Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Documentation and Equivalency Testing Services

Active

Federal

Response Deadline08/04/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the submission of technical equivalency data, performance test reports, and compliance documentation to prove that non-identical PIT tags functionally match established standards and are fully compatible with the Biomark system. This includes demonstrating that the alternative tags perform identically in real-world conditions, ensuring no degradation in detection accuracy, signal strength, or longevity compared to the reference technology. All submitted materials must adhere to stringent validation protocols and provide verifiable evidence of functional parity across a range of environmental and operational scenarios. The solicitation is structured as a subcontract under NAICS code 541380 and was posted on July 28, 2026, with a response deadline of August 4, 2026. It is managed by the Office of Acquisition Grants within the Department of the Interior, though no specific place of performance or point of contact is listed. Contractors must deliver comprehensive documentation that meets technical and regulatory benchmarks without relying on identical components, emphasizing innovation and equivalence rather than replication. The effort is time-sensitive, requiring prompt and precise submission of fully validated data to support procurement decisions.

General Info

Submit validated technical data proving PIT tags functionally match Biomark system standards by August 4, 2026.

Agency

Department Of The Interior → Office Of Acquisiton GrantsView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Office Of Acquisiton Grants

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Office Of Acquisiton Grants

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide technical equivalency data, performance test reports, and compliance documentation to demonstrate functional parity of non-identical PIT tags with specified standards and Biomark system compatibility.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Counterfeit Electronic Parts Detection & Avoidance System ImplementationThe contract seeks the implementation of a comprehensive counterfeit electronic parts prevention and detection system to safeguard the integrity of components used in defense applications. This includes establishing rigorous supplier screening procedures, standardized part authentication protocols, and validated testing methods to identify and isolate suspect components. The contractor will be responsible for developing and maintaining a system that ensures consistent detection of counterfeit electronics throughout the supply chain, with clear processes for documenting, reporting, and escalating suspected nonconforming items. The system must comply with industry best practices and government standards for electronic parts reliability and supply chain security. This is a small business set-aside subcontract under NAICS code 541380, issued by the ASC Commodities Division of the Department of Defense, with proposals due by August 11, 2026. The work is intended to support defense logistics and procurement integrity, requiring the contractor to demonstrate technical capability in electronics verification, supply chain risk management, and reporting mechanisms. Although the place of performance and point of contact details are unspecified, the effort is expected to involve coordination across multiple tiers of suppliers and internal quality assurance teams to ensure end-to-end visibility and accountability. All activities must align with federal acquisition regulations governing small business participation and defense supply chain resilience.

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.

NASA Shared Services Center

POSTED

about 7 hours ago

DEADLINE

C26651005 Water Testing and Analyses ServicesThe contractor is required to provide comprehensive water testing and analytical services for public use water systems located in State Parks across western Sonoma County, California, including the collection and analysis of water samples gathered by park staff. This contract involves furnishing all necessary materials, tools, equipment, and labor to perform the testing, with results to be submitted to both the State Water Resources Control Board’s Division of Drinking Water and the California Department of Parks and Recreation. The scope of work is a re-bid of solicitation C25651009 and follows the detailed specifications outlined in the standard state agreement. The contract is being issued under solicitation number 0000039900, posted on July 28, 2026, with responses due by August 11, 2026, and the work will be performed within Sonoma County. Point of contact for inquiries is Leigia Nunez, reachable via phone or email provided.

