Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Technical Documentation & Specification Compliance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves reviewing and documenting the conformance of copper cable technical specifications with industry and regulatory standards, focusing on voltage ratings, UL certification details, and required labeling. This work ensures that all copper cable products meet mandated safety and performance criteria as defined by applicable codes and standards, with particular attention to accurate representation of electrical characteristics and compliance markings. The effort is critical to maintaining adherence to federal procurement and safety requirements associated with electrical infrastructure. This subcontract is issued under NAICS code 541330 for other technical services and is associated with the Grand Coulee Power Office within the Department of the Interior. It was posted on May 21, 2026, and performance location details are not specified. The nature of the work requires detailed technical analysis and precise documentation, aligning the cable specifications with federal and National Fire Protection Association standards without relying on third-party certifications for validity. All deliverables will be subject to internal quality verification to confirm full compliance with contractual obligations.

General Info

Review copper cable specs for voltage, UL, labeling compliance with federal and NFPA standards.

Agency

Department Of The Interior → Grand Coulee Power OfficeView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

WA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Grand Coulee Power Office
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Grand Coulee Power Office
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Review and document conformance of copper cable technical specifications including voltage ratings, UL information, and labeling requirements.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects. These services will span all phases of project delivery including planning, design, construction, and closeout, and will apply to various project delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The contractor will be responsible for ensuring projects adhere to established schedules, budgets, and quality standards while assisting the Port in achieving its infrastructure goals. This solicitation is classified under NAICS code 541330 and is forecasted for posting on July 18, 2026, with no set-aside designation specified. Primary point of contact for inquiries is Hala Rabbo, reachable via email or phone, with Ann Davidson serving as the Project Manager. All work is expected to be performed at Port of Seattle facilities, though specific location details are not provided. Interested parties should monitor the Port’s solicitation portal for the formal request for proposals when it becomes available.
Construction Management

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Building Commissioning and TestingThe contract outlines the commissioning and testing of HVAC systems within a building project under the City of Dallas, requiring comprehensive functional performance evaluations including airflow balancing, refrigerant charge verification, and validation of system operations against design intent. All testing must be documented to demonstrate compliance with LEED certification requirements or applicable energy efficiency standards, ensuring the building meets targeted sustainability and performance benchmarks. The work is structured as a subcontract with a NAICS code of 541330, indicating professional, scientific, and technical services related to engineering and testing. The solicitation was posted on July 17, 2026, with responses due by August 7, 2026, and no set-aside provisions are specified. While detailed agency contact information and specific performance location details are not provided, the work is expected to be performed in coordination with the City of Dallas, Texas, and all deliverables must align with the regulatory and environmental goals tied to energy compliance. The opportunity is accessible via an online portal, and potential bidders must ensure their methodologies, documentation, and testing procedures meet the rigorous standards required for certification and verification purposes.
City Of Dallas

POSTED

about 15 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541330
New
SLED
REQUEST FOR PROPOSALS (RFP) FOR ARCHITECTURE AND ENGINEERING SERVICES FOR TWO (2) AQUATIC CENTERSThe City of Dallas is seeking qualified architectural and engineering firms to deliver professional services for the design and development of two separate aquatic center facilities: the Singing Hills Aquatic Center and the Jaycee Zaragoza Aquatic Center. Each project will be awarded under an individual contract, ensuring distinct project management and performance requirements. Proposals must be submitted in response to two solicitation numbers, PKR-2026-00030846 and PKR-2026-00030847, with a deadline for submissions set for August 7, 2026, at 6:00 PM Central Time. All work will be performed within the state of Texas, specifically at the respective facility locations in Dallas. The solicitation was posted on July 17, 2026, and interested firms are directed to the official city procurement portal for detailed requirements and submission guidelines. Kamil Miskowiec serves as the primary point of contact for inquiries regarding the procurement process and can be reached via email.
City Of Dallas

POSTED

about 15 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541330
New
SLED
Specialty Inspection and Compliance VerificationA third-party inspection contract has been issued to verify the structural integrity, proper anchoring, and full compliance with Florida pool safety codes and local municipal standards for recreational water facilities. This subcontract is scoped to ensure all inspected pools and related infrastructure meet state-mandated safety requirements and are securely installed according to certified engineering practices. The inspection process will include on-site evaluations, documentation review, and formal reporting to confirm adherence to regulatory benchmarks established by Florida and applicable city authorities. The contract, titled Specialty Inspection and Compliance Verification, falls under NAICS code 541330 for architectural and engineering services and is managed by the Florida Parks and Recreation agency. It was posted on July 17, 2026, with a response deadline of August 18, 2026, allowing qualified inspectors or firms to submit proposals. The place of performance spans locations under Florida’s jurisdiction, though specific cities are not listed, and all work must be conducted in alignment with state and local safety regulations. This contract is not subject to set-aside classifications and is accessible through the procurement portal linked in the solicitation.
Parks and Recreation

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Structured Parking & Shared Parking DesignThe contract entails the design of a structured parking facility to accommodate over 265 transit users and an additional 182 spaces designated for a library and community center, with a focus on integrated shared parking strategies to optimize space utilization and operational efficiency. The scope includes conducting a comprehensive shared parking analysis to evaluate demand patterns, peak usage times, and synergies between transit ridership and community center visitors, ensuring the design supports seamless operational integration and minimizes redundant infrastructure. The project is categorized under NAICS code 541330 for architectural and engineering services and is structured as a subcontract solicitation with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, and performance is expected to align with local planning and transportation goals, though specific location details are not provided. The solicitation is publicly accessible via the OpenGov procurement portal, indicating transparency and a competitive bidding process aimed at selecting qualified design professionals to deliver a functional, scalable, and user-centric parking solution.
Engineering

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
On-Site & Off-Site Roadway and Traffic EngineeringThe contract pertains to the design of access roads, dedicated turn lanes, and traffic signal modifications aimed at enhancing multimodal traffic flows at a transit center. The scope of work focuses on engineering solutions that improve connectivity and efficiency for vehicles, pedestrians, and transit users, ensuring smoother and safer movement around the facility. All design efforts are intended to support integrated transportation networks and accommodate growing demand in a multimodal environment. This is a subcontract under the NAICS code 541330 for architectural and engineering services, posted on July 17, 2026, with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, though specific location details such as city or zip code are not provided. The project is managed through the Nashville procurement portal, and bidders must submit proposals by the stated deadline to be considered. While the agency organization and point of contact are unspecified, the performance location is tied to the transit center requiring these roadway and traffic enhancements.
Engineering

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Antioch Transit Center Design RFQThe Antioch Transit Center will be constructed on the former Global Mall site at 5252 Hickory Hollow Parkway, strategically located north of Bell Road and east of I-24, to serve as a multimodal transportation hub anchored by high-frequency Bus Route 55 connecting the Hickory Hollow area to Downtown Nashville. The facility is a foundational element of the adopted Global Mall Area Master Plan, which aims to transform the underutilized retail property into a vibrant, mixed-use district featuring cultural amenities, mixed-income housing, and retail spaces. The transit center will include 11 bus bays to accommodate current and future routes including the planned Crosstown Connector and Express services, structured parking with a minimum of 265 transit spaces and 182 additional spaces for the adjacent library and community center, approximately 4,000 square feet of passenger and employee amenities, and up to 19,000 square feet of ground-floor retail shell space. The design must integrate seamlessly with the surrounding community infrastructure, which includes Nashville State Community College’s satellite campus, the Ford Ice Center, the Southeast Branch of the Nashville Public Library, and the Metro Parks Southeast Regional Community Center, whose existing parking lot currently functions as a park and ride and WeGo Link transfer point. In addition to the transit center itself, the project requires comprehensive design services for on- and off-site roadway and traffic signal improvements to support increased multimodal traffic flows. These include new onsite access roads, dedicated turn lanes, and modifications to traffic signals, as outlined in supporting operational analyses and concept diagrams. The Consultant must align all design work with the 2024 Global Mall Area Master Plan and Specific Plan zoning BL2024-448, as well as incorporate findings from prior WeGo studies related to parking, transit operations, and future residential development potential atop the structure. The project has already completed its NEPA environmental review, relieving the Consultant of further environmental documentation responsibilities. Project management will be led by WeGo with oversight from the Capital Program Management Consultant, and the final design must prioritize rider experience, safety, accessibility, operational efficiency, and long-term economic vitality while accommodating future joint development opportunities with private partners. The solicitation closes on August 25, 2026, and responses are expected from architecture, landscape architecture, and engineering firms prepared to deliver a cohesive, forward-looking transit infrastructure aligned with Nashville’s broader mobility goals.
Engineering

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Uniform Quality Inspection and Compliance TestingThe contract titled Uniform Quality Inspection and Compliance Testing requires a third-party provider to conduct thorough inspections of uniforms to ensure material quality, stitching integrity, and full adherence to NFPA standards and procurement specifications. The inspection process will verify that all uniforms meet established safety and durability requirements critical for emergency medical personnel, with particular attention to compliance with federal and internal procurement guidelines. This subcontract is issued by the Emergency Medical Services agency in New York and is open for response until August 13, 2026, with a NAICS code of 541330 indicating it falls under the category of professional, scientific, and technical services related to testing laboratories. The inspection work will be performed regardless of specific location, as no place of performance has been designated, allowing flexibility for the contractor to conduct evaluations across supply chains or distribution centers as needed. The project is not designated for any specific set-aside and is open to eligible third-party inspection firms capable of delivering accurate, reliable, and documented compliance results. All findings must be meticulously recorded and submitted to confirm that every uniform batch meets mandatory safety and quality benchmarks prior to delivery to emergency responders. The contract is accessible through a public procurement portal, and interested parties must submit proposals by the specified deadline to be considered for award.
Emergency Medical Services

POSTED

about 19 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
DIBBS
First Article Testing (FAT) ServicesThe contract entails independent testing and validation of the first production unit of a branched wiring harness to ensure full compliance with established technical and military standards. This activity, known as First Article Testing, is critical for verifying that the design, materials, and manufacturing processes meet all specified requirements before proceeding with full-scale production. The scope includes conducting a comprehensive series of tests, analyses, and inspections, culminating in the generation of a complete FAT report that documents all findings, results, and compliance determinations. The work is being performed under a subcontract awarded by the Defense Logistics Agency, a component of the Department of Defense, with the NAICS code 541330 indicating it falls under engineering services. The testing must be conducted impartially and with strict adherence to defense-related quality protocols. Although the place of performance and point of contact details are not specified, the contract is tied to a specific procurement identifier and is publicly accessible through the DIBBS system, signaling its formal status within the DoD contracting framework. Completion of this FAT is a mandatory milestone before any further production orders can be authorized.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Government Acceptance SupportThis contract, titled Quality Inspection and Government Acceptance Support, is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and is classified under NAICS code 541330 for engineering services. The primary objective is to provide comprehensive support for government inspection and acceptance processes by ensuring all deliverables meet contractual obligations and Federal Acquisition Regulation 46 quality standards. Key responsibilities include the preparation and maintenance of detailed documentation, establishing and preserving traceability throughout the supply and production chain, and verifying full conformance to all specified terms and requirements. The contract was posted on July 17, 2026, and is tied to the award number SPE7LX26D0002 with delivery order SPE7L126FAU4Y. While specific performance location and point of contact details are not provided, the scope requires continuous adherence to federal quality protocols and an emphasis on meticulous recordkeeping to facilitate smooth government acceptance. The subcontractor must operate with precision to support Defense Logistics Agency objectives, ensuring that all systems, components, and processes comply with the rigorous quality assurance frameworks mandated by the Department of Defense.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
DIBBS
Value Engineering Change Proposal (VECP) DevelopmentThis contract pertains to the development of a Value Engineering Change Proposal aimed at identifying and implementing cost-saving design or process improvements within defense logistics operations. The work requires rigorous performance validation and comparative analysis to demonstrate measurable efficiency gains, resource reductions, or operational enhancements that can be endorsed by government authorities. The effort must align with established federal standards and deliver demonstrable results that justify adoption by the Defense Logistics Agency under the Department of Defense. The contract is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services focused on engineering support. Performance is expected to occur in alignment with the agency’s operational requirements, though specific geographic details are not provided. The solicitation was posted in mid-2026 and links to a formal award record through the DIBBS system, signifying its place within a broader procurement framework managed by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Higher-Level Inspection ServicesThe contract encompasses independent quality assurance services including audits, inspections, and test validation to ensure full compliance with Defense Logistics Agency quality standards and the Federal Acquisition Regulation provision FAR 52.246-11. These services are designed to uphold rigorous quality controls across all deliverables and processes, ensuring adherence to federal defense procurement requirements. The work is classified as a subcontract under the NAICS code 541330, indicating specialized engineering and technical services focused on quality assurance. The contract is issued by the Department of Defense through the Defense Logistics Agency with a posting date of July 17, 2026, and is intended for performance in an unspecified location. Although the place of performance and point of contact details are not provided, the contract’s scope clearly emphasizes objective oversight and validation activities critical to maintaining defense supply chain integrity. There is no mention of set-aside status, and the agreement operates under the standard framework for government subcontracting without specific geographic or demographic restrictions indicated.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of The Interior → Grand Coulee Power Office

Same awarding agency

NAICS: 561990
New
Federal
Vacuum-Type Street Sweeper Rental Services
All Other Support Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 562998
New
Federal
W--GCPO STREET SWEEPER RENTALThe contract solicitation 140R1026Q0002 is a total small business set-aside under FAR 19.5 for the rental of a vacuum-type street sweeper to serve the Grand Coulee Power Office in Grand Coulee, Washington. The base performance period is two months beginning February 26, 2026, with up to four additional two-month option periods extending the potential contract duration through April 21, 2030. The sweeper must be a 4-wheel vacuum model no older than five years with less than 5,000 operating hours, equipped with dual side brushes, a minimum swept path of 10 feet, a hopper capacity of at least 8 cubic yards, and a 12-inch minimum diameter vacuum hose with 16 feet of 8-inch tube extensions. Alternatively, a mechanical sweeper with vacuum capabilities may be accepted if it meets reduced but still stringent specifications. The equipment must be delivered FOB destination to the designated receiving location at the Grand Coulee Project and must be in ready-for-operation condition, meeting all federal and state regulations for roadworthiness and safety upon arrival. The contractor is responsible for all maintenance, repairs, and associated costs throughout the contract term. Offers must be submitted by February 20, 2026, at 12:00 PM Pacific Time through SAM.gov and must include completed Standard Form 1449, itemized pricing, current representations and certifications via SAM, insurance certificates, and documentation demonstrating technical capability and past performance. The award will be made on a best-value basis, evaluating technical capability, past performance, and price fair and reasonableness. The contract incorporates numerous FAR clauses including 52.212-4 and 52.212-5 with a February 2025 deviation for statutory implementation, 52.203-17 for whistleblower protections, 52.204-25 prohibiting certain telecommunications equipment, Buy American requirements, service labor standards, and prohibitions on covered applications and unmanned aircraft systems. Invoicing must be processed electronically through the Treasury’s IPP system, with supporting documents sent to the designated Bureau of Reclamation email. The contract is issued by the Bureau of Reclamation, Pacific Northwest Region, and is subject to amendments dated February 6, 2026, which clarified vendor questions, delivery specifics, and affirmed the closing date without
All Other Miscellaneous Waste Management Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335313
New
Federal
CIRCUIT BREAKERThe contract titled CIRCUIT BREAKER is a solicitation issued by the Grand Coulee Power Office within the Department of the Interior, targeting small businesses under a Total Small Business Set-Aside as defined by FAR 19.5. The NAICS code 335313 indicates the requirement pertains to the manufacturing of electrical equipment such as circuit breakers, aligning with the agency’s infrastructure and power system needs. This opportunity is open to qualified small business concerns, with responses required by July 23, 2026, at 4:00 PM ET, following a posted date of July 17, 2026. Performance location details are not specified, but the contracting office is located in Grand Coulee, Washington, 99133. All inquiries and correspondence should be directed to Donald Richer, the primary point of contact, reachable via email at donald_richer@ios.doi.gov or by phone at 509-633-9515. The solicitation is publicly accessible through the SAM.gov workspace portal, and bidders must ensure compliance with all federal acquisition regulations applicable to small business set-asides. No additional performance sites are listed, suggesting the work may be performed at the vendor’s facility or as otherwise agreed upon under the award. The contract does not specify quantity or delivery timelines, requiring proposers to address technical specifications and delivery capabilities within their submissions.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331420
New
Federal
NEW REQUIREMENT WHS WIRE CABLE STJ 16-6
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 541611
Federal
Small Business Subcontracting CoordinationThe contract requires support to assist the prime contractor in developing and managing a small business subcontracting plan that complies with FAR 52.219-9, ensuring adherence to federal regulations governing small business participation in federal contracting. This includes the coordination of planning, tracking, and reporting activities necessary to meet subcontracting goals and obligations as mandated by the government, with a focus on maintaining accurate records and timely submissions to demonstrate compliance throughout the life of the prime contract. The effort is centered on enabling effective integration of small businesses into the subcontracting structure while aligning with federal procurement policies. The work is linked to the North American Industry Classification System code 541611, indicating that the prime contractor operates in management, scientific, and technical consulting services, and the contracting activity falls under the Grand Coulee Power Office within the Department of the Interior. Although specific location details are not provided, performance is expected to support the agency’s obligations under the subcontracting plan framework. There is no stated set-aside designation, and the contract type is classified as a subcontract, meaning the support services are provided to a prime contractor rather than directly to the government. The solicitation was posted in May 2026, with no solicitation number listed, and all activities must be coordinated to ensure full compliance with federal small business subcontracting requirements.
Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 323113
Federal
Specialized Metal Packaging and PreservationThe contract involves the specialized packaging, preservation, and labeling of bronze components destined for shipment to Grand Coulee, WA, under the auspices of the Department of the Interior’s Grand Coulee Power Office. The work requires the use of advanced industrial methods including vapor corrosion inhibitor technology to protect sensitive metal surfaces during transit and storage, ensuring the components remain free from oxidation and environmental degradation. All packaging must meet stringent standards for durability, moisture resistance, and compatibility with bronze alloys, while labeling must be clear, compliant, and include necessary identification for traceability and handling. This is a subcontract under NAICS code 323113, which pertains to metal working machinery and equipment manufacturing, indicating the technical nature of the required services. Though no set-aside designation or solicitation number is provided, the contract is publicly posted with an anticipated commencement timeline aligned with 2026. The place of performance is fixed at Grand Coulee, WA, where the packaged components will be received and integrated into ongoing operations, and all work must be executed to support mission-critical infrastructure without disruption. The scope demands precision, adherence to industry best practices in metal preservation, and reliable logistics coordination to ensure timely delivery and integrity of the components upon arrival.
Commercial Screen Printing

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 331492
Federal
C93200 Bronze Alloy Material SupplyThe contract involves the supply of C93200 (SAE 660) high-leaded tin bronze in bar, rod, or plate form, adhering to specific technical specifications required for industrial or mechanical applications. This material is valued for its excellent machinability, wear resistance, and load-bearing properties, making it suitable for components in high-performance environments. The submission is structured as a subcontract under the NAICS code 331492, which categorizes it within other nonferrous metal die casting and foundries, indicating the nature of the manufacturing and supply activities involved. The contract was posted on May 22, 2026, and is associated with the Grand Coulee Power Office under the Department of the Interior, suggesting its use in infrastructure, power generation, or maintenance systems managed by the federal agency. The place of performance and detailed office address information are not specified, indicating flexibility in delivery logistics or an internal federal requirement for the material. There is no set-aside type listed, meaning the subcontract is open to all eligible suppliers without specific socioeconomic preferences. Prospective vendors must ensure full compliance with the technical requirements of C93200 material to meet performance and quality standards expected by the end user.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 331492
Federal
C92300 Bronze Alloy Material SupplyThe contract involves the supply of C92300 bearing bronze alloy in bar, rod, or plate form, specifically intended for government delivery under a subcontract arrangement. The material must meet precise specifications to ensure suitability for bearing applications, and delivery is governed by federal procurement standards despite the absence of a solicitation number or set-aside designation. The North American Industry Classification System code 331492 identifies the activity as other fabricated metal product manufacturing, indicating the work falls under specialized metal fabrication services. The awarding agency is the Grand Coulee Power Office within the Department of the Interior, though no specific location or point of contact is provided in the data. The place of performance is unspecified, suggesting delivery may occur to a federal facility managed by the Department of the Interior without fixed geographical constraints. The contract was posted on May 22, 2026, and is accessible via a SAM.gov link, indicating it is part of the federal government's official procurement platform for tracking subcontract opportunities.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Subcontractor Security & Compliance ManagementThe contract requires the administration of subcontractor compliance with stringent security protocols, focusing on the management of controlled unclassified information, the enforcement of security clauses, and the accurate reporting of foreign national access. Responsibilities include maintaining detailed access logs, ensuring all subcontractors properly flow down applicable security requirements, and adhering to federal standards for information protection and personnel screening. The work is linked to the Grand Coulee Power Office under the Department of the Interior and falls under NAICS code 541611, indicating it involves scientific and technical consulting services. The contract is classified as a subcontract with no specified set-aside designation, and performance locations are not defined beyond the federal agency context. All compliance activities must be executed in alignment with federal security mandates, with no physical office or point of contact provided, and the contract is accessible through the SAM.gov portal for further details.
Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 561410
Federal
Electronic Invoice Processing & IPP ComplianceThe contract requires the management of electronic invoicing through the Invoice Processing Platform (IPP), ensuring all invoices adhere to strict formatting and naming conventions to maintain system interoperability and operational efficiency. Contributors must rigorously exclude any personally identifiable information including Social Security Numbers to ensure compliance with data security and privacy standards. All submissions must be accurately structured and fully sanitized before transmission to the IPP to prevent processing errors or regulatory violations. This subcontract, issued under NAICS code 561410, is administered by the Grand Coulee Power Office within the Department of the Interior, and it pertains specifically to the handling and submission of invoices in a secure, standardized digital format. There is no specified set-aside classification or geographic performance location provided, and all tasks must be completed remotely through the designated platform. The contract was posted on May 21, 2026, and the primary obligation centers on consistent, error-free electronic invoice processing with an emphasis on data integrity and regulatory compliance.
Document Preparation Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541690
Federal
Sustainable Product Compliance & ReportingThe contract requires the delivery of products that fully comply with federal sustainability standards, with a specific mandate to adhere to the Federal Acquisition Regulation clause FAR 52.223-23 and the Department of the Interior’s DOI-AAAP-0028 guidelines. All delivered items must be evaluated and certified to meet environmental performance criteria established by these regulations, ensuring that procurement aligns with federal goals for energy efficiency, reduced environmental impact, and sustainable manufacturing practices. Compliance is not optional and must be rigorously documented and verified throughout the supply chain. In addition to product compliance, the contractor is obligated to provide detailed, ongoing reporting that demonstrates adherence to the specified sustainability requirements. This reporting must be structured to meet the format and submission timelines mandated by both FAR 52.223-23 and DOI-AAAP-0028, enabling transparent oversight by the Grand Coulee Power Office under the Department of the Interior. The contract is structured as a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services, and it is tied to federal procurement compliance rather than a competitive set-aside. Performance is expected to be executed in support of federal operations under the Department of the Interior, with no specified location for performance indicated, implying potential nationwide or site-specific delivery based on operational needs.
Other Scientific and Technical Consulting Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 331420
Federal
Copper Wire and Cable SupplyThe contract awards the supply of copper wire and cable products specifically engineered for government power operations, requiring strict adherence to technical specifications including precise voltage ratings and UL compliance standards. All products must feature sequential footage markings at five-foot intervals to ensure accurate installation and maintenance during deployment across federal power infrastructure. The procurement is structured as a subcontract under NAICS code 331420, indicating a focus on wire and cable manufacturing, and is managed by the Grand Coulee Power Office within the Department of the Interior. The solicitation was posted on May 21, 2026, with no set-aside designation specified, and no designated place of performance or point of contact provided in the public data. Performance is expected to support critical power system operations, necessitating reliable, traceable, and standardized cabling solutions meeting federal energy infrastructure requirements.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 2 months ago

DEADLINE

N/A
View Details