Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TESTER, FIRE HOSE

Active
SPE8E6-26-T-3798Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three units and an additional twelve units of a fire hose tester, totaling fifteen units, identified by NSN 4210-01-257-0850, under solicitation SPE8E6-26-T-3798, which is a total small business set-aside. The tester must be built on a steel platform with a roll cage and casters, featuring 1-1/2 inch minimum diameter threaded FNPT manifolds with one inlet and four independent outlets, each controlled by stainless steel quarter-turn ball valves. It must include a minimum 1 HP, 115-volt, 60 Hz, totally enclosed fan-cooled motor and a twin piston positive displacement pump capable of generating up to 500 PSI to test 600 feet of 6-inch hose, 1,200 feet of 2-1/2-inch hose, or 2,400 feet of 1-1/2-inch hose simultaneously. The unit must be equipped with a 3-wire ground plug, water-tight on/off switch, pressure gauge, and by-pass regulator, and must not contain intentionally added mercury or mercury compounds except in specified exempted components like batteries or instruments, which must be shockproof and contain secondary containment per NAVSEA 5100-003D. All units must comply with DLA packaging requirements, MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and be palletized accordingly with no special marking. Delivery is FOB origin with zero quantity variance, inspection and acceptance occur at the destination, and delivery is due within 58 days. Two separate delivery points are specified: Tracy, California for the first three units due by January 31, 2027, and New Cumberland, Pennsylvania for the next twelve units due by July 23, 2026, with an original required delivery date of November 3, 2026, for both. The contract requires adherence to all referenced DLA technical and quality requirements and transportation instructions per DLAD procedural notes.

General Info

Fifteen fire hose testers procured under small business set-aside, delivered in two batches to California and Pennsylvania by specified dates.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

314999 - All Other Miscellaneous Textile Product MillsView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

SPE8E6-26-T-3798.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TESTER,FIRE HOSE
TESTER, FIRE HOSE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RICE HYDRO EQUIPMENT MFG CO
ONTARIO, CA
BUILT ON STEEL PLATFORM WITH
ROLL CAGE AND EQUIPPED WITH CASTERS. 1-1/2 IN.
MIN. DIA. FOR INLET AND OUTLET MANIFOLDS, WITH
ONE INLET AND FOUR OUTLET CONNECTIONS.
ALL FIVE CONNECTIONS SHALL BE 1-1/2 IN. MIN.
DIA. THREADED FNPT, AND SHALL BE CONTROLLED IN
DEPENDENTLY WITH STAINLESS STEEL QUARTER-TURN
BALL VALVES. THE TESTER SHALL BE EQUIPPED WITH
A 1 HP (MIN.), 115 VOLT, 60 HERTZ, TOTALLY EN
CLOSED, FAN-COOLED, INSULATED MOTOR AND A TWIN
PISTON, POSITIVE DISPLACEMENT PUMP THAT IS CAP
ABLE OF PRODUCING UP TO 500 PSI IN THE MANIFOLD.
THE COMPLETE UNIT SHALL BE CAPABLE OF TESTING
600 FT. OF 6 IN. HOSE, OR 1,200 FT. OF 2-1/2 IN.
HOSE, OR 2,400 FT. OF 1-1/2 IN. HOSE AT A TIME.
THE TESTER SHALL HAVE A 3-WIRE GROUND PLUG,
WATER-TIGHT ON/OFF SWITCH, PRESSURE GAUGE AND
BY-PASS REGULATOR.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
WORMALD AUSTRALIA PTY LIMITED Z0461 P/N FH-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8E6-26-T-3798
SECTION B
PR: 7017585803 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585803 0001 EA 3.000
NSN/MATERIAL:4210012570850
DELIVERY (IN DAYS):0058
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E6 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE8E6-26-T-3798
SECTION B
PR: 7017585803 PRLI: 0001 CONT’D
Need Ship Date:01/31/2027 Original Required Delivery Date:11/03/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017585803 0002 EA 12.000
NSN/MATERIAL:4210012570850
DELIVERY (IN DAYS):0058
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E6 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E6 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE8E6-26-T-3798
SECTION B
PR: 7017585803 PRLI: 0002 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/23/2026 Original Required Delivery Date:11/03/2026
SPE8E6-26-T-3798 NSN/Part Number: 4210-01-257-0850 Quantity: 3 EA Purchase Request: 7017585803QTY: 15 Delivery: 58 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314999
New
DIBBS
COLLAR, REAR, DRUMThe contract is for the procurement of three collar, rear, drum units with NSN 4210-01-258-2751 under solicitation SPE8E6-26-T-3800, issued by the DLA District San Joaquin on behalf of the Department of Defense. Delivery is required within 167 days from the contract award, with shipment to be made FOB origin and acceptance occurring at the destination. The vendor must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applicable. Packaging must use fabric bags conforming to MIL-B-117 specifications and follow DLA packaging requirements, ensuring proper containment and labeling. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a required ship date of January 18, 2027, and an original delivery deadline of December 11, 2026. No variance in quantity is permitted. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware except in specific allowable applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and authorized chemical reagents, as defined by NAVSEA. Portable devices containing mercury must include a secondary containment boundary and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Transportation and shipping must comply with DLA Procurement Notes C19 and C20, and all hazardous materials handling follows IP025 guidelines. The point of contact for inquiries is John Lieb, and the solicitation response deadline was August 3, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
BLANKET, FIREThis contract pertains to the procurement of fire blankets under the NSN 4210-01-661-3453 and part number 2200162-15005, with a total quantity of 18 units at a unit price of $18.00, resulting in a total contract value of $324.00. Delivery is required FOB origin within 167 days, with inspection and acceptance points set at the destination. The packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including specific packaging codes and methods for preservation, wrapping, and containerization as detailed in the DLA packaging requirements. Palletization must follow RP001 standards, and no special marking is required. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required ship date set for January 18, 2027, though the original delivery deadline was December 13, 2026. The contract enforces a zero variance on quantity and includes references to technical and quality requirements mandated by the DLA Master List, which governs compliance based on solicitation or award date depending on acquisition size. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation, identified as SPE8E6-26-T-3811, was issued on July 22, 2026, with responses due by August 3, 2026, and is classified as a Women-Owned Small Business Set-Aside under NAICS code 314999. The contracting activity is managed by the Department of Defense, specifically through the San Diego office, with John Lieb designated as the primary point of contact. All items must be delivered without government identification if not accepted, and covered defense information requirements may apply. The unit of issue is each (EA), and alignment with ANSI X12 standards for unit conversion is required. The contract specifies that the supplier is Newtex Industries, Inc., and compliance with all referenced standards, including preservation, packaging, and marking procedures, is mandatory for acceptance.
SAN DIEGO

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
NOZZLE, FIRE EXTINGU
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
42--BLANKET,FIRE
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
42--TESTER,FIRE HOSE
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
BRIDLE, PARACHUTEThe contract is for the procurement of 25 units of a bridle assembly for a drag parachute, identified by NSN 1670-00-629-8412, under solicitation SPE4A7-26-T-588Y, with a response deadline of July 29, 2026, and delivery required within 431 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item is subject to stringent cybersecurity compliance, requiring CMMC Level 2 certification by a third-party assessment organization, and must adhere to DLA packaging standards and tailored higher-level contract quality requirements. Inspection and acceptance must occur at the manufacturer’s facility, and non-accepted items must have all government identification removed. Physical identification of the bare item must be marked in accordance with specified standards. Technical data associated with the item is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including U.S. subsidiaries and foreign national employees; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed training, and formal DLA authorization. Performance is to be delivered to Tinker AFB, Oklahoma, with the primary point of contact being Ashley Brown of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIVEThis contract pertains to the procurement of one unit of fire protective gear identified by NSN 4210-01-718-6904 and part number NAVY2K-M-29 (MD-REG), manufactured by LION APPAREL INC, designated as a Type I (Code W) item with a non-extendable shelf life of 120 months. The gear must comply with all applicable technical and quality requirements referenced in the DLA Master List, including packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with special labeling indicating Type I and shelf life. Packaging must meet DLA’s procurement guidelines, with weatherproofing required if destined for overseas or FMS customers, and commercial labels must include the contractor’s name, contract number, NSN, size, fiber content, and laundering instructions. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, explicitly prohibiting parcel post, and must be addressed to USS FT LAUDERDALE (LPD 28), FPO AE 09595, under RDD 777 and referencing contract SPE8E9-26-T-3195. The item is subject to removal of government identification if not accepted and must be marked as bare item per specified requirements. The original required delivery date is July 16, 2026, with the solicitation issued under a federal procurement framework governed by DLA’s unit of issue standards and procurement procedures, including all applicable technical, quality, and logistics directives applicable to Department of Defense acquisitions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
Protective Housing Unit ManufacturingThe contract specifies the manufacture of two military-grade protective housing units designed to meet Federal Standard No. 313 and comply with hazardous materials labeling regulations under OSHA 29 CFR 1910.1200. These units are intended for use in defense applications where durability, environmental resilience, and strict adherence to safety labeling standards are critical. The work falls under NAICS code 314999 for other fabricated metal product manufacturing and is structured as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense. The contract was posted on July 20, 2026, and performance is expected to occur without a designated city or state, indicating potential flexibility or multiple locations for delivery or assembly. The contract is accessible via the DIBBS system under award number SPE7M226V4425, though no specific point of contact or place of performance details are provided in the available data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
DIBBS
Commercial Manufacturing of Military Name Tape Sets (Desert Pattern)The contract entails the full-cycle manufacturing of military name tape sets in desert pattern, covering every stage from material sourcing to final shipment, with strict adherence to federal compliance standards. All production activities including embroidery, cutting, sealing, and packaging must meet precise military specifications to ensure durability, legibility, and uniformity across all units. The work is performed under a subcontract agreement sourced through the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 314999 for other textile product mills. The production must be completed and delivered in accordance with federal procurement guidelines, though specific performance locations and point of contact details are not provided. The solicitation was posted July 20, 2026, and is tied to the contract identification SPE1C124DB021 with delivery reference SPE1C126F5277.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
DIBBS
Commercial Manufacturing of Military Name Tape Sets (Woodland Pattern)The contract entails the full-cycle manufacturing of military name tape sets in Woodland camouflage pattern, covering all stages from material sourcing to final shipment, with strict adherence to federal compliance standards. This includes specialized embroidery, precision cutting, heat sealing, secure packaging, and timely delivery, ensuring all components meet rigorous military specifications for durability, legibility, and environmental resistance. The work is performed under a subcontract arrangement sourced through the Defense Logistics Agency, a division of the Department of Defense, with the North American Industry Classification System code 314999 indicating it falls under other textile product mills. Production must align with federal procurement mandates, including sourcing eligible materials and maintaining quality control throughout each phase to support readiness and uniformity across military units. The manufacturing process is intended for use by U.S. armed forces, with deliveries governed by contractual timelines and logistical requirements tied to the DLA’s supply chain infrastructure. Though specific performance locations and point of contact details are not provided, the contract is linked directly to the DLA’s award system, indicating formal tracking and accountability under the SPE1C126F5277 delivery order, with posting date set for July 2026 to support future operational needs.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
Federal
Solarcore Textile (0.8mm thick polymer aerogel-infused non-woven nomex/kevlar)NASA/NSSC is soliciting capabilities and qualifications for the sole-source procurement of Solarcore Textile, a 0.8mm thick polymer aerogel-infused non-woven material composed of Nomex and Kevlar, to be supplied exclusively by LUKLA, INC. The acquisition is justified under FAR 12.102(a) as LUKLA, INC. is the sole provider of this specialized material, and the Government intends to treat it as a commercial item under FAR Part 12 procedures. The contract will be managed by NASA Shared Services Center with performance located at NASA Glenn Research Center, and the NAICS code assigned is 314999. Interested parties may submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on July 23, 2026, to support the Government’s determination on whether to proceed without competition; oral communications are not accepted. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and the Center Ombudsman information is accessible via the provided link. Primary point of contact is McKenzie Hanson, Procurement Specialist, at McKenzie.M.Hanson@nasa.gov, with Karen Artis listed as secondary contact.
NASA Shared Services Center

POSTED

2 days ago

DEADLINE

in about 23 hours
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 339930
New
DIBBS
LIFE PRESERVER, VESTThe contract specifies the procurement of 2,300 life preserver vests, identified by NSN 4220-01-113-8665, under solicitation SPE8E6-26-Q-0584, issued by the Defense Logistics Agency Dist San Joaquin. This is a critical safety item designated by the Air Force, requiring strict adherence to all technical and quality standards, including SAE AS9100 for manufacturers and non-manufacturers. All items must be marked in accordance with MIL-STD-129, including the contractor’s and actual manufacturer’s CAGE codes, part number, lot number, and serial number if available. The vests are classified as a critical application item, and no waivers or deviations are permitted without explicit approval from the DSC contracting officer. The contract imposes a firm fixed price with zero variance in quantity, and inspection and acceptance occur at origin. Delivery is required within 90 days after award date, with packaging compliant to MIL-STD-2073-1E and special handling procedures for hazardous materials as outlined in STO ZD072. Compliance with updated federal hazard communication standards is mandatory, requiring suppliers to provide Safety Data Sheets (SDS) and labels conforming to 29 C.F.R. 1910.1200, replacing prior MSDS requirements. Suppliers must also ensure employee training on these updated hazardous communication protocols. Documentation for source approval, inspection, and removal of government identification from non-accepted items must be submitted per specified requirements. The item is governed by multiple referenced technical data packages, including revisions tied to CID A-A-50652, QAP 13873, and drawing number 98752 200415485. The delivery destination is the DLA warehouse in Tracy, CA, and all shipments must align with DLA transportation procedures. The contract was posted on July 22, 2026, with proposals due August 3, 2026, and the material is needed no later than July 27, 2026, for federal use.
Doll, Toy, and Game Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGALThe contract is for the procurement of 11 centrifugal fans under NSN 4140-01-174-4368 and part number C7V181Q-8CC, issued by DLA Dist San Joaquin under solicitation SPE8E7-26-T-3376. The requirement mandates strict adherence to DLA’s technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and MIL-STD-129 for marking, while prohibiting plastic wrapping, cushioning, or dunnage wherever permissible. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA, and the goods must be delivered within 167 days of contract award, with an original required delivery date of December 24, 2026, and a need ship date of January 18, 2027. The unit of issue is each, with a fixed unit price of $11.00 and zero tolerance for quantity variance. The contract incorporates all applicable DLA packaging and documentation requirements, including the removal of government identification from non-accepted supplies and compliance with specified unit of issue codes. Packaging must align with RP001 and palletization standards, with no special marking required beyond standard MIL-STD-129 compliance. Transportation instructions reference DLAD Proc Notes C19 and C20, and the consignee address is clearly defined for delivery. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 333413 for industrial machinery manufacturing. The primary point of contact is Kelly Mitchell of DLA, reachable by phone or email, and all technical and quality clauses are bound by the version of the DLA Master List in effect on the solicitation issue date.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326111
New
DIBBS
EXTINGUISHER, FIREThe contract requires the procurement of 84 fire extinguishers under NSN 4210016083387 and part number 429011, supplied by TYCO FIRE PRODUCTS LP, with a unit price of $84.00 and a total value of $7,056. Delivery is due within 37 days after contract award, with FOB destination and no variance allowed in quantity. Inspection and acceptance occur at the destination warehouse in Tracy, California, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA packaging standards and special marking requirements. Hazardous materials handling is governed by OSHA’s updated Hazard Communication Standard effective June 1, 2015, requiring suppliers to submit Safety Data Sheets and compliant labels following 29 C.F.R. 1910.1200, along with employee training on these requirements. The supplier must also adhere to DLA’s technical and quality requirements referenced via the DLA Master List, and shipping instructions must follow DLAD Proc Notes C19 and C20. The required delivery date is November 11, 2026, with a need ship date of July 26, 2026, under solicitation SPE8E6-26-T-3812, issued by the Department of Defense through DLA District San Joaquin, and point of contact is John Lieb.
Plastics Bag and Pouch Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract pertains to the procurement of a tube axial fan with part number LT-2001589-00 and NSN 4140017003000, under solicitation SPE8E7-26-T-3395, with a required delivery of ten units within 113 days from the contract date. The purchase order price is $10.00 per unit, totaling $100.00, and the delivery terms are FOB origin with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping, and unit containerization. Marking must adhere to MIL-STD-129 with no special marking codes applied. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with the same address used for freight shipping. The contract references technical and quality requirements from the DLA Master List, with provisions for document control based on acquisition type and amendment dates. The solicitation was issued on July 22, 2026, with responses due August 3, 2026, under NAICS code 333413 for industrial fan manufacturing, and the primary point of contact is Kelly Mitchell at DLA Dist San Joaquin.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIALThis contract specifies the procurement of one axial fan impeller with part number 505551-1503 and NSN 4140-01-421-3618 under solicitation SPE8E7-26-T-3382, issued by the Defense Logistics Agency Distribution San Joaquin. The item must be delivered in a single unit within 167 days from the date of award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129, and must be palletized as specified. No mercury or mercury-containing compounds may be intentionally added to the product or come into direct contact with it, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals explicitly authorized by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the revision in effect at the solicitation issue date governs compliance. The unit of issue is each, the price is specified per unit, and the total contract value is based on the single unit quantity. The supplier must meet all special handling, packaging, and labeling guidelines, and the delivery must be completed no later than January 18, 2027, with the original required delivery date set for May 21, 2027. All transportation and shipping instructions must follow DLAD procedural notes C19 and C20, and the point of contact for inquiries is Kelly Mitchell of the DLA.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335132
New
DIBBS
LIGHT, TRAFFIC, AIRCR
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, DOUBLE
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
VALVE PLATE ASSEMBLThe contract pertains to the procurement of a Valve Plate Assembly identified by NSN 4130-00-830-7676 and Part Number 5H40-120A, with a quantity of 26 units to be delivered FOB origin within 167 days of contract award. The item is subject to strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with all marking required to comply with MIL-STD-129 and no special marking codes applied. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and inspection and acceptance occur at the destination. The contract prohibits any intentional introduction of mercury or mercury-containing compounds into the hardware except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendment dates. The purchase request number is 7017585202, unit price is $26.00, and total contract value is $676.00. The solicitation was issued under contract number SPE8E8-26-T-4830 with a response deadline of August 3, 2026, and is classified under NAICS code 333415. All materials must adhere to DoD unit of issue standards and government identification removal protocols for non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
MANIFOLD, CHARGING AThe contract pertains to the procurement of a MANIFOLD, CHARGING A with NSN 4130-00-814-0142 and part number AC855, under solicitation SPE8E8-26-T-4780, with a quantity of 26 units at a unit price of $26.00, totaling $676.00. Delivery is required FOB origin within 167 days of contract award, with a required ship date of January 18, 2027, and original delivery deadline of October 12, 2026. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements. All DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The item must not contain intentionally added mercury or mercury compounds except in specific exempted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals designated by NAVSEA; portable mercury-containing devices must be shockproof and include a secondary containment per NAVSEA 5100-003D. The delivery address is DLA DIST SAN JOAQUIN, REC WHSE 57, Tracy, CA 95304-5000. Transportation and freight specifications follow DLAD PROC NOTES C19 and C20. The contract enforces zero variance in quantity, and the unit of issue is each (EA). Technical and quality requirements are governed by the DLA Master List effective on the solicitation issuance date, with designated points of contact and compliance obligations outlined for the supplier.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
LIFE PRESERVER, UNDEThis contract is for the procurement of 81 units of the UNDERARM LIFE PRESERVER, identified by NSN 4220-01-524-5323 and part number TFSS-5326-C/GN, supplied by PECI FLOATATION LLC. The item is classified as a commercial product and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and hazardous material handling procedures outlined in RP001 and IP025, including special requirements tied to STO ZD072 for hazmat. The delivery is FOB destination with no variance allowed in quantity, and the contract requires delivery within 58 days to the designated receiving warehouse in Tracy, California. All hazardous materials associated with this item must be accompanied by Safety Data Sheets formatted in compliance with 29 C.F.R. 1910.1200 and OSHA’s Globally Harmonized System, along with approved HCS labels. Suppliers are required to train employees on these regulations and must not include asbestos as defined in FED-STD-313 or intentionally add mercury or mercury-containing compounds, except for specified functional uses in batteries, instruments, or weapon systems, where secondary containment and shockproofing are mandatory per NAVSEA 5100-003D. The contract mandates submission of documentation for source approval, and all supplies must eliminate government identification if rejected. The original required delivery date is October 31, 2026, with a need ship date of March 27, 2026, and the solicitation closed on August 3, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURALThis contract specifies the procurement of structural steel angle shapes with exact dimensions of 3.000 inches in height and width, 0.375 inches in thickness, and lengths ranging from 30 to 40 feet, weighing approximately 7.200 pounds per foot. The material is identified as steel UNS K02600 and must comply with ASTM A6 Table A2.7 for equal-legged L-shapes, with all requirements aligned to ASTM A6/A6M-24B and ASTM A36/A36M-19. Material must be supplied in whole-foot lengths only and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required for items under 0.250 inches nominal OD. Certification of quality compliance, including mill material certification, is mandatory with each shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. The procurement is governed by strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official QSLD to be considered for award; any deviation constitutes an exception and must be explicitly declared. The government waives source inspection requirements for qualified suppliers, and failure to comply with QSLD terms may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and palletization must meet DLA packaging requirements. The item is designated a critical application, and the total quantity is 768 linear feet to be delivered within 69 days FOB origin to Tracy, CA, with a permitted quantity variance of plus or minus 10 percent. The contract references multiple technical data packages and quality assurance protocols, including CDRL-METALSCERT, and requires strict adherence to all DLA procurement notes and technical requirements as published in official DLA documentation.
Iron and Steel Forging

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes conforming to AWS A5.10 ER5356 specifications, with a nominal diameter of 0.030 inches, supplied on 1-pound rolls, packaged horizontally, and designed for direct current reverse polarity shielded arc welding. The item is identified by NSN 3439-00-892-4382 and a unit of issue of RL, with a total quantity of 307 rolls required. The product is classified as a commercial item and is procured under a military specification without shelf life restrictions. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The material must not contain intentionally added mercury or mercury compounds, except for specific exempted uses such as batteries or instruments, and any portable devices containing mercury must meet shock-proof and secondary containment criteria per NAVSEA 5100-003D. All hazardous materials supplied must be accompanied by Safety Data Sheets compliant with OSHA’s revised Hazard Communication Standard, including GHS-aligned labeling, and suppliers are required to submit both SDS and labels for contracting officer approval prior to award. Employee training on the updated hazard communication standards is mandatory. The contract solicitation number is SPE8E5-26-T-3670, issued by DLA Dist San Joaquin, with a response deadline of August 3, 2026, and delivery expected within 167 days after order. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Ira Hedgepeth.
Welding and Soldering Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details