Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

TEE, BOSS

Active
SPE7M2-27-T-0437Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0437, is a small business set-aside for the procurement of 16 units of TEE, BOSS (NSN 4730009290596). The contract requires the items to be delivered to DLA Dist San Joaquin in Tracy, California, with a need ship date of April 26, 2027, and an original required delivery date of June 21, 2027. The delivery lead time is specified as 167 days after the order is placed, with shipping terms set as FOB Destination Other. The procurement is subject to rigorous technical and quality standards, including DLA packaging requirements (RP001), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. The items are designated as critical application items and must be manufactured or assembled by accredited manufacturers listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL). Additionally, the contract prohibits the use of ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized cases. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. Offerors must provide necessary representations and certifications, including their small business status and UEI/CAGE codes. The government may apply a price evaluation preference for HUBZone concerns. Quotations are due by November 9, 2026, and should be submitted to the DLA Weapons Support Nuclear Reactor Program in Columbus, Ohio.

General Info

Small business set-aside for 16 TEE, BOSS units for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1

RFQ SPE7M2-27-T-0437

PDF, High priority: read this first19 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM
Office AddressUSA
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TEE,BOSS
TEE, BOSS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS 3 THREADS APPLY TO THIS NSN.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SPE7M2-27-T-0437
SECTION B
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS5192 REVISION NR F DTD 08/01/2021 PART PIECE NUMBER: AS5192K08
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS4875 REVISION NR B DTD 03/01/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018911595 0001 EA 16.000
NSN/MATERIAL:4730009290596
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:EC INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BAGS SHALL BE FABRICATED FROM TYPE 1, 2, OR 3, CLASS B, STYLE 1, OR TYPE 1 OR 2, CLASS C,STYLE 1, I/A/W MIL-B-117
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M2-27-T-0437
SECTION B
PR: 7018911595 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:04/26/2027 Original Required Delivery Date:06/21/2027
SPE7M2-27-T-0437 NSN/Part Number: 4730-00-929-0596 Quantity: 16 EA Purchase Request: 7018911595QTY: 16 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Fueling Manifold Manufacturing and SupplyThis subcontract involves the manufacture and supply of two fueling manifolds for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for producing or procuring General Electric part number L21783G01, which is classified as a critical application item. All deliverables must strictly adhere to GE and DLA technical specifications, with a specific prohibition on the use of mercury-containing compounds and unauthorized additive manufacturing. The project is managed under the Department of Defense and requires the contractor to complete a CMMC Level 2 self-assessment. Performance will take place in Tracy, California, under NAICS code 332996. Interested parties must respond by November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
Nut Assembly (Tube Coupler) SupplyThis subcontract involves the manufacture or sourcing of 16 units of the Nut Assembly, Tube Coupler, identified by NSN 4730012461366. The items must be produced in accordance with TDP Rev A Gen 1 and delivered to the DLA Weapons Support Fluid Handling Division. Compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling is mandatory. The contract is managed under NAICS code 332996 with performance taking place in Jacksonville. To be eligible for this award, contractors must maintain active registrations in both SAM and WAWF. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Supply of Sediment Strainers (NSN 4730001257948)This subcontract involves the manufacture or procurement of two sediment strainers meeting NSN 4730001257948 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all units are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 332996 and is managed by the Department of Defense. Performance will take place in Jacksonville, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Steel Pipe Nipple SupplierThis subcontract involves the supply of steel pipe nipples for prime contractors fulfilling DLA supply contracts under the Department of Defense. The required components are 1/4 inch nominal pipe size with a 1-1/2 inch nominal leg length, manufactured in accordance with ASTM A733 specifications. All items must be delivered with a Certificate of Conformance per FAR 52.246-15 and must strictly adhere to the Buy American Act and Berry Amendment. Logistical requirements specify that packaging must follow ASTM D3951 and RP001 standards, with labeling compliant with MIL-STD-129. The specific item requested is NSN 4730010909148, with performance taking place in El Paso. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Supply of Tube Fitting Inserts (NSN 4730010526281)This subcontract involves the manufacture or sourcing of 302 tube fitting inserts under NSN 4730010526281 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for ensuring all units are packaged and marked according to MIL-STD-2073-1E, RP001, and MIL-STD-129, while maintaining quality control standards per RA001. Performance will take place in Tracy, California. The agreement mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regulations. Notably, the use of additive manufacturing is prohibited for the production of these components. The final deliverable consists of 302 individually packaged and marked units delivered to the prime contractor for ultimate delivery to the Department of Defense.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Precision Metal Tube Assembly FabricatorThis subcontract for the DLA Weapons Support Land Supply Chain involves the precision fabrication of three Metal Tube Assemblies. The selected contractor will be responsible for the machining, forming, and assembly of aluminum tubing, specifically executing precision cutting and bending in accordance with Pratt & Whitney Canada Corp part number 3014948. The project requires strict adherence to military standards, including MIL-STD-1916 or ASQ H1331 for sampling, MIL-STD-129 for marking, and MIL-STD-2073-1E/DLA RP001 for packaging. Performance will take place in Cherry Point, and the response deadline for this opportunity is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Supply of High-Capacity Female Quick Disconnect Coupling HalvesThis subcontract involves the manufacture and supply of high-capacity female quick disconnect coupling halves for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The required components must feature brass bodies with ASTM A313 stainless steel springs and 1/4 inch ID nominal size barbed hose ends, adhering strictly to Basic CID A-A-59439B, Revision B. All deliverables must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, with delivery terms set as FOB Origin. The project is managed under NAICS code 332996 for the Department of Defense, with the place of performance located in Fort Worth, Texas. Interested parties should note the response deadline of November 9, 2026, for this procurement effort.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CONNECTOR, MULTIPLE, FLU
Solicitation # SPE7M0-27-T-0836
Solicitation SPE7M0-27-T-0836, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is a request for quotations for the procurement of multiple fluid pressure line connectors. The required items are identified by NSN 4730-01-474-9295 and are specified as John Deere Construction and Forestry part number 4208911. The procurement consists of two line items, each for a quantity of one unit, with delivery required within five days after order. Delivery locations are specified for Fort Benning, Georgia, and Cortlandt Manor, New York, with shipping terms set as FOB Origin. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and ASTM D3951, with DLA Master List technical and quality requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must submit their quotes via the DIBBS portal by November 9, 2026, and must comply with various federal regulations, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and hazardous material labeling standards.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNECT
Solicitation # SPE7M2-27-T-0503
Solicitation SPE7M2-27-T-0503 is a small business set-aside procurement issued by the Defense Logistics Agency (DLA) for 486 units of quick disconnect plugs. The required items are identified by NSN 4730010612583 and correspond to Boeing part number 265-0529-001 or Tylok International part number SS-4-DF. Delivery is required within 167 days after the order, with a need ship date of April 26, 2027, and a final required delivery date of June 25, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the DLA Master List of Technical and Quality Requirements. Special restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds and a ban on the use of additive manufacturing unless specifically authorized. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with DFARS regulations regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CAP, PIPE
Solicitation # SPE7M2-27-T-0513
Solicitation SPE7M2-27-T-0513 is a request for the procurement of 424 units of pipe caps, identified by NSN 4730-00-595-1278 and part piece number M1183/2-08S. The items are to be manufactured using a metal casting process, which requires specific tooling. The contract is issued by the Defense Logistics Agency (DLA) for the Weapons Support Nuclear Reactor Program and is designated as a total small business set-aside under FAR 19.5. Delivery is required within 167 days after order, with a need ship date of April 26, 2027, and shipping is established as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requires adherence to several technical standards, including MIL-DTL-1183/2A(1), MIL-DTL-1183K(2) SUP 1, and QAP 16236 SQAP-4730-0003. Suppliers must provide a Certificate of Quality Compliance (COQC) for each manufacturing lot, submitted electronically via the iRAPT system. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous or radioactive materials. The contract incorporates key federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and destination inspection under FAR 52.246-2. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PIPE
Solicitation # SPE7M2-27-T-0419
Solicitation SPE7M2-27-T-0419 is a small business set-aside issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 593 straight pipe-to-tube adapters. The items are specified as 1/4 inch CRES with a 1/2 inch NPT outer tube size and are designated as critical application items. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 26, 2027, and an original required delivery date of June 25, 2027. Delivery terms are FOB Origin, and the lead time is 167 days after the order is placed. The procurement is governed by several technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-B-117 for bag fabrication. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PIPE
Solicitation # SPE7M3-27-T-0752
Solicitation SPE7M3-27-T-0752 is a fixed-price, small business set-aside contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of two straight pipe-to-hose adapters. The required items are identified by NSN 4730013466227, with compatible manufacturer part numbers from Gates Corporation listed as 4-8MPX or 7302-0918-5. The original required delivery date is October 23, 2026, with a delivery window of 10 days after the award. Delivery is FOB Origin, and the shipping destination is the US Army SSA ASG Balkans at Camp Bondsteel in Ferizaj, XK. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific palletization requirements per DLA standard RP001. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity and hazardous material labeling standards. Offers involving additive manufacturing are ineligible for award, and the response deadline for quotations is November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 334417
New
DIBBS
Supply of Electrical Plug Connectors (MS3476W14-18S)This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the supply of 124 electrical plug connectors, part number MS3476W14-18S. These components are designated as critical application items and must be delivered to San Diego within 14 days of the contract award. The contractor is required to adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, CAGE code registration is mandatory for these Qualified Products List items. The procurement falls under NAICS code 334417 and supports prime contractors fulfilling DLA supply contracts.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
Supply of Collar Assembly, Valve (NSN 4820-01-362-5883)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of eight Valve Collar Assemblies, identified by NSN 4820-01-362-5883. The contractor must ensure all units meet strict technical specifications, specifically excluding the use of additive manufacturing processes. Compliance with MIL-STD 129 for marking and RP001 for DLA packaging is mandatory for all deliverables. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Supply of Spring Tension WashersThis subcontract involves the manufacture or sourcing of 2,431 spring tension washers for the Department of Defense, specifically supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for ensuring all units meet strict government specifications and must prepare the items for Government-Arranged Transportation under the First Destination Transportation program. Performance will take place at Hill AFB. Interested parties must be registered in SAM.gov to be eligible for this requirement. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026. The contract falls under NAICS code 332510 and requires the delivery of all units by the specified required delivery date.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The contractor is responsible for providing military-grade packaging, preservation, and marking for prime contractors fulfilling DLA supply contracts. All work must be performed at Hill AFB and adhere strictly to MIL-STD-2073-1E and MIL-STD-129 standards, specifically utilizing Preservation Method 10 and Cleaning/Drying 1. The scope of work requires the use of A1 unit containers and D3 intermediate containers, with a strict requirement that no mercury compounds are used. The final deliverable consists of finished, marked shipments prepared for FOB Origin delivery to DLA Distribution depots. This opportunity falls under NAICS code 488510, with a response deadline set for November 9, 2026.
Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
Manufacturing of QPL Electrical Connector Covers (NSN 5935002218620)This subcontract involves the manufacturing of 1,187 electrical connector covers for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating the covers using precision molding or machining in strict accordance with SAE AS25043 and AS50151 standards. A critical requirement of the project is the absolute prohibition of mercury compounds in the manufacturing process. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the contractor must hold QPL certification for NSN 5935002218620. The work is associated with NAICS code 334418 and will be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
MIL-SPEC Packaging and Fulfillment for Aerospace PartsThis subcontract involves providing specialized military packaging and fulfillment services for aerospace parts supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work requires sealing components in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1 to protect against UV deterioration. Additionally, the contractor is responsible for executing all marking and palletization tasks following MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverables consist of shipment-ready hardware delivered to DLA Distribution DDSP New Cumberland. This project falls under NAICS code 333618 and is managed under the Department of Defense. Interested parties should note the response deadline of November 9, 2026.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Manufacture of Packing with Retainer (P/N [phone hidden])This subcontract involves the precision manufacture of 29 Packing with Retainer assemblies for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The components must be machined to meet Honeywell Aerospace part number [phone hidden] and NSN 5330-01-721-8818 specifications. Performance will take place in New Cumberland, Pennsylvania. Strict adherence to quality and safety standards is required, specifically compliance with RA001 quality requirements for Critical Application Items and NAVSEA 5100-003D mercury-free mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing and Supply of Mounting Brackets (NSN 5340-01-723-0174)This subcontract involves the manufacturing and supply of 13 mounting brackets under NSN 5340-01-723-0174 for the DLA Weapons Support Nuclear Reactor Program. The selected provider must fabricate the components according to specific technical data and ensure full compliance with RA001 quality requirements, as well as sourcing mandates established by the Buy American Act and the Berry Amendment. Finished products must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Due to the sensitive nature of the program, the contractor is required to maintain CMMC Level 2 certification and hold valid ITAR and EAR authorizations. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332710. Interested parties must submit their responses by November 9, 2026.
Machine Shops

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
Electrical Insulation Sleeving SupplierThis subcontract opportunity is for the supply of specialized electrical insulation sleeving to support prime contractors under the DLA Weapons Support Nuclear Reactor Program. The required materials include NSN 5970-01-445-3969, specifically Part Nos TE Connectivity EC8043-000 or Tyco Electronics HS095WE1NF044B. All supplies must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-PRF 23199 standards, while remaining mercury-free and compliant with the Buy American Act. The scope of work involves the delivery of two boxes of sleeving with a minimum shelf life of 60 months. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026, in accordance with the guidelines set by the Department of Defense.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423430
New
DIBBS
Supply of Keypad (NSN 5805016838644)This subcontract involves the supply of nine keypad hardware units, identified by NSN 5805016838644, to prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The agreement mandates strict adherence to military standards, specifically requiring marking per MIL-STD-129 and packaging and palletization according to RP001 DLA Packaging Requirements. Additionally, any applicable hazardous material labeling must comply with 29 CFR 1910.1200. The contract is categorized under NAICS code 423430 and specifies that delivery of the nine units will be handled as FOB Origin. Performance is associated with Tracy, California, and the procurement process is managed through the Department of Defense.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military Standard Packaging and Marking Provider
Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423430
New
DIBBS
Automatic Data Processing Printer Supplier
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS