROLL
TE CONNECTIVITY CORPORATION 00779 P/N 275447-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-49R5
SECTION B
PR: 7016650026 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016650026 0001 RO 2.000
NSN/MATERIAL:5970004327371
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N66604
NUWC DIV NEWPORT
1176 HOWELL ST
NEWPORT RI 02841-1703
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N66604
NUWCDIVNPT
NAVAL STATION NEWPORT
47 CHANDLER ST BLDG 47
NEWPORT RI 02841-1709
US
M/F: (TCN) N6660461183078
RDD: 146
PROJ: TV4 TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 14
DIC: A4A DIST: E9B ADV: 2L FC: DT
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE4A6-26-T-49R5
SECTION B
PR: 7016650026 PRLI: 0001 CONT’D
SPE4A6-26-T-49R5 NSN/Part Number: 5970-00-432-7371 Quantity: 2 RO Purchase Request: 7016650026QTY: 2 Delivery: 20 days ADO