Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity was posted on September 9, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Tescom Regulator/Pressure Gauges & Parker CGA Adapters

Closed
NNK16602180QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332911
New
PARTS KIT BALL VALV — 4820015292976 — N0010426QNF00
Solicitation # N0010426QNF00
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of three parts kits for 2.5 inch ball valves (NSN 4820-01-529-2976). The material is designated as Special Emphasis Material Level I because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the ship. The kits consist of one ball and two mating seats, requiring strict adherence to Naval Sea System Command Drawing 801-6408784 and specific material standards, including SAE-AMS-6931 for the ball and Teflon-filled Acetal for the seats. The contract mandates rigorous quality assurance and certification processes. Requirements include quantitative chemical and mechanical analysis, ultrasonic inspection of starting materials, and strict surface waviness limits. Contractors must maintain a quality system compliant with ISO-9001 and calibration standards such as ISO-10012 or ANSI-Z540.3. All deliverables must be submitted with a Certificate of Compliance and detailed test certifications via the Wide Area Workflow system for review by the Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The delivery timeline is 120 days, with terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, and the items must be marked according to MIL-STD-130 for unique identification. The procurement is a DO-rated order for national defense, and the contractor is provided a one-year warranty from the date of delivery.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
NAICS: 332911
New
PARTS KIT,BALL VALV — 4820015404195 — N0010426QNF02
Solicitation # N0010426QNF02
This solicitation, number N00104-26-Q-NF02, is issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of a Ball Valve Parts Kit (NIIN 015404195). The material is designated as Special Emphasis Level I, meaning it is a Critical Safety Item used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. The kit consists of a ball and matching seats, requiring strict adherence to Naval Sea Systems Command drawings and specific material standards, including QQ-N-286 and Torlon 4503. Due to the critical nature of the hardware, the contract mandates high-level quality assurance, including ISO-9001 compliance, ultrasonic inspection of starting materials, and specific laboratory testing for slow strain rate tensile tests. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Delivery is required within 120 days on an FOB Destination basis, with all invoicing and certification data processed through Wide Area Workflow. The contract is DO certified for national defense under the Defense Priorities and Allocations System. Strict quality control measures are in place, including mandatory Government Source Inspection, a one-year warranty on supplies, and the requirement for a comprehensive Certificate of Compliance and detailed test certifications prior to shipment to the Portsmouth Naval Shipyard.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
NAICS: 332911
New
SEAT,VALVE — 4820015404194 — N0010426QNF01
Solicitation # N0010426QNF01
This contract is a solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of valve seats (NSN 4820-01-540-4194). The material is designated as Special Emphasis Material Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the vessel. Consequently, the contract mandates rigorous quality control, including a requirement for the contractor to maintain a quality system compliant with ISO 9001 and calibration standards such as ISO 10012 or ANSI-Z540.3. The valve seats must be manufactured from Torlon Type 4503 compression molded material in accordance with Naval Sea Systems Command Drawing 801-6408790 and Electric Boat Specification 4147. Strict traceability and certification requirements are in place to ensure the integrity of the components. Each seat must be permanently marked per MIL-STD-792 to provide direct traceability to its chemical and mechanical properties. The contractor is required to submit a Certificate of Compliance and detailed material certification test reports via the Wide Area Workflow system for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Additionally, the contract prohibits the intentional use of mercury and requires all packaging and marking to adhere to MIL-STD-2073 and MIL-STD-129. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
NAICS: 332911
New
PARTS KIT,BALL VALV — 4820013382264 — N0010427QFA01
Solicitation # N0010427QFA01
This solicitation is for the procurement of a Ball Valve Parts Kit (NSN 4820-01-338-2264) for use in crucial shipboard systems. Due to the high risk associated with material failure, the items are designated as Special Emphasis Material (Level I Scope of Certification), requiring strict quality control and comprehensive certification. The kit consists of one ball and two mating seats, with specific material requirements including SAE-AMS-6931 or ASTM-B367 Grade C-5 for the ball and MD71-GG Mearthane for the seats. The ball must also receive a specific Chemours Company Teflon coating. The contract mandates rigorous testing and inspection, including hydrostatic tests for each ball, non-destructive testing for welds, and strict spherical surface waviness limits. All material verification, traceability, and NDT certifications must undergo 100 percent inspection, with lot acceptance based on zero defects. The contractor is required to submit detailed certification data and test results via the Wide Area Workflow (WAWF) system to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Administrative requirements include a delivery period of 365 days after the contract effective date and adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. The award is a DPAS DO-rated order, and the government will evaluate offerors based primarily on past performance and secondarily on price. All welding and brazing must comply with specified Navy standards, and any deviations or engineering change proposals must be approved by the Contracting Officer.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
NAICS: 332911
New
PARTS KIT,BALL VALV — 4820013517223 — N0010426QNE97
Solicitation # N0010426QNE97
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of three Ball Valve Parts Kits (NSN 1HM 4820-01-351-7223) intended for use in crucial shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis Level I material, requiring strict quality assurance and certification. The kits consist of a ball made from SAE-AMS-6931 or ASTM-B367 Grade C-5 and mating seats made from Torlon 4503. Key technical requirements include a 30-minute hydrostatic test at 150 percent of specified pressure for each ball, non-destructive testing for welds, and strict adherence to spherical surface waviness and thread inspection standards. The contract is a total small business set-aside, with award based on the most advantageous offer considering price and past performance, the latter being the primary evaluation factor. Offerors must possess a U.S. Security Clearance of Confidential or higher to access classified annexes. All objective quality evidence and certifications must be submitted via Wide Area Workflow to Portsmouth Naval Shipyard for review and acceptance prior to shipment. Final acceptance is conducted at the origin, with lot acceptance based on a zero-defect policy. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, and the contractor is provided a one-year warranty from the date of delivery.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days

General Info

Agency

N/A

Contract Value

$10,894.02

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

NASA/John F. Kennedy Space Center, Kennedy Space Center, FL, 32899, USA

Set-Aside

SBA

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts1 person available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
Contacts
Patricia A. ShipeContract Specialist

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number NNK16602180Q shall be used to reference any written quote provided under this request for quote. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. This is a set-aside for Small Business. The North American Industry Classification System (NAICS) code for this project is 332911, Industrial Valve Manufacturing, with a size standard of 750 Employees. The requirement for this acquisition is to provide and deliver the following items listed below to NASA KSC, FL: Item Description Qty Unit Unit Cost Total 001 Parker CGA-350 to VCR adapter 5 EA Model # 57-350M4VM-2 Part # 44800308 002 Parker CGA-580 to VCR adapter 2 EA Model # 57-580F4VM-2 Part # 44800238 003 Parker CGA-590 to VCR adapter 1 EA Model # 57-590M4VM-2 Part # 44800592 004 Tescom Model 64-3400 regulator 8 EA Model # 64-3440KRT22 005 Tescom upstream pressure gauge 0-4000 psig 8 EA Model # 47760-4000M 006 Tescom downstream pressure gauge 0-60 psig 8 EA Model # 47760-V060M This is a Brand Name requirement. Please see attached Brand Name Justification. Country of the manufacture_________________ Estimated Delivery Time: ____________ Warranty: _______________ FOB: Destination Ship to address: NASA/KSC NASA Transportation Officer/Receiving Bldg. M6-744 Kennedy Space Center, FL 32899 NOTICE TO OFFERORS: In accordance with FAR 8.402(f), an ordering activity Contracting Officer may combine open market items with General Services Administration (GSA) items; therefore, if any item is applicable to (GSA) Contract Schedule please clearly label the item GSA or open market. Include your GSA contract schedule number for the items identified, and provide the expiration date of the contract schedule. FAR 52.212-1, Instructions to Offerors - Commercial Items (Oct 2015), applies to this acquisition and the following addendum applies: The following words stating "offer", "offeror", and "proposal" are replaced with "quotation", "vendor", and "quote". Paragraph (a) first sentence is revised as follows: "The NAICS code and small business size standard for this acquisition appear above." RFQ Due Date: 19 Sep 2016 RFQ Due Time: 3:00 PM EST E-mail Quote to: patricia.a.shipe@nasa.gov Note: .zip files are not an acceptable format for the Network and will not go through our e-mail system. All questions regarding this solicitation must be e-mailed to patricia.a.shipe@nasa.gov by 3:00 PM EST on 14 Sep 2016. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. All companies must be registered in the System for Award Management at https://www.sam.gov/portal/public/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instruction shall be provided at time of award. Please provide the following information with your quote: DUNS Number: Cage Code: Tax ID Number (TIN): *Number of Employees: *Total Yearly Revenue: *Information required for determining the size of the business for the NAICS referenced above Offers must include the following: Solicitation Number: NNK16602180Q FOB: Destination Shipping Cost Included? Yes No Estimated Delivery Date: Discount/Payment Terms: Warranty Duration (if applicable): Special Commercial Terms (if applicable): The offer must be signed by an authorized company representative. Prospective offerors may notify this office via e-mail of their intent to submit an offer. It is the offeror's responsibility to monitor this site for release of solicitation amendments (if any). Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act - Supplies," the offeror shall so state and shall list the country of origin. FAR 52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://www.acquisition.gov/far/ FAR 52.225-18 Place of Manufacture (Sep 2006) (a) Definitions. As used in this clause- (b) "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. FAR 52.212-2, Evaluation -- Commercial Items (Oct 2014), applies to this acquisition and the following evaluation is applicable: Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures in accordance with FAR 13.106. Offeror's submissions will be evaluated based upon price, and ability to fulfill the requirement. Please ensure that any submission made in response to this solicitation contains adequate information to allow for government evaluation in accordance with the above criteria. Discussions: The government intends to award a purchase order without discussions with respective vendors. The government however, reserves the right to conduct discussions if deemed in its best interest. FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items (July 2016) - Alternate I (Oct 2014) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that-- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or ...

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS