Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TAPE, INSULATION, ELECTR

Active
SPE4A6-26-T-10GBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Electrical insulation tape, Type I, 0.500 inches wide and 0.010 inches thick, is procured under contract SPE4A6-26-T-10GB with a unit of issue as rolls and a total quantity of five rolls, each containing 81 feet. The item is classified as a commercial item with a 12-month shelf life, extendable, and meets the technical specifications outlined in CID A-A-59163B Revision B and MIL-STD-129R. It is not classified as a hazardous material per HMIC code review, eliminating the need for a Safety Data Sheet. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are verified at designated levels. Packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129, specifically with special marking code 33 indicating Type II shelf life status. Palletization complies with DLA packaging requirements, and delivery is FOB origin within five days to Tinker AFB, Oklahoma, with no quantity variance allowed. Inspection and acceptance occur at destination. The material is identified by NSN 5970-00-839-0824 and is subject to all technical and quality requirements referenced in the DLA Master List, with the applicable revision controlled by the solicitation issue date.

General Info

Five rolls of Type I electrical tape, 0.500x0.010 inches, 81 ft each, FOB origin, NSN 5970-00-839-0824, 12-month shelf life.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

3301 F AVE DR 22 BLDG 506, TINKER AFB, OK, 73145-9031, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Angela Boyce
contact@example.gov

Full Description

Show more
TAPE,INSULATION,ELECTRICAL
INSULATION TAPE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
12 MONTHS
TYPE I, 0.500 IN. WIDE, 0.010 IN. THK.
81 FEET PER ROLL
HMIC code review determined not hazardous
Hazardous Material Indicator Code (HMIC) review for HMIC P (FSC is listed in Table II of FED STD 313). This material has been reviewed and determined that it is not hazardous. A SDS (Safety Data Sheet) package review is not required for procurement.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC CID A-A-59163B REVISION NR B DTD 02/14/2022 PART PIECE NUMBER: AA59163-1 I 0010 .5 IN. WIDE
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER: TYPE II SHELF LIFE, 12 MONTHS
SPE4A6-26-T-10GB
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017622784 0001 RO 5.000
NSN/MATERIAL:5970008390824
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-00-839-0824 Quantity: 5 RO Purchase Request: 7017622784QTY: 5 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M2-26-T-5788
This contract specifies the procurement of electrical insulation tape, each roll measuring 100 feet, with the unit of issue designated as RO=100FT. A total of 112 rolls are required under purchase request 7017520040, to be delivered within 154 days FOB origin with no tolerance for quantity variance. The material must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, including palletization as outlined in DLA Packaging Requirements. The tape is classified as a critical application item with no shelf life requirement, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for specified functional uses such as in batteries, fluorescent lamps, or instruments, which must then include a secondary containment boundary as mandated by NAVSEA 5100-003D. The item is supplied under NSN 5970-01-018-4304 with approved part numbers from 3M Company and Astilleros Neumáticos Duarry SA, and all documentation and compliance requirements must be met for source approval and shipment. Delivery is to be made to Bremerton, Washington, with inspection and acceptance taking place at the destination.
NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-10EU
This contract pertains to the procurement of a single unit of a lens and light assembly identified by NSN 6220-01-674-7975 and part number CMS442CTP, supplied by VISUAL COMMUNICATIONS COMPANY LLC under solicitation SPE4A6-26-T-10EU. Delivery is required within 20 days to the USS RONALD REAGAN CVN 76 at FPO AP 96616, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the delivery point, with packaging mandated to comply with MIL-STD-2073-1E and marking consistent with MIL-STD-129, including a fragile designation. The item is designated a critical application item, and while unique identification is not required per service customer request, all materials must adhere to DLA packaging standards and avoid intentional addition of mercury or mercury compounds unless exempted for specific functional components like fluorescent lamps or sensors, which must include secondary containment per NAVSEA 5100-003D. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero defects accepted unless otherwise specified, and attributes are classified with verification levels or AQLs as defined. The contract references technical and quality requirements from the DLA Master List, and the supplier must comply with all stipulated documentation, shipment, and transportation protocols outlined in DLA procedural notes. The required delivery date is July 24, 2026, with no need for a ship date specified.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-10FZ
This contract specifies the procurement of electrical insulation sleeving identified by NSN 5970-00-063-1496, with a required quantity of 17 feet to be delivered within five days of contract award. The item is classified as a commercial product of a type and is subject to strict quality control standards including compliance with SAE AS23053/1 Revision A and MIL-STD-129R for marking and packaging. Manufacture and assembly must be performed by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer or Qualified Products List, accessible via eAuditNet.com. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and all attributes are to be verified at specified levels corresponding to stringent AQL criteria. The product has a 12-month extendable shelf life as a Type II, Code 4 item and must be marked accordingly with Special Marking Code 33. Packaging must conform to MIL-STD-2073-1E, with materials supplied on reels or spools labeled in accordance with MIL-STD-129 and ISO/IEC 16388. Delivery is FOB origin with a 10% positive quantity variance allowed, and inspection and acceptance occur at the point of origin. The item is designated as critical application and must be shipped via the fastest traceable method, excluding parcel post, to the Letterkenny Army Depot in Chambersburg, Pennsylvania. All documentation, manufacturing, and delivery processes are governed by DLA master requirements and the contract revision in effect at the award date.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
MARKER STRIP, TERMIN
Solicitation # SPE4A7-26-T-599P
The contract pertains to the procurement of 12 units of a marker strip for terminal boards with NSN 5940-01-531-7249, issued under solicitation SPE4A7-26-T-599P by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and requires delivery within 171 days after order. Compliance is governed by DLA Packaging Requirements for Procurement and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Manufacturer inspection methods may be chosen at their discretion unless contractually directed. The item must conform to technical data specified in A3278582-004 and is to be delivered to New Cumberland, PA, with Lockheed Martin as the CAGE code 80063 performer. All government identification must be removed from non-accepted supplies, and primary point of contact is Lexus Henry, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
Federal
Expeditionary Power & Environmental Resilience SystemsThe contract seeks the supply and integration of ruggedized power systems and environmental controls engineered to operate reliably in extreme temperature ranges from -40°F to 125°F, targeting expeditionary and forward-deployed military environments. These systems will combine solar, hybrid, and battery technologies to ensure continuous, off-grid power availability while integrating thermal management and environmental control capabilities to protect sensitive equipment under harsh conditions. The solution must be durable, transportable, and capable of autonomous operation without reliance on traditional infrastructure. This subcontract is issued under the NAICS code 335999 for other electrical equipment and component manufacturing, and it is managed by the Department of Defense through the FA8684 Aflcmc Rodk office. Performance is expected to occur at Edwards, with responses due by August 28, 2026. The requirement emphasizes resilience, environmental adaptability, and system integration, targeting vendors able to deliver fully tested and field-proven platforms that meet stringent military operational standards for power reliability and thermal stability in austere conditions.
FA8684 Aflcmc Rodk

POSTED

about 17 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335999
New
Federal
GENERATOR;FUNCTION,
Solicitation # SPRMM126QRA75
The contract pertains to the procurement of a GENERATOR;FUNCTION, identified by part number 33521BN, under solicitation SPRMM126QRA75 issued by DLA Mechanicsburg. The requirement is governed by commercial acquisition procedures under FAR Part 12 and will be awarded using the Lowest Price Technically Acceptable (LPTA) evaluation method. The quantity has been increased from 64 to 79 units, with responses due by July 31, 2026, and quotes must remain valid for 60 days. Contractors must adhere to strict technical specifications including MIL-STD-130 Rev N for marking, and any changes to design, material, or part number require prior written approval from the Contracting Officer with code-based justification. The item must be procured exclusively under the specified CAGE and part number, with no substitutions permitted without formal authorization. All deliveries are subject to inspection at source per DLA note E06, and final acceptance occurs at the designated facility. Submission of quotes must be made electronically via PIEE-WAWF, including the Invoice and Receiving Report (Combo), and vendors must declare their status as authorized distributors if not the original equipment manufacturer, providing CAGE codes and OEM details. Compliance with security and export controls is mandatory, with documents labeled using applicable distribution statement codes, including potential NOFORN restrictions. Contractors are required to maintain complete inspection records for 365 days post-delivery and must notify NAVSUP WSS Mechanicsburg to receive automated contract updates via NECO and PIEE EDA. Production facilities cannot be relocated without written permission and a minimum $250 administrative cost reduction. All applicable standards, including MIL-STD-2073 for packaging, must be followed, and access to restricted documents requires formal requests through designated channels. The contract emphasizes full contractor responsibility for quality assurance, with the government retaining the right to verify compliance through independent inspection at any time.
SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335999
New
Federal
LENS, RED
Solicitation # N0010426QBX30
The contract pertains to the procurement of a LENS, RED under solicitation N0010426QBX30, issued by the Navsup Weapon Systems Support Mech under the Department of Defense. The solicitation closes on August 14, 2026, with pricing valid for 60 days after the closing date unless otherwise specified. All contractual documents are deemed issued upon electronic transmission or mail delivery, and government acceptance of a proposal constitutes binding agreement. The scope prioritizes Section C over Section D in case of conflicts, and compliance is governed by a defined order of precedence for technical documentation including IRPOD, drawings, specifications, and STRs, with amendments taking highest priority. Contractors must use document revisions in their entirety unless approved otherwise and may not mix revisions without explicit contracting officer authorization. Critical technical and delivery requirements must be strictly adhered to, and any deviations or waivers require detailed justification, technical data, and prior review by the Government Quality Assurance Representative. Packaging must comply with MIL-PRF-23199 and associated cleanliness controls, excluding fire-retardant materials for this contract, and mercury is strictly prohibited in contact with supplied hardware. Quality assurance obligations flow from the IRPOD, and inspection records must be maintained for government access. Technical data delivery is defined via DD Form 1423 with specific codes for inspection, acceptance, distribution, and submission frequency, requiring a Certificate of Compliance per DI-MISC-81356 with each delivery. The data must be submitted at contract end, and distribution of government-provided documents is governed by standardized distribution statements limiting access to U.S. government entities and authorized contractors. The contract mandates compliance with cybersecurity maturity certification, small business set-aside requirements, priority ratings for national defense, workflow payment instructions, and the mandatory use of Workflow Pro assist modules. All referenced technical documents are accessible via the E-Commerce portal and must be obtained at the specified revision levels.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 16 days
View Details
NAICS: 335999
New
Federal
KU BAND AMPLIFIER
Solicitation # N0010426QQB98
The contract solicits repair services for the KU BAND AMPLIFIER under solicitation number N0010426QQB98, with a required Repair Turnaround Time (RTAT) of 413 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with the manufacturer’s specifications, applicable technical orders, and MIL-STD-130 Rev N marking requirements, and are subject to Government Source Inspection. The contract is firm-fixed-price, with payment processed through Wide Area Workflow, and freight is FOB Origin, handled by the Navy under the CAV Statement of Work. The awardee must provide detailed pricing, including unit and total costs, and must justify pricing if the item has not been previously purchased by NAVSUP WSS or if prices differ from historical norms. The contract includes a mandatory requirement for cybersecurity maturity certification and adherence to Buy American and Small Business Subcontracting Plan provisions. Any failure to meet the RTAT results in a monthly price reduction per unit, with a maximum cap, and may lead to termination for default; excusable delays, such as government-caused holdups, are exempt. The contractor must be an authorized distributor of the original manufacturer and must submit proof of authorization. All repair documentation, inspection records, and test results must be maintained for 365 days after final delivery and are subject to government review. The contract allows for an optional increase in quantity within 365 days of award, executed unilaterally by the Contracting Officer at the original unit price. Items determined beyond repair (BR/BER) are eligible for a negotiated T&E fee not to exceed a specified amount, based on documented costs incurred during evaluation. The contract enforces strict controls on design or part substitutions, requiring prior written approval from the contracting officer under defined code classifications. Compliance with all applicable DoD standards, including security prohibitions, cybersecurity requirements, and distribution statement restrictions, is mandatory. All documents, including technical manuals and specifications, must be obtained through authorized government channels, and requests for controlled or classified materials must be submitted via official channels with proper certification. The offer response deadline is September 10, 2026, and awards will be issued bilaterally, contingent upon the contractor’s signed acceptance.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
Electrical Materials
Solicitation # 80NSSC26938743Q
The solicitation for Electrical Materials is issued under RFQ Notice ID 80NSSC26938743Q by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with a small business set aside totaling the contract. Vendors must submit their bids by August 5, 2026, at 3:00 PM Eastern Time and are required to reference the RFQ notice number in the subject line of their submission. All responses must include the vendor’s CAGE/UEI code, FOB destination terms, lead time for delivery, and the name and email of the point of contact. The place of performance is at Stennis Space Center, Mississippi, and payment will not be made via credit card. The North American Industry Classification System code for this procurement is 335999, and inquiries must be submitted no later than three days after the posting date of July 29, 2026. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Will Garrett as the secondary contact at will.c.garrett@nasa.gov.
NASA Shared Services Center

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
Federal
59--SOLENOID,ELECTRICAL
Solicitation # SPE7M126T237Z
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 17 electrical solenoids identified by NSN 5945012035815, to be delivered to the DLA Distribution Depot in Oklahoma within 95 days of award. The procurement is conducted via a Request for Quote with electronic submission required, and no hard copies of the solicitation are available. Only approved sources—07797 6259, 81983 L-4611, and 99167 713725—are eligible to respond, though all responsible sources may submit a quote if received by the deadline. No specifications, plans, or drawings are provided, and the solicitation is open without any set-aside classification. The NAICS code is 335999, and the contracting office is located in Columbus, Ohio. Quotes must be submitted electronically before the deadline of August 10, 2026, and inquiries should be directed to the buyer via the email provided in the solicitation document, accessible through the SAM.gov link or the DIBBS website using solicitation number SPE7M126T237Z.
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
Federal
70--MCU BS4 MODE2V2.1.3, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYACG
This contract pertains to the repair and modification of the MCU BS4 MODE2V2.1.3 unit, with a firm-fixed-price structure and mandatory compliance with stringent military standards. The contractor must perform teardown and evaluation of received carcasses within 90 days and submit a detailed firm-fixed-price quote encompassing all repair costs including labor, parts, handling damage, missing components, and CAV reporting. The repair must adhere strictly to the original manufacturer’s technical directives and drawings, with the CAGE code 96169 and part number 218080107A-V2 defining the required specification. All repaired units must be marked in accordance with MIL-STD-130 Rev N and packaged per MIL-STD-2073. The Government retains the right to inspect and accept all items, with a required repair turn-around time of 180 days post-receipt. Any design, material, or part number changes require prior written approval, classified under specific code changes ranging from minor part number updates to non-interchangeable redesigns. The contract incorporates multiple mandatory provisions including the Buy American Act, Defense Priorities and Allocations System (DPAS) certification, cybersecurity maturity model requirements, and compliance with Equal Opportunity for Veterans and Workers with Disabilities clauses. The contractor must be an authorized distributor of the original equipment manufacturer, providing signed authorization on official letterhead. Warranty coverage is one year from delivery, and the contract includes an option for an additional 365 days of service under identical terms. All documentation, including technical manuals and engineering drawings, must be obtained through official DoD channels, with proper handling of distribution statements, including NOFORN and Official Use Only designations. Payment will be processed via Wide Area Workflow, and all contractual documents are considered issued upon electronic transmission. The solicitation is issued under Emergency Acquisition Flexibilities, requires bilateral acceptance, and is restricted to qualified small businesses with 750 or fewer employees, with a submission deadline of August 13, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details