Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TAPE, PRESSURE SENSITIV

Active
SPE8EN-26-Q-0068Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 3 rolls of pressure-sensitive adhesive tape, designated by NSN 7510-01-670-8286 and part number SCOTCH850, manufactured by 3M Company. The tape is 1 inch wide and 72 yards long, classified as a Commercial Off the Shelf (COTS) item with a non-extendable shelf life of 18 months, meeting Type I (Code K) requirements. All packaging, preservation, and marking must comply with MIL-STD-2073-1E and MIL-STD-129R, including specific shelf-life labeling and special marking code 32. The product is designated as a critical application item, requiring strict adherence to configuration change management, supply chain traceability documentation retention as per DLAD Procurement Note C03, and FAA bare item marking requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The contract is firm fixed price with no variance allowed in quantity, and delivery is due 30 days after award, with FOB origin and acceptance occurring at destination. The item must be palletized per DLA packaging requirements and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Compliance with technical and quality requirements referenced from the DLA Master List is mandatory, and all documentation must align with the referenced Quality Assurance Provision 13873 and CDRL FAACERTCOM-25015. The solicitation number is SPE8EN-26-Q-0068, with a response deadline in August 2026, and the required delivery date is June 5, 2026. Transportation and freight handling must follow DLAD Procurement Notes C19 and C20, and the unit of issue is roll (RL), as defined by DoD standards.

General Info

3M SCOTCH850 tape, 1x72yd, COTS, 18-month shelf life, strict MIL-STD compliance, FOB origin, delivery to New Cumberland by June 5, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8EN-26-Q-0068 for Pressure Sensitive Tape

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
View Agency Profile
Office AddressUS
Contacts
Jennifer Esworthy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TAPE, PRESSURE SENSI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RQ046: FAA Bare Item Marking Requirements THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
- RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
MATERIAL WIDTH 1.00 INCH MATERIAL LENGTH 72.0 YARDS
RS013: Shelf-life requirement RS001 for a TYPE I (CODE K) item with a shelf life of 18 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
SPE8EN-26-Q-0068
SECTION B
SUPPLY/SERVICE: 7510-01-670-8286 CONT'D
3M COMPANY 76381 P/N 850 1 IN. RED
3M COMPANY 76381 P/N SC0TCH850 FRED-25-4MMX66ME
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 7510-01-670-8286 3.000 RL $ _______________ $ _______________
TAPE,PRESSURE
SENSITIVE ADHESIVE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Ensure proper Shelf-Life labeling is applied to material packaging I/A/W MIL-STD-129R
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE8EN-26-Q-0068
SECTION B
SUPPLY/SERVICE: 7510-01-670-8286 CONT'D
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016566200 0001 N/A N/A N/A 06/05/2026

SPE8EN-26-Q-0068 NSN/Part Number: 7510-01-670-8286 Quantity: 3 RL Purchase Request: 7016566200QTY: 3 Delivery: 30 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
SLED
Pavement Marking Materials SupplyThe City of Stillwater is seeking to procure high-performance pavement marking materials for use on airport taxiways, requiring offerings such as thermoplastic, paint, or polymer tapes that meet or exceed established technical specifications for durability, reflectivity, and weather resistance. The contract is structured as a subcontract and is open to qualified suppliers capable of delivering materials that ensure long-term visibility and safety under the demanding conditions of aircraft movement. All submitted proposals must align strictly with the technical requirements to ensure compatibility and compliance with aviation infrastructure standards. The solicitation was posted on August 8, 2026, with responses due by September 2, 2026, at 9:00 PM. The North American Industry Classification System code 325520 indicates this procurement falls under the category of paint and coating manufacturing. The place of performance and point of contact details are not specified, but all deliveries and services must be directed to the airport taxiway areas under the jurisdiction of the City of Stillwater in Oklahoma. Interested parties can access further details through the provided online portal for submission and inquiry.
City Of Stillwater

