Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TAPE, INSULATION, ELECTR

Closed
SPE4A7-26-T-631SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This contract is for the procurement of electrical insulation tape, a critical application item identified by NSN 5970-00-583-9528, with specifications requiring a width of 1.500 inches, thickness of 0.010 inch, opaque color, and a length of 36 yards per roll, with each unit roll equaling 108 feet. The tape must conform to QPL-19166 dated March 20, 2019, and comply with MIL-I-19166C specifications, including proper part number marking. The product has a 12-month shelf life classified as Type 2 (Code 4), extendable, and is subject to strict packaging and marking requirements under MIL-STD-2073-1E and MIL-STD-129R, including a special marking code of 33 for shelf life tracking. Mercury or mercury compounds are prohibited in all materials unless used in exempted functional applications such as batteries or sensors, and portable fluorescent lamps and instruments containing mercury must have shockproof construction and a secondary containment. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract involves a total quantity of 402 rolls across three CLINs, to be delivered FOB origin within 117 days of order to DLA distribution points in Cherry Point, NC; Hill AFB, UT; and Bremerton, WA. Payment must be processed electronically through Wide Area Workflow (WAWF), and invoicing and receiving reports must be submitted per DFARS clauses. The supplier must hold a valid Unique Entity Identifier, submit a Safety Data Sheet prior to award, and comply with cybersecurity safeguards under NIST SP 800-171 and DFARS 252.204-7012. The solicitation is automated and eligible for automated award, with no first article testing required. Domestic content restrictions under the Berry Amendment and Buy American Act apply, with a threshold of $150,000. Offerors must register with DLA’s AMPS system to access the Vendor Sh

General Info

Procure 82 rolls of 1.5in x 0.010in MIL-I-19166C insulation tape, FOB origin, NSN 5970-00-583-9528, shelf life code 33.

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A7-26-T-631S Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
TAPE,INSULATION,ELECTRICAL
INSULATION TAPE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
I
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
12 MONTHS, BASED ON SILICONE ADHESIVE
---
QPL APPLIES:
QPL-19166 FOR 0.010 INCH THICKNESS DATED 20 MAR 2019 APPLIES P/N W:
SPE4A7-26-T-631S
SECTION B
1.500IN L: 36 YDS T: 0.010 QPL-19166
LABEL SHALL MARKED WITH P/N W: 1.500IN T: 0.010 IAW SPEC MIL-I-19166.
---
COLOR SHALL BE OPAQUE, WIDTH 1 1/2 IN<(>,<)>
THICKNESS 0.010 IN
UNIT RO EQUALS 108 FT PER ROLL
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-I-19166C(1) NOT 2 REVISION NR C DTD 02/26/2021 PART PIECE NUMBER: W: 1.500 IN. T: 0.010 IN.
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD MIL-I-19166C REVISION NR C DTD 07/19/1963 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD MIL-I-19166C (AMENDMENT-1) REVISION NR C DTD 08/13/1976 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740516 0001 RO 82.000
NSN/MATERIAL:5970005839528
DELIVERY (IN DAYS):0117
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
SPE4A7-26-T-631S
SECTION B
PR: 7017740516 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-00-583-9528 Quantity: 82 RO Purchase Request: 7017740516QTY: 402 Delivery: 117 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE4A7-26-T-805Q
Solicitation SPE4A7-26-T-805Q is a fixed-price request for quotations issued by DLA Aviation for the procurement of 37 fluid filter heads under NSN 1650007564991. The government specifically requires part number AC1768-61D1 or AC176861D1; part numbers with an S prefix, such as SAC1768-61D1, are excluded unless the regular part number is also clearly marked on both the item and its packaging. Delivery is specified as FOB Origin with a required delivery date of September 30, 2027, and a need ship date of March 17, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including standards for source approval, configuration change management, and measuring equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA master requirements taking precedence. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DIBBS portal, and the award process may be automated. Additionally, the procurement is subject to NAICS 336413 size standards, Buy American Act restrictions, and requires the use of the Wide Area Workflow system for electronic invoicing and payment.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDER
Solicitation # SPE4A7-26-T-724X
Solicitation SPE4A7-26-T-724X is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of four shoulder bolts, identified by NSN 5306-01-454-8637. The requirement is managed by the ASC Supplier Oper AE and AF Division, with Naron Sanderlin serving as the primary point of contact. Delivery is scheduled for March 8, 2027, with a final required delivery date of November 29, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is issued under the First Destination Transportation (FDT) program, and offers must be submitted as FOB Origin. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place against the use of mercury or mercury-containing compounds in preservation and packaging. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information. Offerors must be registered in the System for Award Management (SAM) and submit quotes through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS