Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Temporary Bypass Pumping Systems

Active

State & Local

Response Deadline09/10/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation, operation, and removal of temporary bypass pumping systems to support sewer rehabilitation activities, ensuring continuous wastewater flow during critical infrastructure upgrades. Work must be performed in accordance with industry standards and safety protocols, with all systems deployed and dismantled efficiently to minimize disruption to municipal services and surrounding communities. The subcontract is issued under NAICS code 562998, indicating it covers other environmental protection services, and is managed by DAS Procurement under the Connecticut state agency. Proposals are due by September 10, 2026, at 3:00 PM, and while the solicitation number and point of contact are not provided, interested bidders should access the official portal at the provided link for detailed submission guidelines and additional requirements. There is no set-aside designation specified, meaning the contract is open to all qualified contractors without preference based on size or ownership status. Performance will occur across unspecified locations within Connecticut, and the contractor must ensure compliance with all local, state, and federal regulations governing wastewater management and temporary construction operations.

General Info

Install, operate, and remove temporary bypass pumping systems for sewer rehab in Connecticut by September 10, 2026.

Agency

Connecticut → DAS ProcurementView Agency

NAICS

562998 - All Other Miscellaneous Waste Management ServicesView NAICS

Place of Performance

CT, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 03:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyConnecticut → DAS Procurement

ContactsNo contacts available

OfficeN/A

Organization / Agency

Connecticut → DAS Procurement

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install, operate, and remove temporary bypass pumping systems during sewer rehabilitation work.

Similar Contracts

Same NAICS industry code

Removal and Disposal of Existing Dock LevelersThe contract titled Removal and Disposal of Existing Dock Levelers requires the safe and complete removal of old dock levelers at a facility in Tacoma, Washington, with a ZIP code of 98493. The scope includes disconnecting all associated utilities, demolishing any mounting structures that may be necessary to facilitate removal, and hauling away all resulting scrap metal for proper recycling or disposal. All work must be performed in compliance with safety and environmental standards to ensure no damage to surrounding infrastructure or hazards to personnel. The project is structured as a subcontract under NAICS code 562998, which covers other waste management services, and is managed by the Department of Veterans Affairs through its 260-NETWORK Contract Office 20. The solicitation was posted on August 7, 2026, with a required response deadline of August 21, 2026, at 2:00 PM. The location of performance is exclusively at the Tacoma site, and no alternative addresses or set-aside classifications are specified.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Sanitation Tank Cleaning and Decontamination Services

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

Slash Treatment and Debris ManagementThe contract titled Slash Treatment and Debris Management focuses on the responsible management of logging slash through methods such as piling, chipping, or prescribed burning to mitigate wildfire risks and enhance forest health. This subcontract is part of a broader stewardship initiative under the USDA Forest Service and is designated as a Small Business Set Aside, meaning only eligible small businesses can compete for award. The work will be performed in the area surrounding Salida, Colorado, with a target zip code of 81201, and the NAICS code 562998 indicates it falls under other waste management services. The solicitation was posted on August 6, 2026, and responses must be submitted no later than September 8, 2026, at 2:00 PM, with no set-aside specifications beyond the small business requirement. The agency responsible is the Stewardship Contracting Branch within the Department of Agriculture, seeking qualified contractors to carry out ecological restoration activities in a manner that supports sustainable forest management and public safety.

Stewardship Contracting Branch Usda-Fs

POSTED

DEADLINE

in about 1 month

Cleaning of Sanitation Tanks

Solicitation # NNSY-1200N-0026

Norfolk Naval Shipyard is conducting market research under FAR Part 10 to identify qualified sources capable of performing sanitary tank cleaning services at its Portsmouth, Virginia facility. This is not a solicitation or request for proposals, but a sources-sought notice designed to gather industry capabilities in support of an anticipated Firm Fixed Price contract. The effort falls under NAICS code 562998, All Other Miscellaneous Waste Management Services, and requires contractors to demonstrate the ability to perform 100% of the referenced tasks without reliance on subcontractors. All responses must be submitted as a single PDF email attachment to glenda.s.jordan3.civ@us.navy.mil no later than 9:00 AM EST on August 13, 2026, with no hard copy or fax submissions permitted. Offerors must provide company name, address, telephone number, CAGE code, DUNS number, and point of contact details, and must indicate if they are a small business along with their socioeconomic status. The work will involve strict environmental compliance, including handling hazardous waste in UN Performance Oriented Packaging with watertight lids, proper labeling with outage dates and contractor information, and adherence to specific coating specifications such as MIL-PRF-23236 and MIL-DTL-24441 for tank surfaces. Inspection and acceptance will occur on-site at NNSY through joint government-contractor verification, requiring compliance with SSPC-SP-1 for tank cleanliness verified by a visual water break test, chloride swipe testing, and use of approved blast media. Contractors must appoint at least two direct Environmental Coordinators who have completed NNSY Code 106.3 training and coordinate all waste streams with NNSY Code 106.322, including proper manifests and DOT-approved transporters. Work authorization is strictly controlled—no tasks may begin without an approved Work Authorization Form from NNSY Code 246, and all confined space entries require certification by a competent person and presence of a Marine Chemist. Only electric or approved non-gasoline-powered equipment is allowed on-site, and materials must be stored in approved cone boxes with no long-term storage permitted in lay down areas. Contractors must also comply with CUI handling protocols, submit weekly and final reports tracking actual manhours and material costs, and adhere to marine and nuclear security requirements including DISS-based visit requests for personnel needing access to Restricted Data or Nuclear Naval Propulsion Information. The estimated contract value is

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

Catch Basin Cleaning

Solicitation # 36C26026Q0880

The Boise VA Medical Center requires professional cleaning of catch basins, floor drains, and sediment separators to maintain sanitary conditions and ensure proper drainage across its facilities, as internal staff lack the resources to perform this critical maintenance annually. The contractor must supply all labor, equipment, tools, and materials necessary to complete thoroughly clean these drainage components, with each completed task marked using alternating white and green dashes to indicate readiness for inspection by the Contracting Officer’s Representative. Should the inspection reveal inadequately cleaned areas, the contractor is obligated at their own expense to re-clean until full compliance is achieved. This solicitation, numbered 36C26026Q0880, is open for bids through August 18, 2026, and is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, reflecting a commitment to supporting veteran-owned enterprises. The work will be performed at the Boise VA Medical Center in Idaho, with the contract office located in Vancouver, Washington, under the Department of Veterans Affairs. All inquiries and communications should be directed to Craig L Brown or Craig Ritchey, and the North American Industry Classification System code for this work is 562998, indicating it falls under other environmental pollution control services.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

SCRAP METAL AGREEMENT

Solicitation # N6660426Q0491

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) has initiated a scrap metal recycling sales agreement to sell recyclable metal materials generated at its facility in Newport, Rhode Island. This is not a traditional contract but a sales agreement under the Solid Waste and Recycling Program, aimed at diverting 50% of solid waste from landfills by responsibly managing and selling scrap metal. The agreement requires qualified vendors to purchase scrap metal commodities at fixed net prices per gross ton, calculated as a percentage of the Fastmarkets price index for the Boston location, with pricing tied to the first issue of the index in the month the metals are received. Specific metal types—including mixed steel, aluminum solids and turnings, brass, stainless steel, copper wire, mixed wire, coupro nickel, and monel—are listed with defined pricing structures and container requirements. The vendor must supply 12 to 22 cubic yard lugger-style containers and/or 30 to 40 cubic yard roll-off dumpsters at no cost to the government and ensure pickup within two working days of notification, with pickups limited to weekday business hours unless otherwise approved. The vendor is responsible for complying with all federal, state, and local regulations, including Department of Transportation and Naval Station Newport safety and security protocols. Drivers must hold a CDL and obtain facility access badges, with the vendor covering all associated fees. The vendor’s facility must be located within 40 miles of NUWCDIVNPT to allow government personnel to witness weigh-ins, and all metals must be properly segregated at the source. Payment is made via electronic funds transfer by the 10th of each month for the prior month’s deliveries, based on Fastmarkets data submitted with invoices. A 20% deposit equivalent to three months of estimated generation is required before the first pickup. The vendor must indemnify NUWCDIVNPT against claims arising from their operations, assume full liability for damages caused to government property, and comply with strict rules preventing the use of government branding in any advertising. The agreement runs for one year beginning October 1, 2026, with options for annual extensions up to a total of five years. Proposals must be submitted by August 18, 2026, and selection will be based equally on past performance and price, with no discussions allowed unless deemed necessary by the contracting officer. Any subcontracting requires prior written approval, and the original vendor remains fully responsible for all obligations.

Nuwc Division Newport

POSTED

DEADLINE

On-Call Emergency Response for Waste IssuesThe contract requires 24/7 on-call emergency response services to manage urgent waste-related problems that disrupt park operations, including container overflows, illegal dumping incidents, and equipment failures. Responders must be available at all times to swiftly address these issues and restore normal functionality, ensuring parks remain clean, safe, and operational. The work is classified as a subcontract under NAICS code 562998 and is posted by the state of Utah, with responses due by August 20, 2026. All performance is expected to occur within Utah, though specific locations are not detailed. The opportunity is open for bidding through the Bonfire platform, with no set-aside designation or point of contact provided.

POSTED

DEADLINE

Waste Container Maintenance and CleaningThe contract titled Waste Container Maintenance and Cleaning establishes a subcontract for the periodic washing, repair, painting, and replacement of waste containers to maintain cleanliness, functionality, and visual appearance. The work is required to ensure consistent hygiene standards and uphold the overall aesthetic of public spaces under the jurisdiction of the Texas Parks and Wildlife Department. Services must be performed regularly and responsively to address wear, damage, and contamination, with an emphasis on reliability and compliance with sanitation expectations. The solicitation was posted on August 5, 2026, with a response deadline of August 19, 2026, and is categorized under NAICS code 562998 for other waste management services. Although specific location details are not provided, the place of performance is tied to Texas, and the contract is managed through the Texas SmartBuy procurement portal. There is no set-aside designation indicated, and the contract is open to eligible subcontractors capable of meeting the required service standards across the department’s operational areas.

Parks and Wildlife Department

POSTED

DEADLINE

Demolition and Site Cleanup

Court Services Offender Supv Agcy

POSTED

DEADLINE

Removal and Disposal of Existing HVAC Units

W071 Endist Portland

POSTED

DEADLINE

Portable Toilets, Vault Pumpouts Toilets & Septic Tank Pumpouts

Solicitation # W912EF26QA070

The contract solicitation titled Portable Toilets, Vault Pumpouts Toilets & Septic Tank Pumpouts under solicitation number W912EF26QA070 is a total small business set-aside managed by the U.S. Army Engineer District Walla Walla, part of the Department of Defense. It is designated for small businesses under NAICS code 562998 and requires responses by July 28, 2026, with the solicitation posted on July 13, 2026. The primary place of performance is in Umatilla, Oregon, with a ZIP code of 97882, and the contract will be executed from the office located in Walla Walla, Washington. Gregory Moyer serves as the primary point of contact, reachable via email at Gregory.Moyer@usace.army.mil or by phone at 509-527-7207. The opportunity is available for viewing through the SAM.gov workspace link, and participation is restricted to certified small businesses meeting the set-aside criteria.

US Army Engineer District Walla Wal

POSTED

DEADLINE

Galley Grease Trap

Solicitation # 31170PRGGT

A solicitation for the Galley Grease Trap project has been issued under notice number 31170PRGGT by the Department of Homeland Security, specifically the LOG-9 office based in Norfolk, Virginia. The work is to be performed at the US Coast Guard Base in Old San Juan, Puerto Rico, with a mandatory site visit scheduled for August 6, 2026, at 9:00 AM. Prospective vendors are required to review the attached Statements of Work prior to the site visit and must contact the designated points of contact, Rodrigo Perez and Dagmar Torres, to arrange access to the facility. All quotes must be submitted via email to juan.e.caporoure2@uscg.mil no later than August 12, 2026, at 4:00 AM, and must include the solicitation number in the subject line. This procurement is classified as a sources sought notice with no set-aside designation, and the applicable NAICS code is 562998.

POSTED

DEADLINE

More opportunities from Connecticut → DAS Procurement

Same awarding agency

2027-07 Independence Day Celebration - Annual Fireworks Display

Solicitation # 38399

The Town of Fairfield is seeking qualified licensed professional contractors to execute the annual Independence Day fireworks display, to be launched from a barge positioned 1,200 feet offshore at Jennings Beach. The contractor must provide a display consisting of a minimum of 2,100 shells, with sizes ranging from three-inch to eight-inch, along with specialized effect barrages and a grand finale. Proposals must include exact counts for all special effects and the finale to ensure compliance with the stated requirements. The event is organized by the Parks & Recreation Department, and the contractor will be responsible for all logistical, safety, and operational aspects of the display in accordance with local and federal regulations. Proposals are due by August 21, 2026, at 3:00 PM, and the solicitation is issued under reference number 38399, posted on August 7, 2026. All relevant documentation is available exclusively through the provided online portal, and no questions submitted via this platform will be addressed. The primary point of contact for the solicitation is Pru O’Brien, reachable at pobrien@fairfieldct.org. This procurement is open to qualified contractors under a competitive bidding process managed by the Connecticut Department of Administrative Services, with no set-aside preferences indicated.

POSTED

about 22 hours ago

DEADLINE

Auditing Services

Solicitation # 08-07-26

The City of Groton is soliciting sealed proposals for auditing services covering both the City of Groton and the Bozrah Light and Power Company, with all bids due by 11:00 A.M. on August 17, 2026, at the Office of the Purchasing Agent located at 295 Meridian Street, Groton, Connecticut. The solicitation, identified as 08-07-26, was posted on August 7, 2026, and is open to qualified firms capable of providing comprehensive auditing services to ensure financial accountability and compliance for both entities. Proposals must be submitted in sealed envelopes and delivered to the specified address, with no electronic submissions accepted. The primary point of contact for inquiries is Ronald Yuhas, reachable at 860-446-4114 or yuhasr@cityofgroton-ct.gov, and all responses must adhere strictly to the deadline to be considered. The services are intended for a public sector client within Connecticut, and while no specific set-aside or NAICS code is indicated, the procurement follows standard SLED government bidding procedures.

Other Accounting Services

POSTED

about 23 hours ago

DEADLINE

Hydraulic System Components SupplyThe contract pertains to the supply of hydraulic components designed to enable self-loading, payout, and take-up functions for a custom cable or wire reel trailer integrated into a system with an 11,000 lbs gross vehicle weight rating. The components must be engineered to operate reliably under field conditions and integrate seamlessly with the trailer’s existing mechanical and structural systems. Suppliers are expected to deliver fully functional, tested, and certified hydraulic subsystems that meet specified performance, safety, and durability standards without requiring extensive modifications to the host platform. The solicitation is classified as a subcontract under NAICS code 333992, indicating it falls within the category of Other Miscellaneous Machine Equipment Manufacturing. It was posted on August 7, 2026, with a response deadline of August 18, 2026, and is being managed by DAS Procurement under the Connecticut agency office. The place of performance and point of contact details are not specified, and the procurement is not designated with a specific set-aside status. Interested parties must submit proposals through the official portal linked in the solicitation, ensuring compliance with all technical and contractual requirements prior to the deadline.

Welding and Soldering Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Raw Steel Tubing and MaterialsThe contract seeks a supplier to provide raw steel tubing, plate, and mill-certified materials that comply with ASTM and ASME specifications for use in fabrication processes. These materials must meet stringent quality and certification standards to ensure suitability for industrial and structural applications. The solicitation is classified as a subcontract under NAICS code 423510, indicating it pertains to wholesale trade of metal and mining materials, and is managed by DAS Procurement under the Connecticut agency. The opportunity was posted on August 7, 2026, with a firm response deadline of August 26, 2026, at 8:00 PM. No specific place of performance or point of contact is listed, and there is no set-aside designation indicated. Interested parties must submit responses via the provided portal link before the deadline to be considered.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Compliance DocumentationThe contract requires third-party inspection and documentation of fabricated components to verify adherence to engineered specifications and quality assurance protocols, with emphasis on weld integrity and material certification through standardized testing procedures. All inspections must be conducted by qualified personnel using approved methodologies, and comprehensive documentation must be submitted to confirm compliance before component acceptance. This is a subcontract under NAICS code 541350, issued by DAS Procurement through the Connecticut agency, with responses due by August 26, 2026. The work is expected to be performed remotely or at designated fabrication sites without a specified place of performance, and the solicitation is open through the Connecticut Source portal with no set-aside provisions identified.

Building Inspection Services

POSTED

about 23 hours ago

DEADLINE

Delivery and Logistics of Fabricated StructuresThe contract involves the transportation of large, heavy fabricated steel structures from a fabrication facility to a designated site in Norwich, Connecticut, requiring specialized hauling equipment and detailed route planning to accommodate oversized loads and infrastructure constraints. The work demands precise logistics coordination, including permitting, escort services, and adherence to state and federal transportation regulations to ensure safe and timely delivery. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for specialized freight, and is being managed by DAS Procurement under the Connecticut agency. The contract was posted on August 7, 2026, with a response deadline of August 26, 2026, giving potential bidders approximately three weeks to prepare and submit proposals. No set-aside designation is specified, meaning the opportunity is open to all eligible subcontractors without restrictions based on business size or ownership type. While specific details regarding the fabrication facility location, exact load dimensions, or delivery timelines are not provided in the data, bidders must account for the full scope of heavy haul logistics required for moving bulky steel components to the Norwich site. All submissions must be directed through the official Connecticut DAS procurement portal linked in the posting.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Fabrication of Tubular Steel Transmission StructuresThe contract involves the fabrication of engineered tubular steel structures specifically designed for electrical transmission systems, requiring precise cutting, rolling, welding, and assembly processes to meet rigorous engineering and quality standards. All work must be performed in compliance with technical specifications ensuring structural integrity, durability, and safety for high-voltage transmission applications. The subcontract is issued under NAICS code 332312, which classifies it within the forged steel and stamped metal product manufacturing sector, indicating specialized industrial fabrication capabilities are essential. The solicitation was posted on August 7, 2026, with a deadline for responses set for August 26, 2026, at 8:00 PM. The contract is managed by DAS Procurement under the Connecticut state agency, though specific performance location details are not provided. Bidders must submit proposals through the official state procurement portal by the specified deadline, with no set-aside preferences indicated. The absence of point-of-contact information suggests all inquiries should be directed via the provided portal link, and interested parties are expected to review full technical requirements and submission guidelines on the official site.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Self Loading Reel Trailer

Solicitation # 27-18

The contract seeks a self-loading reel trailer capable of handling steel and wood cable or wire reels with a maximum width of 60 inches and diameter of 96 inches, and a minimum reel weight of 8,000 pounds. The trailer must be no wider than 102 inches with no length restrictions and feature hydraulic self-loading capability with both clamp style and arbor style designs submitted for comparison. Arbor sizes of 2 7/8 inches are standard, but adapter plates must be included to accommodate larger arbor sizes up to 5 inches. Both self-driving and tow-behind configurations are required, with self-driving preferred. The trailer must incorporate a 2 ½ inch or 3 inch lunette eye, an RV-style electrical connection, and a hydraulic or manual tongue jack. Hydraulic payout and take-up systems are mandatory, along with a reel brake, lug nut indicators, electric brakes with a safety breakaway system, wheel chocks and holders, and outrigger pads. A quote must be provided both with and without a level wind option. This replacement unit will supersede the existing T-09 Roose manual self-loading trailer, which has a GVW rating of 11,000 pounds, so the new trailer must meet or exceed this capacity and fully comply with all technical and operational requirements.

Truck Trailer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Project L-617 Transmission Tubular Steel Structures

Solicitation # 27-13

Burns & McDonnell is soliciting qualified bidders for the fabrication and delivery of transmission tubular steel structures under Project L-617, identified by solicitation number 27-13. The opportunity is managed on behalf of Norwich Public Utilities, with the request for proposal issued through the Connecticut Department of Administrative Services. To ensure the confidentiality of sensitive project details, interested parties must first execute a nondisclosure agreement provided by Burns & McDonnell before gaining access to the full RFP package. The solicitation was posted on August 7, 2026, and responses are due by August 26, 2026, with all submissions required to be received by 8:00 PM Eastern Time. The primary point of contact for inquiries is Karl Klein, who can be reached via email at kklein@cityofnorwich.org or by phone at 860-823-3706. The project performance location is in Connecticut, and bidders are expected to coordinate with the agency through the official DAS Procurement portal accessible via the provided UI link.

Structural Steel and Precast Concrete Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

WOLCOTT HILL ROAD SEWER MAIN EXTENSION WETHERSFIELD, CONNECTICUT

Solicitation # 2026B-15

The contract involves the installation of approximately 300 feet of new 8-inch PVC sewer main, three new sewer manholes, and five new 6-inch PVC sewer laterals to serve five specific properties on Wolcott Hill Road in Wethersfield, Connecticut. All work must include necessary labor, equipment, permits, fees, and associated costs, along with complete temporary and permanent restoration of all affected surfaces. Support equipment and accessories as specified must also be provided and installed to ensure full compliance with project requirements. Bidders are directed to Section 01010 Summary of Work for detailed technical specifications and scope clarifications. The solicitation, titled WOLCOTT HILL ROAD SEWER MAIN EXTENSION WETHERSFIELD, CONNECTICUT and identified as 2026B-15, was posted on August 7, 2026, with responses due by September 9, 2026. It is being administered by the Connecticut Department of Administrative Services and falls under the SLED organization type. The primary point of contact for inquiries is Dana Chalupka, reachable via phone or email. All work must be performed at the specified location in Wethersfield, and interested parties must respond through the official CTSource portal before the deadline.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month

EASEMENT SEWER REHABILITATION PROGRAM – PHASE II BLOOMFIELD, CT

Solicitation # 2026B-01

The contract encompasses the rehabilitation of sewer infrastructure in Bloomfield, Connecticut, under the Easement Sewer Rehabilitation Program – Phase II, requiring the installation of approximately 45,998 linear feet of Cured-In-Place Pipe lining, accompanied by comprehensive CCTV inspections of the entire length prior to rehabilitation. It includes heavy hydraulic cleaning of 4,500 linear feet, monolithic cementitious lining of 1,850 square feet of sewer manholes, reconnection of eight active service laterals and top hats, removal and replacement of twenty existing manhole frames and covers, and repair of twelve manhole inverts. All necessary labor, equipment, permits, fees, and associated accessories are to be provided by the contractor to complete the scope as specified. The work is subject to strict adherence to the detailed requirements outlined in Section 01010 Summary of Work. This solicitation, numbered 2026B-01, was posted on August 7, 2026, with proposals due by September 10, 2026, and is managed by the Connecticut Department of Administrative Services Procurement division. It is a state-level procurement with the place of performance entirely within Connecticut and no set-aside designation specified. Primary contact for inquiries is Dana Chalupka, reachable via phone at 860-278-7850 or email at dchalupka@themdc.com. The project is part of a broader infrastructure improvement initiative aimed at enhancing the longevity and functionality of the municipal sewer system in the area.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month

Performance-Enhanced Textile Supply (Percenta or Similar)The contract seeks the supply of high-performance textile materials, specifically Percenta or an equivalent product, engineered to meet stringent requirements for stain resistance, durability, and environmental compliance in public sector seating applications. These textiles must be suitable for heavy-use environments such as government buildings, transit facilities, or public service centers, ensuring long-term performance with minimal maintenance. The solicitation is structured as a subcontract under NAICS code 314120, indicating a focus on textile mill products manufacturing, and is managed by the Connecticut Department of Administrative Services Procurement division. Interested parties must submit responses by the deadline of August 20, 2026, at 6:00 PM, with submissions guided through the official CTSource Bid Board portal. Performance expectations include adherence to environmental standards and material specifications that prioritize sustainability and resilience under continuous public use.

Curtain and Linen Mills

POSTED

DEADLINE