POSTED

about 22 hours ago

DEADLINE

in 24 days
View Details
NAICS: 325520
New
DIBBS
HARDENER, ADHESIVE
Solicitation # SPE8ES-26-Q-0091
This procurement under solicitation SPE8ES-26-Q-0091 seeks one gallon of HARDENER, ADHESIVE with NSN 8040-01-596-9091 under a firm fixed price contract with zero variance allowed in quantity. Delivery is required within 60 days after award to the Trident Refit Facility in Kings Bay, Georgia, with inspection and acceptance occurring at destination. The item is classified as a critical application item with a Type 2 shelf life of 12 months, extendable, and must be packaged in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, including special marking code 33 for shelf-life tracking. All packaging, marking, and shipping of this hazardous material must comply with IP025 and the revised Hazard Communication Standard, requiring submission of OSHA-compliant Safety Data Sheets and labeled containers prior to award, along with employee training on updated hazard communication protocols. The solicitation incorporates technical and quality requirements from the DLA Master List and mandates adherence to MIL-STD-129R for marking and MIL-STD-147F for technical data package compliance. This contract involves Covered Defense Information and potentially triggers requirements under DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020 for safeguarding controlled unclassified information, with noncompliance risking automatic purchase order cancellation. The acquisition follows streamlined procedures under 41 U.S.C. 1901 and Class Deviation 2026-O0028, utilizing simplified processes for defense acquisitions. Shipments must avoid parcel post and be sent via the fastest traceable means to the government delivery point identified by RDD 999/NMCS and associated military tracking codes.
OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
Federal
Corrosion-Resistant Coating and Material SupplyThe contract seeks the supply of corrosion-resistant coatings or finishes for scaffolding components intended for use in outdoor, humid environments, with acceptable methods including galvanization, powder coating, or specialized protective paints. The requirement is tied to infrastructure projects under the U.S. Embassy in Mexico City, ensuring durability and long-term performance of scaffolding used in maintenance, construction, or repair activities exposed to moisture and environmental degradation. The solicitation is classified as a subcontract under NAICS code 325520, which pertains to paint and coating manufacturing, indicating the vendor must possess technical expertise in protective surface treatments suitable for heavy-duty, high-humidity applications. Responses must be submitted no later than August 24, 2026, at 6:00 p.m. local time, with the opportunity publicly posted on August 7, 2026. Performance of the work is specifically required in Mexico City, and while no set-aside provisions are designated, the contracting authority is the U.S. Department of State through its embassy office. Vendors must ensure material compliance with environmental and corrosion resistance standards appropriate for the region’s climate conditions, and delivery timelines, quality controls, and certification of coating applications will be critical to fulfilling contractual obligations without delays or rework.
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply for Naval Vessel MaintenanceThe contract obligates the supplier to deliver 5,000 gallons of military-spec adhesive designated by NSN 8040008433461 to support maintenance operations aboard the USS THEODORE ROOSEVELT. Delivery must be completed FOB Destination no later than August 19, 2026, ensuring the material arrives at the designated naval location in proper condition and ready for immediate use. The adhesive is classified under NAICS code 325520, indicating its classification within the chemical manufacturing sector, and the requirement is issued under a subcontract arrangement by the Defense Logistics Agency, operating under the Department of Defense. The procurement is part of routine fleet maintenance, and the timing of the delivery is critical to align with scheduled vessel maintenance windows. The contract does not specify a set-aside for small businesses or other categories, and performance is tied directly to the naval vessel’s operational readiness.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply – RTV Silicone (NSN 8040001449774)The contract entails the supply and delivery of six cases of RTV silicone adhesive conforming to the military National Stock Number 8040001449774, ensuring full compliance with Department of Defense specifications. The product must meet DPAS rated requirements, confirming its priority status for national defense-related procurement. Shipping is arranged on an FOB destination basis directly to Ellsworth Air Force Base in South Dakota, placing responsibility for delivery and transit risks on the supplier until arrival at the designated military facility. The contract was awarded under the NAICS code 325520, classifying it within the industrial chemical manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. It is structured as a subcontract with no set-aside designation, and while the solicitation number is not provided, the award reference links to DLA’s procurement system for official documentation and tracking.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Lacquer Supply and DeliveryThe contract entails the supply and delivery of 2,000 quarts of lacquer to Incirlik Air Base in Turkey, with the terms set as FOB Destination, meaning the contractor assumes full responsibility for transportation, handling, and all associated logistics until the goods reach the designated location. The contractor must ensure compliance with all U.S. government inspection requirements and handle any necessary documentation or procedural steps to meet military standards upon arrival. The product falls under NAICS code 325520, indicating it is classified within the paint and coating manufacturing industry, and the agreement is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense. The contract was posted on August 5, 2026, and the award details are accessible through the DIBBS system.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply and DeliveryThe contract mandates the procurement and delivery of two cases of military-grade adhesive identified by NSN 8040011680077, with strict adherence to specified manufacturer part numbers to ensure compliance with defense standards. Delivery is required to Fort Carson, Colorado, under FOB destination terms, meaning the vendor assumes all responsibility and risk until the goods are received at the designated location. The shipment must include traceable logistics to guarantee transparency and accountability throughout transit. The contract is classified as a subcontract under NAICS code 325520, indicating involvement in chemical and related product manufacturing, and is administered by the Defense Logistics Agency under the Department of Defense. While the posting date is listed as August 5, 2026, no solicitation number or specific delivery timeline is provided, and the point of contact details remain unspecified.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Material Supply (NSN/Part 8040015814712)The contract involves the supply of one unit of defense-grade adhesive material identified by NSN/Part 8040015814712, subject to strict federal specifications and full traceability requirements. Delivery is arranged under FOB destination terms, meaning the seller assumes all costs and risks until the material reaches the designated delivery point. The contract is classified as a subcontract under NAICS code 325520, which corresponds to the manufacturing of other chemical products, and is managed by the Defense Logistics Agency under the Department of Defense. The posting date indicates the agreement was formalized in August 2026, with performance obligations tied to compliance with military-grade standards for quality, durability, and security. All materials must meet stringent documentation and accountability protocols to ensure operational readiness and regulatory adherence.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Supply of Sealing Compound (NSN/Part 8030001817529)The contract mandates the supply and delivery of one bottle of military-grade sealing compound identified by NSN 8030001817529 to Tulsa, Oklahoma, with a firm delivery deadline of August 13, 2026. The product must fully comply with federal military specifications to ensure suitability for defense applications. Delivery is to be made FOB Destination, meaning the supplier assumes all responsibility and costs until the item is received at the specified location in Tulsa. The contract is classified as a subcontract under NAICS code 325520, associated with the Defense Logistics Agency within the Department of Defense. Although no solicitation number or point of contact is provided, the transaction is linked to a formal award record through the DLA’s procurement system. No set-aside provisions or additional procurement restrictions are indicated, and performance is expected to meet all technical and logistical requirements without deviation.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
Commercial Adhesive Hardener SupplyThe contract entails the supply of two units of commercial off-the-shelf adhesive hardener, identified by NSN 8040016531599, part number 83314, and CAGE code 98148, with full traceability required throughout the supply chain. The product must be delivered FOB destination to Fort Campbell, Kentucky, ensuring that all risks and responsibilities rest with the supplier until the goods reach the specified delivery point. The procurement falls under NAICS code 325520, classifying it within the chemical manufacturing sector, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, and the contract is managed through the DIBBS system with the referenced award and delivery identifiers. No set-aside provisions or specific small business preferences are indicated, and the point of contact information is not provided in the available data.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Manufacturing and Supply for NSN 8040013885620The contract requires the manufacture and supply of a specialized adhesive meeting the exact specifications identified by NSN 8040013885620, ensuring strict adherence to military and defense standards. Delivery is to be made FOB destination, meaning the supplier is responsible for all costs and risks until the product reaches the designated delivery point. The supplier must provide fully traceable shipping documentation to ensure end-to-end visibility of the product’s movement and comply with both DPAS ratings and Fast Pay program requirements, which emphasize priority processing and timely payment upon fulfillment of contractual obligations. The work falls under NAICS code 325520, categorizing it within the manufacturing of other chemical products, and is issued as a subcontract under the Defense Logistics Agency, a component of the Department of Defense. The contract was posted on August 5, 2026, and is associated with procurement activity under the contract number SPE8ES24D0005, with delivery tracked under SPE8ES26F75VG.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

New
DIBBS
LABEL
Solicitation # SPE8EN-26-Q-0071
This contract specifies the procurement of 125 units of item 7530-01-726-1345 under solicitation SPE8EN-26-Q-0071 with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with FOB origin and inspection and acceptance occurring at destination. All packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA-specific packaging requirements, including the use of packaging code U and no special marking. The item is designated as a critical application for Boeing and must meet FAA airworthiness approval requirements per CDRL FAACERTCOM-25015. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and configuration changes must follow formal engineering change proposal procedures. Sampling and inspection compliance defaults to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. All items must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation procedures outlined in DLAD Procurement Notes C19 and C20. The contract is federally sourced with no set-aside designation, and the point of contact is Jennifer Esworthy at DLA.

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 561910
New
DIBBS
LABEL
Solicitation # SPE8EN-26-Q-0070
This contract, issued under solicitation number SPE8EN-26-Q-0070, requires the delivery of 125 units of item 7530-01-726-1344, identified as a critical application item for The Boeing Company with part number BAC29PPS35968, under a firm fixed price agreement with no variance allowed in quantity. The item must be delivered within 30 days after notice to proceed, with inspection and acceptance occurring at the destination. All packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and packaging codes, while palletization adheres to DLA packaging requirements. Special marking is not required, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and configuration change management follows formal engineering change proposal procedures. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics. Federal Aviation Administration airworthiness approval and bare item marking requirements apply, and all data submissions must align with the specified CDRLs and referenced quality assurance provisions.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
New
DIBBS
LABEL
Solicitation # SPE8EN-26-Q-0069
The contract specifies the procurement of 125 units of item 7530-01-726-1343 under solicitation SPE8EN-26-Q-0069 at a firm fixed price with no variance allowed in quantity. Delivery is required within 30 days after the award date, with FOB origin and acceptance taking place at the destination. All items must comply with MIL-STD-2073-1E packaging standards and be marked per MIL-STD-129 without special marking codes. Packaging and preservation must adhere to DLA packaging requirements, including specific preservation methods, materials, and intermediate container protocols. The item is designated as a critical application with Boeing part number BAC29PPS35969 and requires FAA airworthiness approval, subject to the referenced quality assurance provision. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and configuration changes require formal engineering change proposals or variance requests. Sampling and inspection must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract mandates compliance with FAA bare item marking and government identification removal policies. The shipping destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation standards are governed by DLA Procurement Notes C19 and C20.

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS Management
Other Scientific and Technical Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Safeguarding
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 312230
New
DIBBS
Defense-Grade Packaging and Labeling Services
Tobacco Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
Computer Subassembly Manufacturing and Integration
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance Support (NIST SP 800-171)
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Documentation
Environmental Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Labeling Services
Other Warehousing and Storage

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334111
New
DIBBS
Supply of Commercial Off-The-Shelf (COTS) Computer Systems
Electronic Computer Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
Supply of Commercial Interface Units (COTS)
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details