Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

TAPE, INSULATION, ELECTRICAL

Awarded

SPE4A627F0367Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Defense Logistics Agency award SPE4A627F0367 is a delivery order issued on October 7, 2026, to G3 Tapes, Inc. for the procurement of electrical insulation tape, identified by NSN 5970004801329. This specific order, valued at 10.53 dollars for one roll, requires delivery to MALS 13 Rear Supply in Yuma, Arizona, by October 19, 2026. This delivery order is executed under the broader Indefinite Delivery Purchase Order SPE4A626D5859, which was established on September 21, 2026. The overarching IDPO has a total maximum value of 350,000 dollars over a five-year base period and guarantees a minimum quantity of 5,000 rolls. The master agreement mandates strict compliance with Time Definite Delivery standards and specifies a required shelf life of 18 months for the supplied materials.

General Info

DLA awarded G3 Tapes $10.53 for electrical insulation tape delivered to Yuma, Arizona.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$10.53

NAICS

326299 - All Other Rubber Product Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

Award Issued Date

10/07/2026, 12:00:00 AM UTC

Documents

2

SPE46-26-D-5859 - Indefinite Delivery Purchase Order (IDPO)

award

High

Delivery Order SPEA46-27-F-0367 (G3 Tapes, Inc.)

task-order-award

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedOct 7

Award Notice

AwardedOct 7

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE4A627F0367 posted on DIBBS. Awardee: G3 TAPES, INC. (CAGE 55GW5) Total Contract Price: $10.53 Award Date: 10-07-2026 Delivery order under: SPE4A626D5859 Line items: - TAPE, INSULATION, ELECTRICAL (NSN/Part 5970004801329, PR 7018660526)

Similar Contracts

Same NAICS industry code

Port Tampa Bay Metro Port Development Berth 266 Bulkhead Tampa, Florida

Solicitation # port-tampa-bay-metro-port-development-berth-266-bulkhead-tampa-florida

Manson Construction Co. is soliciting sub-bids and supplier quotes for the Port Tampa Bay Metro Port Development project at Berth 266 in Tampa, Florida. The scope of work involves the development of the CT-5 Cruise Terminal, specifically the construction of an anchored bulkhead system along the perimeter of newly reclaimed land, aligned with the existing concrete bulkhead face at Berth 268. Key deliverables include approximately 1,100 linear feet of combination pipe-and-Z-sheet-pile anchored bulkhead, a reinforced concrete cap, an anchor wall system, tie rods, and associated structural hardware. The project also requires the installation of mooring bollards along the bulkhead face, independent high-wind mooring dolphins, and a foam-filled fender system, with additional requirements for ESA and MMPA monitoring and materials testing. This solicitation is designated for Certified Small Business Enterprises, with a specific 9 percent SBE requirement. All interested subcontractors and suppliers must provide performance and payment bonds, and insurance is required for participation. Sub-bids and quotes are due by October 16, 2026, at 5:00 P.M. The project falls under NAICS code 326299 and is managed by Manson Construction Co. as the primary agency.

Manson Construction Co.

POSTED

about 3 hours ago

DEADLINE

Offset Blankets

Solicitation # 2031ZA26N00069

The Bureau of Engraving and Printing Office of Product Development intends to award a noncompetitive, Firm-Fixed-Price Indefinite Delivery / Indefinite Quantity (IDIQ) contract to I.T.G.-GmbH Graphic Products for the supply of offset and collector blankets. These specialized blankets are used for waterless offset printing on sheet-fed Simultan offset presses and as collector cylinder blankets on Super Orlof Intaglio presses for the production of U.S. currency at the DC and Western Currency Facilities. The contract is structured with five 12-month ordering periods and is being pursued under FAR 13.106-1(b) because only one source is reasonably available to meet the government's needs. Technical requirements are governed by BEP Specification B: OPP-2, Revision 2, which mandates that blankets be non-tacky, resistant to mineral oil-based inks, and possess a minimum service life of 200,000 impressions. Compliance is measured through rigorous standards, including ISO 12636-2018 for impression depth and ISO 13934-1 for elongation and tensile strength. Deliveries are to be made to facilities in Landover, Maryland, and Fort Worth, Texas, with strict packaging requirements involving wooden boxes and pallets that conform to Department of Transportation and OSHA Hazard Communication standards. The contractor must provide electronic inspection results, control charts for thickness, length, and width, and written certifications of compliance for each delivery. Due to the nature of the work, the contractor is required to sign a non-disclosure agreement regarding the manufacture of U.S. currency and must adhere to FAR Subpart 9.5 regarding Organizational Conflicts of Interest.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Marine Fender Fabrication and SupplyThis subcontract involves the fabrication and supply of one Marine Fender, identified by NSN 2040-01-654-7581 and Part Number 12589966, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider is responsible for the complete manufacturing process, ensuring that all materials are free of Class I ozone-depleting chemicals and adhere to Type I Code Q shelf-life requirements. The scope of work includes strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026, under NAICS code 326299.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

STARBOARD, WISKER FO

Solicitation # SPE8E6-26-T-4660

Solicitation SPE8E6-26-T-4660, issued by DLA Troop Support Construction and Equipment, seeks quotes for 618 units of Starboard, Wisker FO, identified by NSN 4220-01-561-1017. The requirement specifies critical application items with compatible part numbers from Kirby Morgan Dive Systems Inc (P/N 510-786) or James Fisher Australia T/A JFD (P/N DE34825). The items are subject to a non-extendable shelf life of 120 months. Delivery is required by May 3, 2027, with a need ship date of March 15, 2027, and is established as FOB Origin. The contract mandates destination inspection and acceptance, with shipping directed to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. The solicitation incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting potential safety issues. All quotes must be submitted via the DIBBS portal.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Gasket Material (NSN 9320-01-706-0007)This subcontract involves the supply of 40 sheets of specialized gasket material, identified by NSN 9320-01-706-0007, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The material must strictly adhere to IRPOD requirements and be delivered with a Certificate of Compliance and a cure date certificate. The contractor is required to maintain a government-acceptable inspection system and ensure all materials are packaged and marked according to MIL-STD-2073, MIL-STD-130, and MIL-STD-129 standards. This opportunity falls under NAICS code 326299, with a response deadline set for November 12, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of 20 finished nonmetallic hose assemblies for the DLA Weapons Support Fluid Handling Division. The assemblies must be compatible with specific part numbers from Oshkosh Defense LLC and Grove U.S. LLC, adhering to NSN 4720014134028. Performance of the contract takes place in New Cumberland, Pennsylvania, under NAICS code 326299. Strict adherence to RA001 quality requirements is mandatory, and the contractor must ensure full compliance with the Buy American Act and the Berry Amendment. Additionally, the use of additive manufacturing is explicitly prohibited for the production of these components. The response deadline for this opportunity is October 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Rubber Gaskets (NSN 5330016802351)This subcontract involves the manufacture or procurement of six specialized rubber gaskets for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The required components must match NSN 5330016802351 and Part Number 10137048107. All items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor is required to adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates full compliance with the Berry Amendment and Buy American regulations. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 326299.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Sediment Strainers (NSN 4730-01-540-3594)This subcontract involves the manufacture or procurement of four specialized sediment strainers, part number 75116-100 (NSN 4730-01-540-3594), for prime contractors supporting the DLA Weapons Support Fluid Handling Division. All units must be produced according to HDT Expeditionary Systems specifications and packaged in compliance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The agreement specifies delivery of the units FOB Origin, with performance taking place in New Cumberland. The project falls under NAICS code 326299 and is managed by the Department of Defense. Interested parties had until October 19, 2026, to respond to the solicitation.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material Supply for Tie Rod FabricationThis subcontract involves the supply of aerospace-grade raw material intended for tie rod fabrication to support prime contractors on DLA Weapons Support ASC projects. The provider must source alloys that strictly adhere to the chemical and physical properties specified in TDP Rev B Gen 2 and Drawing NR 77445. To meet Critical Safety Item requirements, the contractor is responsible for delivering certified raw material stock accompanied by full material traceability and Mill Test Reports. This procurement is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

O-Ring Manufacturing and SupplyThis subcontract involves the manufacture and supply of 118 O-rings for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The items must be produced according to NSN 5331-01-395-7686 specifications and must be entirely free of asbestos in compliance with FED-STD-313. The contractor is responsible for packaging the units in medium duty, waterproof, greaseproof, and opaque bags following MIL-DTL-117, Type II, Class C, Style 1 standards, with marking performed per MIL-STD-129. Performance for this contract is based in New Cumberland, Pennsylvania, under NAICS code 326299.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

RUBBER SHEET, SOLID

Solicitation # SPE8E5-26-T-4435

Solicitation SPE8E5-26-T-4435 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of five units of solid rubber sheets under NSN 9320014561157. The contract requires delivery within 20 days after order to a facility in Egg Harbor Township, New Jersey, with an original required delivery date of September 18, 2026. Inspection and acceptance will occur at the point of origin. The procurement is managed under the First Destination Transportation program and falls under NAICS code 326299. Critical technical requirements include the mandatory application of Pressure Sensitive Adhesive (PSA), which must be verified before the material leaves the manufacturing facility. The items are subject to a non-extendable 12-month shelf life (Type I, Code H) and must be marked with Special Marking Code 32. Packaging must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-147, with a specific directive to avoid plastics for wrapping or cushioning where possible. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and hazardous material identification. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

in about 8 hours

RUBBER SHEET, SOLID

Solicitation # SPE8E5-26-T-4318

Solicitation SPE8E5-26-T-4318 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one unit of solid rubber sheeting, identified by NSN 9320014561157. The requirement is governed by NAICS code 326299 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Key technical requirements include a non-extendable 12-month shelf life and a mandatory verification that Pressure Sensitive Adhesive is applied prior to the material leaving the manufacturing facility. The contract specifies FOB Origin for delivery, with both inspection and acceptance occurring at the origin. Delivery is required within five days of award, with an original required delivery date of September 8, 2026, shipping to a facility in Sioux Falls, South Dakota. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-147, with specific emphasis on avoiding plastics for wrapping and cushioning. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. Quotations are due by September 21, 2026.

Defense Logistics Agency

POSTED

DEADLINE

in about 8 hours

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Ported Ball Valve Supplier (NSN 4820200133040)This subcontract involves the supply of one ported ball valve for prime contractors under Defense Logistics Agency Land and Maritime contracts. The required component is identified by NSN 4820200133040 and must match Montreal Bronze Limited part number 203-0014. The supplier must ensure full compliance with the DLA Master List of Technical and Quality Requirements, including a strict prohibition on the use of mercury. The valve must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Delivery of the warranted valve is required FOB Origin to the USS Ft Lauderdale LPD 28 Bliss, with the place of performance located in Pascagoula. This procurement falls under NAICS code 332911 and is managed by the Department of Defense.

Industrial Valve Manufacturing

POSTED

DEADLINE

International Freight Forwarding and Delivery (Japan)This subcontract for the Defense Logistics Agency involves the international freight forwarding and delivery of five specialized combustion components to the Commander SRF-JRMC at Yokosuka Naval Base in Japan. The selected provider is responsible for coordinating the entire shipment process from origin to destination, which includes managing all necessary customs clearance for entry into Japan and ensuring the secure transport of materials. To maintain compliance, all shipments must utilize secure transport containers that meet MIL-STD-129 and ASTM D3951 standards. The contractor is required to hold all relevant international shipping certifications and obtain the necessary security clearances for base access. The contract is established as FOB Destination, with performance taking place in FPO 96349.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Atomizer Assemblies (NSN 4530-01-119-9501)This subcontract involves the supply of five specialized Atomizer Assemblies, identified by NSN 4530-01-119-9501, for prime contractors serving the Defense Logistics Agency. The units must strictly adhere to Todd Combustion Inc specifications P/N A-2-36-35 and D-42042. All deliverables are required to comply with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements, with packaging meeting MIL-STD-129 and ASTM D3951 standards. The contract specifies a delivery of five assemblies FOB Destination to Yokosuka Naval Base in Japan. Managed under NAICS code 423830, the procurement process includes a response deadline of October 15, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Packaging and International ShippingThis subcontract involves providing specialized packaging and international logistics services for prime contractors supporting Defense Logistics Agency Troop Support Foreign Military Sales projects. The scope of work focuses on the packaging and marking of hazardous cleaning solvents in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and IP025 standards, specifically requiring the application of shelf-life marking code 32 to ensure transit-ready shipments. The contractor is responsible for coordinating international freight movements to Israel, Egypt, and Slovakia. Due to the nature of the materials and destinations, the provider must maintain valid Hazmat shipping certification and ensure full compliance with ITAR and EAR regulations. This effort falls under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Cleaning Solvent, GE (NSN 7930-01-367-0996)This subcontract through the Defense Logistics Agency involves the procurement of 37,011 units of Cleaning Solvent, GE, identified by NSN 7930-01-367-0996. The selected provider is responsible for manufacturing or sourcing chemicals that strictly adhere to NSN specifications, maintaining full supply chain traceability, and issuing Certificates of Conformance. These supplies are intended for prime contractors working on DLA Troop Support Foreign Military Sales projects, with final delivery destinations in Israel, Egypt, and Slovakia. To qualify for this contract, the provider must meet rigorous security and regulatory standards, including CMMC Level 2 and ITAR/EAR compliance. Additionally, certification under the US/Canada Joint Certification Program is required. The project falls under NAICS code 325998 and is managed by the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Specialized Freight & Oversized HaulingThis subcontract for Specialized Freight and Oversized Hauling supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves the loading, securing, and transportation of six completed oversized portable buildings from the manufacturer to various delivery points across the continental United States. The contractor is required to utilize flatbed trailers and cranes to execute these movements and must maintain all necessary DOT certifications for hauling oversized loads. This effort falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Containment Liners & Sump SystemsThis subcontract involves the manufacture, supply, and installation of secondary containment systems for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the production and fitting of chemical-resistant liners or integrated sump basins, constructed from HDPE or other chemical-resistant polymers, for the base of two-tier hazardous material storage structures. The project specifically entails the delivery of integrated containment basins and liners for six units. All deliverables must strictly adhere to EPA and OSHA standards for secondary containment to ensure safety and regulatory compliance. The contract is categorized under NAICS code 339999 and is managed through the Department of Defense. Interested parties should note the response deadline of October 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Specialized Steel Fabrication & AssemblyThis subcontract for Specialized Steel Fabrication and Assembly involves the production of structural frames and housings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work focuses on the precision cutting, welding, and assembly of industrial steel components to create Two-Tier Portable Hazardous Material Storage Buildings, specifically part number 30B-TT. Deliverables include the completed structural shells, which must feature two-tier shelving and outer protective shells finished with corrosion-resistant paint. All fabrication must strictly adhere to DLA safety specifications regarding hazardous material containment. This opportunity falls under NAICS code 332312 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Valve Piston Manufacturing/Supply (NSN 4820-01-665-4866)This subcontract involves the manufacture or procurement of one Valve Piston, specifically Vacco Industries part number 12052025-1 under NSN 4820-01-665-4866, to support prime contractors for the Defense Logistics Agency Land and Maritime supply contracts. The supplier must adhere to the DLA Master List of Technical and Quality Requirements and ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires strict compliance with the Buy American Act and the Berry Amendment, with the final product delivered FOB Destination to Groton. This opportunity is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-306D

Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LIMITER, ELECTRICAL NOI

Solicitation # SPE4A7-27-Q-0040

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A7-27-Q-0040 for the procurement of six electrical limiters. The items are identified by NSN/Part Number 5895-01-447-6061 and are associated with purchase request 7017409225. This federal solicitation was posted on October 9, 2026, with a response deadline set for October 19, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305Z

Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS