Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TAPE, INSULATION, ELECTR

Active
SPE4A6-26-T-05KDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of electrical insulation tape meeting strict technical and quality standards, with dimensions of 972 inches in length, 1 inch in width, and 0.0100 inches in thickness, colored red and supplied in rolls of 27 yards each. The product must comply with CID A-A-59163B Revision B dated 02/14/2022 and part number AA59163-1-I-0010, and is classified as a critical application item. Shelf life is limited to 12 months with extendable provisions under RS001 for TYPE 2 (CODE 4) items, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 and special code 33 for shelf life identification. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The item is subject to CMMC Level 2 self-assessment and controlled defense information protocols. Quantity is 5 rolls with no variance permitted, delivered FOB destination within 20 days, inspected and accepted at the destination. Unit of issue is RO, NSN is 5970011405672, and the solicitation number is SPE4A6-26-T-05KD, issued by the Defense Logistics Agency under the ASC Commodities Division. Item Unique Identification is not required per customer request, and all quality requirements referenced in the DLA Master List govern performance.

General Info

5 red insulation tape rolls, 972in x 1in x 0.01in, CID A-A-59163B, 12mo shelf life, FOB dest, NSN 5970011405672

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

UNIT 37305, FPO, AP, 96310-7305, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05KD Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Marcita Robinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TAPE,INSULATION,ELECTRICAL
TAPE,INSULATION,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
U/I: ROLL = 27 YARDS.
LENGTH 972.000 IN., WIDTH 1.000 IN.<(>,<)>
THICKNESS 0.0100 IN., COLOR RED SAMPLING:
SHELF LIFE:12 MONTHS
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
SPE4A6-26-T-05KD
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-59163B REVISION NR B DTD 02/14/2022 PART PIECE NUMBER: AA59163-1-I-0010 1 IN. WIDE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017411923 0001 RO 5.000
NSN/MATERIAL:5970011405672
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-01-140-5672 Quantity: 5 RO Purchase Request: 7017411923QTY: 5 Delivery: 20 days ADO

Similar Contracts

NAICS: 335999
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving identified by NSN 5970000631496 and part number M23053/1-105-0, compliant with SAE AS23053/1 Revision A and SAE AS23053C Revision C, and must be manufactured or assembled by an accredited facility listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List accessible via EAUDITNET.COM. The item is classified as a commercial item with a Type 2 shelf life of 12 months, extendable, and marked with Special Marking Code 33. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels for attributes are fixed at VII for critical, IV for major, and II for minor. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129R, with materials supplied on reels or spools properly marked in accordance with both MIL-STD-129 and ISO/IEC 16388, and palletization must meet DLA packaging standards. Delivery is FOB origin with a 20-day lead time, a 10% quantity variance allowed above the ordered one foot, and no tolerance below. Inspection and acceptance occur at origin. The item is critical for application and subject to full technical and quality requirements from the DLA Master List. Shipping must be via traceable freight, not parcel post, to the Naval Air Station Whidbey Island address in Oak Harbor, Washington, with an original required delivery date of July 7, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
Power Supply Set Manufacturing and AssemblyThe contract entails the full manufacturing, assembly, and testing of a Power Supply Set identified by NSN 6130-37-531-2135, in strict compliance with Defense Logistics Agency specifications. This includes conducting first-article testing to verify conformance to design and performance requirements, as well as ensuring all units are properly packaged, labeled, and accompanied by complete documentation necessary for military deployment and inventory management. The work must meet the rigorous quality and traceability standards expected by the Department of Defense, with all production activities aligned to the NSN and related technical directives. Performance of the contract is designated to take place in San Diego, California, with the work being executed under a subcontract arrangement under the NAICS code 335999 for Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, and is managed by the Defense Logistics Agency. While no set-aside classification is specified, the contract is open to eligible subcontractors capable of meeting military-grade manufacturing requirements, and all deliverables must be fully compliant with DLA’s procedural and technical expectations for logistics and supply chain readiness.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CASE, SWITCH BOXThe contract pertains to the procurement of two CASE, SWITCH BOX units with NSN 5975-01-016-8263 under solicitation SPE4A7-26-T-565Q, with a delivery requirement of 110 days after delivery order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendments. The contract includes stringent cybersecurity requirements mandating Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance, either through self-assessment or certification by a certified third-party assessment organization. Packaging must conform to DLA packaging standards, and inspection and acceptance occur at the manufacturer’s origin. All supplies must be physically marked as required, and non-accepted items must have government identification removed. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, who have completed DLA-mandated export control training and questionnaire and received explicit authorization. The place of performance is Fort Campbell, with Ashley Brown of the Department of Defense serving as the primary point of contact. The solicitation closes on July 20, 2026, and the NAICS code 335999 applies to this federal procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION KIT, SLEEVINThe contract is for an Insulation Kit, Sleeving with NSN 5970-01-326-1660 and part number FIT-105-MS-1, supplied by Alpha Wire Corp and Belden Inc, both with CAGE code 92194. Three units are required at a fixed quantity with zero variance, to be delivered within 20 days FOB origin to the specified address in Santa Fe, New Mexico. The item is classified as a Type I shelf-life item with a non-extendable 12-month shelf life, and must be marked accordingly per special marking code 32. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, including cushioning to prevent movement, containment in a single box, and inclusion of a detailed contents list with part numbers and quantities. Marking and barcoding must conform to MIL-STD-129, and palletization follows DLA packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Preservation methods, wrapping materials, and unit packaging are strictly defined. Delivery must be via traceable freight, excluding parcel post, and all documentation must align with DLA technical and quality requirements referenced in the DLA Master List. The contract specifies an original required delivery date of July 7, 2026, with a solicitation response deadline of July 20, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, MARKER, CLEARAThe contract specifies the procurement of one unit of a LIGHT, MARKER, CLEARA with NSN 6220-01-722-5791 and part number 30086R, supplied by TRUCK-LITE CO., LLC, under solicitation SPE4A6-26-T-05LY. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, including a fragile designation, and palletization must follow DLA’s RP001 packaging requirements. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision depending on the acquisition type and amendment history. The item is to be shipped via the fastest traceable means to the Naval Construction Group One in Port Hueneme, CA, excluding parcel post, with a required delivery date of June 29, 2026. Government-specific identifiers and shipping codes are included for logistics and tracking, and the point of contact for the solicitation is Daniel Bailey of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details