California Department of Parks & Recreation

POSTED

about 21 hours ago

DEADLINE

Materials Testing & Laboratory ServicesThe contract titled Materials Testing & Laboratory Services requires the performance of comprehensive soil, concrete, and construction materials testing to verify adherence to ASTM, AASHTO, and specific project standards. The work is intended to support infrastructure and construction projects under the oversight of the River Valley Regional Commission in Georgia, ensuring that all materials meet required engineering and safety benchmarks before and during implementation. Testing services must be conducted with precision and documented thoroughly to maintain regulatory compliance and project integrity. This is a subcontract opportunity with a NAICS code of 541380, indicating it falls under the category of architectural, engineering, and related services. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 31, 2026, at 3:00 PM. The place of performance and specific location details are not provided, suggesting the scope may cover multiple sites within Georgia under the commission's jurisdiction. Bidders are expected to demonstrate established laboratory capabilities, qualified personnel, and familiarity with federal and state testing protocols to be considered for award.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Mill Certification and Quality Documentation ServicesThe contract requires the provision of comprehensive mill certification and quality documentation services for pipe shipments, with a focus on generating and submitting accurate mill test reports, heat numbers, tally sheets, and stenciled compliance data. All documentation must fully comply with the technical specifications of API 5L, ASTM A53B, and API 5LI standards to ensure the integrity and traceability of materials used in pipeline systems. The contractor is responsible for maintaining rigorous quality control throughout the documentation process to meet industry regulatory requirements and client expectations. This subcontract opportunity is issued by Philadelphia Gas Works under the NAICS code 541380 and is open for response until August 5, 2026. While no set-aside designation is specified, the work is expected to be performed in support of Pennsylvania-based infrastructure projects, though the exact performance location is not detailed. Bidders must ensure their capabilities align with the demanding documentation and compliance requirements and submit their proposals through the designated portal by the stated deadline.

Philadelphia Gas Works

POSTED

DEADLINE

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic LaboratoryThe Mississippi Department of Public Safety is soliciting bids for the annual calibration of instruments and equipment across all branches of the MS Forensic Laboratory, under solicitation number 1711-27-R-IFBD-00001. The solicitation, posted on July 28, 2026, requires responders to submit proposals by August 27, 2026, to ensure timely and accurate calibration services vital to forensic operations statewide. The work must be performed throughout Mississippi, with all equipment calibrated in accordance with industry standards to maintain the integrity of forensic analysis and legal proceedings. The contract is managed by the State and Local Government (SLED) agency, with Sonya Williams serving as the primary point of contact for all inquiries, reachable via phone or email. While no specific set-aside or NAICS code is indicated, the procurement is open to qualified vendors capable of delivering comprehensive, reliable, and compliant calibration services across multiple laboratory sites. Proposals must demonstrate technical capability, experience with forensic instrumentation, and adherence to quality assurance protocols to meet the rigorous demands of the state’s forensic infrastructure.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Quality Inspection and Conformance TestingThe contract requires execution of first-article or batch inspections to verify quality attributes classified as critical, major, and minor, using MIL-STD-1916 or ASQ Z1.4 sampling plans to ensure conformance with specified standards. Inspections must be carried out in accordance with zero-based sampling methodologies to validate product quality at predefined stages of production, ensuring compliance with rigorous defense-related quality expectations. The work is scoped under the NAICS code 541380, indicating a focus on engineering services, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Performance is designated to occur at Chambersburg, Pennsylvania, with a 17201-4150 zip code, and the submission window for proposals closes on August 10, 2026, following a July 28, 2026 posting date. The solicitation is managed through the DIBBS system under reference SPE7L126T884E, and bidders must be prepared to meet DoD quality assurance protocols with no flexibility in sampling methodology. While no set-aside type is specified, the contract requires full compliance with federal and military standards for inspection processes, and all work must be completed in alignment with the precise technical requirements outlined in the referenced standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract mandates radiological screening of filter assemblies to detect and notify the government if any radioactive materials exceed established regulatory thresholds, in full compliance with FAR 52.223-7 and MIL-STD-129 requirements. All filter assemblies must be inspected and documented to ensure they do not contain radioactive contaminants above permissible levels, and any discovery of such materials must trigger an immediate and formal notification to the contracting agency. This requirement applies to all deliveries under the subcontract and is intended to safeguard personnel, facilities, and the supply chain from potential radiological hazards. The solicitation is classified as a subcontract under NAICS code 541380 and is administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at San Diego, CA 92135-5000. Responses must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026. While no set-aside designation is specified, the contract emphasizes strict adherence to federal and military standards for radiological safety, and all participants must be prepared to provide verifiable testing documentation and notification protocols as part of compliance. No point of contact is listed, and all inquiries must be directed through the official DIBBS platform linked in the solicitation.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification & Labeling (If Applicable)The contract requires the detection and reporting of radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. All identified materials must be properly labeled according to MIL-STD-129 specifications, which dictate uniform marking and identification protocols for military shipments and inventory. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance obligated at Cherry Point, North Carolina, under the NAICS code 541380, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with no set-aside provisions specified, meaning it is open to all eligible contractors regardless of business size or status.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

First Article Testing (FAT) and Qualification ServicesThe contract calls for comprehensive First Article Testing (FAT) and qualification services in accordance with MIL-STD requirements, encompassing dimensional, material, and functional evaluations to ensure compliance with specified performance and quality standards. All testing outcomes must be documented and reported in full alignment with DI-NDTI-80809B guidelines, ensuring standardized, auditable deliverables that meet Department of Defense expectations for reliability and traceability. This subcontract supports critical sourcing efforts under the NAICS code 541380 and is managed by the LAND SUPPLIER OPNS VEHICLE SPT activity within the Department of Defense. Responses are due by August 7, 2026, and the solicitation remains open for qualified subcontractors ready to execute precise, standards-driven testing services. The work is expected to be performed wherever the supplier is located, with no specific geographic restrictions noted. This opportunity is not designated for any particular set-aside classification and is accessible to all eligible vendors capable of fulfilling the technical and reporting obligations outlined in the requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)If nonmetallic tubing is utilized in any system that contains licensed radioactive materials, immediate written notification must be provided to the Contracting Officer in accordance with 10 CFR regulations and established radiological safety protocols. This requirement is mandatory and applies to all subcontract activities under this agreement, ensuring compliance with federal standards for handling radioactive substances and maintaining the integrity of radiological controls. The obligation to notify is triggered solely by the presence of nonmetallic tubing in such systems, regardless of the volume or concentration of radioactive material involved. This contract is a subcontract under the Department of Defense’s MARITIME SUPPLY CHAIN ESOC BUYS, classified under NAICS code 541380, and was posted on July 28, 2026, with responses due by August 10, 2026. While specific performance location and point of contact details are not provided, the requirement is enforceable across all relevant work sites where contracted activities involve systems containing licensed radioactive materials. Failure to provide timely notification may result in noncompliance penalties and operational restrictions under federal radiological safety guidelines.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of The Interior → Office Of Acquisiton Grants

Same awarding agency

Logistics and Delivery Coordination for Riverine Field OperationsThe contract involves coordinating the final packaging, labeling, and secure delivery of PIT tags to Sacramento, California, with potential onward distribution to remote field sites along the Colorado and Little Colorado Rivers. All logistical activities must adhere to strict environmental protection standards during transit to ensure no harm to sensitive ecosystems or wildlife habitats. The work is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation services, and is managed by the Department of the Interior’s Office of Acquisition Grants. The solicitation was posted on July 28, 2026, with proposals due by August 4, 2026, requiring timely and precise execution to meet operational timelines for field research activities.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Preloaded 12mm PIT Tags (ISO 11784/11785 FDX-B Compliant)The contract mandates the manufacture and supply of preloaded 12mm Passive Integrated Transponder (PIT) tags that are fully compliant with the ISO 11784/11785 FDX-B standard, designed specifically for fish monitoring applications. These tags are to be preloaded into needles and must be fully compatible with Biomark scanning systems to ensure seamless integration and reliable data acquisition in field operations. All products must meet rigorous technical specifications for durability, signal consistency, and biocompatibility to support long-term tracking of aquatic species in natural and controlled environments. Issued as a subcontract under the NAICS code 334419, the opportunity is managed by the Office of Acquisition Grants within the Department of the Interior, with responses due by August 4, 2026. The contract does not specify a set-aside designation or a detailed place of performance, indicating flexibility in manufacturing and delivery logistics. Suppliers are expected to deliver fully tested, certified components ready for immediate deployment, with no requirement for additional configuration upon receipt. The solicitation remains open for proposals through the designated SAM.gov portal.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Pickup Preparation ServicesThe contract seeks comprehensive pickup preparation services for a trailer at the conclusion of fabrication, including final inspection, thorough cleaning, complete documentation, and proper staging to ensure readiness for government pickup. All work must be performed to meet federal standards and culminate in a trailer that is fully compliant, documented, and presented in a manner suitable for official collection by the Department of the Interior’s Office of Acquisition Grants. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, with the NAICS code 488999 indicating it falls under Other Support Activities for Transportation. Bidders must submit their proposals by August 6, 2026, at 3:00 PM, with the solicitation posted on July 28, 2026. While no specific location for performance or point of contact is provided, the work is expected to occur at the fabrication site prior to government pickup, and all deliverables must satisfy requirements for federal acceptance. The contract is accessible through the SAM.gov platform, and potential offerors must ensure their small business status is verified and active in the System for Award Management to qualify for submission.

All Other Support Activities for Transportation

POSTED

DEADLINE

Freight & Delivery ServicesThe contract seeks a small business to provide freight and delivery services for a completed marine trailer to the USGS PCMSC facility in Santa Cruz, California, with specific focus on logistics coordination and safe handling of oversized equipment. The work requires expertise in transporting large, specialized marine equipment, including planning for route feasibility, permits, and secure loading and unloading procedures to ensure the integrity of the vessel and compliance with transportation regulations. All activities must be executed to meet strict delivery timelines and safety standards aligned with federal guidelines for oversized cargo. This is a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 484121 for general freight trucking. The solicitation was posted on July 28, 2026, with a deadline for responses set for August 6, 2026, at 3:00 PM local time. The contract is issued under the Department of the Interior via the Office of Acquisition Grants and requires full compliance with federal procurement regulations. Delivery logistics must ensure timely arrival at the specified location in Santa Cruz, CA, with all necessary coordination managed by the contractor, including communication with the receiving agency for on-site acceptance.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Galvanized Structural Components SupplyThe contract involves the supply of hot-dip galvanized steel components specifically designed for trailer frames and structural elements intended to withstand the corrosive conditions of marine environments. The components must meet stringent corrosion resistance standards to ensure long-term durability and structural integrity under harsh coastal or offshore operating conditions. The solicitation is classified as a subcontract under a total small business set-aside, meaning only small businesses as defined by the SBA are eligible to respond, aligning with FAR 19.5 guidelines. The North American Industry Classification System code 332311 identifies the primary industry as primary metal product manufacturing, indicating the work requires specialized metal fabrication and coating expertise. The contract was posted on July 28, 2026, with a response deadline of August 6, 2026, at 3:00 PM. The acquiring agency is the Office of Acquisition Grants under the Department of the Interior, though specific location details for performance or contact are not provided. All submissions must comply with federal contracting requirements and demonstrate technical capability to deliver galvanized steel components meeting the specified environmental performance criteria. Participation is restricted to small business concerns, and vendors must be registered and active in SAM.gov to be considered for award.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Electrical System Integration & WiringThe contract seeks a small business subcontractor to install and integrate a specialized electrical system designed for harsh marine environments, including sealed wiring, LED lighting, rear strobe lights, and full integration with braking and hub pressurization systems to ensure durability and operational reliability under saltwater exposure and high humidity. The work requires precise engineering compliance to maintain system integrity, with all components meeting rigorous environmental standards for corrosion resistance, waterproofing, and long-term performance in offshore or coastal conditions. This is a total small business set-aside under SBA guidelines, classified under NAICS code 238210 for electrical contractors, and is issued by the Department of the Interior’s Office of Acquisition Grants. Responses are due by August 6, 2026, and the opportunity was posted on July 28, 2026, with no specified place of performance listed, implying flexibility in execution location. All subcontractors must demonstrate proven experience in marine-grade electrical installations and system integration to qualify for award consideration.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Precision Bunk System ManufacturingThe contract pertains to the fabrication of a custom bunk system constructed from ultra-high-molecular-weight polyethylene materials, designed to precisely conform to the three-dimensional hull model of a vessel to ensure maximum protection during transportation. The system must be engineered with high dimensional accuracy to match the vessel’s unique contours, minimizing movement and preventing damage during transit. All manufacturing processes must adhere to strict specifications ensuring material integrity, surface finish, and structural stability under operational loads. This is a small business set-aside subcontract under NAICS code 332999, with a response deadline of August 6, 2026, and was posted on July 28, 2026. The contracting entity is the Office of Acquisition Grants within the Department of the Interior, and the work is anticipated to be performed at an unspecified location. Participation is restricted to small businesses as defined by the Small Business Administration, and no point of contact or detailed physical address for performance is provided in the available data. All proposals must demonstrate technical capability to deliver a bespoke solution aligned with the vessel’s 3D hull geometry and comply with all applicable federal subcontracting requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Custom Marine Trailer Design & FabricationA custom gooseneck marine trailer with a triple-axle configuration is being procured under a Small Business Set-Aside contract, exclusively available to small businesses as defined by the SBA. The scope includes full design, engineering, and fabrication services to produce a high-performance trailer compliant with marine transportation requirements, featuring galvanized components for corrosion resistance, an integrated braking system, and complete lighting and wiring packages. All work must be completed to ensure durability, safety, and reliability in harsh coastal and aquatic environments. The solicitation was posted on July 28, 2026, with responses due by August 6, 2026, and is classified under NAICS code 336212 for boat building and repair. The contracting office is the Office of Acquisition Grants under the Department of the Interior, though specific performance location and point of contact details are not provided. The contract type is a subcontract, indicating it may be part of a larger procurement effort within the federal acquisition system.

Truck Trailer Manufacturing

POSTED

DEADLINE

59--FISH DETECTOR TAGS (PIT TAGS)The U.S. Geological Survey is seeking sources for preloaded 12mm passive integrated transponder (PIT) tags, specifically model APT12, to support fish population monitoring efforts under the Glen Canyon Dam Adaptive Management Program and the Long-Term Experimental and Management Plan requirements, as well as related biological opinion mandates. These tags are critical for tracking fish movement, survival, and behavior in the Colorado River system, ensuring data integrity for adaptive management decisions and compliance with federal environmental regulations. The solicitation, identified as 140G0326Q0182, was posted on July 28, 2026, with responses due by August 4, 2026, and is classified as a sources-sought notice under NAICS code 334419 for other electronic component manufacturing. The contracting office is located in Sacramento, California, and the primary point of contact is Joel Berberena, reachable via email at jberberena@usgs.gov. No set-aside criteria are specified, and all referenced attachments contain additional technical and operational requirements not detailed in the public posting.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Custom marine trailerThe contract is for a custom marine trailer under solicitation number 140G0326Q0179, posted on July 28, 2026, with a response deadline of August 6, 2026, at 3:00 PM Eastern Time. This is a combined solicitation reserved entirely for small businesses as defined under the SBA Total Small Business Set-Aside provisions of FAR 19.5, with the NAICS code 336212 indicating the manufacturing of boat trailers and other marine trailers. The contracting office is the Office of Acquisition Grants within the Department of the Interior, located in Sacramento, California, with a ZIP code of 95819. The place of performance is not specified in the provided data, leaving location details undetermined. The primary point of contact for inquiries is Anthony Berry, reachable via email at aberry@usgs.gov, with a phone number listed though currently unassigned. All proposals must be submitted through the official SAM.gov portal linked in the solicitation.

Truck Trailer Manufacturing

POSTED

DEADLINE

Cybersecurity Validation (Malicious Code Scanning)The contract requires the performance of pre-delivery malicious code scanning on all software and firmware components of the qPCR system to ensure compliance with GS0199 standards and federal cybersecurity requirements for deliverables to the U.S. Geological Survey. This effort is critical to safeguarding the integrity and security of the system prior to delivery, addressing potential threats that could compromise data, operations, or national infrastructure. The work must be completed in accordance with established federal cybersecurity protocols and validated to meet specific technical benchmarks. This subcontract is issued under the NAICS code 541512 for computer systems design services and is posted by the Office of Acquisition Grants within the Department of the Interior. Proposals must be submitted by August 4, 2026, and the performance location is unspecified, indicating flexibility in where the scanning activities may be carried out. The solicitation does not designate a set-aside category, and responses are expected from entities capable of demonstrating proven expertise in cybersecurity validation, malicious code detection, and adherence to federal standards governing scientific instrumentation.

Computer Systems Design Services

POSTED

DEADLINE

Accessibility Compliance Documentation (VPAT/ACR) SupportThe contract seeks support for preparing or validating an Accessibility Conformance Report using the VPAT 2.1+ template to ensure compliance with Section 508 standards, covering all aspects of ICT accessibility and functional performance criteria. This work is critical for demonstrating that products or services meet federal accessibility requirements and will involve detailed analysis, documentation, and validation to align with current federal guidelines. The effort requires expertise in accessibility standards, familiarity with VPAT 2.1+ structure, and the ability to interpret and apply Section 508 technical and functional performance requirements accurately. The opportunity is structured as a subcontract with a NAICS code of 541611, indicating it falls under administrative management and general management services. It was posted on July 27, 2026, and responses are due by August 4, 2026, at 5:00 PM. The contracting entity is the Office of Acquisition Grants within the Department of the Interior, though no specific place of performance or point of contact is provided. Interested parties must submit their proposals through the SAM.gov portal using the provided link before the deadline to be considered.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE