Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Temporary Fire Alarm System Design and Engineering

Active

Federal

Response Deadline08/20/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the design and engineering of a temporary fire alarm system tailored to meet stringent compliance standards including VA specifications, NFPA 72, and ICRA Class IV requirements for healthcare environments. The work must ensure the system provides adequate life safety protection during construction or renovation activities at a facility located in Waco, Texas, with a ZIP code of 76711. The scope requires technical expertise in integrating alarm components that adhere to healthcare-specific infection control and operational continuity protocols while maintaining full regulatory alignment with federal and industry codes. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, and is classified under NAICS code 541330 for Engineering Services. The solicitation was posted on August 6, 2026, with responses due by August 20, 2026, at 6:00 PM. The responsible agency is the Department of Veterans Affairs, specifically the 257-NETWORK Contract Office 17, which will oversee fulfillment of the requirements at the designated worksite. All proposers must demonstrate relevant experience in temporary fire protection systems and healthcare facility compliance to be considered eligible.

General Info

Design temporary fire alarm system in Waco, TX for VA under NFPA 72 and ICRA Class IV, reserved for SDVOSB.

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Waco, TX, 76711, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 06:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Engineering services to design a temporary fire alarm system compliant with VA specifications, NFPA 72, and ICRA Class IV requirements for healthcare facilities.

Similar Contracts

Same NAICS industry code

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The scope of work encompasses full-service engineering support from initial design through construction phase, ensuring technical accuracy, regulatory compliance, and efficient project delivery. The solicitation is open to qualified firms with experience in water system engineering and is specifically set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, reflecting a commitment to inclusive contracting. The project is identified under bid/contract number C2305 and falls under NAICS code 541330 for architectural and engineering services. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, and is being administered by AKM Consulting Engineers, which serves as both the contracting agency and point of contact. Primary communications regarding the solicitation should be directed to Katie Neubauer via phone or email provided. Although specific address details for the office or performance location are not listed, the project’s physical performance is confirmed to be in Riverside County, California. Interested parties are encouraged to review the full solicitation details through the official SBA opportunity portal to ensure alignment with all submission requirements and eligibility criteria for DBE participation.

AKM Consulting Engineers

POSTED

about 2 hours ago

DEADLINE

Worldwide Environmental Engineering Services

Solicitation # 19AQMM26R0323

The U.S. Department of State, through its Bureau of Overseas Buildings Operations, is soliciting proposals for a five-year Firm-Fixed-Price Indefinite Delivery/Indefinite Quantity contract to provide comprehensive environmental engineering services at U.S. diplomatic facilities worldwide. This contract, identified as 19AQMM26R0323, is a total small business set-aside under NAICS code 541330 with an estimated total value of $4.5 million, covering a base year and four one-year options, each worth $900,000. The contract requires a qualified environmental engineering firm—either as a prime or joint venture—with the technical competence to deliver asbestos and lead-based paint inspections, hazardous materials assessments, indoor air quality investigations, mold and radon testing, environmental site assessments, and remediation oversight in compliance with EPA AHERA, DOD 5220.22-M, and other federal and international standards. All work will be performed globally, including in high-threat locations, with administrative coordination based in Grassy Creek, Virginia, and oversight managed from Washington, DC. Proposals must be submitted electronically via SAM.gov by August 17, 2026, under a three-stage evaluation process mandated by the Brooks Act. The first stage assesses the technical qualifications of the lead team and core personnel, including certifications such as Certified Industrial Hygienist, Certified Hazardous Materials Manager, and Certified Safety Professional. The second stage evaluates the proposed team structure, project management approach, and past performance on similar projects. Only the most highly qualified offerors will be invited to submit pricing in the third stage, where cost becomes a factor in a best-value trade-off, not the primary determinant. A critical requirement is possession of, or eligibility to obtain, a DCSA Top Secret Facility Clearance and an approved classified information system; foreign ownership, control, or influence is prohibited unless fully mitigated under DCSA-approved protocols. Offerors must be U.S.-organized entities with active SAM.gov registrations and valid Unique Entity IDs. The contract will commence on May 16, 2027, and conclude on May 15, 2032, with acceptance of deliverables occurring at the site of performance, including overseas diplomatic posts and domestic OBO facilities.

Acquisitions - Aqm Momentum

POSTED

about 6 hours ago

DEADLINE

Bradley TOW Missile Launcher Supportability TEM Requirement

Solicitation # SPRRA2-26-Q-SP01

Hq Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified firms. The project requires a range of professional services including engineering, environmental analysis, surveying, geotechnical work, permitting, public outreach, and utility location, with relevant NAICS codes covering architectural and engineering services, construction, and related specialized activities. The solicitation places particular emphasis on inclusion of SBA-certified small businesses and DBEs under the Department of Transportation program, encouraging firms with these designations to submit qualifications. Interested parties must submit their qualifications package and request solicitation documents by 5 p.m. PST on August 14, 2026, with responses due no later than September 15, 2026. All inquiries and submissions should be directed to Charlie Brown at charles.brown@ghd.com.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, line-bid items for drilling and abandonment, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design, along with a line-item bid schedule for equipping, testing, and commissioning the new well. The well must comply with AWWA potable water standards, feature a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump systems, and tie into the Corydon Blend station and Malaga blending location, meeting all requirements from the State Water Resources Control Board, Department of Water Resources, and Elsinore Valley Municipal Water District. The consultant will prepare a Preliminary Design Report, review up to 200 submittals, assist with domestic water supply permit amendments, and develop record drawings reflecting field changes while supporting start-up, commissioning, and operator training. Proposals must demonstrate relevant qualifications and experience with utilities or government agencies, a clear understanding of the project scope, a feasible schedule with risk mitigation strategies, innovative yet practical solutions, cost transparency, and overall proposal quality. The award will be based on demonstrated competence and professional qualifications, not lowest cost. Submission requires strict adherence to formatting guidelines including a cover letter, detailed staff resumes, representative project lists, three professional references, district contract history, and a fully itemized cost proposal broken down by task. Required certifications and documentation include American Iron and Steel Compliance, Lobbying Certification, Debarment and Suspension Certification, System for Award Management information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration—all submitted via Attachment “2.” Additionally, the contractor must comply with Build America Buy America requirements, including domestic-content certifications and waiver memoranda for non-compliant materials, and adhere to federal mandates on telecommunications restrictions, anti-trafficking, environmental recovered materials, civil rights compliance, and sanctions against Iran and Russia. The proposal submission deadline is September 1, 2026, via the PlanetBids portal, with questions due by August 2

Ardurra Group, Inc.

POSTED

about 14 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves designing a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well on Elsinore Valley Municipal Water District property, with full engineering and construction support services required throughout both design and implementation phases. The scope encompasses hydrogeological evaluation, aquifer analysis, well design adhering to AWWA standards and matching the existing casing depth with a 24-inch stainless steel Ful-Flo louvered screen, civil and structural site design including grading, drainage, and utility coordination, mechanical and electrical engineering for well equipping, instrumentation and SCADA systems, geotechnical and soil testing, water quality sampling, environmental permitting with SWRCB and NPDES compliance, borehole geophysical logging, and comprehensive construction management with full-time on-site oversight during drilling and equipping. The project is divided into two phases: Phase 1 focuses on technical specifications, site design, bidding support, and construction management for drilling and abandonment, while Phase 2 covers detailed architectural, mechanical, structural, and electrical designs for facility equipping, testing, and commissioning, supported by engineering services during construction. Compliance with the Build America, Buy America Act and 2 CFR Part 184 is mandatory, requiring documented sourcing of domestic iron, steel, and manufactured products, along with certification of non-collusion and adherence to federal procurement rules. The consultant must submit a cost proposal with hourly rates broken down by task, capped at a not-to-exceed amount of $1,000,000, partially funded by a $400,000 BOR Grant, with the remainder covered by non-federal sources. The solicitation requires proposers to demonstrate relevant experience in municipal groundwater projects, provide detailed resumes of proposed key personnel including licensed California professionals, and confirm current certifications including DBE, MBE, WOSB, or small business status, as the set-aside prioritizes small, disadvantaged, and minority-owned businesses. Subcontractors must also meet these certifications and be disclosed in the proposal. Required documentation includes a Conflict of Interest Disclaimer, American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM registration, Public Works Contractor Registration, Executive Order N-6-22 Certification confirming no ties to sanctioned Russian entities, and a California Air Resources Board Certificate of Reported Compliance. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and must include a cover letter, three references, insurance

GEI Consultants, Inc.

POSTED

about 14 hours ago

DEADLINE

Construction Plan Review Services for Public School ProjectsThe contract involves providing construction plan review services for public school projects in Utah, requiring thorough evaluation of architectural, structural, mechanical, electrical, and plumbing designs to ensure full compliance with state and local building codes before any construction begins. The work must be performed with technical precision and adherence to regulatory standards to safeguard public safety and infrastructure integrity, with all reviews conducted prior to the initiation of construction activities. This is a subcontract opportunity with a NAICS code of 541330, indicating it falls under architectural and engineering services, and the response deadline is September 9, 2026, with the solicitation posted on August 6, 2026. The services are expected to be delivered statewide under the oversight of the Utah agency, though specific performance locations and point of contact details are not provided. Interested parties must submit their proposals by the deadline to be considered for this procurement.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Engineering Services – Emergency Generator Installation for Municipal Wells (3 Sites)

Solicitation # 26-31

Murray City is seeking qualified engineering firms to provide professional engineering services for the design, bidding, and construction support of emergency backup power systems at three municipal culinary water wells, funded in part by a federal EPA Community Grant and subject to 2 CFR Part 200 Uniform Guidance. The project, identified as RFQ 26-31, has an estimated budget of $120,000 and follows a Qualifications-Based Selection (QBS) process in alignment with the Brooks Act, meaning price will not be considered during evaluation. The selection process is two-phased: Phase I involves independent scoring of Statements of Qualifications (SOQs) based on project understanding, relevant experience with water systems and generators, qualifications of key personnel, experience with federally funded projects, past performance, and familiarity with local conditions, totaling 200 points. The top three firms will proceed to Phase II interviews, where they will be scored on technical approach, risk understanding, continuity of water operations, federal compliance, team availability, schedule coordination, and scenario-based responsiveness, adding another 100 points for a maximum combined score of 300. The highest-ranked firm will be selected for contract negotiation, during which scope and fee will be finalized under a time and expense basis. Work will be performed at three specific sites in Murray City, including 6722 South Courtland Avenue, 2205 East Eagle Ray Court, and an additional well within the city limits. The consultant must demonstrate compliance with all applicable federal, state, and local regulations, including Davis-Bacon Act wage requirements, Build America, Buy America (BABA), American Iron and Steel (AIS), Clean Air Act, Federal Water Pollution Control Act, and Utah Division of Drinking Water standards. Additional mandates include maintaining professional liability insurance of at least $2 million with appropriate coverage terms, adhering to confidentiality obligations for non-public information, disclosing potential conflicts of interest per 2 CFR 200.318(c), and certifying compliance with the Byrd Anti-Lobbying Amendment and debarment status via SAM.gov. SOQs must not exceed 16 pages excluding cover pages and resumes and must be submitted by September 7, 2026, via the Utah Public Procurement Place (U3P) platform or as a sealed hard copy to Murray City’s Purchasing Agent. All services must be performed according to a detailed schedule submitted with the proposal, with time deemed of the essence. Payment

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Forestry and Parks - Request for Proposal - ENGINEERING, DESIGN AND CONSTRUCTION ADMINISTRATION CONSULTANT SERVICES at Moose Mountain Parking Upgrades at Kananaskis Public Land Use Zone

Solicitation # AB-2026-05557

The Consultant will be responsible for reviewing and validating the Integrated Development Plan for parking area upgrades at three locations within the Kananaskis Public Land Use Zone — the Base of Moose Mountain Road, the 2 Kilometer Parking Area, and the Top of Moose Mountain Road — with total new disturbances of approximately 0.429 hectares across the sites. This includes conducting field validation of proposed improvements, refining designs based on ground conditions, constructability, environmental constraints, regulatory compliance, traffic flow, parking functionality, and operational needs, all while adhering to approved disturbance limits unless additional approval is obtained from Alberta Forestry and Parks. The Consultant must apply proven non-urban park design practices throughout all project phases, from assessment and conceptual design through detailed design, regulatory approvals, tender documentation, construction administration, and final project close-out. The work requires full engineering and design services to deliver safe, efficient, and environmentally responsible parking infrastructure upgrades, including improved traffic circulation, vehicle movement, and site access. The project must be initiated within five business days after contract execution and completed by February 28, 2028, with all design, approvals, and construction oversight delivered on schedule. The locations are precisely defined by geographic coordinates, and the Consultant must work closely with the Province to ensure alignment with all regulatory, environmental, and operational expectations. The project is managed by Alberta Forestry and Parks, with Monica Purewal serving as the primary point of contact, and the solicitation number AB-2026-05557 governs all aspects of engagement.

Forestry and Parks

POSTED

about 21 hours ago

DEADLINE

Design Phase – Bus Wash RehabilitationThe contract seeks the development of comprehensive design documentation for bus wash and steam-cleaning systems as part of a rehabilitation effort, requiring detailed concept designs, construction drawings, and technical specifications to support full implementation. The work is classified under NAICS code 541330, indicating engineering services, and is structured as a subcontract under the Georgia Transportation Efficiency Authority, with responses due by September 24, 2026. The project emphasizes precision in system design to ensure operational efficiency, durability, and compliance with facility requirements for bus maintenance infrastructure. All deliverables must align with industry standards and be tailored for use within Georgia’s transportation maintenance facilities, though specific performance locations and contact details are not provided. The solicitation was posted on August 6, 2026, and interested parties must submit proposals through the designated state portal by the deadline.

Georgia Transportation Efficiency Authority

POSTED

about 22 hours ago

DEADLINE

in about 2 months

26-0088-2 Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction

Solicitation # PE-77548-NONST-2027-000000401

Chatham County is soliciting proposals from qualified consulting firms to provide professional engineering services for pavement and drainage improvements along Wahlstrom Road and Forbes Road, aiming to resolve existing drainage issues and enhance the structural integrity of the roadway. The project requires a comprehensive evaluation of the current pavement conditions and the development of targeted recommendations for resurfacing and structural upgrades capable of supporting the high volume of heavy truck traffic alongside regular passenger vehicles. The selected firm must assess existing infrastructure, identify deficiencies, and propose durable solutions that extend the service life of the roads while improving overall performance and safety. The solicitation, titled Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction with number PE-77548-NONST-2027-000000401, was posted on August 6, 2026, with a response deadline of September 8, 2026. The work is to be performed within Chatham County, Georgia, and the procurement is conducted under the state’s SLED agency framework. Interested firms should submit their proposals by the stated deadline, with all inquiries directed to Sabrina Tippett at stippet@chathamcounty.org. The opportunity is open to qualified vendors with demonstrated expertise in roadway design, pavement analysis, and drainage system engineering.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Engineering and Regulatory ComplianceThe contract entails the preparation of PE-stamped engineering drawings and the full spectrum of permitting and regulatory compliance activities required for projects in Maui County, adhering strictly to the Uniform Development Code, NFPA standards, API specifications, and all applicable local ordinances. This subcontract requires expert knowledge of regional regulatory frameworks and the ability to navigate the permitting process efficiently to ensure projects meet all technical, safety, and legal requirements. The work must be executed by qualified professionals capable of producing stamped documentation that satisfies both state and county authorities. All deliverables must be completed by the response deadline of August 27, 2026, and the contract is classified under NAICS code 541330 for architectural, engineering, and related services. The contracting entity is the County of Maui in Hawaii, with no specific set-aside provisions indicated. Performance of the work is expected to occur within Maui County, and while no point of contact is listed, bidders must submit responses through the official public procurement portal prior to the deadline to be considered.

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Same awarding agency

Project Supervision and Government LiaisonThis contract requires on-site supervision and continuous coordination with the Veterans Affairs Contracting Officer’s Representative and Assistant Contracting Officer’s Representative to ensure full compliance, accurate reporting, and seamless execution of project activities. The work is centered in Waco, Texas, with the prime focus on maintaining alignment with federal standards and delivering services that meet or exceed government expectations through direct, daily engagement with VA representatives. The contract is designated as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, specifically classified under NAICS code 541611, indicating it involves administrative management and general management services. It is open exclusively to eligible SDVOSBs as defined by FAR 19.14, and responses must be submitted by August 20, 2026, with the opportunity posted on August 6, 2026. The contracting office is the 257-NETWORK Contract Office 17 (36C257) under the Department of Veterans Affairs, and potential offerors must be prepared to operate in a highly regulated, compliance-driven environment with immediate access to government personnel for real-time issue resolution and performance tracking.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

ICRA Compliance and Infection Control ManagementThe contract entails the implementation and oversight of Type C/Class IV Infection Control Risk Assessment protocols for construction activities within an occupied medical facility, ensuring strict adherence to infection prevention standards to safeguard patients, staff, and visitors. The scope requires specialized expertise in managing airborne and cross-contamination risks during renovation or construction, including the installation and maintenance of temporary barriers, air pressure controls, dust containment systems, and rigorous cleaning protocols in compliance with healthcare environment regulations. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, classified under NAICS code 541620, indicating services related to management consulting and environmental health and safety consulting. The work is to be performed at a Veterans Affairs facility located in Waco, Texas, with a response deadline of August 20, 2026. The contracting office is the 257-NETWORK Contract Office 17 under the Department of Veterans Affairs, emphasizing the need for proven experience in federal healthcare construction environments and a demonstrated ability to coordinate with clinical teams while maintaining zero tolerance for infection breaches.

Environmental Consulting Services

POSTED

DEADLINE

Fire Alarm Installation and IntegrationThe contract entails the full installation, wiring, programming, and integration of a temporary fire alarm system within Building 7, with mandatory coordination with existing life safety systems to ensure seamless operation and regulatory compliance. All work must be executed to meet applicable fire safety standards and must be completed without disrupting ongoing operations in the facility. The task requires technical expertise in fire alarm networks, system interoperability, and adherence to life safety codes, with emphasis on timely execution and minimal interference with current infrastructure. The subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, and is classified under NAICS code 238220 for electrical contractors and related work. Proposals must be submitted by the stated deadline, and performance is expected to occur at the specified location in Waco, Texas, with a zip code of 76711. The procurement is managed by the Department of Veterans Affairs through the 257-NETWORK Contract Office 17, reflecting the federal commitment to supporting veteran-owned enterprises in mission-critical infrastructure projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Fire Alarm Equipment SupplyThis contract is for the supply of UL-listed fire alarm components including control panels, detectors, pull stations, notification appliances, and associated wiring, all intended for installation at a designated location in Waco, Texas, with a ZIP code of 76711. The solicitation is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, ensuring eligibility and preference for businesses owned and controlled by service-disabled veterans, in accordance with FAR 19.14 provisions. The North American Industry Classification System code for this procurement is 423610, indicating it falls under the wholesale trade of building materials and supplies. The opportunity was posted on August 6, 2026, with a firm deadline for responses set for August 20, 2026, at 6:00 p.m. The contracting office is the 257-NETWORK Contract Office 17 under the Department of Veterans Affairs, emphasizing the federal nature of this procurement and its alignment with VA infrastructure and safety standards.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Full-Service Warranty and Maintenance SupportThe contract requires the provision of a minimum one-year full-service warranty for the ARC-EX Stimulator system, encompassing all parts, labor, and software updates necessary to maintain optimal system performance. This includes comprehensive repair services and ongoing technical support to ensure uninterrupted operation, with all work performed to meet established quality and reliability standards. The warranty must be fully managed by the contractor and must cover the entire system as delivered, with no exclusions for components or functions. This subcontract is issued under the Department of Veterans Affairs, specifically through the 257-NETWORK Contract Office 17, with performance required at a location in San Antonio, Texas, 78229. The opportunity was posted on August 6, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 811211 indicates the scope falls under medical and dental equipment and supplies repair and maintenance services. The contract does not specify a set-aside type or point of contact, and all bids must align with the requirements outlined for continuous support and service delivery throughout the warranty period.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Medical Equipment Installation, Setup, and Training ServicesThe contract requires onsite delivery, installation, setup, and comprehensive training for clinical staff at the VA medical facility in San Antonio, Texas, focused on the ARC-EX Stimulator system. All services must be performed directly at the facility to ensure proper integration of the equipment into existing clinical workflows, with training tailored to the operational needs of the medical personnel who will use the device daily. The work is classified under NAICS code 541690, indicating it involves other professional, scientific, and technical services, and is structured as a subcontract under the Department of Veterans Affairs’ 257-NETWORK Contract Office 17. The solicitation was posted on August 6, 2026, with a response deadline of August 10, 2026, requiring interested parties to submit proposals within this narrow window. The place of performance is definitively set at the San Antonio location with zip code 78229, and all activities must be completed on site without remote or offsite alternatives. The contract does not specify any set-asides or additional sourcing preferences, and while no point of contact is listed, the full details and submission requirements are accessible through the provided SAM.gov link. Success will depend on timely execution, demonstrable technical expertise with the ARC-EX Stimulator, and proven ability to train clinical staff effectively under VA protocols.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of ARC-EX Stimulator Medical Device SystemThe contract pertains to the supply of a complete ARC-EX Stimulator system designed for transcutaneous spinal stimulation, encompassing the stimulation unit, compatible electrode sets, a programming interface, and all necessary accessories. The scope includes delivery to the designated location in San Antonio, Texas, with installation and comprehensive training provided to ensure proper operational use by personnel. A minimum one-year warranty is guaranteed for the entire system, covering defects in materials and workmanship. The system is classified under NAICS code 334510, indicating it is a medical device intended for therapeutic use, and the procurement is structured as a subcontract under the Department of Veterans Affairs, managed by the 257-NETWORK Contract Office 17. Proposals must be submitted by August 10, 2026, and the performance location is finalized at the 78229 zip code in San Antonio.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Bldg. 7 Temporary Fire Alarm System Installation (CTX)

Solicitation # 36C25726Q0793

Doris Miller VAMC is seeking a Service-Disabled Veteran-Owned Small Business to provide comprehensive services for the installation of a temporary fire alarm system in Building 7, including all labor, materials, equipment, and supervision necessary to furnish, install, program, and test the system. The work is tied to Contract Number 36C25726Q0793, issued under a set-aside specifically reserved for SDVOSBs in accordance with FAR 19.14, ensuring priority consideration for qualifying small businesses owned and controlled by service-disabled veterans. The solicitation, posted on August 6, 2026, requires proposals to be submitted by August 20, 2026, and is classified as a combined solicitation, meaning it may involve both commercial and non-commercial items under a single procurement. The North American Industry Classification System code for this effort is 561621, indicating it falls under facilities support services. Performance of the work is to be conducted at Building 7 in Waco, Texas, 76711, while the contracting office is located in San Antonio, Texas, under the Department of Veterans Affairs, Network Contract Office 17. All inquiries should be directed to Marcellus Jackson, the primary point of contact, via email or phone provided in the solicitation. The full technical requirements, including specifications and attachments referenced in the description, must be reviewed prior to submission.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

6530--NEW - Furniture: LOPC Pods

Solicitation # 36C25726Q0690

This solicitation, numbered 36C25726Q0690, is a request for quotation (RFQ) issued by the Department of Veterans Affairs, Network Contracting Office 17, for the supply of office furniture specifically designated as LOPC Pods under NAICS code 337214. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), and only vendors certified as such in the SBA’s database and registered in SAM with the correct NAICS code are eligible to respond. The contract follows the Revolutionary FAR Overhaul (RFO) under FAR subpart 12.202, utilizing streamlined commercial item procedures, and is structured as a firm-fixed-price award based on a Lowest Price, Technically Acceptable (LPTA) evaluation methodology. Offers must be submitted electronically via email to Susan Flores at Susan.flores2@va.gov by 10:00 AM CST on August 11, 2026, with a strict aggregate file size limit of 25 MB; submissions via fax or hard copy will be rejected outright. The required documentation includes a fully completed Standard Form SF-1449, a detailed price schedule with manufacturer part numbers, evidence of technical compliance with the Statement of Work, product literature, side-by-side comparisons for any “equal” items, and warranty information. Performance is to be delivered to the Laredo Outpatient Clinic in Laredo, Texas, under FOB Destination terms, with all items required to be delivered within 90 days after receipt of order. Acceptance will occur at the delivery site by the Contracting Officer’s Representative, and compliance with salient characteristics outlined in the Statement of Work, VAAR and FAR provisions, and Buy American requirements is mandatory. All invoices must be submitted electronically through the Tungsten Network, as mandated by VAAR 852.232-72, and payments will be processed via Electronic Funds Transfer. The contract includes specific clauses addressing whistleblower rights, contractor ethics, subcontracting limitations for SDVOSBs, DEI discrimination prohibitions, option periods for service extension, and requirements for maintaining current SAM registration. Offerors must self-certify their SDVOSB status, comply with limitations on subcontracting, and provide all certifications and representations as required under FAR 52.212-3 and 52.219-1, with non-compliance

Office Furniture (except Wood) Manufacturing

POSTED

DEADLINE

6515--ARC-EX Stimulator for Transcutaneous Spinal Stimulation

Solicitation # 36C25726Q0767

The Department of Veterans Affairs through the Network Contracting Office 17 VHA Regional Procurement Office-West is seeking information from potential vendors to support the future procurement of the ARC-EX Stimulator for Transcutaneous Spinal Stimulation for use by the Spinal Cord Service Line at the San Antonio Veterans Health Care System. The device is required to deliver non-invasive, targeted electrical stimulation through surface electrodes placed on the back of the neck to improve hand and upper extremity strength and sensation in Veterans with chronic incomplete cervical spinal cord injuries. The system must include a stimulation unit, electrode sets, a programming interface, and all necessary accessories and be capable of modulating sensorimotor pathways. The equipment must come with a minimum one-year full-service warranty and pass all acceptance testing prior to delivery. Full installation and setup of the device must be completed by the contractor at no additional cost to the government within one day of delivery, with coordination handled through the assigned Contracting Officer’s Representative. Vendors are required to respond to this source sought notice by 10:00 AM Central Time on Monday, July 20, 2026, and must provide detailed information including their business name, address, point of contact, SAM UID, NAICS code, business size classification, and type of ownership such as Service-Disabled Veteran Owned Small Business, Veteran Owned Small Business, or other eligible small business categories. Proof of authorization from the original equipment manufacturer is mandatory, and gray market items are not acceptable. Responses must also include the country of manufacture, with a strong preference for U.S.-made products, and any existing GSA or VA Federal Supply Schedule contract numbers. Estimated market pricing must be submitted to inform the procurement strategy, including potential set-asides for small or veteran-owned businesses. This notice is purely for market research purposes and not a solicitation for bids, but vendors may submit capability statements or quotations to assist the government in determining whether to proceed with a sole source award or open competition. All submissions should be sent to Michelle Cunningham at michelle.cunningham@va.gov.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

6550--NEW - VISN 17 Urinalysis CPRR IDIQ

Solicitation # 36C25726Q0480

The solicitation for 6550--NEW - VISN 17 Urinalysis CPRR IDIQ, identified by solicitation number 36C25726Q0480, was issued by the Department of Veterans Affairs through Network Contracting Office 17 in San Antonio, Texas, with performance required across all VISN 17 locations, primarily in Arlington, Texas. The procurement is structured as an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to provide comprehensive urinalysis testing supplies and services on a cost-per-reportable-result basis, encompassing equipment, reagents, controls, calibrators, consumables, shipping, maintenance, labor, training, and replacement parts. The contract includes five one-year ordering periods from February 1, 2027, through January 31, 2032, with deliveries governed by FOB Destination terms and a maximum 30-working-day lead time for standard orders. The Statement of Work mandates FDA-cleared assays and instruments, compliance with CLIA and CLSI standards, and specific performance capabilities including urine chemistry analysis for twelve parameters, microscopic identification of thirteen sediment particles with subclassification of casts and crystals, and automated body fluid analysis across multiple specimen types. Technical evaluation is conducted under a Lowest Price Technically Acceptable approach, with mandatory pass/fail gates requiring FDA clearance, full adherence to SOW requirements, stable calibrations per CAP standards, barcoded inventory tracking, minimal shipment delays, on-site service Monday through Friday 8 AM to 5 PM Central Time, 24/7/365 hotline support, and compliance with accreditation and validation protocols, including precision, accuracy, linearity, and method comparison studies—all performed at no cost to the government. The solicitation is unrestricted and utilizes NAICS code 334516 with a 1,000-employee size standard, requiring all offerors to be registered in SAM.gov and to submit completed FAR and VAAR provisions, including representations on trade agreements, trafficking in persons, cybersecurity, and prohibitions on internal confidentiality agreements. Contractors must provide a dedicated project manager and maintain required insurance coverage, including $500,000 general liability (without asbestos exclusions), $100,000 employer’s liability, $200,000 per person automobile liability, and adherence to workers’ compensation laws. Invoicing is mandatory through electronic submission via

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Equipment Tagging and Status Tracking System Support

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE