TAPE, SEALING, STERILIZA

TAPE,SEALING,STERILIZATION INDICATOR
TAPE, SEALING,STERILIZATION INDICATOR
NOMINAL WIDTH 0.7 INCHES NOMINAL LENGTH 60.0 YARDS PREPRINTED DESIGN
EQUAL DIAGONAL LINES MARKING ACTIVATION METHOD STEAM TAPE SEAL STERILZ
INDICATOR STM PRESS SENSI ADH 13/4 IN X 60 YD (18MM X 55 M) 28S SPECIAL
FEATURES TAPE, SEALING, STERILIZATION INDICATOR, STEAM; PRESSURE
SENSITIVE ADHESIVE; 0.7 IN X 60 YD (18 MM X 55 M); PACKAGE OF 28
UNIT OF ISSUE PG(PACKAGE OF 28)
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RS013: Shelf-life requirement RS001 for a TYPE I (CODE K) item with a shelf life of 18 months (non-extendable) applies to this item.
SPE2DH-26-T-5453
SECTION B
SHALL HAVE A SHELF LIFE OF 18 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE
ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT.
LABELS SHALL INCLUDE: NSN MANUFACTURER AND CAGE DATE OF MANUFACTURE,
EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER
BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-628-0667 Quantity: 1 PG Purchase Request: 7017591558QTY: 1 Delivery: 20 days ADO