Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TERMINAL JUNCTION B

Active
SPE4A7-26-T-630YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as TERMINAL JUNCTION B under solicitation SPE4A7-26-T-630Y, requires the delivery of one unit of NSN 5940-01-536-2769 with strict compliance to multiple technical, quality, and packaging standards set forth by the Defense Logistics Agency. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. All packaging and preservation must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking codes applied. The item must be palletized per RP001 and shipped by the fastest traceable means—parcel post is prohibited—and delivered to USS JASON DUNHAM DDG 109 at FPO AE 09567. Mercury and mercury-containing compounds are strictly prohibited in all materials, packaging, and coatings except for defined functional uses such as batteries, sensors, or instruments specified by NAVSEA, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Technical and quality requirements referenced by R or I numbers must be accessed via the DLA Master List, and deviations or waivers must be formally requested through approved procedures. The contract mandates configuration change management and removal of government identification from non-accepted supplies, and all documentation must align with the DLA’s authorized unit of issue system. The delivery is tied to a specific project and requires shipment via the VSM system with RDD 777, and the original required delivery date is August 3, 2026.

General Info

Deliver one NSN 5940-01-536-2769 unit FOB destination by August 3, 2026, per MIL-STD and DLA requirements with zero defects, no mercury, and traceable shipping.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

UNIT 100336 BOX 1, FPO, AE, 09567, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-630Y Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
RICHARD ELLERY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TERMINAL JUNCTION B
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
AERCO INTERNATIONAL, INC. 95368 P/N 124697
AERCO INTERNATIONAL, INC. 95368 P/N 161627 ITEM 3
SCHNEIDER ELECTRIC USA, INC. 56365 P/N 9080LBA163104
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A7-26-T-630Y
SECTION B
PR: 7017744468 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744468 0001 EA 1.000
NSN/MATERIAL:5940015362769
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:BG CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
V55685
USS JASON DUNHAM DDG 109
UNIT 100336 BOX 1
FPO AE 09567
FPO AE 09567-1303
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V55685
USS JASON DUNHAM DDG 109
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE4A7-26-T-630Y
SECTION B
PR: 7017744468 PRLI: 0001 CONT’D
M/F: (TCN) V556856211EE45
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNEE02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A7-26-T-630Y NSN/Part Number: 5940-01-536-2769 Quantity: 1 EA Purchase Request: 7017744468QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Sustainable and Mercury-Free Product SourcingThe contract mandates the supply of electronic components that are free of mercury and fully compliant with RoHS standards, aligning with sustainable procurement requirements outlined in FAR 23.23. All delivered products must meet strict environmental specifications to ensure they support federal sustainability goals while maintaining high technical performance. The work is classified as a subcontract under NAICS code 335999 and is being procured by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance requirements centered at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. Proposals must be submitted by the deadline of August 20, 2026, following the posting date of August 9, 2026. There is no set-aside classification specified, and the contract does not indicate any preference for small businesses or specific socioeconomic categories. The solicitation is accessible through the DIBBS platform under reference number SPE7MC26T187G, and vendors are expected to demonstrate full compliance with environmental regulations and supply chain transparency to qualify for award.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-635J
This contract pertains to the procurement of electrical insulation tape designated as a commercial item with a 12-month shelf life, extendable under RS055 requirements. The item is classified as a critical application product and must comply with Technical Data Package Revision B, Gen 3, in accordance with CID A-A-59474D Revision D dated 01/23/2024, with the part number AA59474 TY1 CL4 1W and NSN 5970010124280. All packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special shelf life labeling code 33, and prohibit any mercury or mercury compounds in preservation materials. Packaging must follow DLA’s RP001 requirements, with units delivered in 36-yard rolls, palletized appropriately, and marked for government use with DNO005 as the freight forwarder and DNOX00 as the delivery destination in Kjeller, Norway. The item is supplied in a unit of issue of RO (roll), with a total quantity of two rolls, and delivery is required FOB origin within five days of award, with zero variance permitted in quantity. Inspection and acceptance occur at origin, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications. The solicitation number is SPE4A7-26-T-635J, with a required delivery date of August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with James Sinks as the point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4673
The contract specifies the procurement of a commercial power supply unit identified by part number NXA-PAC-650W-PI and NSN 6130017080939, sourced from Cisco Systems Inc., with strict adherence to the source-controlled drawing numbered 53711 8563458 Revision C dated 07/12/2018. Only approved sources listed on the drawing may be used, and any alternative product must meet all technical specifications outlined in the drawing regardless of part number. The item is subject to multiple technical and quality requirements referenced from the DLA Master List, and sampling must comply with MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively, with no special marking required. Palleteization and packaging must conform to DLA’s procurement standards, and the unit of issue is each (EA). The contract mandates delivery to the designated warehouse in Tracy, CA, with FOB origin terms, a 261-day delivery window, and a required ship date of May 9, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at destination, and the item is classified as a commercial item. All obligations are governed by the contract’s referenced DLA procedures and technical directives.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A7-26-T-631Q
The contract pertains to the procurement of electrical insulation sleeving, specifically classified as white, Class 200, Type D, Category C, with a unit of issue as each (EA) and a length requirement between 30.000 and 42.000 inches minimum to maximum. The item is identified as a commercial item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including QPL/QML qualification criteria, meaning only components sourced from qualified manufacturers on approved lists are acceptable. The product must not contain intentionally added mercury or mercury compounds except in specific functional applications such as batteries, fluorescent lamps, sensors, or controlled instruments as permitted under NAVSEA guidelines, and any portable devices containing mercury must be shockproof with a secondary containment barrier. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements (RP001), with hazardous material packaging governed by Fed-Std-313 and IP025 if applicable, otherwise commercial packaging per ASTM D3951 is acceptable, though DLA requirements override ASTM. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and unspecified attributes are treated as major. The item, identified by NSN 5970012529444, is subject to a firm fixed quantity of 226 units with no tolerance for variance, delivered FOB origin within 58 days, with destination inspection and acceptance. All shipments must be palletized per DLA standards and directed to the specified delivery point at DLA Distribution Cherry Point, North Carolina. The contract was solicited under SPE4A7-26-T-631Q with a response deadline of August 17, 2026, and the original required delivery date is February 14, 2027, with a need ship date of August 4, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE7M2-26-T-6180
This contract pertains to the procurement of electrical insulation sleeving identified by NSN 5970009541624 and part number M23053/5-107-0, compliant with SAE AS23053C Revision C dated November 1, 2023, and conforming to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is classified as a commercial item and a critical application item, requiring strict adherence to configuration control, engineering change proposals, and deviation requests. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional uses in batteries, instruments, sensors, weapon systems, or authorized chemical reagents, with portable devices containing mercury mandated to have shockproof construction and secondary containment per NAVSEA 5100-003D. The product must be free from Class I ozone-depleting chemicals and packaging must comply with MIL-STD-2073-1E, including specified padding, wrapping, and packaging methods. Item Unique Identification is not required per the Service customer’s request, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance. Components must be sourced from qualified manufacturers listed in approved QPL or QML databases. Packaging and marking must conform to MIL-STD-129 and DLA packaging requirements, with no special marking required. The contract calls for a total quantity of 25,530 feet to be delivered FOB origin within 105 days, with a permissible quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the destination. The unit of issue is feet, and pricing is fixed at the line item level. All delivery documentation, labeling, and palletization must align with DLA and military standards, and the supplier must ensure full compliance with covered defense information requirements if applicable. The contracting activity is under the Department of Defense, Nuclear Reactor Program, with the place of performance specified at Tinker AFB, Oklahoma. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the NAICS code is 335999. The primary point of contact for the acquisition is Kevin Erickson, with contact details provided for inquiries and correspondence.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4667
The contract pertains to the procurement of 12 units of a power supply identified by NSN 6130015986813, with a delivery requirement of 60 days from the award date, delivered FOB origin. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging must adhere to DLA’s official packaging guidelines, including specific methods for preservation, wrapping, and containerization, using unit containers D3 and intermediate containers E5 with no cushioning material. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination point with zero tolerance for quantity variance. The power supply is designated as a critical application item, subject to strict verification standards, including zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with critical attributes inspected at Level VII or AQL 0.1. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The contract is issued under solicitation SPE7L7-26-T-4667 with a response deadline of August 20, 2026, and the original required delivery date is February 8, 2027. The contractor must comply with defense information protocols and the applicable unit of issue as defined by DLA standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M0-26-T-034W
The contract pertains to the procurement of a single unit of a strip for electrical grounding with NSN 5999-01-588-3447, issued under solicitation SPE7M0-26-T-034W by the Department of Defense’s Maritime Supply Chain ESOC Buys. The item must be delivered within five days of award, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers incorporated into the solicitation. For simplified acquisitions, the version of the master list in effect on either the solicitation issue date or award date applies, while for larger acquisitions, the RFP issue date version controls unless an amendment introduces a later revision. The supplier must comply with DLA packaging requirements and ensure physical identification and marking of the bare item, and must also remove any government identification from non-accepted supplies. No data package is currently available, so the offeror is required to submit complete technical and quality data for both the approved and alternate parts. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is Cabot, Arkansas, 72023-4101. Primary point of contact is Gerard Quinn, reachable via email and phone provided.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7L1-26-T-946V
The contract pertains to the procurement of electrical insulation sleeving designed to serve as a boot, dust, and moisture seal, identified by NSN 5340-01-190-5915, with a total quantity of 2,605 units required for delivery within 165 days after order. The solicitation, numbered SPE7L1-26-T-946V, is a total small business set-aside under FAR 19.5, with a NAICS code of 335999, and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must comply with strict environmental standards, prohibiting the use of Class I ozone-depleting chemicals, and any substitute materials require prior approval. Technical data associated with this item is subject to export controls under ITAR or EAR, necessitating compliance with DFARS 252.225-7048; access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. Additionally, government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. The contract is secured under CMMC Level 2 certification requirements for the third-party assessment organization, and covered defense information is applicable. Delivery is targeted to New Cumberland, PA, with primary point of contact information provided for procedural inquiries.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, STANDOFF
Solicitation # SPE4A5-26-T-336M
The contract is for the procurement of 17 units of an insulator, standoff, part number 477301-001, manufactured by Simmonds Precision Products Inc, with NSN 5970-01-498-4236. This is a critical application item governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The item is classified as a non-hazardous material and must be commercially packaged per ASTM D3951 unless otherwise directed by DLA requirements, with all packaging and labeling compliant with MIL-STD-129. All packaging must adhere to RP001 DLA Packaging Requirements for Procurement, and palletization must conform to the same. The item is exempt from Unique Identification under DFARS 252.211-7003(c)(1)(i), and physical marking must comply with RQ017. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified. Attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The contract specifies a delivery deadline of 166 days from award, with FOB origin and inspection and acceptance occurring at destination. The unit of issue is EA, quantity is strictly 17 with no variance allowed. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, CA. The contract was solicited under SPE4A5-26-T-336M, with a response deadline of August 17, 2026, and a required ship date of January 31, 2027. All documentation, including source approval requests and handling of covered defense information, must comply with RC001 and RD003. Measuring and test equipment used must meet RT001 requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
BATTERY, JUMP START
Solicitation # SPE7L7-26-T-4665
This contract specifies the procurement of a jump-start battery with AGM chemistry, subject to a non-extendable 24-month shelf life designated as Type I. The item is classified as a commercial item and must comply with stringent packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special labeling for Type I shelf life. All packaging and handling must adhere to DLA packaging requirements and hazardous materials directives, prohibiting intentional addition of mercury or mercury compounds except in functional applications like batteries, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise specified. The battery is identified by NSN 6130-01-618-0951 and part number 746X705, supplied by PULSETECH PRODUCTS CORPORATION, with a verified unit price of $11.00 per unit for a total of 11 units. Delivery is required FOB origin within 86 days of contract award, with inspection and acceptance occurring at destination. The shipment must be sent to the designated DLA warehouse in Tracy, CA, following specified freight and transportation protocols, and must be delivered no later than November 15, 2026. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the contract is subject to federal acquisition regulations including those related to covered defense information and hazardous communication standards.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INVERTER, POWER, STAT
Solicitation # SPE7L7-26-T-4671
The contract pertains to the procurement of five static power inverters with part number ML1000-24 and NSN 6130-01-737-3545, supplied by BRIGHT MANUFACTURING LLC under solicitation SPE7L7-26-T-4671. Delivery is required FOB origin with a strict quantity variance of plus or minus zero percent, and full acceptance must occur at the destination point. The items must be packaged per ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Packaging and palletization must comply with DLA packaging standards, and all units must be physically marked according to RQ017. Sampling inspection follows MIL-STD-1916 or a comparable zero-based plan, with specified critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required in sample lots unless otherwise stated. The delivery deadline is 269 days from contract award, with an original required ship date of May 17, 2027. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, and transportation procedures must follow DLAD Proc Notes C19 and C20. The unit price is $5.00 per unit, totaling $25.00 for the full quantity. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under the DoD authorized unit of issue, with procurement managed under NAICS code 335999 and administered by the Department of Defense through the DLA New Cumberland facility, with Michael Francis as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A7-26-T-630Z
The contract pertains to the procurement of one Installation Kit, Electronic Equipment with NSN 5895-01-677-7173 and part number 02-2856383-1, to be delivered in a single unit within ten days of contract award, with delivery terms set at FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, and must be strictly followed. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, while palletization adheres to RP001 specifications. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Inspection and acceptance occur at the destination, with the delivery point being US Army SSA Powidz AB, Poland, and the freight shipping address matching the delivery location. The contract is governed under solicitation SPE4A7-26-T-630Z, with a required delivery date of August 3, 2026, and the unit of issue is each, with no variance permitted in quantity. Compliance with DLA procedures for transportation, marking, and documentation is mandatory, and the contract includes specific government-use identification codes and contact information for procurement inquiries.
Other Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details