Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Support and Calibration Services

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the provision of technical support, setup assistance, and validation services for an analyzer system upon delivery, ensuring that all software functions are fully operational and that factory calibration is properly documented. The services are critical to confirming system readiness and compliance with operational standards before deployment. The contract is categorized as a subcontract under a Small Business Set Aside, specifically designated for small businesses, and falls under the NAICS code 541330 for other scientific and technical consulting services. It is managed by the Department of Defense through the agency FA4819 325 Cons Pkp, with performance required at Tyndall AFB, Florida, and the response deadline for submissions is August 14, 2026.

General Info

Technical support and calibration services for analyzer system at Tyndall AFB under small business subcontract.

Agency

Department Of Defense → FA4819 325 Cons PkpView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Tyndall AFB, FL, 32403, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4819 325 Cons Pkp

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4819 325 Cons Pkp

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provision of initial technical support, setup assistance, and validation of the analyzer system upon delivery, ensuring all software functions are operational and factory calibration is documented.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified firms. The project requires a range of professional services including engineering, environmental analysis, surveying, geotechnical work, permitting, public outreach, and utility location, with relevant NAICS codes covering architectural and engineering services, construction, and related specialized activities. The solicitation places particular emphasis on inclusion of SBA-certified small businesses and DBEs under the Department of Transportation program, encouraging firms with these designations to submit qualifications. Interested parties must submit their qualifications package and request solicitation documents by 5 p.m. PST on August 14, 2026, with responses due no later than September 15, 2026. All inquiries and submissions should be directed to Charlie Brown at charles.brown@ghd.com.

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, line-bid items for drilling and abandonment, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design, along with a line-item bid schedule for equipping, testing, and commissioning the new well. The well must comply with AWWA potable water standards, feature a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump systems, and tie into the Corydon Blend station and Malaga blending location, meeting all requirements from the State Water Resources Control Board, Department of Water Resources, and Elsinore Valley Municipal Water District. The consultant will prepare a Preliminary Design Report, review up to 200 submittals, assist with domestic water supply permit amendments, and develop record drawings reflecting field changes while supporting start-up, commissioning, and operator training. Proposals must demonstrate relevant qualifications and experience with utilities or government agencies, a clear understanding of the project scope, a feasible schedule with risk mitigation strategies, innovative yet practical solutions, cost transparency, and overall proposal quality. The award will be based on demonstrated competence and professional qualifications, not lowest cost. Submission requires strict adherence to formatting guidelines including a cover letter, detailed staff resumes, representative project lists, three professional references, district contract history, and a fully itemized cost proposal broken down by task. Required certifications and documentation include American Iron and Steel Compliance, Lobbying Certification, Debarment and Suspension Certification, System for Award Management information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration—all submitted via Attachment “2.” Additionally, the contractor must comply with Build America Buy America requirements, including domestic-content certifications and waiver memoranda for non-compliant materials, and adhere to federal mandates on telecommunications restrictions, anti-trafficking, environmental recovered materials, civil rights compliance, and sanctions against Iran and Russia. The proposal submission deadline is September 1, 2026, via the PlanetBids portal, with questions due by August 2

Ardurra Group, Inc.

POSTED

about 8 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The scope of work encompasses full-service engineering support from initial design through construction phase, ensuring technical accuracy, regulatory compliance, and efficient project delivery. The solicitation is open to qualified firms with experience in water system engineering and is specifically set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, reflecting a commitment to inclusive contracting. The project is identified under bid/contract number C2305 and falls under NAICS code 541330 for architectural and engineering services. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, and is being administered by AKM Consulting Engineers, which serves as both the contracting agency and point of contact. Primary communications regarding the solicitation should be directed to Katie Neubauer via phone or email provided. Although specific address details for the office or performance location are not listed, the project’s physical performance is confirmed to be in Riverside County, California. Interested parties are encouraged to review the full solicitation details through the official SBA opportunity portal to ensure alignment with all submission requirements and eligibility criteria for DBE participation.

AKM Consulting Engineers

POSTED

about 8 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves designing a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well on Elsinore Valley Municipal Water District property, with full engineering and construction support services required throughout both design and implementation phases. The scope encompasses hydrogeological evaluation, aquifer analysis, well design adhering to AWWA standards and matching the existing casing depth with a 24-inch stainless steel Ful-Flo louvered screen, civil and structural site design including grading, drainage, and utility coordination, mechanical and electrical engineering for well equipping, instrumentation and SCADA systems, geotechnical and soil testing, water quality sampling, environmental permitting with SWRCB and NPDES compliance, borehole geophysical logging, and comprehensive construction management with full-time on-site oversight during drilling and equipping. The project is divided into two phases: Phase 1 focuses on technical specifications, site design, bidding support, and construction management for drilling and abandonment, while Phase 2 covers detailed architectural, mechanical, structural, and electrical designs for facility equipping, testing, and commissioning, supported by engineering services during construction. Compliance with the Build America, Buy America Act and 2 CFR Part 184 is mandatory, requiring documented sourcing of domestic iron, steel, and manufactured products, along with certification of non-collusion and adherence to federal procurement rules. The consultant must submit a cost proposal with hourly rates broken down by task, capped at a not-to-exceed amount of $1,000,000, partially funded by a $400,000 BOR Grant, with the remainder covered by non-federal sources. The solicitation requires proposers to demonstrate relevant experience in municipal groundwater projects, provide detailed resumes of proposed key personnel including licensed California professionals, and confirm current certifications including DBE, MBE, WOSB, or small business status, as the set-aside prioritizes small, disadvantaged, and minority-owned businesses. Subcontractors must also meet these certifications and be disclosed in the proposal. Required documentation includes a Conflict of Interest Disclaimer, American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM registration, Public Works Contractor Registration, Executive Order N-6-22 Certification confirming no ties to sanctioned Russian entities, and a California Air Resources Board Certificate of Reported Compliance. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and must include a cover letter, three references, insurance

GEI Consultants, Inc.

POSTED

about 8 hours ago

DEADLINE

Engineering Services – Emergency Generator Installation for Municipal Wells (3 Sites)

Solicitation # 26-31

Murray City is seeking qualified engineering firms to provide professional services for the design, bidding, and construction support of emergency backup power systems at three municipal culinary water wells. The project, funded partly by a federal EPA Community Grant, must comply with all applicable requirements under 2 CFR Part 200 (Uniform Guidance) and has a budget of $120,000 for engineering services. The selection process involves a two-phase evaluation: Phase I includes independent scoring of Statements of Qualifications by the Selection Committee, followed by a discussion to identify the top three firms. Phase II consists of interviews with those shortlisted firms, after which scores from both phases are combined to determine the final ranking. If fewer than three qualified firms submit responses, the City will follow its code and federal regulations to determine the next steps. Submissions are due by September 7, 2026, and inquiries should be directed to Amandah Maudsley at amaudsley@murray.utah.gov. The project is located in Murray, Utah.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Forestry and Parks - Request for Proposal - ENGINEERING, DESIGN AND CONSTRUCTION ADMINISTRATION CONSULTANT SERVICES at Moose Mountain Parking Upgrades at Kananaskis Public Land Use Zone

Solicitation # AB-2026-05557

The Consultant will be responsible for reviewing and validating the Integrated Development Plan for parking area upgrades at three locations within the Kananaskis Public Land Use Zone — the Base of Moose Mountain Road, the 2 Kilometer Parking Area, and the Top of Moose Mountain Road — with total new disturbances of approximately 0.429 hectares across the sites. This includes conducting field validation of proposed improvements, refining designs based on ground conditions, constructability, environmental constraints, regulatory compliance, traffic flow, parking functionality, and operational needs, all while adhering to approved disturbance limits unless additional approval is obtained from Alberta Forestry and Parks. The Consultant must apply proven non-urban park design practices throughout all project phases, from assessment and conceptual design through detailed design, regulatory approvals, tender documentation, construction administration, and final project close-out. The work requires full engineering and design services to deliver safe, efficient, and environmentally responsible parking infrastructure upgrades, including improved traffic circulation, vehicle movement, and site access. The project must be initiated within five business days after contract execution and completed by February 28, 2028, with all design, approvals, and construction oversight delivered on schedule. The locations are precisely defined by geographic coordinates, and the Consultant must work closely with the Province to ensure alignment with all regulatory, environmental, and operational expectations. The project is managed by Alberta Forestry and Parks, with Monica Purewal serving as the primary point of contact, and the solicitation number AB-2026-05557 governs all aspects of engagement.

Forestry and Parks

POSTED

about 15 hours ago

DEADLINE

Design Phase – Bus Wash RehabilitationThe contract seeks the development of comprehensive design documentation for bus wash and steam-cleaning systems as part of a rehabilitation effort, requiring detailed concept designs, construction drawings, and technical specifications to support full implementation. The work is classified under NAICS code 541330, indicating engineering services, and is structured as a subcontract under the Georgia Transportation Efficiency Authority, with responses due by September 24, 2026. The project emphasizes precision in system design to ensure operational efficiency, durability, and compliance with facility requirements for bus maintenance infrastructure. All deliverables must align with industry standards and be tailored for use within Georgia’s transportation maintenance facilities, though specific performance locations and contact details are not provided. The solicitation was posted on August 6, 2026, and interested parties must submit proposals through the designated state portal by the deadline.

Georgia Transportation Efficiency Authority

POSTED

about 16 hours ago

DEADLINE

in about 2 months

26-0088-2 Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction

Solicitation # PE-77548-NONST-2027-000000401

Chatham County is soliciting proposals from qualified consulting firms to provide professional engineering services for pavement and drainage improvements along Wahlstrom Road and Forbes Road, aiming to resolve existing drainage issues and enhance the structural integrity of the roadway. The project requires a comprehensive evaluation of the current pavement conditions and the development of targeted recommendations for resurfacing and structural upgrades capable of supporting the high volume of heavy truck traffic alongside regular passenger vehicles. The selected firm must assess existing infrastructure, identify deficiencies, and propose durable solutions that extend the service life of the roads while improving overall performance and safety. The solicitation, titled Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction with number PE-77548-NONST-2027-000000401, was posted on August 6, 2026, with a response deadline of September 8, 2026. The work is to be performed within Chatham County, Georgia, and the procurement is conducted under the state’s SLED agency framework. Interested firms should submit their proposals by the stated deadline, with all inquiries directed to Sabrina Tippett at stippet@chathamcounty.org. The opportunity is open to qualified vendors with demonstrated expertise in roadway design, pavement analysis, and drainage system engineering.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Engineering and Regulatory ComplianceThe contract entails the preparation of PE-stamped engineering drawings and the full spectrum of permitting and regulatory compliance activities required for projects in Maui County, adhering strictly to the Uniform Development Code, NFPA standards, API specifications, and all applicable local ordinances. This subcontract requires expert knowledge of regional regulatory frameworks and the ability to navigate the permitting process efficiently to ensure projects meet all technical, safety, and legal requirements. The work must be executed by qualified professionals capable of producing stamped documentation that satisfies both state and county authorities. All deliverables must be completed by the response deadline of August 27, 2026, and the contract is classified under NAICS code 541330 for architectural, engineering, and related services. The contracting entity is the County of Maui in Hawaii, with no specific set-aside provisions indicated. Performance of the work is expected to occur within Maui County, and while no point of contact is listed, bidders must submit responses through the official public procurement portal prior to the deadline to be considered.

POSTED

about 17 hours ago

DEADLINE

SCADA System Design and IntegrationThe contract entails the engineering and integration of a cellular SCADA system for the City of Booneville’s water system, focusing on the design of system architecture, network infrastructure, and interoperability frameworks to ensure seamless communication and operational control across water distribution components. The work requires thorough planning to align cellular communication protocols with existing water infrastructure, enabling real-time monitoring, remote control, and data acquisition without compromising reliability or cybersecurity standards. The solicitation is open as a subcontract under NAICS code 541330, administered by MPTAP through the Mississippi Department of Finance and Administration, with proposals due by September 8, 2026. The project demands technical expertise in industrial automation, wireless network deployment, and utility systems integration, with performance expected to support long-term operational efficiency and regulatory compliance for the city’s water services. While detailed location and point of contact information are unspecified, the scope is clearly defined around enabling a modern, secure, and scalable SCADA solution tailored to Booneville’s unique water system requirements.

POSTED

about 18 hours ago

DEADLINE

in about 1 month

City of Calgary - Notice of Planned Procurement - NPP 26-066-Sunalta Main Street Phase 2 Detail Design

Solicitation # AB-2026-05541

The City of Calgary is soliciting consulting services to advance the Sunalta Main Street project from conceptual design to a detailed, construction-ready design, leveraging prior planning and schematic design efforts. The goal is to produce comprehensive documentation and engineering details required for construction, ensuring the project meets municipal standards and community objectives. This phase builds on existing groundwork to finalize street layout, utilities, landscaping, pedestrian infrastructure, and other public realm elements critical to the project’s success. Interested firms must submit responses by August 20, 2026, through the Alberta Purchasing Connection portal under solicitation number AB-2026-05541. The procurement is managed by Ahsan Farhan, the primary point of contact, and the work will be performed within the City of Calgary in Alberta. While no specific set-aside provisions or NAICS codes are indicated, the contract emphasizes technical expertise in urban design and transportation engineering to deliver a viable, detailed design package ready for tendering and construction.

City of Calgary

POSTED

about 19 hours ago

DEADLINE

City Wide Water Rights Assessment and Well 4 and 5 Production Assessment

Solicitation # PWE - 8.21.2026 (2)

The City of Issaquah is seeking a qualified consulting firm to conduct a comprehensive assessment of its water rights and the production capacity of wells 4 and 5, with the goal of informing the strategic buildout of its water system. The project entails evaluating the current yield and performance of wells 4 and 5, investigating all active and inactive water rights across the city, and determining opportunities to consolidate, relocate, or acquire new rights to better align with the planned water treatment facility and future infrastructure needs. The consultant will also review historical data, including past PFAS-related studies and aquifer analyses from 1999 and 2016, analyze the causes of production decline in Well 4, and assess whether existing monitoring wells can satisfy data needs before recommending new installations near the Gillman wells. Additional tasks include verifying if Well 4 can achieve its historic output of 240 gpm and ensuring Well 5 delivers flow consistent with its allocated water right, all while presenting a cost-benefit analysis comparing the financial implications of water right conversions versus continued water purchases from Cascade. Phase 1 is targeted for completion by early Q2 2027 to support Water Treatment Plant planning, while Phase 2 must be finalized by December 31, 2027 to inform the Gilman Wellhouse replacement project. The selection process is qualifications-based, with award determined by a weighted evaluation of the firm’s qualifications (30 points), relevant experience (20 points), key staff competency and availability (20 points), project management effectiveness (10 points), familiarity with local and external permitting requirements (10 points), and responsiveness to the RFQ (10 points). The highest-scoring respondents may be invited for interviews to clarify submissions. The winning firm must meet strict insurance requirements, including $1 million automobile liability, $2 million commercial general liability with the City named as an additional insured, $2 million professional liability with errors and omissions coverage, and compliant workers’ compensation under Washington State law. Insurance carriers must hold an A.M. Best rating of at least A:VII, and all policies must be primary for the City. Key personnel, including the Project Manager, must be approved in advance and cannot be replaced without written consent, and replacements must match or exceed the original qualifications. The firm must certify it is not suspended or debarred, and its principals must not have been convicted of fraud, antitrust violations, embezzlement, or other serious offenses in the past three years.

City of Issaquah

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → FA4819 325 Cons Pkp

Same awarding agency

Supply of System Accessories and Calibration LoadThe contract involves the supply of genuine Anritsu accessories essential for field testing and calibration, including a Field Accessory Kit, Tri-Axis Isotropic Antenna, Directional Antenna Handle, Log-Periodic Antenna, and a Precision N(f) Calibration Load, all specified by exact part numbers. These components are critical for maintaining measurement accuracy and operational readiness in electromagnetic environment testing. The solicitation is structured as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, and is governed under NAICS code 334515, which pertains to navigational, measuring, electromedical, and control instruments manufacturing. The opportunity was posted on August 6, 2026, with a response deadline of August 14, 2026, at 5:00 PM, requiring timely submission from eligible vendors. Performance of the contract is to take place at Tyndall Air Force Base, Florida, with the Department of Defense through the FA4819 325 Cons Pkp office as the contracting entity responsible for oversight.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Supply of Anritsu LMR Master S412E Handheld Analyzer SystemThe contract entails the supply of one Anritsu LMR Master S412E Handheld Analyzer system equipped with all factory-installed software options, including Vector Voltmeter, Interference Analysis, GPS, Coverage Mapping, EMF Measurement, and P25 Signal Analysis, ensuring full capability for land mobile radio system testing and field diagnostics. The system is intended for use at Tyndall Air Force Base, Florida, with a zip code of 32403, and is being procured under a subcontract classified as a Small Business Set Aside - Total, meaning only qualified small businesses are eligible to respond. The solicitation was posted on August 6, 2026, with a response deadline of August 14, 2026, at 5:00 PM Eastern Time. The North American Industry Classification System code for this procurement is 334515, indicating the focus on navigational, measuring, electromedical, and control instruments manufacturing. The contracting activity is under the Department of Defense, specifically the FA4819 325 Cons Pkp organization, and is subject to federal acquisition regulations applicable to military and defense-related procurements. All deliverables must meet technical specifications for operational deployment in field environments consistent with U.S. Air Force communication and monitoring requirements.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Anritsu LMR Master S412E Handheld Analyzer System and Accessories

Solicitation # FA481926Q0079

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting a single Anritsu LMR Master S412E Handheld Analyzer System along with all required accessories to support the 325th Communications Squadron. This is a brand-name acquisition requiring the specific Anritsu model, which must deliver comprehensive functionality including Land Mobile Radio maintenance, spectrum analysis, cable and antenna testing, GPS-based coverage mapping, distance-to-fault detection, vector voltmeter measurements, and EMF assessments—all through a single portable handheld device. The requirement is strictly for the specified system as outlined in the Salient Characteristics, and vendors must demonstrate full compliance through submitted quotes that include pricing, estimated delivery timelines, and supporting technical documentation. This procurement is conducted as a 100% Small Business Set-Aside under NAICS code 334515 for Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Product Service Code of 6625. All offers must be submitted via email to SSgt Sean-Austin Maguire and SSgt Rebecca Cudjoe by 1:00 PM CDT on 14 August 2026; late or incomplete submissions will not be considered. Questions regarding the solicitation must be submitted in writing via email no later than 1:00 PM CDT on 11 August 2026, and responses will be posted as amendments to SAM.gov. The contract is administered under solicitation number FA481926Q0079 and performance will occur at Tyndall Air Force Base, Florida.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Tyndall Mess Attendant Recompete

Solicitation # FA481926R0001

The contract is for mess attendant support services at the Berg-Liles Dining Facility on Tyndall Air Force Base, Florida, under the full operational and management control of the 325th Fighter Wing Force Support Squadron. The contractor is responsible for daily food service tasks including serving and replenishing meals, cleaning facilities and equipment, preparing vegetables and fruits for self-service bars, assembling cold cuts and cheeses for deli stations, wrapping sandwiches, portioning pastries, and providing cashier services. The contractor must adhere to the Tri-Service Food Code, federal regulations, and specific standards outlined in the Performance Work Statement, but is explicitly prohibited from exercising any operational control over the facility, which remains entirely under Air Force oversight. In contingency situations, the contractor may be required to temporarily provide cooks to maintain dining operations. The scope of work also includes equipment maintenance, repair, and ensuring coverage for ethnic and specialty food stations. The solicitation, identified as FA481926R0001, has undergone multiple amendments to refine requirements, update documentation, and adjust timelines. Initial amendments revised the Performance Work Statement, updated pricing matrices with Government-determined Not-to-Exceed (NTE) values, and clarified workload estimates for weekdays, weekends, and holidays. A prolonged Question and Answer period was opened to accommodate vendor inquiries, culminating in the extension of the proposal deadline to May 1, 2026. However, the process was suspended indefinitely following a protest filed with the Government Accountability Office (GAO) in April 2026, which has now been formally dismissed. As a result, the Government intends to reissue the solicitation with a minimum 30-day reopening period, updated workload data aligned with a revised Period of Performance beginning October 1, 2027, and further administrative corrections. The contract is set aside under the 8(a) program for small disadvantaged businesses and is managed by the Department of Defense through the Tyndall AFB office, with primary point of contact Scott Dubuque.

Food Service Contractors

POSTED

DEADLINE

in about 2 months

Synopsis - Notice of Intent to Award a Sole Source - Temporary Module Facilities Lease

Solicitation # FA481926C0022

The government intends to award a sole-source contract to Williams Scotsman Inc. for the lease of temporary module facilities at Tyndall Air Force Base, Florida, under NAICS code 531120 for lessors of nonresidential buildings. The contract period will run from September 1, 2026, through August 30, 2030, and is justified under 10 U.S.C. 3204(a)(1) and 41 U.S.C. 3304(a)(1) because Williams Scotsman Inc. is the sole responsible source that currently owns and maintains the facilities in use, and no other alternatives meet the agency’s requirements. Although this is a pre-solicitation notice and not a formal request for competitive proposals, all responsible sources may submit capability statements or quotations prior to the deadline of August 20, 2026, at 3:00 p.m. CDT for consideration. The contract will be managed by the 325th Contracting Squadron, with primary point of contact David Hackney and secondary contact Mercedes Bruce, and the solicitation number is FA481926C0022.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Vehicle Wash Rack System Installation — Tyndall Air Force Base

Solicitation # FA481926Q0058

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting proposals for a firm-fixed-price contract to furnish, install, and commission a complete vehicle wash rack system supporting two interior vehicle wash bays and one exterior bay designed for larger vehicles. The scope includes all labor, materials, equipment, and supervision necessary to deliver a fully operational system integrated with existing utilities, including a high-pressure pump system with variable frequency drive, air compressor, freeze protection, and control systems. The contractor must also execute system startup, testing, commissioning, provide 30 gallons of initial chemicals, and conduct operator training for Government personnel. Work must be completed within 60 calendar days of contract award at Building 36276 on Tyndall AFB, with final inspection and acceptance occurring at that location. The contract is a total small business set-aside under NAICS code 238290, and all proposals must comply with the detailed Statement of Work provided as an attachment. Proposals must include a complete Firm-Fixed-Price quotation for three contract line items (CLINs 0001–0003) and a detailed technical capability submission demonstrating how the offeror will meet the SOW requirements, with blank statements of compliance deemed unacceptable. Evaluation will be based on a trade-off approach equally weighing price and technical capability, with award made to the offeror providing the most advantageous solution. The solicitation mandates compliance with numerous Federal Acquisition Regulation clauses including those related to small business size certification, employment equity, labor standards, cybersecurity protections under NIST SP 800-171, prohibitions on counterfeit parts and foreign telecommunications equipment, and contractor personnel identity verification. All contractors must register in SAM.gov, submit proposals via email to the Contracting Officer by the deadline, and submit names of personnel requiring base access with formal requests. The Contracting Officer’s Representative, SrA Jose Rosado-Figueroa, will handle inspections and acceptance, and all payments must be processed electronically through WAWF using specified DoDAACs. Site visits are scheduled for July 28, 2026, and questions must be submitted by August 3, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

Supply of John Deere XUV 845R Premium Cab UTVs with Military ComplianceThe contract solicits the supply and delivery of three John Deere XUV 845R Premium Cab UTVs, each equipped to meet stringent military specifications including MIL-STD-130 for item identification and MIL-STD-129 for packaging and labeling requirements. These vehicles are to be delivered F.O.B. destination to Tyndall Air Force Base in Florida with a zip code of 32403, ensuring full compliance with Department of Defense standards for asset tracking and logistics readiness. The procurement is structured as a subcontract under a Small Business Set Aside, designated as total, meaning only small businesses are eligible to bid, and it falls under the NAICS code 336120 for motor vehicle manufacturing. The opportunity was posted on August 4, 2026, with a hard deadline for responses on August 12, 2026, at 5:00 p.m., and is managed by the FA4819 325 Cons Pkp agency under the Department of Defense.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

John Deere 845R Premium Cab XUVs

Solicitation # FA481926Q0074

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for three John Deere Gator XUV845R Premium Cab Utility XUVs to support logistics operations by the 325th Logistics Readiness Squadron. These vehicles are specifically required for safe and efficient transportation of personnel and heavy flight line equipment, with a mandatory towing capacity of at least 4,000 pounds to handle full fuel bowsers, necessitating a brand name acquisition for the exact model due to strict safety and performance standards. The procurement is structured as a 100% Small Business Set-Aside under NAICS code 336999 and classified under Product Service Code 2310 for Passenger Motor Vehicles. Vendors must submit complete quotes that include pricing, delivery timelines, and supporting technical documentation to confirm compliance with all specifications. Offers are due by 1:00 PM CDT on August 12, 2026, and must be sent via email to SSgt Sean-Austin Maguire and SrA Samuel Pendleton; submissions received after the deadline or lacking required details will be disqualified. The contract is issued under solicitation number FA481926Q0074, with performance to occur at Tyndall AFB, Florida.

All Other Transportation Equipment Manufacturing

POSTED

DEADLINE

AFCEC Operation Support Services

Solicitation # FA481926R0019

The Air Force Civil Engineer Center at Tyndall Air Force Base, Florida, is seeking qualified small businesses certified under the 8(a) program to provide comprehensive operation support services under a firm fixed-price contract. This acquisition, designated as a total small business 8(a) set-aside, is governed by the Revolutionary FAR Overhaul Part 5 and follows RFO Part 12 for the acquisition of commercial services, with the NAICS code 541990 and a size standard of $19.5 million in annual revenue. The contractor will support baseline operational functions across AFCEC facilities including Building 1117, the 9700 area, the Silver Flag fire research area, and other test ranges, performing tasks such as facility maintenance, producing prototypes and test articles, and assisting the Air Force Pavement Evaluation Team and other RDTE initiatives. All work must adhere to applicable federal laws, Air Force standards, and commercial practices, with performance strictly tied to the detailed Performance Work Statement. The contract includes a base period of twelve months and four optional one-year extension periods, making the total potential duration five years. Proposals must be submitted via the Governmentwide Point of Entry at sam.gov by the deadline of September 8, 2026, and no paper copies will be distributed. Interested parties are responsible for monitoring sam.gov for the official solicitation release, which will be posted under solicitation number FA481926R0019 and made available on August 4, 2026. The government will not conduct a site visit prior to the proposal deadline. Evaluation will use Best Value Trade-Off procedures to select the offeror providing the highest overall value to the government. Only entities currently registered in the System for Award Management (SAM) are eligible to respond. Questions must be submitted in writing by August 14, 2026, to the designated point of contact, Cleville Yarbrough, or Scott Dubuque. The place of performance is Tyndall AFB, Florida, with all services required to be delivered on-site to support AFCEC missions and its affiliated organizations.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

in about 1 month

Solicitation # FA481926Q0057

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for a 6,000-gallon self-contained fuel dispensing system to serve as a centralized refueling point for AVGAS and Jet-A fuel at the new AGE facility, Building 200. The requirement is designated under NAICS code 332420 for Metal Tank (Heavy Gauge) Manufacturing and PSC 5430 for Storage Tanks, and is set aside exclusively for small businesses. Vendors must submit detailed quotes demonstrating compliance with all technical, logistical, and safety specifications outlined in the attached Salient Characteristics document, which includes exact dimensions, tank requirements, and safety standards. The solicitation has been amended twice to extend the submission deadline, with the final due date set for 7 August 2026 at 1:30 PM CDT. Proposals must be submitted via email to the designated point of contact, Amn Juan Lopez Ramirez and SrA Ryan Crisostomo, and must include pricing, delivery lead time, offloading and installation details, and any supporting technical literature. Incomplete or late submissions will not be considered. All additional documentation, including the Statement of Work and Salient Characteristics dated 28 July 2026, are attached to the solicitation, though no details on evaluation criteria, contract clauses, delivery schedules, payment terms, packaging, inspections, or representations are evident in the available information.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

in about 6 hours

Physical Security System Maintenance

Solicitation # FA481926Q0045

The U.S. Air Force’s 325th Contracting Squadron at Tyndall Air Force Base is soliciting maintenance, service, and support for the OnGuard Lenel Access Control System located at Eglin Air Force Base, Florida, serving the 53rd Wing and 692nd Cyber Operations Squadron. This procurement, identified as FA481926Q0045, is a Total Small Business Set-Aside under NAICS Code 561621 and is structured as a Request for Quote with a firm fixed-price contract spanning a base year and five option years, totaling up to six and a half years of performance through February 2032. The scope requires the contractor to ensure full operational capability of the Lenel ACS, including quarterly preventative maintenance, replacement of compatible hardware and software components, and a comprehensive software upgrade and support plan with annual updates, firmware patches, and hot fixes as issued by Lenel. The contractor must be a Value Authorized Reseller of Lenel products and must comply with stringent site access, security, and personnel requirements, including proper identification badges, English language proficiency, and adherence to Air Force installation access protocols as outlined in AFFARS 5352.242-9000. All services must be performed at the designated location in Building 351 at Eglin AFB, with payment processed exclusively through the Wide Area WorkFlow system using specified DoDAAC codes. The solicitation requires offerors to submit detailed technical proposals demonstrating minimum salient characteristics and compliance with the Statement of Work, with technical acceptability serving as a pass/fail gate for award consideration. Evaluation will be based on best value combining technical capability and total evaluated price, with no discussions anticipated unless deemed necessary by the government. Offers must remain firm for 60 days after the submission deadline, extended through successive amendments to July 31, 2026. Mandatory FAR clauses include prohibitions on contracting with entities requiring internal confidentiality agreements, System for Award Management registration and maintenance with deviation 2026-O0038, security prohibitions and exclusions, prohibitions on inverted domestic corporations and covered defense telecommunications, and requirements for whistleblower rights and safeguarding covered defense information. Additionally, the contract incorporates a clause permitting optional service extensions by the government without renegotiation. Offerors must maintain active SAM registration, submit required representations regarding former DoD officials and business operations, and ensure all personnel meet appearance and badge requirements. The contractor assumes

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Security Fence and Base Entrances Tyndall AFB

Solicitation # FA481926R0039

The 325th Contracting Squadron is preparing to issue a solicitation for a Firm-Fixed-Price contract to modify existing vehicle barriers and install new fencing at Tyndall Air Force Base in Florida. The work requires comprehensive labor, materials, equipment, and supervision to meet detailed specifications and drawings yet to be released, with an anticipated performance period of 100 calendar days beginning upon issuance of the Notice to Proceed. This procurement is set aside exclusively for small businesses under NAICS code 238990, with all interested vendors required to maintain an active registration in the System for Award Management prior to submission. The solicitation number is FA481926R0039, and proposals must be submitted no later than August 14, 2026, with the presolicitation notice posted on July 30, 2026. Primary point of contact for inquiries is SrA Alan Lopez, reachable via email or phone, with Koby Trotter listed as a secondary contact.

All Other Specialty Trade Contractors

POSTED

DEADLINE