Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TAPE, INSULATION, ELECTR

Active
SPE4A6-26-T-18TLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of red electrical insulation tape under solicitation SPE4A6-26-T-18TL for the Department of Defense. The requirement is for two rolls of tape, each measuring 1 inch in width, 0.0100 inches in thickness, and 27 yards in length, conforming to specification A-A-59163B. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 20 days after the order, with FOB origin terms and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-1916 for sampling, MIL-STD-129 for marking, and DLA packaging requirements. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment and covered defense information regulations.

General Info

DoD procurement of two red electrical insulation tape rolls per specification A-A-59163B.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

110 3RD ST BLDG 7004, DYESS AFB, TX, 79607-1510, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-18TL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Marcita Robinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TAPE,INSULATION,ELECTRICAL
TAPE,INSULATION,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
U/I: ROLL = 27 YARDS.
LENGTH 972.000 IN., WIDTH 1.000 IN.<(>,<)>
THICKNESS 0.0100 IN., COLOR RED SAMPLING:
SHELF LIFE:12 MONTHS
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
SPE4A6-26-T-18TL
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-59163B REVISION NR B DTD 02/14/2022 PART PIECE NUMBER: AA59163-1-I-0010 1 IN. WIDE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017841008 0001 RO 2.000
NSN/MATERIAL:5970011405672
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-01-140-5672 Quantity: 2 RO Purchase Request: 7017841008QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-668J
This solicitation from the Department of Defense, issued by the ASC Supplier Oper AE and AF Div, is for the procurement of electrical insulation tape under NSN 5970-00-755-4303. The contract requires a quantity of one roll with a delivery timeline of 20 days after receipt of order. The place of performance is located in Vienna, Ohio. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and physical identification standards. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, MARKER, CLEARA
Solicitation # SPE8E7-26-T-3592
This contract, identified as SPE8E7-26-T-3592, is a solicitation by the Defense Logistics Agency for the procurement of three clear marker lights under NSN 6220-01-695-8338. The requirement specifies parts from Grote Industries Inc (P/N 01-4718-84) or Volvo Group North America LLC (P/N 25109292). Delivery is required within five days of order, with the original required delivery date set for August 14, 2026. The items are to be delivered FOB Origin to Fort Carson, Colorado. The agreement incorporates several technical and quality requirements, including RA001 for general quality standards, RC001 for source approval documentation, and RP001 for packaging. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is hazardous, in which case TQ requirement IP025 applies. Inspection and acceptance will occur at the destination, and the contract mandates the removal of government identification from any non-accepted supplies.
Defense Logistics Agency

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-414C
This solicitation from the Department of Defense Active Devices Division is for the procurement of 77 electrical solenids, identified by NSN 5945-00-225-1987. The contract is a total small business set-aside under NAICS code 335999, with a delivery requirement of 307 days after order. Performance is designated for Hill AFB. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and the prohibition of Class I ozone depleting chemicals. Furthermore, the item contains technical data subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
ACTIVE DEVICES DIVISION

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-18QA
This contract is for the procurement of electrical insulation sleeving, identified as NSN 5970-00-063-1495 and part number M23053/1-103-0. The requirement is for 5 feet of material, with a quantity variance allowed of plus 10 percent and minus 0 percent. The item is classified as a commercial critical application item and must be produced by an accredited manufacturer listed on the Performance Review Institute QML or QPL. It carries a 12-month extendable shelf life and must adhere to SAE AS23053/1 standards. Delivery is required within 20 days ADO, with FOB origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds. Sampling and quality assurance will follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified.
ASC COMMODITIES DIVISION

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATING VARNISH,
Solicitation # SPE7M0-26-T-044Z
This contract is for the procurement of electrical insulating varnish, specifically part number AC-41 from the John C. Dolph Company. The requirement consists of two separate line items, each for a quantity of two gallons, with a delivery timeframe of five days after the order. The items are designated as critical application materials with a non-extendable shelf life of 12 months. Delivery is set as FOB Destination, with shipments directed to the Portsmouth Naval Shipyard in New Hampshire and the Naval Shipyard and IMF Detachment in Guam. Strict compliance is required regarding hazardous materials, including the submission of approved Safety Data Sheets and OSHA hazard labels. The contract prohibits the intentional addition of mercury or mercury-containing compounds in the supplies or packaging. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. All shipments must be sent via the fastest traceable means, specifically excluding parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, MARKER, CLEARA
Solicitation # SPE8E7-26-T-3594
This contract, identified as SPE8E7-26-T-3594, is a solicitation issued by the Defense Logistics Agency for the procurement of seven clear marker lights. The items are identified by NSN 6220-01-723-1116 and part number 33075Y from Truck-Lite Co., LLC. Delivery is required within five days after order, with the shipment destined for Fort Carson, Colorado. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific instructions for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means. The original required delivery date is set for August 14, 2026.
Defense Logistics Agency

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-18QG
This contract is for the procurement of 215 rolls of electrical insulation tape, specifically type MF-2.5 with a width of 3.000 inches and a length of 216 feet per roll. The item is identified by NSN 5970-00-881-3657 and is designated as a critical application item. It must adhere to basic CID A-A-59770A and specifically excludes the use of commercial document A-A-59770. The product has a non-extendable shelf life of 18 months, categorized as a Type I Code K item. Delivery is required within 10 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. This solicitation is a total small business set-aside under NAICS code 335999 for the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BLOC
Solicitation # SPE4A7-26-T-665G
This contract is for the procurement of 12 sectional terminal junction blocks under NSN 5940-01-356-8009. The items are designated as critical application items and must adhere to the technical data package and specifications defined by SAE AS81714/60D. Delivery is required within 171 days, with FOB and inspection/acceptance points set at the origin. The supplier must comply with strict quality and packaging standards, including DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Components must be sourced from Qualified Products Lists or Qualified Manufacturers Lists. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where specifically allowed for functional components. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

40 minutes ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
FLOODLIGHT, ELECTRIC
Solicitation # SPE8E7-26-T-3593
This contract, identified as SPE8E7-26-T-3593, is a solicitation by the Defense Logistics Agency for the procurement of four electric floodlights, specifically part number 1403522 from J. W. Speaker Corporation. The items are identified by NSN 6220017230678 and must be delivered to Fort Carson, Colorado, within five days of the order. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific documentation for source approval and packaging standards. Depending on the hazardous status of the material, packaging must follow either TQ requirement IP025 or ASTM D3951, with all labeling conforming to MIL-STD-129. Shipping must be handled via the fastest traceable means, avoiding parcel post, with a required delivery date of August 14, 2026.
Defense Logistics Agency

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-18RP
ASC COMMODITIES DIVISION

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONNECTOR, PLUG, FIBE
Solicitation # SPE7M0-26-T-043Z
This contract is for the procurement of one fiber optic plug connector, identified by NSN 6060-01-632-1246 and part number M28876/7F13P3. The item must adhere to technical specifications MIL-PRF-28876/7F Revision F and MIL-PRF-28876F(2) Revision F. Delivery is required within five days of order, with the final destination being the Portsmouth Naval Shipyard. The agreement mandates strict compliance with DLA packaging requirements, MIL-STD-129 marking standards, and MIL-DTL-5530 preservation specifications for connectors. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where specifically allowed for functional components. Shipping must be conducted via the fastest traceable means, specifically excluding parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

40 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
Federal
Purchase of space-grade EMI filters and DC/DC converters for the WFCC and SuRSeP Power Boards
Solicitation # 80NSSC26941306Q
NASA/NSSC is seeking to procure space-grade EMI filters and DC/DC converters specifically for the WFCC and SuRSeP Power Boards. The agency intends to award a sole source contract to VPT Inc, located in Blacksburg, Virginia, as they have been identified as the only provider capable of meeting these requirements. The procurement will be managed by the NASA Shared Services Center with performance taking place at the Ames Research Center. This acquisition is classified under NAICS code 335999 and will follow the procedures for commercial items as prescribed in FAR Part 12. While a sole source award is intended, interested organizations may submit their capabilities and qualifications to the primary point of contact, Kacey Hickman, by 3:00 p.m. CST on August 19, 2026, to determine if the procurement will be conducted on a competitive basis.
NASA Shared Services Center

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561990
New
DIBBS
Hazard Warning Labeling & Compliance ServicesThe Hazard Warning Labeling and Compliance Services subcontract is issued by the Department of Defense under the ASC Commodities Division. This contract focuses on the application of hazard warning labels to ensure materials and components are handled safely and in full compliance with DFARS 252.223-7001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561990. It was posted on August 17, 2026, with a response deadline of September 17, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
All Other Support Services

POSTED

40 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Management & DPAS Compliance CoordinationThis subcontract opportunity, titled Supply Chain Management & DPAS Compliance Coordination, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to manage material sourcing and supplier coordination while ensuring strict adherence to Defense Priorities System (DPAS) rating compliance to prioritize fulfillment for national defense requirements. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 541611. Interested parties must submit their responses by September 17, 2026, following the posting date of August 17, 2026.
Administrative Management and General Management Consulting Services

POSTED

40 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
Defense-Grade Packaging & Marking ServicesThe Defense-Grade Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires the professional packaging of bearing units in strict accordance with ASTM D3951 standards. The scope of work includes the application of moisture barrier bags and desiccants to ensure product integrity, as well as comprehensive labeling and Unique Identification marking as mandated by MIL-STD-130. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 339113. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

40 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) & Quality Certification ServicesThis subcontract opportunity, titled First Article Testing (FAT) and Quality Certification Services, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to perform independent testing and documentation of the first production unit to ensure full conformance with technical specifications before proceeding to full-scale production. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026. This is a Total Small Business Set-Aside under FAR 19.5, categorized under NAICS code 541380. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
Testing Laboratories and Services

POSTED

40 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
DIBBS
Precision Bearing Unit ManufacturingThe Precision Bearing Unit Manufacturing subcontract, issued by the Department of Defense ASC Commodities Division, requires the full production of 450 plain bearing units. The scope of work encompasses all materials, machining, finishing, and packaging, with a strict requirement for compliance with Government First Article Test specifications. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332991. The solicitation was posted on August 17, 2026, and the deadline for responses is September 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

40 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-18QM
This contract is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-729-6259, for the Department of Defense under the ASC Commodities Division. The delivery is required within 20 days after receipt of order, with the place of performance located at Camp Pendleton. The solicitation is managed by the Defense Logistics Agency and requires strict adherence to physical identification marking and the removal of government identification from non-accepted supplies. Quality assurance is governed by zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XU
This contract is for the procurement of 54 blind rivets, identified as NSN 5320-01-045-3010 and part number NAS1921B04-06. The items are classified as commercial critical application items and must be manufactured according to the current revision of the applicable part standard. Quality assurance is governed by specific DLA technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and identification marking must comply with MIL-STD-130N. Delivery is required within 171 days, with a need ship date of February 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

40 minutes ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-18SE
This contract is for the procurement of 63 annular ball bearings, identified as a critical application item. The order specifies Honeywell International Inc. and New Hampshire Ball Bearings Inc. as approved sources for part number 74346. Delivery is required within 397 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the origin. The agreement is subject to strict technical and quality requirements, including DLA master list standards, International Traffic in Arms Regulations (ITAR) for export control, and specific distribution statements for technical drawings. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197M. Additionally, the contractor must adhere to restrictions on ozone-depleting substances and ensure all measuring and test equipment meets specified standards.
Ball and Roller Bearing Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFR
Solicitation # SPE4A6-26-T-18QZ
This solicitation is for the procurement of 16 airframe roller bearings under contract number SPE4A6-26-T-18QZ for the Department of Defense. The items must conform to the specified technical drawings and adhere to strict domestic sourcing restrictions. Specifically, the bearings must be manufactured in the United States or Canada, and more than 50 percent of the total cost of the bearing components must originate from these regions. Contractors are required to submit a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. The contract includes several critical compliance requirements, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Delivery is required within 170 days after the order is placed. Failure to provide the necessary sourcing declarations or meet the quality and packaging requirements set by the DLA may result in the disqualification of the quote.
Ball and Roller Bearing Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18TK
This contract is for the procurement of 23 hexagon head cap screws, identified by NSN 5305016946165 and part number M712040381. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-18TK, with a required delivery date of January 10, 2027, and a delivery window of 170 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-18RT
This solicitation, issued by the Department of Defense ASC Commodities Division under contract number SPE4A6-26-T-18RT, is for the procurement of 135 sleeve bushings, identified by NSN 3120-01-166-4435. The required delivery timeframe is 74 days after the order date. Due to the nature of the item, manufacturing may require specific casting or forging and associated tooling, which the government may not provide. The contract is subject to stringent regulatory and quality standards, including CMMC Level 2 certification and adherence to DLA master technical and quality requirements. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additional requirements include physical item marking, specific DLA packaging standards, and inspection and acceptance at the point of origin.
Ball and Roller Bearing Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-18PW
This solicitation is for the procurement of 18 close tolerance screws, identified by NSN 5305-00-229-0264 and part number 3M123-3-9. The contract is issued by the Department of Defense ASC Commodities Division with a delivery requirement of 20 days after receipt of order. Performance is designated for Mountain Home AFB. The procurement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies and strict bare item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, emphasizing zero-based sampling plans for acceptance. Approved sources for this part include SPS Technologies, Huck Intl Inc, Hi-Shear Corp, Fairchild Industries Inc, and Fastener Innovation Technology Inc.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

40 minutes ago

DEADLINE

in 8 days
View Details