Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TERMINAL JUNCTION BLOC

Active
SPE7M2-26-T-6195Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of Terminal Junction Blocks, Sectional, identified by NSN 5940-01-185-7564 and part number M81714/61-0Z, with a quantity of 142 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timing. Compliance with SAE AS81714D Revision D dated 11/01/2021 and related specifications is mandatory, and the product must adhere to TDP Rev B Gen 3 standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. The item is subject to the Qualified Products List or Qualified Manufacturers List, and all supplies must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must follow DLA’s procurement requirements and palletization standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a strict quantity tolerance of plus or minus 0 percent applies. The required delivery date is July 1, 2027, with a scheduled ship date of March 22, 2027, and delivery must occur within 212 days of award. The consignee is DLA Distribution at the New Cumberland, PA facility, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7M2-26-T-6195 with a response deadline of August 21, 2026, and was posted on August 10, 2026, managed by the Department of Defense under NAICS code 335999.

General Info

Procure 142 M81714/61-0Z terminal blocks to DLA New Cumberland by July 1, 2027, per SAE AS81714D and MIL-STD standards.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-6195.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
LANCE SON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TERMINAL JUNCTION BLOCK,SECTIONAL
TERMINAL, JUNCTION BLOCK, SECTIONAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev B Gen 3 IAW BASIC NON GOVT STD SAE AS81714/61 REVISION NR C DTD 01/31/2020 PART PIECE NUMBER: M81714/61-0Z
TDP Rev B Gen 3 IAW REFERENCE UNK QPL-AS81714-1 NOT 1 REVISION NR 1 DTD 01/29/2009 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE NON GOVT STD SAE AS81714D REVISION NR D DTD 11/01/2021 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE NON GOVT STD SAE AS81714-A2
SPE7M2-26-T-6195
SECTION B
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438681 0001 EA 142.000
NSN/MATERIAL:5940011857564
DELIVERY (IN DAYS):0212
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7M2-26-T-6195
SECTION B
PR: 7017438681 PRLI: 0001 CONT’D
Need Ship Date:03/22/2027 Original Required Delivery Date:07/01/2027
SPE7M2-26-T-6195 NSN/Part Number: 5940-01-185-7564 Quantity: 142 EA Purchase Request: 7017438681QTY: 142 Delivery: 212 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
HEADLIGHT
Solicitation # SPE4A6-26-T-14RU
This contract pertains to the procurement of a single headlight unit, identified by NSN 6220017223176 and part number 628-6039, supplied by John Bean Technologies Corp or Oshkosh Aerotech, LLC. The item is classified as a critical application item with no shelf life requirement, and unique identification is not mandated per the service customer’s request under DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required for acceptance unless contract exceptions apply. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including labeling per MIL-STD-129 with a fragile marking code and proper palletization. Delivery is due within 20 days FOB origin to the Navy Expeditionary Logistics Support Group in Williamsburg, VA, with no quantity variance permitted. The item must be shipped via fastest traceable means—parcel post is prohibited. Inspection and acceptance occur at the destination, with the original required delivery date set for May 22, 2026. The contract is issued under SPE4A6-26-T-14RU and incorporates all referenced technical and quality requirements from the DLA Master List, including documentation, marking, and packaging standards.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATING COMPOUND KI
Solicitation # SPE4A6-26-T-14RY
This contract pertains to the procurement of an electrical insulating compound kit, identified as a commercial off-the-shelf item with the NSN 5970-00-752-5430 and part number SCOTCHCAST 4N SIZE C by 3M Company. The kit is packaged as a single box containing ten individual two-part bags, each holding 14.6 ounces of insulating compound, with a minimum purchase requirement of one box. The item has a non-extendable shelf life of 24 months, classified as Type I with a shelf-life code M, and must be preserved and packaged according to MIL-STD-2073-1E, Appendix D, for kits. Packaging and marking must comply with MIL-STD-129, including barcoding and labeling with special marking code 32 indicating shelf-life compliance, and each box must include a detailed contents list of component NSNs, part numbers, and quantities. The contract imposes strict adherence to hazardous material handling standards, prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for specific functional uses in batteries, lights, instruments, sensors, controls, weapon systems, or naval chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Safety data sheets and OSHA-compliant hazard warning labels are mandatory and require prior review and approval by technical personnel, with approved copies submitted to the DLA Aviation HMIRS office. Sampling must follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is FOB destination within five days, with no variance allowed in quantity, and the destination is NAVSUP FLC Yokosuka Sasebo Office in Sasebo, Japan. The item is subject to DLA packaging, hazardous materials shipping, and government-specific marking requirements, with the point of contact and procurement details provided for administrative and logistical coordination.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4677
This contract outlines the procurement of a single power supply unit with NSN 6130016261477 and part number PS125 from RGB Systems Inc under solicitation SPE7L7-26-T-4677. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, while unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications like batteries, fluorescent lamps, sensors, or naval-recommended reagents, and any portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special markings required, and palletization must meet DLA’s packaging guidelines. The item is to be delivered FOB origin within 20 days to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with inspection and acceptance occurring at destination. The quantity is fixed at one unit with zero variance allowed, and the required delivery date is August 4, 2026. Transportation and shipping details reference DLA procedural notes C19 and C20, and the contract mandates use of the government's authorized unit of issue. Contact for inquiries is Maria Blaney of the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L1-26-T-949J
The contract pertains to the procurement of five RETAINER, PACKING, RING, GLAND, STUFFING items under NSN 5330-01-286-7485, with a delivery requirement of five days ADO. The item is designated as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, specifying a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Identification marking must adhere to MIL-STD-130N, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The contract falls under NAICS code 335999, is managed by the Department of Defense’s Land Supply Chain, and has a solicitation number SPE7L1-26-T-949J with a response deadline of August 21, 2026. Point of contact is Kristina Derry, reachable via email or phone listed.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-636Y
Electrical insulation tape, identified by NSN 5970-01-012-4280, is procured under contract SPE4A7-26-T-636Y across 26 separate line items, with total quantities ranging from one to fifteen roll equivalents, all specified as commercial items with a 12-month shelf life that is extendable. The product must comply strictly with MIL-STD-2073-1E for preservation and packaging, including preservation method 10 for clean and dry storage, with no mercury or mercury compounds permitted in any phase of preservation, packaging, or labeling. Each unit must be marked in accordance with MIL-STD-129, featuring a special code indicating Type II shelf life, and palletized per DLA packaging requirements. Inspection and acceptance occur at origin, with delivery required within five days under FOB destination terms and zero tolerance for quantity variance. The tape is designated as a critical application item and must meet the technical specification TDP Rev B Gen 3 per CID A-A-59474D Revision D dated January 23, 2024. Shipments are directed to multiple Department of Defense locations across the United States and overseas, including facilities in California, Florida, Texas, Alaska, Japan, and Italy, with explicit instructions prohibiting parcel post in favor of traceable freight or vessel transportation. Each delivery includes unique military freight and parcel post addresses, with specific contact information, transportation notes referencing DLAD procedures, and assigned project codes and government use identifiers for tracking and logistics coordination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-14RV
Insulation sleeving, electrical, specified under NSN 5970-01-480-1456 and part number HS5330-1524, is procured in units of EACH, where one unit equals a 1000-foot spool, with a total requirement of 50 units for a total length of 50,000 feet. The contract mandates strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any commercial packaging guidelines such as ASTM D3951. Packaging must comply with MIL-STD-129 for labeling and marking, and palletization must follow RP001 DLA packaging requirements. The material is not classified as hazardous under FED-STD-313, so it must be commercially packaged in accordance with ASTM D3951 unless superseded by the DLA master requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sample lots unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0. The minimum purchase quantity is equivalent to 3700 feet or 44,400 inches, which exceeds the contract’s 50,000-foot requirement. Delivery is due within 10 days of award, FOB origin, with inspection and acceptance occurring at the destination. The item must be shipped to Storck Barracks, Building 6503, Illesheim, Germany, under DLA transport directives C19 and C20. The contract number is SPE4A6-26-T-14RV, with a required delivery date of July 30, 2026, and solicitation response deadline of August 18, 2026. All packaging and marking must reflect the government’s designated unit of issue, and government identification must be removed from non-accepted supplies as of July 1, 2019.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-T-4686
Sealed lead acid battery power supplies are being procured under contract SPE7L7-26-T-4686 with a strict Type I shelf life of 12 months that is non-extendable, and all items must be marked accordingly. The batteries are subject to comprehensive technical and quality requirements referenced from the DLA Master List, with sampling performed per MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise specified. Mercury and mercury-containing compounds are prohibited except in functional applications such as batteries, fluorescent lights, sensors, and weapon systems, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging guidelines, with marking per MIL-STD-129 including the special code 32 for Type I shelf life, and palletization following RP001 standards. Shipments are to be delivered FOB destination within 20 days of contract award, with no variance allowed in quantity, and must be shipped via traceable means only—parcel post is strictly forbidden. Delivery is directed to USS HARPERS FERRY LSD 49 in FPO AP 96665 with an original required delivery date of July 31, 2026. Each unit is identified by NSN 6130016592879, and the contract requires adherence to all defense information handling protocols under RD003, with inspection and acceptance occurring at the destination.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
Federal
Gatan Ancillary Instrument Systems Maintenance Service Agreement
Solicitation # W911QX26QA168
The Gatan Ancillary Instrument Systems Maintenance Service Agreement is a Department of Defense contract solicited under number W911QX26QA168, issued by the W6QK Acc-Apg Adelphi office located in Adelphi, Maryland. The contract aims to secure maintenance services for Gatan ancillary instrument systems, with performance required at Aberdeen Proving Ground in Maryland. It is classified under NAICS code 335999, which covers other electrical equipment and component manufacturing, indicating the technical nature of the services involved. The solicitation, posted on August 10, 2026, requires responses no later than August 17, 2026, and is open as a combined solicitation type, suggesting it may be used for both contract award and order placement under a pre-established agreement. Primary point of contact for inquiries is Jamie N White, reachable via email at jamie.n.white2.civ@army.mil. The Performance Work Statement, essential for understanding the scope of required services, is referenced as attached and must be reviewed by offerors to ensure full compliance with technical and operational expectations.
W6QK Acc-Apg Adelphi

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
Federal
Sources Sought: EIC Quadrupole Magnet Coils
Solicitation # Stek-26-S455088
Thomas Jefferson National Accelerator Facility is seeking input from industry partners regarding the procurement of quadrupole magnet coils for the Electron Ion Collider being constructed at Brookhaven National Laboratory. This sources sought notice, issued under solicitation number Stek-26-S455088, aims to gather early feedback on potential costs, schedules, and technical approaches for magnet coil designs that will be procured either through detailed drawings or technical specifications. The request is designed to refine procurement strategy and documentation before formal RFPs are released, ensuring industry capabilities are fully understood and aligned with project requirements. Responses are due by August 18, 2026, and the solicitation is open to all responsible sources without set-aside restrictions, with NAICS code 335999 applying to other electrical equipment and component manufacturing. The point of contact is Ebony Beaver at Jefferson Lab in Newport News, Virginia, and all correspondence should be directed to her via email or phone provided in the notice.
Jefferson Labor - DOE Contractor

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
Federal
AMPLIFIER RADIO FRE
Solicitation # N0010426QNE30
This contract solicits repairs for 28 units of NSN 5996-015453672, an AMPLIFIER RADIO FRE, with no consideration for new procurement or replacement. The repair must strictly adhere to the contractor’s approved technical standards and the referenced FSB0004528 specification, and all work must comply with MIL-STD-130 Rev N for marking and mercury-free requirements, prohibiting any metallic mercury contamination without explicit prior approval. The Government requires Government-Source Inspection and Acceptance, and the contractor must accurately track asset receipt and repair progress using the Commercial Asset Visibility system, with a mandated turnaround time of 163 days from physical receipt to final Government acceptance. Quotes must include firm-fixed pricing, a Beyond Repair price, repair and packaging CAGE codes, monthly throughput capacity, and confirmation of the item’s obsolete status, submitted exclusively via email to Rachel Kern. The contract includes a 282-day Additional Requirement Option allowing the Government to increase the order by up to 50% at the same unit price. Induction is limited to 120 days post-award, and repairs received after this window require bilateral agreement. Contractors must be authorized distributors of the original manufacturer, with proof submitted at quotation. All documents are subject to distribution restrictions under OPNAVINST 5510.1, and compliance with Buy American, cybersecurity maturity certification, and small business subcontracting requirements is mandatory. The pricing structure is fixed, eliminating Beyond Economical Repair as an option; only Beyond Repair is recognized with DCMA concurrence. The solicitation is issued under emergency acquisition flexibilities, and all contractual instruments are deemed issued upon electronic transmission, with the Government retaining the right to inspect and reject noncompliant items throughout performance and for 365 days after final delivery.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335999
New
SLED
145916 Van Nuys E-hub DC Fast Chargers
Solicitation # 231370
The Los Angeles Department of Water and Power is soliciting bids for the installation of DC fast chargers at the Van Nuys E-hub under solicitation number 231370, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the Electronic Request Solicit Procure system, and hard copy or mail-in bids will not be accepted. The work is located in Los Angeles, California, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The project is managed by the Water & Power agency within the state of California, and inquiries should be directed to Jaimesha Ferrell, the designated point of contact, via email at jaimesha.ferrell@ladwp.com. The opportunity is open to eligible contractors through the RAMP LA platform, where full details and submission guidelines are available through the provided link.
Water & Power

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Supplier of NSN 2815015473601The contract requires the supply of 21 units of military item NSN 2815015473601, identified by PRLI 0001, distributed across four separate contract line item numbers to ensure precise delivery and tracking. All items must fully comply with applicable military specifications and packaging standards to meet operational readiness and logistical requirements. The solicitation is structured as a subcontract under the NAICS code 335999, indicating it pertains to other miscellaneous electrical equipment and component manufacturing. The place of performance is designated as San Diego, California, with a zip code of 92136-5299, suggesting the items will be delivered to a designated Department of Defense facility or logistics hub in that region. The contracting activity is led by the Land Supply Chain under the Department of Defense, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026 through the DIBBS platform.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 331420
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M2-26-T-6196
This contract specifies the procurement of a machine thread plug, identified by NSN 4730-01-732-5637 and part number 6PNTX-SS-QMS from CUSTOM HYDRAULIC & MACHINE, INC., with a quantity of 13 units to be delivered FOB origin within 173 days of contract award. The item is classified as a critical application component and must comply with stringent technical, quality, and packaging standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. No mercury or mercury-containing compounds may be intentionally introduced into the product except for specified functional uses in batteries, lighting, instruments, or weapon systems as authorized by NAVSEA, and any portable devices containing mercury must have shock-proof construction with a secondary containment boundary per NAVSEA 5100-003D. The supplier must adhere to DLA packaging and procurement requirements, including palletization standards, and the item must be delivered to the designated DDSP New Cumberland facility in Pennsylvania with no variance allowed in quantity. The contract prohibits deviations without formal engineering change proposals or variance requests, and all documentation must meet source approval and configuration management protocols. Delivery is required by February 11, 2027, with acceptance occurring at the destination point under inspection requirements.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6197
The contract specifies the procurement of 764 units of screw, cap, hexagon head with NSN 5305-01-575-1782 and part number 0.62511UNC2A1.250T1G2SAN, under solicitation SPE7M2-26-T-6197. Deliveries are required within 164 days of contract award, with shipment originating from the supplier and delivered FOB origin to the DLA Distribution Puget Sound facility in Bremerton, WA. All items must comply with MIL-DTL-1222J for surface marking, requiring the material symbol, manufacturer’s symbol listed in MIL-HDBK-57, and lot number directly applied to the screw, with exceptions for items under half an inch in diameter where space constraints apply; unmarked items must have markings on packaging. The item is classified as a critical application item and must conform to MIL-STD-130N for identification marking. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging standards, including preservation method 10, wrap material DA, and cushioning material JC, with marking per MIL-STD-129 and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and labeling, except for specific exceptions such as batteries, fluorescent lamps, and instrument controls as defined by NAVSEA, with portable fluorescent devices requiring shockproof construction and a secondary containment barrier. The contract stipulates a fixed quantity with zero variance, inspection and acceptance occur at destination, and the delivery must be completed by February 2, 2027, with an original required delivery date of November 6, 2026. The unit price is based on the total contract value, and compliance with all referenced technical and quality requirements listed in the DLA Master List is mandatory.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0733
This contract pertains to the procurement of a restricted-source item identified by NSN 5330-00-786-5492, with a quantity of 14 units, under solicitation SPE7M2-26-Q-0733. The item requires engineering source approval by the government design control activity and must comply with stringent packaging, documentation, and traceability standards set forth in DLA’s Master List of Technical and Quality Requirements. All supplies must adhere to prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; portable mercury-containing items must also meet shock-proof and dual-containment standards per NAVSEA 5100-003D. Item markings must include the contract number, NAWC CAGE code, and part number unless overridden by technical drawings, and all bare items must conform to NAVAIR aircraft launch and recovery equipment traceability requirements. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized DLA approval may access this data. Manufacturing and non-manufacturing entities must hold SAE AS9100 accreditation and meet non-destructive testing (NDT) accreditation requirements. Submission of a First Article Testing Report, Production Test and Inspection Report, and Certificate of Quality Compliance is mandatory, with surplus materials deemed unacceptable. Delivery is due 449 days after award, and all technical data and requirements are governed by the solicitation version in effect on the issue date, with updates controlled by any subsequent amendments. The place of performance is San Diego, CA, with Victoria Payne at DLA as the point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M2-26-T-6192
This contract specifies the procurement of an electromagnetic relay under NSN 5945-01-062-5154 with a quantity of 12 units to be delivered FOB origin within 271 days after award, with a required ship date of May 20, 2027 and an original delivery deadline of August 6, 2027. The item must comply with Technical Data Package Rev A Gen 1 per MIL-DTL-5757/1L and MIL-DTL-5757P Sup 1, and is designated as a Critical Application Item listed on a Qualified Products List or Qualified Manufacturers List. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds in any supplied hardware except for functional applications in batteries, fluorescent lights, specified instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and container codes; all units must be marked in accordance with MIL-STD-129, including a special ZZ code and IPC/JEDEC J-STD-609-compliant lead finish markings on each unit package. Inspection and acceptance occur at destination with zero variance allowed in quantity. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation was issued under SPE7M2-26-T-6192 with a response deadline of August 21, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program, with Alisha Blanton as the primary point of contact.
Relay and Industrial Control Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ROD, ACTUATOR
Solicitation # SPE7M2-26-T-6190
The contract pertains to the procurement of three ROD, ACTUATOR units under solicitation SPE7M2-26-T-6190, with a delivery deadline of 80 days after order. All supplies must comply with stringent technical and quality requirements outlined in the DLA Master List, including inspection and acceptance at origin, zero-defect sampling per MIL-STD-1916 or ASQ H1331, and strict assignment of verification levels based on attribute criticality. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional components such as batteries, sensors, or instruments approved by NAVSEA, and any portable devices containing mercury must include dual containment and be shock-proof per NAVSEA 5100-003D. The item must adhere to NAVAIR traceability standards, with bare parts marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Class I ozone-depleting chemicals are explicitly banned, and any alternative chemicals require prior approval. Technical data associated with this item is subject to export control under ITAR or EAR, restricting access to only DLA contractors with approved JCP certification, completed training, and DLA authorization. Compliance with DFARS 252.225-7048 is mandatory, and distribution to foreign persons, including foreign nationals within the U.S., is strictly controlled. Full and open competition applies, and all requirements supersede any conflicting specification clauses.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6200
This contract is for the procurement of 52 push switches designated by NSN 5930009692683 and associated part numbers from DRS Naval Power Systems Inc and Eaton Corp, categorized as critical application items. The supplies must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lights, instruments, weapon systems, or specified reagents. Mercury-containing portable lamps and instruments must feature shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The items are subject to inspection and acceptance at the destination, with no tolerance for quantity variance. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-28786, with marking following MIL-STD-129 and no special marking required. Palletization shall conform to DLA packaging requirements, and hazardous materials handling must meet IP025 specifications. Delivery is FOB origin with a required delivery date of April 4, 2027, and a shipment deadline of February 26, 2027. All supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under the solicitation SPE7M2-26-T-6200, which was issued on August 10, 2026, with responses due by August 21, 2026. The unit of issue is each (EA), at a fixed price of $52.00 per unit.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE7M2-26-T-6198
This contract, issued under solicitation SPE7M2-26-T-6198, pertains to the procurement of 2,048 rotary cutting tools identified by NSN 3455-00-311-6182, featuring a 0.250 inch shank, 0.375 inch cutter head diameter, 1.0625 inch cutter head length, and 2.8125 inch overall length with 18 to 24 medium-spaced teeth, conforming to Type II, Style D, Size 4, Class B per CID A-A-51186B, Revision A, General 1. All supplies must comply with DLA packaging requirements as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, and adhere to ASTM-D-3951 for packaging, with no special marking required. The product must be free of intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-resistant design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise specified. Delivery is FOB origin with a required delivery date of April 3, 2027, and a need ship date of February 26, 2027, with a 188-day lead time and zero variance in quantity. Inspection and acceptance occur at destination. The item must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, in accordance with DLAD Proc Notes C19 and C20 for transportation and freight.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE7M2-26-T-6191
The contract specifies the procurement of 10 sheets of annealed 304 stainless steel, UNS S30400, with a 2B finish, measuring 36 inches wide, 96 inches long, and 0.050 inch thick, totaling approximately 50.1 pounds per sheet. All material must be supplied in whole-foot increments and conform to ASTM A240/A240M-26, Revision 26. Strict identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are mandated for small diameter bars and tubes under 0.250 inches, while tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special preservation codes ZZ as defined in ASTM A700, and all markings must withstand normal handling without degradation. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for Troop Support are eligible to respond, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and may incur criminal penalties. The product qualifies as a critical application item, and metal certification documentation, including CDRL-METALSCERT, must be furnished. Mercury and mercury-containing compounds are prohibited unless part of functional components like batteries, instruments, or weapon systems, with additional containment requirements per NAVSEA 5100-003D. Delivery is FOB origin with a 164-day lead time, final acceptance at destination, and no quantity variance permitted. Shipments must be addressed to the designated DLA distribution center in Tracy, California, with transportation governed by DLA procedural notes. The NSN is 9515-01-051-9709, and all data must align with the Technical Data Package and procurement note M03.
Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6194
The contract is for the procurement of 1,225 units of screw, cap, hexagon head with NSN 5305-00-050-4212, issued under solicitation number SPE7M2-26-T-6194 by the Department of Defense’s Nuclear Reactor Program. The requirement is fully competitive and governed by applicable military and federal specifications, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. Each screw must be marked with the manufacturer’s symbol directly on its surface, as defined in MIL-HDBK-57, unless the thread diameter is 0.190 inches or smaller, in which case marking is exempt; no markings are permitted on bearing surfaces. The delivery timeline requires fulfillment within 158 days after delivery order, with the place of performance specified as New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with Lance Son listed as the primary point of contact for inquiries regarding the procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M2-26-T-6199
The contract pertains to the procurement of 37 helical compression springs identified by NSN 5360-01-301-1176 under solicitation SPE7M2-26-T-6199, with a response deadline of August 21, 2026, and a delivery requirement within 105 days after award. The acquisition is a total small business set-aside under NAICS code 332613, administered by the Department of Defense’s Nuclear Reactor Program, with performance located in Greensboro, NC. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. Strict prohibitions exist against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. The Government’s identification must be removed from any non-accepted supplies prior to return. Primary point of contact is David Larsen, reachable via email and phone provided.
Spring Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7M2-26-T-6193
The contract is for the procurement of two units of preformed packing with part number 695-00014, sourced from HAGGLUNDS DENISON CORP in MARYSVILLE OH, under NSN 5330-01-274-3262 and purchase request 7017702770, with a delivery requirement of 20 days after award. The solicitation number is SPE7M2-26-T-6193, issued on August 10, 2026, with responses due by August 21, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance is mandatory for all provisions referenced by R or I numbers. The item must adhere to NAVAIR aircraft launch and recovery equipment traceability standards, and bare parts must be marked with the contract number, NAWC CAGE, and part number unless a conflicting drawing specification applies, in which case the drawing takes precedence. The packing must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all materials must meet DLA packaging requirements for procurement. The point of contact is Alisha Blanton, reachable via email and phone, with the place of performance listed as Washington DC.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Shipment Labeling ServicesThe contract requires the provision of military-compliant packaging and preservation services for lock washers in accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly protected, labeled, and prepared for shipment. This includes the accurate application of labeling requirements mandated by military specifications and the generation of receiving reports to document delivery and compliance. Work must be performed to meet stringent defense logistics protocols, with the place of performance designated at Hill AFB, Utah, 84056-5734. The contract is structured as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the Nuclear Reactor Program. Responses are due by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with federal defense procurement timelines and quality benchmarks.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details