Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TEE, PIPE

Active
SPE7M2-26-Q-0731Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits a copper alloy socket type Tee fitting with a nominal pipe size of 1 inch, to be manufactured using a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and must be delivered within 100 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement type. Full and open competition is authorized under a Total Small Business Set-Aside, restricted to small businesses. The product must comply with strict environmental controls prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for specific exempted uses such as batteries, fluorescent lamps, sensors, and authorized chemical reagents, with portable mercury-containing devices requiring shock-resistant design and secondary containment per NAVSEA 5100-003D. The supplier is required to furnish a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and must provide one physical copy with each delivery while uploading an electronic version to the iRAPT system via the Receiving Report attachment tab. For contracts subject to Government inspection at source, the COQC must be available for review by the Government representative upon presentation of material for acceptance, enabling electronic sign-off on the WAWF receiving report if documentation is correctly uploaded. All data and documentation required under the contract are to be included in the item’s price. The solicitation is managed by the Department of Defense’s Nuclear Reactor Program, with performance delivery expected at New Cumberland, Pennsylvania, and inquiries directed to Alla Yakover at DLA. Technical, tooling, and sourcing assistance should be coordinated through the designated Aviation or Land and Maritime Supply Chain channels.

General Info

Copper alloy 1-inch tee fitting, 385 units, small business set-aside, delivered in 100 days, no mercury except exempted uses.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7M2-26-Q-0731.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alla Yakover
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TEE, PIPE
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. COPPER ALLOY, SOCKET TYPE 1 IN.NOMINAL PIPE SIZE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
A. Data required by this document will be included in the price of the procured item(s).
B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).
C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.
SPE7M2-26-Q-0731
SECTION B
SUPPLY/SERVICE: 4730-00-542-5250 CONT'D
D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). NSN/Part Number: 4730-00-542-5250 Quantity: 385 EA Purchase Request: 7017441718QTY: 385 Delivery: 100 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
VALVE,DE ICING
Solicitation # N0010426QJC09
This contract pertains to the repair of the VALVE, DE ICING under solicitation N0010426QJC09, with a required Repair Turnaround Time (RTAT) of 107 days measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The contract mandates strict adherence to technical specifications, including compliance with MIL-STD-130 Rev N for marking and the use of approved repair standards, drawings, and technical orders referenced by CAGE code 1N8S8 and part numbers 0-300-257-01 and 0-001-110-01-FIND NO 3. All repairs must meet or exceed original manufacturer requirements, and no design, material, or part number substitutions are permitted without prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific Code designations. The contracting vehicle is a firm-fixed-price arrangement with FOB Origin freight terms, and the Government retains the right to conduct inspections and enforce quality control through its own means if necessary. Records of all inspections and testing must be maintained for 365 days post-final delivery. The contract includes a mandatory Option for Increased Quantity allowing the Government to extend the order for up to 365 days post-award at the originally quoted unit price. Failure to meet the RTAT results in a predetermined price reduction per unit per month, with a specified maximum cap, though excusable delays such as Government-caused delays are exempt. A Repair Turnaround Time compliance statement must accompany each quote, along with any capacity constraints if the contractor cannot meet the 107-day requirement. Pricing must be supported by historical data or comparable commercial invoices, and contractors must compare their repair price to the cost of purchasing a new unit. The Government requires Government Source Inspection and adherence to Buy American and other trade agreement certifications. Only authorized distributors of the original manufacturer may submit bids, with proof of authorization required on company letterhead signed by an official. All documents provided by the Navy include distribution statements limiting access per OPNAVINST 5510.1, and compliance with security prohibitions, workforce reporting via WFP Mod Assist, and the mandatory use of Wide Area Workflow payment instructions are contractually required. Any asset deemed beyond repair incurs a negotiated T&E fee not to exceed a specified amount. The award will be issued bilaterally, requiring contractor acceptance before execution.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
Federal
47--FAIRING NOZZLE
Solicitation # SPRPA126RYC78
The contract pertains to the procurement of 31 units of a fairing nozzle designated by NSN 0R-4730-017091524-B8 and reference number 5142T40G01, with delivery terms set at FOB origin. This item is classified as a Critical Application Item, indicating its essential role in mission-critical systems where failure could lead to severe operational consequences. The government lacks sufficient, accurate, or legible data to source this part from any source other than the current contractor, necessitating sole-source procurement. The solicitation, issued under SPRPA126RYC78, was posted on July 23, 2026, with responses due by August 17, 2026, and is classified as a presolicitation. The contracting activity is managed by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. Primary point of contact for inquiries is Kenneth Lauber, with contact information provided including email, phone, and fax. No set-aside type or NAICS code is specified, and performance location data remains incomplete.
Pa DLA Aviation At Philadelphia

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
Federal
ELBOW,REDUCING
Solicitation # N0010426QBH83
The contract solicitation N0010426QBH83 for a reducing elbow is issued by the Naval Supply Systems Command Weapon Systems Support Mechanics under the Department of Defense, with a mandatory submission deadline of June 19, 2026. All offers must be submitted prior to close of business on that date, and pricing remains valid for 60 days after the closing date unless otherwise specified. The procurement is a total small business set-aside, and vendors must comply with stringent quality, inspection, and documentation requirements detailed in the Individual Repair Part Ordering Data (IRPOD), which is mandatory to review via the BPMI e-Commerce portal. Technical compliance requires strict adherence to specified revisions of drawings, specifications, and standards cited in the IRPOD, with any deviations or waivers needing prior written approval from the Contracting Officer and supporting technical justification to ensure no impact on form, fit, function, or quality. The contract mandates use of the Workflow Pro (WFP) Mod Assist Module and requires all submittals such as test reports and pre-manufacturing procedures to be submitted via WAWF or approved electronic methods to designated points of contact. Inspection and acceptance are governed by the IRPOD and specified inspection codes, with final acceptance occurring at the destination. Packaging must meet MIL-PRF-23199 standards for cleanliness-controlled items, and the use of mercury or mercury-containing compounds is strictly prohibited. All technical data, including drawings and specifications, are marked NOFORN and subject to export controls requiring prior Navy approval for any release to foreign nationals. The contract further requires full compliance with cybersecurity maturity certification, veteran and disability equal opportunity mandates, and federal transportation and payment guidelines, with all contractual documents deemed issued upon electronic transmission. A separate submission of documentation is required for each unique contract line item, with initial procedural packages due 45 days after award and final inspection reports due at contract end.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND46
This contract pertains to the procurement of a Compartment Salvage Ball Valve and associated components for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The material is designated as SPECIAL EMPHASIS Level I, requiring strict quality controls, full traceability, and comprehensive certification. The contractor must supply components per Drawing 4558706 and related specifications, including specific parts such as the Deck Fitting Nipple and Cap Assembly identified by NSNs 1H 4730-01-671-3260L1 and 1H 4730-01-210-6118L1. Material requirements are rigorous, mandating exact metallurgical compositions including QQ-N-281, ASTM-B150, SAE AMS 6931, and MIL-T-16420, with precise mechanical and chemical testing protocols. Traceability is mandatory from raw material through final assembly, with unique heat/lot markings on all components and certification documentation directly linked to each part. All metallic materials require quantitative chemical and mechanical analysis, and non-metallic components like seats must meet exact hardness, tensile, and water absorption thresholds with manufacturer-specific approval. Welding, brazing, and fastener fabrication are tightly regulated, requiring approved procedures, qualified personnel, and submission of qualification data prior to production. Fasteners must comply with MIL-DTL-1222 and NASM standards, with prohibited use of molybdenum disulfide lubricants and mandatory use of A-A-59004 anti-galling compound. No internal threads may be cold-formed; all must be cut. All certifications must be positive, unqualified, and legible, with no disclaimers permitted. Non-conforming materials will be rejected, and all inspections must follow zero-defect acceptance criteria for lot samples. The contractor must maintain an ISO-9001 compliant quality system with calibration adherence to ISO-10012 or ANSI-Z540.3, and government inspection is authorized at source. Subcontractors are bound by the same requirements and require explicit oversight. Packaging, preservation, and marking follow MIL-STD-2073, and all items must bear the designated CID T884305725. The contract invokes emergency acquisition flexibilities and is certified under the Defense Priorities and Allocations
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ACTUATOR,ELECTRO-ME
Solicitation # SPRMM126QHE40
This procurement solicitation under SPRMM126QHE40 seeks the manufacture and delivery of an ACTUATOR,ELECTRO-ME in accordance with strict military specifications, emphasizing conformity to Cage Code 98032 and reference number 993015-1. The item must comply with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, with all quality assurance responsibilities resting solely on the contractor, who must maintain inspection records for 365 days post-final delivery. Technical data and drawings are not provided, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitutions categorized under six defined codifications. The solicitation mandates that only authorized distributors of the original equipment manufacturer may submit offers, requiring formal proof of authorization on company letterhead. Compliance with mandatory clauses including E06 Inspection and Acceptance at Source, cybersecurity maturity certification, and the use of PIEE-WAWF for electronic invoice and receiving report submission is required. The contract stipulates that all documents issued via email, fax, or electronic means are considered officially issued upon transmission, and award will be made using the Lowest Price Technically Acceptable evaluation method under emergency acquisition flexibilities. Delivery is subject to undisclosed timelines, and quotes must be submitted electronically via EDI with any exceptions explicitly noted or confirmed in writing; failure to do so results in award based strictly on solicitation terms. Contractors must provide their CAGE code, OEM details if not the manufacturer, and a valid email for correspondence. Notification registration through NAVSUP WSS and registration on the PIEE EDA portal are strongly recommended to monitor contract actions. The government reserves full inspection rights at the source and final acceptance location, both to be identified by CAGE code and address. Performance is restricted to the production facility stipulated in the contract unless a formal written request, accompanied by a $250 administrative cost reduction, is approved. All applicable DOD documents referenced must be obtained through official sources, with special handling required for NOFORN and classified materials, and distribution of Navy-provided technical data must align with designated Distribution Statements. Failure to meet any of these stringent conditions may result in disqualification or rejection of the offer.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND63
This contract pertains to the procurement of a 1 1/2 inch ball valve designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for critical shipboard systems, where failure could lead to catastrophic consequences including loss of life or vessel. The valve must conform strictly to Naval Ship Systems Command Drawing 845-4558773 and related assembly drawings, with specific material requirements including ASTM-B369 for the body, MIL-C-15726 for the bonnet, QQ-N-286 for the stem, and SAE-AMS-6931 for the ball. Alternative materials such as Aluminum Alloy 356.0-T6 for the handwheel are permitted under defined conditions. Rigorous testing and certification protocols are mandated, including liquid penetrant inspection, ultrasonic testing, pressure tests, slow strain rate tensile tests, and weldability evaluations, with mandatory compliance to military and industry standards such as MIL-STD-792, FED-STD-H28, and ISO-9001. Traceability is strictly enforced from raw material through to finished component via unique heat-lot markings, requiring permanent, legible identification on all parts and full documentation of chemical and mechanical properties. All certifications must be positive, unqualified, and directly linked to the physical item via traceability numbers, with transcription strictly prohibited. The contractor must operate under a certified quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, and is subject to Government Quality Assurance at source with mandatory coordination with the Defense Contract Management Agency. Welding and brazing must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with prior approval of procedures and qualification data required, and repair welding is explicitly forbidden on QQ-N-286 material. Thread lubricants containing molybdenum disulfide are prohibited; A-A-59004 anti-galling compound must be used instead. Surface finish requirements for the ball are detailed, specifying polishing techniques using SUPFINA paste to achieve a matte dull finish between RHR 12–16, and seal surface waviness must not exceed 0.0005 inches per inch of spherical surface. All fasteners must be marked
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QND36
This contract is for the manufacture of valve stems designated as SPECIAL EMPHASIS Material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic outcomes including loss of life or the vessel itself. The stems must conform precisely to NAVSEA drawing 803-5959296 and associated engineering documents, utilizing EB Specification 4581 material that is heat-traceable throughout production. Strict requirements govern material traceability, requiring permanent markings on each stem including the seller’s name, government ready-for-issue tag serial number, and heat number, applied in accordance with MIL-STD-792. All materials must be accompanied by certified test reports verifying chemical composition and mechanical properties, with electronic signatures accepted as valid under controlled processes. Re-certification is required whenever processing alters material properties, and all certifications must be 100% verified for completeness, legibility, and compliance. Quality assurance is rigorously enforced with mandatory adherence to ISO-9001, ISO-10012, and ISO/IEC 17025, or as an alternative, MIL-I-45208 and MIL-STD-45662. Welding and brazing, where applicable, require prior approval of procedures and qualification records, submitted electronically in Adobe PDF format, with specific attention to hardfacing, titanium welding, and filler metal traceability. Non-destructive testing, including dye penetrant inspection per T9074-AS-GIB-010/271 and MIL-STD-2035 acceptance, is mandatory. Every shipment requires submission of certification documentation via WAWF to Portsmouth Naval Shipyard, with ship-to, inspect-by, and accept-by codes designated and prior written acceptance required before shipment. The contractor must maintain documented quality systems subject to government audit, control all subcontractors to ensure compliance, and implement stringent material handling procedures to prevent commingling or loss of traceability from raw stock through final assembly. All waivers, deviations, and engineering change proposals must be submitted for prior approval by the Contracting Officer and follow specific classification and documentation protocols. The contract is issued under Emergency Acquisition Flexibilities, is DX-rated for national defense priority, and includes Buy American and small business set-aside provisions, with full compliance expected under a strict zero-defect acceptance standard for final inspection.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE ASSEMBLY,MANI
Solicitation # N0010423QBV46
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332919
New
Federal
VLV,FLOW CONT 1-1/2
Solicitation # N0010426QBH89
The contract solicitation for a VLV FLOW CONT 1-1/2 under solicitation number N0010426QBH89 is issued by the Naval Supply Systems Command Weapon Systems Support Mechanical office in Mechanicsburg, Pennsylvania, with a closing date of June 19, 2026. It mandates strict adherence to technical and quality requirements defined in the Individual Repair Part Ordering Data (IRPOD), which serves as the primary governing document, superseding other contract sections in case of conflict. Contractors must comply with specified revisions of referenced drawings, specifications, and standards dated November 1, 1969 or later, and must use entire document revisions unless prior written approval is obtained for deviations. Mandatory compliance includes the absence of mercury or mercury-containing compounds, specific packaging standards under MIL-PRF-23199 requiring heat-sealed envelopes for cleanliness-controlled parts, and full implementation of the inspection system program as outlined in the IRPOD, with all inspection records retained for government review. All submissions must follow strict formatting and procedural protocols, including pre-manufacturing procedure packages due 45 days after contract award and certified test and inspection reports due at end of contract, both submitted separately per unique contract, NSN, and item nomenclature combinations using designated NAVSUP-WSS DD Form 1423 sequences DI-QCIC-8871 and DI-QCIC-8872. Pricing is valid for 60 days post-closing unless otherwise specified, and vendors must register on the BPMI e-Commerce portal to access required technical documents. The contract requires use of Wide Area Workflow for invoice and receiving reporting, and adherence to cybersecurity maturity certification, small business set-aside status, and national defense priority ratings. Delivery terms are FOB destination, with shipping authorization strictly controlled by the post-award contracting officer. Submission of technical data packages through WAWF or approved electronic means is recommended, and all communications must comply with distribution statement codes and security protocols to prevent unauthorized disclosure.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
SEAT,VALVE
Solicitation # N0010426QND47
This contract pertains to the procurement of a seat for a 1-inch ball valve, designated as Special Emphasis Level I material due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to Naval Sea Systems Command Drawing 803-5001003 and related specifications, with material requirements mandating Teflon (polytetrafluoroethylene) meeting ASTM-D4894 Type II and IV Grade 1 and 2, including specific tensile strength, elongation, melting point, specific gravity, hardness, and water absorption limits. Traceability is mandatory from raw material through production to final assembly, requiring unique heat, lot, or batch markings on each seat that directly link to certified test data. All materials must be mercury-free, and any non-metallic components must satisfy NAVSEA SS800-AG-MAN-010/P-9290 toxicity and flammability standards. Quality assurance is stringent and governed by ISO-9001, ISO-10012, and ISO/IEC 17025, with mandatory government inspection at the contractor’s facility and the right to audit subcontractors. The contractor must maintain comprehensive documentation of all inspections, test results, and nonconformances, and submit a Certificate of Compliance for each shipment that confirms adherence to all contractual requirements and includes traceability to the physical marking on each item. Certification data must be submitted through Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with no material permitted to ship without formal acceptance. Waivers and deviations require prior written approval from the Contracting Officer with classification as Critical, Major, or Minor, and must be routed via email with full justification. The contract also enforces Buy American Act compliance, mandatory small business subcontracting plans, and applies emergency acquisition flexibilities, with all contractual documents deemed issued upon electronic transmission. Final delivery is subject to DoD prioritization under DPAS, classified as DX, and all data handling and document distribution must comply with strict Navy security protocols.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QND17
This contract pertains to the refurbishment and supply of specialized ball valve components for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The material is designated as Special Emphasis Level I, mandating strict quality controls, traceability, and inspection protocols throughout all manufacturing and repair processes. All components, including valve balls and seats, must conform to precise dimensional, material, and surface finish requirements outlined in referenced naval drawings and specifications such as SAE AMS 6931, ASTM B367, and MIL-STD-792. Ball surfaces must achieve a specific roughness and waviness standard, with final polishing performed using designated materials and procedures, and all traceability marking must be permanently applied per MIL-STD-792, with unique identifiers linking each part to its chemical and mechanical certification data. Seats made of Delrin must meet exact physical property thresholds including specific gravity, tensile strength, and Teflon fiber content, with strict limits on inclusions and dimensional stability under high-temperature testing. Any nonconforming material must be dispositioned and replacement parts cannot be newly manufactured under this contract. The contractor is required to maintain a certified quality system compliant with ISO-9001 and ISO-10012 or as an alternative MIL-I-45208 and MIL-STD-45662, subject to government audit and source inspection by DCMA at any facility involved in production or subcontracting. All certifications for material, welding, nondestructive testing, and final inspection must be 100% verifiable, documented, and submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with no material allowed to be shipped without formal acceptance. Welding and brazing procedures must be pre-approved and submitted electronically, with qualification records and certificates of compliance for filler metals included. Traceability from raw material through every process step to finished component is mandatory, requiring permanent marking on parts or durable tags where surface space is insufficient. Any waiver or deviation—classified as Critical, Major, or Minor—requires prior written approval from the Contracting Officer and must include impact assessments and corrective action plans. The contractor must also comply with Buy American Act requirements, Mercury Free restrictions, and security prohibitions, while ensuring all subcontractors adhere to the same rigorous standards and documentation requirements. Final acceptance is contingent on zero-defect lot sampling, full documentation review, and validation against all invoked specifications, with government representatives maintaining
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QFD87
This contract pertains to the repair and refurbishment of a ball valve parts kit designated as SPECIAL EMPHASIS material due to its critical role in a shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel. The work requires complete disassembly, inspection, and restoration of the valve to "like new" or "A" condition, with strict adherence to drawing 4457329 and referenced specifications including SAE AMS 6931 for the ball component and MD71-GG Mearthane for the seals, which must be manufactured by a specified vendor. All materials must be traceable from raw stock to final assembly through permanent markings and certified test reports, with chemical and mechanical analyses required for compliance. Traceability is maintained throughout every stage using heat-lot numbers and unique identifiers, and any deviation or waiver—classified as Critical, Major, or Minor—requires formal approval from the Contracting Officer through the ECDS system. The contract mandates full compliance with ISO-9001, ISO-10012, and either MIL-I-45208 or MIL-STD-45662 quality systems, with rigorous documentation controls for welding, brazing, and non-destructive testing. All weld procedures and qualifications must be pre-approved and submitted in electronic format, and filler metal certifications must include lot numbers and verification of conformity. Final inspection requires 100% verification of certification documents, traceability markings, and material compliance, with zero defect acceptance criteria for inspections. Delivery is subject to a maximum 365-day timeline from contract effective date, and shipments cannot proceed without prior WAWF certification review by Portsmouth Naval Shipyard using DODAAC N50286. The item is a DO-rated order under the Defense Priorities and Allocations System, and the contract is issued under Emergency Acquisition Flexibilities, with a small business set-aside and Buy American requirements enforced. All data submissions, including certificates of compliance, must be transmitted through WAWF with specific routing to N39040 and notification to designated Navy email addresses.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 336413
New
DIBBS
HINGE LEAF JBD PANE
Solicitation # SPE7M2-26-T-6069
The hinge leaf JBD pane, identified by NSN 1720-01-655-9513 and quantity of three units, is subject to strict export control under either ITAR or EAR, meaning its technical data cannot be disclosed or transferred to foreign persons regardless of location without prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies and is enforced under DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The procurement is part of solicitation SPE7M2-26-T-6069 issued by the Department of Defense’s Nuclear Reactor Program, with a response deadline of August 17, 2026, and an expected delivery timeframe of 168 days after order. The place of performance is specified as New Cumberland, Pennsylvania, with Alisha Blanton listed as the primary point of contact for inquiries.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-Q-0729
The contract pertains to a PUSH SWITCH identified by NSN 5930-01-316-7681, with a quantity of 32 units, under purchase request 7017436985, and a delivery requirement of 141 days after award. The item is classified as non-CAI and non-CSI, and includes technical data subject to U.S. export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior government authorization. Distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program status, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA. The DFARS clause 252.225-7048 governs the handling and protection of this technical data, and all contractors subject to this contract must comply with stringent access and dissemination controls. The solicitation number is SPE7M2-26-Q-0729, posted on August 7, 2026, with responses due by August 12, 2026, under a Total Small Business Set-Aside as defined by FAR 19.5. The procuring agency is the Nuclear Reactor Program within the Department of Defense, with performance located in San Diego, California, and the primary point of contact is Victoria Payne, reachable via email and phone.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0730
The contract specifies the procurement of 167 fixed bushing nuts with sleeves, identified by NSN 5310-00-916-7522, designed as a commercial item meeting military or approved consensus standards. The nut size is #6(.138")-32 UNC-2B with a self-locking threaded insert made of polytetrafluoroethylene, while the overall body is constructed from aluminum alloy 2024 and cadmium plated for corrosion resistance. The item must comply with MIL-STD-130N for identification marking and adhere strictly to the current revision of the applicable part standard, with prior revisions still acceptable for previously manufactured units. Packaging must follow DLA procurement requirements and all hardware is subject to quality conformance inspections. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item, except for specific exemptions like functional components in batteries, instruments, or weapon systems regulated by NAVSEA, which must include secondary containment and shockproofing. The contract is a total small business set-aside under solicitation SPE7M2-26-Q-0730 with a response deadline of August 14, 2026, and delivery is required within 100 days of award to Hill AFB, Utah. The procurement is overseen by the Department of Defense’s Nuclear Reactor Program, with Alla Yakover as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Quality Assurance and Inspection ServicesThis contract requires independent quality inspection services for military components to ensure compliance with MIL-STD-1916 or ASQ H1331 standards, employing acceptance quality levels of 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. The work is to be performed under a subcontract awarded by the Nuclear Reactor Program within the Department of Defense, with the place of performance specified as Chambersburg, Pennsylvania, zip code 17201-4150. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with the NAICS code 541620 indicating that the services fall under professional, scientific, and technical services related to quality control and inspection. The procurement is not subject to any specific small business set-aside and is open to qualified contractors capable of meeting stringent military-grade inspection requirements for critical defense components.
Environmental Consulting Services

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Commercial Freight Shipping (FOB Destination)The contract calls for the traceable and secure transportation of a packaged RF coil to the Letterkenny Army Depot in Pennsylvania under FOB destination terms, meaning the seller assumes all risk and cost until the item is delivered and accepted at the destination. Freight must be handled with heightened security and tracking capabilities to ensure integrity and accountability throughout the journey. Inspection of the shipment will occur upon arrival at the delivery point, and the item must meet all required specifications at that time to satisfy contractual obligations. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for local and long-distance freight services. It was posted on August 5, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense under the Nuclear Reactor Program. The place of performance is specified as Chambersburg, Pennsylvania, with a zip code of 17201-4150, indicating the origin or point of pickup for the shipment. Bidders are expected to comply with all federal transportation and security standards applicable to Defense Department cargo.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and palletization services for RF coils in full compliance with Department of Defense and Defense Logistics Agency standards, specifically adhering to MIL-STD-129, RP001, and ASTM D3951 specifications. All work must ensure secure, standardized, and traceable preparation of items for shipment to the Letterkenny Army Depot, with strict attention to military-grade durability, labeling accuracy, and pallet configuration to support logistics operations. The packaging must guarantee protection against environmental damage and facilitate automated handling during transit and storage. This subcontract is listed under NAICS code 561910 and is issued by the Department of Defense’s Nuclear Reactor Program, with performance required at the specified location in Chambersburg, Pennsylvania, zip code 17201-4150. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no set-aside provisions indicated. All bidders must demonstrate proven capability in military packaging, prior experience with DoD logistics protocols, and compliance with federal shipping standards to meet contractual obligations.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 334518
New
DIBBS
Radio Frequency Coil Supply (NSN 5950-01-238-0508)The contract requires the procurement and delivery of a single military-grade radio frequency coil identified by NSN 5950-01-238-0508, designed to meet stringent technical, quality, and packaging specifications mandated for use by the Department of Defense. The item must comply with all applicable defense standards to ensure operational readiness and compatibility within existing military systems. The solicitation is structured as a subcontract under NAICS code 334518, indicating it falls within the broader category of electromagnetic and other electronic equipment manufacturing. The contract was posted on August 5, 2026, with a firm response deadline of August 12, 2026, underscoring an accelerated procurement timeline. Performance is to be delivered to the location in Chambersburg, Pennsylvania, with a zip code of 17201-4150. The acquiring entity is the Nuclear Reactor Program within the Department of Defense, which implies the coil is intended for specialized defense applications, potentially linked to nuclear or high-reliability electronic systems. The contract is accessible via the DIBBS platform, indicating formal procurement oversight and compliance with federal acquisition protocols.
Watch, Clock, and Part Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Bar-Coding ServicesThe contract requires the provision of packaging, marking, and bar-coding services in full compliance with MIL-STD-129 standards for Department of Defense shipments. All items must be packaged utilizing Data Matrix or linear bar codes for accurate tracking, and each item must be permanently marked with identifying information at intervals of no more than three feet to ensure visibility and durability throughout the supply chain. The work is intended to support the Nuclear Reactor Program under the Department of Defense, with performance taking place at the specified location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Subcontractors must meet strict military formatting and labeling requirements to enable seamless integration into DoD logistics systems. The solicitation, categorized under NAICS code 561910 for other support activities, is open for responses with a deadline of August 17, 2026, and was posted on August 5, 2026.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires identification of all hazardous materials used in production or packaging processes and the preparation of fully compliant Safety Data Sheets (SDS) in accordance with OSHA’s 29 CFR 1910.1200 standards. All SDS documentation must be completed and submitted prior to contract award to ensure regulatory alignment and safety compliance. The work is tied to the Nuclear Reactor Program under the Department of Defense and falls under NAICS code 541690, indicating it involves other scientific and technical consulting services. Performance is localized to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. This is a subcontract opportunity, and all submissions must meet strict federal safety and documentation requirements before any award can be made.
Other Scientific and Technical Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Quality Conformance Inspection & Testing ServicesThe contract requires the performance of zero-defect sampling inspections in accordance with MIL-STD-1916 or ASQ Z1.4 standards to ensure quality conformance of delivered products or components. Inspections must be conducted meticulously to identify and eliminate defects prior to acceptance, with all findings and results documented for submission through the Contract Data Requirements List item RQ006. The work is part of a subcontract under the Nuclear Reactor Program within the Department of Defense, with performance specifically required at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 541380 indicates the nature of the services involves engineering and technical services, specifically within quality assurance and inspection. Interested parties must respond by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026, and further details available through the designated DIBBS portal.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 332410
New
DIBBS
Seamless Carbon Steel Pipe Manufacturing & SupplyThe contract mandates the manufacture and supply of seamless carbon steel pipe with a 4-inch diameter and Schedule 80 wall thickness, compliant with ASTM A106 Grade B standards. Each pipe segment must include full heat traceability, certified documentation, and permanent markings applied at intervals of exactly 3 feet to ensure quality control and traceability throughout the supply chain. The materials must meet stringent industrial specifications suitable for high-pressure and high-temperature environments, reflecting the critical nature of the end application. The delivery location is specified as New Cumberland, Pennsylvania, with the zip code 17070-5002, and the procurement is classified as a subcontract under NAICS code 332410, indicating a focus on pipe and tube manufacturing. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for qualified manufacturers to submit proposals. The contracting entity is the Nuclear Reactor Program under the Department of Defense, signaling that the pipe will be used in a defense-related nuclear application where material integrity and regulatory compliance are paramount. There is no set-aside designation, meaning the opportunity is open to all eligible subcontractors without preference for small or disadvantaged businesses. The official inquiry link is provided through the DIBBS portal, serving as the sole platform for submission and communication. All bidders must ensure full adherence to ASTM and marking requirements, as deviations will result in rejection.
Power Boiler and Heat Exchanger Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331110
New
DIBBS
Corrosion-Resistant Stainless Steel Sheet SupplyThe contract entails the supply of 105 sheets of cold-rolled, annealed, vinyl-coated stainless steel conforming to ASTM A240 Type 304 specifications, each measuring 0.0625 inches in thickness, 48 inches in width, and 96 inches in length, with an approximate weight of 83.52 pounds per sheet. The material is specified for its corrosion-resistant properties and is intended for use in environments requiring durability and purity, likely within nuclear reactor applications given the overseeing agency. All sheets must meet the detailed mechanical and chemical requirements of ASTM A240 Type 304, and the vinyl coating must provide additional protection during handling and installation without compromising the underlying stainless steel integrity. This is a total small business set-aside subcontract under the NAICS code 331110, restricted to qualified small businesses as defined by the Small Business Administration, and was posted on August 5, 2026, with responses due by August 17, 2026. The place of performance is identified as Bremerton, Washington, with a zip code of 98314-6001, indicating the location where delivery and acceptance will occur under the jurisdiction of the Department of Defense’s Nuclear Reactor Program. The solicitation is accessible via the DIBBS platform and reflects a procurement strategy focused on supporting small business participation in defense-related manufacturing contracts.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details