Top

Technical Data Package Management and Engineering Change Proposals

Active

Response Deadline09/15/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Navy → SPRMM1 DLA MechanicsburgView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QMH94.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ELECTRONIC COMPONEN — 5998013637550 — SPRMM126QMH94

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 25

subcontract

Response DeadlineSep 15

Submission deadline

Response Deadline

09/15/2026, 08:30:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Management of technical documentation including TDP version control and preparation of ECPs in accordance with DI-SESS-80639E for DoD compliance.

Similar Contracts

Same NAICS industry code

NAICS: 541330

New

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in Riverside County, California. The project encompasses a variety of professional services, including engineering, environmental assessments, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically targeted toward Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises. Interested firms must contact Charlie Brown at charles.brown@ghd.com to submit a qualifications package and request solicitation documents. While initial contact is requested by August 7, 2026, the final deadline to receive solicitation documents is 5pm PST on Friday, August 14, 2026, with a general response deadline of September 15, 2026. Relevant NAICS codes for this engagement include 541330, 237110, and 541490, among others.

POSTED

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals for the Corydon Well Replacement Project (Work Order C2305) on behalf of the Elsinore Valley Municipal Water District in California. This professional services agreement seeks qualified DBE firms to provide comprehensive design, bidding support, and engineering services during construction. The scope is divided into two phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of a new well and the abandonment of the existing one; Phase 2 covers architectural, civil, mechanical, structural, electrical, and I&C design drawings, as well as equipping, testing, and commissioning. Technical requirements specify the use of 24-inch diameter stainless steel Ful-Flo louvered well screens and compliance with AWWA potable water well construction standards, Riverside County, and California State Water Resources Control Board regulations. The contract is set aside for small and disadvantaged businesses, including DBE, WOSB, and SDVOSB entities. Award selection is based on the most advantageous proposal, considering both price and other factors. Key requirements include the provision of performance and payment bonds for 100 percent of the contract price, a bid guarantee of five percent, and adherence to California prevailing wage laws. Consultants must maintain active SAM registration and provide a project manager as the primary point of contact. Payment is processed via monthly itemized statements, with a 45-day review and payment cycle. Proposals must be submitted via PlanetBids by September 1, 2026, and must include a cover letter, a detailed project approach, staff resumes, a five-year representative project list, and three professional references.

POSTED

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, identified by contract number C2305, involves professional design, bidding support, and engineering services during construction for the Elsinore Valley Municipal Water District. Located in Lake Elsinore, Riverside, California, the project is managed by AKM Consulting Engineers. The solicitation was posted on August 17, 2026, with a response deadline of September 1, 2026. This opportunity falls under NAICS code 541330 and is open to Disadvantaged Business Enterprises through the Department of Transportation. Primary contact for the project is Katie Neubauer.

AKM Consulting Engineers

POSTED

DEADLINE

RFQ for Qualifications for Engineering Services

Solicitation # PE-78462-NONST-2026-000000001

The City of Whigham, Georgia, is seeking Statements of Qualifications from professional engineering firms to assist in planning, applying for, and administering state and federally funded public works infrastructure projects. The scope of work includes managing programs such as the Community Development Block Grant, Georgia Environmental Finance Authority, and the United States Department of Agriculture, as well as providing annual on-call engineering services. Selected firms must be licensed and technically qualified to handle the full project lifecycle, including identifying infrastructure deficiencies, preparing design reports and cost estimates, and managing permitting, bidding, construction administration, and inspection. Interested parties must submit their qualifications by September 28, 2026, in response to solicitation number PE-78462-NONST-2026-000000001.

POSTED

DEADLINE

EURAFCENT Multiple Discipline Support Services - Multiple ROICC Offices

Solicitation # N3319126R0033

This contract supports Resident Officer in Charge of Construction offices across the NAVFAC EURAFCENT area of responsibility by delivering construction management, quality assurance, and administrative services for ongoing construction contracts. It also encompasses professional architectural design, planning, and administrative support specifically for the NAVFAC EURAFCENT Headquarters in Naples, Italy. Only SEAPORT MAC holders are eligible to compete for this award, and the work will be performed across various locations within the EURAFCENT region, with administrative oversight centered in Naples. Services are critical to ensuring timely, compliant, and high-quality delivery of construction projects under NAVFAC’s maritime and expeditionary infrastructure programs. The solicitation, identified as N3319126R0033 and classified under NAICS code 541330, was posted on August 7, 2026, with a response deadline of September 8, 2026. The contracting office is part of the Department of Defense, operating under NAVFAC Systems Command Europe Africa Central, with primary point of contact Paul Martha reachable via email. The office address is listed as FPO AE 09622-0051, reflecting a deployed or military postal location, while performance locations span multiple sites throughout the EURAFCENT AOR without a single centralized physical location specified. This contract targets experienced defense contractors capable of managing complex, geographically dispersed construction environments with high standards of oversight and compliance.

Navfacsyscom Europe Africa Central

POSTED

DEADLINE

On-Call Telecommunications Facilities Entitlement Case Assessment And Management Services

Solicitation # 20260825070

The City of Pasadena in California is seeking proposals for on-call telecommunications facilities entitlement case assessment and management services under solicitation number 20260825070. This opportunity is categorized under NAICS code 541330 and is specifically for a SLED organization. The place of performance is located in Pasadena, California, 91101. Interested parties must submit their responses by the deadline of September 14, 2026, at 10:00 PM. Primary points of contact for this solicitation are Yannie Wu-Bowman and Antonio Watson. Further details and application instructions can be accessed through the BidAmerica portal.

POSTED

DEADLINE

On-Call Consultant Services For Development Services

Solicitation # 20260825065

The City of Anaheim Public Works Department, Development Services Section in California is seeking on-call consultant services for development services under solicitation number 20260825065. This opportunity is categorized under NAICS code 541330 and is intended for performance within Anaheim, California. Interested parties must submit their responses by the deadline of September 12, 2026. Further details and application processes are available through the BidAmerica portal.

City of Anaheim Public Works Department, Development Services Section

POSTED

DEADLINE

On-Call Professional Architectural & Engineering Services

Solicitation # 70020331 (REBID #1)

Guilford County is seeking Letters of Interest from qualified architectural and engineering firms to provide on-call professional services for various municipal capital improvement and infrastructure projects. The scope of work encompasses the entire project lifecycle, including planning, design, bidding, construction administration, and construction inspection. Firms may apply based on their specific technical skillsets and areas of expertise within the broad disciplines listed in the solicitation, and a single letter of interest is sufficient for those applying to multiple service types. This solicitation, identified as number 70020331 (REBID #1), was posted on August 26, 2026, with a response deadline of September 18, 2026. The contract is managed by the County of Guilford in North Carolina, with Christol Murphy serving as the primary point of contact. Interested parties must submit their qualifications by the specified deadline to be considered for these on-call professional services.

POSTED

DEADLINE

Architectural & Engineering Services

Solicitation # RFP-125390

The Virginia Housing Development Authority is soliciting proposals for Architectural and Engineering Services under solicitation number RFP-125390, with a response deadline of September 28, 2026. The contract is targeted at SLED entities and will be performed at 601 S. Belvidere St., Richmond, VA 23229, where all project activities and deliverables must be completed. Interested parties must submit their responses by the stated deadline to be considered for award. The contract does not specify a NAICS code or set-aside type, indicating it is open to general competition without preference for small, minority-owned, or other specialized business categories. Cheryl Price is the designated point of contact for inquiries and can be reached via email at cheryl.price@virginiahousing.com or by phone at 804-343-5723. Further details, including evaluation criteria and technical requirements, are available through the vendor portal link provided.

Virginia Housing Development Authority

POSTED

DEADLINE

Infrastructure - Request for Proposal - REQUEST FOR PROPOSALS (RFP) for PRIME CONSULTANT SERVICES for Lethbridge – Iroquois Group Home - Replacement

Solicitation # AB-2026-05940

The Infrastructure agency is seeking proposals for prime consultant services related to the replacement of the Iroquois Group Home located in Lethbridge, Alberta. This solicitation, identified by number AB-2026-05940, outlines the requirements for a professional consulting firm to lead the project's development and execution. Interested parties must submit their responses by the deadline of September 9, 2026, at 10:00 PM. The procurement process is being managed by Project Procurement Specialist Nkechi Nzewi, who serves as the primary point of contact for this infrastructure project.

POSTED

DEADLINE

CDD - As-Needed Capital Services

Solicitation # 549139

The City of Detroit Office of Contracting and Procurement, acting for the Construction and Demolition Department, is seeking proposals from qualified contractors to provide as-needed design-build services. The primary objective of this solicitation is to secure professional services for capital improvements that support new programming and operations while ensuring overall safety. This opportunity, identified by solicitation number 549139, was posted on August 25, 2026, with a response deadline of September 25, 2026. The project will be performed within the state of Michigan, and interested parties should coordinate with the eProcurement Team for further details.

POSTED

DEADLINE

Pricing and Project Estimation Services (Pre-Work)This subcontract, titled Pricing and Project Estimation Services (Pre-Work), is issued by the Texas Health and Human Services Commission under NAICS code 541330. The primary scope of work involves the preparation and submission of itemized cost estimates for non-emergency projects, which are subject to approval by a facility representative. The solicitation was posted on August 25, 2026, with a response deadline of September 9, 2026. Interested parties can find further details through the provided Texas SmartBuy link.

Health and Human Services Commission

POSTED

1 day ago

DEADLINE

in 14 days

View Details

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 335314

New

SWITCH,ELECTRONIC — 5895016432620 — SPRMM126QGG17

Solicitation # SPRMM126QGG17

This contract specifies the manufacture and quality requirements for an electronic switch, identified as part number 7DJG2 6K25RE-AC-WR1. The configuration must include specific components, including two 6K25RE-AC/6KP8-45-2MT units, a 6KP8-MTRJ/ALARM, and the installation of MNS-6K software. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD 2073. The contractor is responsible for all inspection and quality assurance, maintaining records for 365 days following final delivery. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update under Code 1. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead.

Relay and Industrial Control Manufacturing

POSTED

DEADLINE

ELECTRON TUBE — 5960008740507 — SPRMM126QGG20

Solicitation # SPRMM126QGG20

This contract outlines the requirements for the manufacture and supply of an electron tube, specifically identified by cage code 80070 and reference number 17-05660-1. The contractor must adhere to MIL-STD-130 for physical marking and MIL-STD 2073 for preservation, packaging, and packing. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update for identical items. The contractor is responsible for all inspection and quality assurance requirements, maintaining records for 365 days following final delivery. The government retains the right to perform independent inspections to ensure compliance. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided documents and drawings are subject to specific distribution statements to control the safeguarding of information.

POSTED

DEADLINE

ELECTRONIC MODULE,S — 5963016751169 — SPRMM126QGF57

Solicitation # SPRMM126QGF57

This contract governs the manufacture and quality requirements for electronic modules under the design represented by Cage Code 4U884 and reference number 5231724-100. Items must be physically identified according to MIL-STD-130 and packaged in accordance with MIL-STD 2073. The contractor is responsible for all inspection and quality assurance, with a requirement to maintain inspection records for 365 days following final delivery. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update where the items remain identical. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. The contract also specifies strict adherence to distribution statements for all Navy-provided documents and drawings to ensure proper safeguarding of information.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

VALVE,REGULATING,SY — 4820015102440 — SPRMM126QKH42

Solicitation # SPRMM126QKH42

This contract outlines the manufacturing and quality requirements for a regulating valve and a circuit card assembly. Key technical mandates include strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging. A critical safety requirement is the prohibition of metallic mercury and mercury contamination, as these items are intended for use on submarines and surface ships. For the circuit card assembly, the contractor must also comply with ANSI/ESD S20.20 for electrostatic discharge control. The contractor is responsible for all inspections and must maintain records for 365 days following final delivery. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. Only authorized distributors of the original manufacturer are eligible for award, and they must provide proof of authorization on company letterhead. All documents and drawings are subject to specific Navy distribution statements to control the safeguarding of technical information.

Industrial Valve Manufacturing

POSTED

DEADLINE

MULTIMETER — 6625013178373 — SPRMM126QMH54

Solicitation # SPRMM126QMH54

This contract outlines the requirements for the manufacture and supply of multimeters, specifically identifying designs associated with Cage Code 1LQK8 and reference numbers 3458A and 3458A-H52. The agreement mandates that items be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. Distributors are required to obtain the items directly from the original equipment manufacturer and must provide proof of authorization to be considered for the award. The contractor is responsible for all inspection and testing in accordance with original manufacturer specifications, with records maintained for 365 days following final delivery. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. The contract also specifies strict adherence to distribution statements for technical documents and drawings to ensure the safeguarding of sensitive information.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

MOTOR,ALTERNATING C — 6105012480192 — SPRMM126QMH14

Solicitation # SPRMM126QMH14

This contract outlines the requirements for the manufacture and supply of an alternating current motor, specifically identified by Cage Code 52374 and reference number 801621-084 REVJ. The agreement mandates strict adherence to MIL-STD-130 for physical identification and MIL-STD 2073 for preservation, packaging, and marking. Any substitutions or changes in design, material, or part numbers must be approved by the NAVICP-MECH Contracting Officer through a formal written change order, unless the change is a simple part number update under Code 1. The contractor holds primary responsibility for all inspection and quality assurance requirements, though the government reserves the right to perform independent inspections to ensure compliance. All inspection records must be maintained for 365 calendar days following final delivery. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide signed proof of authorization on company letterhead.

Motor and Generator Manufacturing

POSTED

DEADLINE

CHASSIS,VME — 5975016561234 — SPRMM126QMG97

Solicitation # SPRMM1-26-Q-MG97

This contract specifies the manufacture and quality requirements for the VME Chassis, identified by Cage Code 51398 and reference number RME21-3B2-VX21. The contractor must adhere to MIL-STD-130 for physical identification and MIL-STD 2073 for preservation, packaging, and marking. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update under Code 1. The contractor is responsible for all inspection and quality assurance, maintaining records for 365 days following final delivery. The government retains the right to perform independent inspections to ensure compliance. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. Distribution of technical documents is governed by OPNAVINST 5510.1 and specific distribution statement codes.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Contractor Information Systems

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling

Environmental Consulting Services

POSTED

DEADLINE

Military-Grade Packaging and Preservation Services

Other Warehousing and Storage

POSTED

DEADLINE

Electronic Component Manufacturing (Cage Code 91417 Compliant)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

VALVE,CHECK — 4820012244688 — SPRMM126QMJ07

Solicitation # SPRMM126QMJ07

This contract outlines the requirements for the manufacture and supply of check valves under solicitation SPRMM126QMJ07 for the Department of the Navy. The items must conform to specific design standards identified by Cage Codes 44674, 0GD25, and 22841, and must be physically identified according to MIL-STD-130. All supplied components must be completely free of asbestos, and any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. The contractor is responsible for all inspection and quality assurance compliance, with records of such work required to be maintained for 365 days following final delivery. Packaging and preservation must adhere to MIL-STD 2073. Additionally, the contract specifies that only authorized distributors of the original manufacturer will be considered for award, and they must provide proof of authorization on company letterhead.

Industrial Valve Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days

View Details