Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TEE, PIPE

Active
SPE7M3-26-T-7843Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of TEE, PIPE with NSN 4730015230941, requiring delivery of four units under solicitation SPE7M3-26-T-7843. The items must be delivered within 20 days to the designated military destination at USNS HECTOR A CAFFERATA (ESB-8) in San Diego, California, with FOB origin terms and no quantity variance permitted. All packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement, with precedence given to the DLA Master List of Technical and Quality Requirements over any other standard. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipment must be via traceable freight methods—parcel post is prohibited—and all items must be labeled and palletized according to specified guidelines. The unit of issue is each, with a total contract value of $16.00, and acceptance occurs at the destination point. The required delivery date is August 3, 2026, with submission deadlines and sourcing details governed by DLA procedures, and all technical and quality controls referenced through the DLA master list. Contact for inquiries is William Cain of the Fluid Handling Division, Department of Defense.

General Info

Procure four TEE, PIPE units to USNS HECTOR A CAFFERATA by August 3, 2026, FOB origin, DLA standards, no ozone-depleting chemicals.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

8511 KERNS STREET DOCK 5, SAN DIEGO, CA, 92154, US

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-7843.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TEE,PIPE
TEE,PIPE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MCMASTER-CARR SUPPLY CO 3A054 P/N 4464K141
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744401 0001 EA 4.000
NSN/MATERIAL:4730015230941
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M3-26-T-7843
SECTION B
PR: 7017744401 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N2990N
USNS HECTOR A CAFFERATA (ESB-8)
1333 ISAAC HULL AVE
8511 KERNS STREET DOCK 5
SAN DIEGO CA 92154
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N2990N
USNS HECTOR A CAFFERATA ESB-8
8511 KERNS STREET
8511 KERNS STREET DOCK 5
SAN DIEGO CA 92154
US
M/F: (TCN) N2990N6210S054
RDD: 224
PROJ: HJ5 TP 3
SUPP ADD: YNENGR SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A4A DIST: 9B ADV: FC: E2
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7M3-26-T-7843 NSN/Part Number: 4730-01-523-0941 Quantity: 4 EA Purchase Request: 7017744401QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, HOSE
Solicitation # SPE7M3-26-T-7847
The contract is for a single reducer hose component with NSN 4730-01-652-2628, solicited under SPE7M3-26-T-7847 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 10 days of award, and responses are due by August 17, 2026. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons inside or outside the United States without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle such data. The point of contact for inquiries is William Cain, reachable via email and phone provided in the contract details.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-26-T-7837
This contract specifies the procurement of 304 stainless steel pipe couplings with a 150-lb class, threaded internal 1-1/2 NPT size, designated by NSN 4730-00-194-6702 and part numbers CAMCO 1120015 and ATI LADISH 32615T3041 1-2. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to DLA’s RP001 requirements, MIL-STD-129 marking and labeling, and palletization standards, with all items delivered FOB origin in accordance with the specified unit of issue and quantity variance of exactly zero percent. Delivery is required within 20 days to the USNS HECTOR A CAFFERATA at Dock 5, 8511 Kerns Street, San Diego, CA 92154, via traceable freight—parcel post is prohibited. The contract number is SPE7M3-26-T-7837, with a required delivery date of August 3, 2026, and a unit price of $15.00 for 15 units. The contracting office is the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7840
The contract involves the procurement of five straight pipe-to-tube adapters made of stainless steel with an outer diameter of 0.375 inches, specified by part number SS600-71-4 from Swagelok, and identified by NSN 4730-01-216-4064. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must follow MIL-STD-129 markings and RP001 DLA packaging standards. The unit of issue is each, with a fixed quantity of five units and no variance allowed, priced at $5.00 per unit for a total of $25.00. Delivery is required within 20 days FOB origin to the designated military destination at Dock 5, 8511 Kerns Street, San Diego, CA 92154, with inspection and acceptance occurring at the delivery point. Shipping must be via traceable freight methods, explicitly prohibiting parcel post. Packaging must be unitized per the contract’s specified Quantity per Unit Pack, and palletization must adhere to DLA guidelines. The contract is issued under solicitation SPE7M3-26-T-7840 with a required delivery date of August 3, 2026, and the point of contact is William Cain from the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTIN
Solicitation # SPE7M3-26-T-7857
This contract specifies the procurement of 782 units of a locknut for tube fittings made from 7075-T73 aluminum alloy with a nominal tube size of 0.375 inch and 0.5625-18UNJF threads, compliant with SAE AS5179D and AS4841 standards. The item is classified as a critical application component and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible via eauditnet.com. All supplies must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951. The use of ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, and items are to be palletized accordingly. The unit of issue is each, with no quantity variance permitted. Inspection and acceptance occur at the destination, and delivery is FOB origin with a required delivery timeline of 154 days, targeting January 19, 2027, as the ship date. All markings, labeling, and documentation must meet federal specifications, and shipment must follow DLA transport procedures C19 and C20 to the designated delivery point at Robins Air Force Base, Georgia.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CAP, TUBE
Solicitation # SPE7M3-26-T-7850
This contract pertains to the procurement of 10 units of a pressure seal flareless tube fitting with NSN 4730-01-186-4740 and part number MS21914-5W, supplied under solicitation SPE7M3-26-T-7850. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and must be manufactured by a qualified producer listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List. The product must comply with SAE AS18280H and AS21914F standards, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitute chemicals requiring prior approval. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are categorized with specific verification levels or AQLs. The Certificate of Conformance under FAR 52.246-15 is authorized, subject to Quality Assurance instructions. Delivery is required FOB origin within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and units must be shipped to the designated government location at JB Anchorage, AK. Transportation details are governed by DLAD procedural notes, and the contract is funded under the Department of Defense’s Fluid Handling Division. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and the original required delivery date is August 3, 2026. The supplier must be an accredited manufacturer or assembler listed on the PRI QML/QPL, and all components must comply with the referenced non-government standards and DLA procurement policies.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7839
This contract specifies the procurement of a straight brass adapter connecting 3/8 inch tube to 3/8 inch pipe, featuring a self-aligning compression sleeve and nut, intended for aircraft applications. The item is identified as a commercial product of a type, manufactured by Parker-Hannifin Corp with part number 68CA-6-6 and NSN 4730-01-218-6656, with a requirement for exactly 20 units delivered within 20 days from the contract award. All items must comply with DLA’s packaging standards under RP001 and technical quality requirements referenced from the DLA Master List, including the mandatory removal of government identification from non-accepted supplies. Packaging must meet MIL-STD-2073-1E, with specific material specifications for wrappers, cushioning, and intermediate containers, and marking must adhere to MIL-STD-129 with no special marking codes applied. The delivery is FOB origin, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. The items must be shipped via traceable freight to the USNS HECTOR A CAFFERATA (ESB-8) in San Diego, California, with a required delivery date of August 3, 2026, and the contract includes detailed shipment tracking identifiers and government-only administrative codes. The solicitation number is SPE7M3-26-T-7839, issued under NAICS code 332996 by the Department of Defense’s Fluid Handling Division, with William Cain listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
UNION, TUBE
Solicitation # SPE7M4-26-T-300W
This contract is for the procurement of 730 units of a 7075 aluminum alloy union tube nipple with a 0.25 inch outer diameter, identified by NSN 4730-00-451-6047 and part number MS21902W4, conforming to SAE AS21902D and referenced by SAE AS18280H. The item is classified as a commercial item and meets Class 3 thread specifications. All components must comply with the Qualified Products List or Qualified Manufacturers List requirements under Procurement Note H02, and the product must adhere to strict prohibitions against Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds, except for specific functional applications approved by NAVSEA. The item is designated as critical and must be manufactured according to approved technical data packages rev B Gen 2. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 24 indicating open inspection or use, and palletization per DLA packaging requirements. Delivery is required within 37 days FOB origin to Robins Air Force Base, GA, with zero variance in quantity and inspection and acceptance at destination. The contract includes provisions for configuration change management, removal of government identification from non-accepted supplies, and applies Covered Defense Information requirements. The unit price is $730 per piece, totaling $532,900, with a required ship date of September 24, 2026, and an original delivery date of March 20, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7842
This contract is for the procurement of ten straight pipe-to-tube adapters with the NSN 4730-01-436-9432 and part numbers SS-600-1-4BT, SSLK-38-14, and TL2814-4, sourced from approved suppliers including Swagelok, Omega Engineering, and Williams International. The item is designated a critical application component, requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with palletization and labeling governed entirely by DLA procurement rules. Delivery is FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at destination after a 20-day lead time. The item must be shipped via traceable freight to the specified military vessel address in San Diego, explicitly prohibiting parcel post. The contract reference number is SPE7M3-26-T-7842, with a required delivery date of August 3, 2026, and a solicitation response deadline of August 17, 2026. The primary point of contact is William Cain of the Department of Defense’s Fluid Handling Division, and the unit of issue is each, with a total contract value of $10.00 per unit. All government-specific identification markings must be removed from non-accepted supplies per RQ011, and all documentation must reflect the correct DLA unit of issue as defined in official DLA tables. The shipping address, freight control number, project identifier, and other government-use only fields must be accurately applied for logistics tracking and accountability. The solicitation is managed under NAICS code 332996 and is classified as a federal procurement initiative without set-aside provisions. Compliance with every technical, packaging, labeling, and delivery directive is mandatory for contract award and acceptance.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M3-26-T-7859
The contract specifies the procurement of 110 units of a NUT, TUBE COUPLING with a NSN of 4730-01-543-0023, designed to meet the technical standard SAE AS21921D and referenced by SAE AS18280H, featuring a right-handed thread, cadmium overall plating, and corrosion-resistant properties. The item is classified as a critical application product and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List. Strict prohibitions ban the use of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. All supplies must conform to the DLA Master List of Technical and Quality Requirements, which override other standards like ASTM D3951, and must be packaged, marked, and labeled according to MIL-STD-129 and RP001 packaging guidelines, with palletization compliant with DLA requirements. Delivery is split between two CLINs: 21 units to Robins Air Force Base in Georgia with a need ship date of February 23, 2028, and 89 units to San Diego, California, with a need ship date of July 26, 2026, though both shipments are required to be delivered within 87 days of contract award. The item is FOB origin, with zero variance allowed in quantities, inspection and acceptance occurring at destination. The unit of issue is each (EA) at a unit price of $1.00 per piece totaling $110. The contract, issued under solicitation SPE7M3-26-T-7859, enforces configuration change management through engineering change proposals and variance requests, and requires removal of government identification from non-accepted supplies. The point of contact is William Cain at the Department of Defense’s Fluid Handling Division, with full procurement details governed by DLA procedures and the referenced DIBBS portal for solicitation tracking.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO HOSE
Solicitation # SPE7M3-26-T-7856
This contract is for the procurement of 2,693 units of an elbow fitting designed to connect pipe to hose, identified by NSN 4730-01-230-6353, under solicitation SPE7M3-26-T-7856. The item requires specialty metals and a chemical-resistant coating, subject to DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010 due to its value exceeding the Simplified Acquisition Threshold. It must comply with SAE AS9100 quality standards and the contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified third-party assessment organization. The technical data associated with this item is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, domestically or abroad, with DFARS 252.225-7048 governing access. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may handle the controlled technical data. The contract mandates adherence to specified CDRLs and DD Form 1423s, along with configuration change management procedures and potential variance requests. Delivery is required within 154 days after delivery order, with performance location in New Cumberland, PA, and the primary point of contact is William Cain of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TUBE, BENT, METALLIC
Solicitation # SPE7M4-26-T-300S
The contract pertains to the procurement of a bent metallic hydraulic buffer tube, designated by NSN 4710-00-010-4038, with a requirement for 51 units to be delivered within 77 days under full and open competition. The item is classified as a critical application product and must conform to multiple technical specifications, including detailed drawings and quality assurance provisions referenced by revision numbers and dates, with mandatory adherence to AIA/NAS NAS847 for protective caps and plugs, and Army Drawing 12369004 for finish. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization governed by DLA’s packaging requirements, and all preservation and packaging materials must be free of mercury compounds and ozone-depleting chemicals. Inspection and acceptance occur at origin using zero-defect sampling standards such as MIL-STD-1916 or comparable plans, with critical, major, and minor attributes assigned strict verification levels or AQLs. A prototype package is required to validate fit and size compliance with the SPI, and first article testing may be invoked if specified. The delivery is FOB origin to DLA Distribution Anniston, with the original required delivery date set for July 3, 2027, and the need ship date is November 3, 2026. All technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes paragraph 8.3 while enforcing tailored higher-level quality controls for both manufacturers and non-manufacturers.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-300Q
This contract is for a single nonmetallic hose assembly, part number P206TC0639080808-13, manufactured by Parker-Hannifin Corporation, with NSN 4720017315766. The item is classified as a restricted source requiring government engineering approval and prohibits the use of Class I ozone-depleting chemicals, with all substitutes subject to prior approval regardless of specification allowances. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and palletization per RP001. The delivery is FOB origin with a strict 10-day lead time, zero variance in quantity, and inspection and acceptance occurring at the destination. The sole delivery address is the U.S. Army unit at Fort Riley, Kansas, with a required delivery date of August 3, 2026. Transportation directives follow DLA Procurement Notes C19 and C20, and the item is identified under solicitation SPE7M4-26-T-300Q, issued under NAICS code 326220 by the Department of Defense’s Fluid Handling Division. The contract is subject to technical and quality requirements from the DLA Master List, with the controlling revision tied to the solicitation issue date.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-300T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 0001S00000053, totaling 15 units to be delivered within 286 days after order. The solicitation is issued under number SPE7M4-26-T-300T with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 332912. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, identification, configuration management, and export control directives are strictly enforced, including compliance with ITAR or EAR regulations for technical data, which restricts access to foreign persons unless authorized. Only DLA contractors approved under the US/Canada Joint Certification Program, having completed mandatory training and documentation, may handle such controlled data. The item must be marked per physical identification requirements, and non-accepted supplies must be stripped of government identification. Inspection and acceptance are to occur at the origin, and the place of performance is located in New Cumberland, Pennsylvania, with a primary point of contact at Blake Tushar of the Fluid Handling Division under the Department of Defense.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300U
Offerors must comply with strict requirements for this solicitation, including the prohibition of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, ensuring no equipment or services from restricted foreign sources are used in performance. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring detailed disclosure of any non-domestic materials and strict adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit specific representations for eligible categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this allows buyers to consolidate or adjust requirements without administrative delays, though this does not apply to Auto IDC. Proposals including items produced via additive manufacturing are ineligible for award unless prior written approval is granted. Vendors must register through the new AMPS system within two months to retain access to the Vendor Shipment Module, with those using VSM WebServices required to update their internal schema to avoid disrupted shipping. All offers must be submitted via DIBBS, and if unable to quote by the closing date, a “No Bid” submission with anticipated date or reason is mandatory to avoid misinterpretation of non-responsiveness. Fast Pay is not applicable. The item under solicitation is a hose assembly with NSN 4720-01-625-6296, quantity 16 units, with a 140-day delivery requirement, and the point of contact is Blake Tushar.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M3-26-T-7849
The contract is for one unit of a machine thread plug identified by NSN 4730-01-696-9906 under solicitation SPE7M3-26-T-7849, with a response deadline of August 17, 2026 and a delivery requirement of 20 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by whether the acquisition is simplified or large, and whether any solicitation amendments have been issued. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Tailored higher-level contract quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance may occur at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals working for U.S. entities, and requires prior authorization from the Department of State or Commerce. Access to the controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed the required DOD training and questionnaire and have received DLA approval. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the point of contact is William Cain of the Fluid Handling Division within the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332322
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-7848
The contract pertains to the procurement of 13 units of an ELBOW, TUBE with NSN 4730-00-913-6961, manufactured via a forging process that requires specialized tooling. The item is subject to strict export controls under either ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including foreign national employees and overseas subsidiaries, regardless of location. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Further, the contract mandates CMMC Level 2 certification for any third-party assessment organization involved in cybersecurity compliance. The solicitation number is SPE7M3-26-T-7848, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 332322, and the point of performance is Cherry Point, NC, with a delivery timeframe of 396 days ADO. The contracting officer is Nicholas Davis, reachable via email and phone provided, and procurement details are linked through the DIBBS portal.
Sheet Metal Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7844
The contract pertains to the procurement of four straight adapters, part number 4730-01-699-3772, under solicitation SPE7M3-26-T-7844, with a delivery requirement of 20 days after award. The item is governed by stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the drawing is source-controlled, meaning only the listed approved sources may supply the item unless otherwise authorized. Offerors seeking to qualify future products must contact the cognizant design activity noted on the drawing. The contract prohibits the use of Class I ozone-depleting chemicals in any delivered items, overriding any conflicting specifications without relaxing product performance requirements, and mandates that substitutes be pre-approved. Sampling for quality assurance must comply with MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels unless stated otherwise in governing documents. Configuration changes require formal engineering change proposals and variance requests, and all technical data associated with the item is subject to export controls under ITAR or EAR, with distribution restricted to contractors who have obtained JCP certification, completed required DLA training, and received explicit authorization. The contracting office is the Defense Logistics Agency’s Fluid Handling Division, with performance occurring in San Diego, California, and inquiries directed to William Cain at the provided contact details.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details