Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Testing, Balancing, and Performance Certification

Active

Federal

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Testing, Balancing, and Performance Certification requires the dynamic balancing and performance testing of a repaired fan assembly to verify compliance with established airflow, vibration, and operational specifications. The work is focused on ensuring the restored equipment meets rigorous standards for functionality and reliability, with all testing procedures designed to validate performance under expected operational conditions. This effort is critical to maintaining the integrity and efficiency of systems that depend on precise fan operation, particularly in mission-critical environments. This subcontract, issued under NAICS code 541330 by the Department of Defense through Navsup Weapon Systems Support, is open for responses until August 21, 2026. The place of performance is located in Phoenix, Arizona, with a zip code of 85034. Although no specific solicitation number or point of contact is provided, the posting date of July 23, 2026, indicates an upcoming opportunity with a defined timeline for submission and evaluation. The nature of the work implies the need for specialized technical expertise in mechanical balancing and performance validation, with certification required to confirm adherence to contractual and operational requirements.

General Info

Dynamic balancing and performance certification of repaired fan assembly in Phoenix, Arizona, by August 21, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Phoenix, AZ, 85034, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Dynamic balancing and performance testing of the repaired fan assembly to ensure compliance with airflow, vibration, and operational specifications.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite Delivery/Indefinite Quantity contract for a range of major construction initiatives. These services will support all phases of project delivery including planning, design, construction, and closeout for various delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches. The contractor will be responsible for ensuring that all projects align with approved schedules, budgets, and quality standards, acting as a key partner in the successful execution of the Port’s capital improvement efforts. The contract does not specify a set-aside type and is categorized under NAICS code 541330, reflecting its focus on architectural and engineering services related to construction management. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. Both can be reached via phone and email provided through the Port’s official channels. The solicitation is posted as a forecast with no solicitation number assigned yet, indicating it is an upcoming opportunity for industry engagement. There is no designated place of performance specified beyond its association with the Port of Seattle, suggesting work may occur across multiple project sites within the Port’s jurisdiction. All prospective bidders should refer to the official UI link for updated details and future solicitation releases.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system reliability, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed through Service Directives and coordinated closely with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an IDIQ vehicle under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager; all inquiries and coordination should be directed through the provided contact information. Work will occur at the airport and is intended to support continuous, safe, and efficient operations without disruption to daily flight activities.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

about 15 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT PLANNING SERVICES FOR EAST GEORGIA REGIONAL AIRPORTThe City of Swainsboro is soliciting proposals for professional on-call airport planning services to support the Airport Capital Improvement Plan at East Georgia Regional Airport. The contract seeks a qualified aviation consulting firm to provide expert planning, design, and technical advisory services as needed over the term of the agreement, ensuring alignment with federal, state, and local aviation standards. All work will be performed in Georgia and is intended to enhance the airport’s infrastructure, operations, and long-term development goals. Proposals must be submitted by August 13, 2026, and the solicitation number is PE-66723-NONST-2026-000000019. The contracting authority is the City of Swainsboro, with Jerry Cadle of Cadle Law Firm serving as the primary point of contact for inquiries, reachable via email at Jerry@cadlelawfirm.com. This is a state and local government procurement under the SLED category, and while no specific set-aside or NAICS code is listed, the solicitation is open to qualified firms with demonstrated experience in airport planning and capital improvement projects.

City of Swainsboro

POSTED

DEADLINE

On-Call Planning, Resilience, and Community Development ServicesThe Coastal Bend Council of Governments is seeking qualified firms and multidisciplinary consultant teams to provide on-call professional services under an Indefinite Delivery/Indefinite Quantity contract for planning, resilience, community development, housing, economic development, and infrastructure planning. These services will support a wide range of local, regional, state, and federally funded initiatives across the Coastal Bend region, beginning with the preparation of a Comprehensive Plan for the City of Refugio, Texas, with additional task orders expected to serve other municipalities, counties, special districts, and grant-driven projects as funding becomes available. The solicitation aims to establish a pool of capable providers who can deliver timely, high-quality technical assistance to regional stakeholders. Firms interested in participating must submit Statements of Qualifications by the August 31, 2026 deadline, and selections will be made based on demonstrated expertise, capacity, and relevance to the anticipated scope of work. The contract is managed by the Coastal Bend Council of Governments, based in Corpus Christi, Texas, with primary point of contact Mary Afuso and Executive Director Emily Martinez available for inquiries. There is no set-aside designation, and the contract will remain open to qualified firms nationwide, with the goal of securing one or more providers to meet ongoing and future needs across the region. All submissions and correspondence must be directed through the designated contacts listed in the solicitation.

COASTAL BEND COUNCIL OF GOVERNMENTS

POSTED

DEADLINE

in about 1 month

Consultancy Services for Car Park and Solar Farm Integration TFACCThe Department of Correctional Services under the Government of Jamaica is seeking consultancy services to integrate a car park with a solar farm at the Tamarind Farm Adult Correctional Centre. The solicitation, identified by number 1662/267, was posted on July 24, 2026, with a response deadline of August 19, 2026, inviting qualified professionals or firms to submit proposals for comprehensive design, planning, and implementation advice regarding the co-location of parking infrastructure and renewable energy generation. The project aims to enhance sustainability and operational efficiency at the correctional facility by combining vehicle parking with photovoltaic solar energy systems, requiring expertise in civil engineering, solar energy systems, spatial planning, and government compliance standards. All work is to be performed at the Tamarind Farm site in Jamaica, with no specific set-aside provisions or NAICS code designated, and the contract is open to any eligible party meeting the technical and procedural requirements outlined in the solicitation. Proposals must be submitted through the official eProcurement portal before the deadline to be considered.

Department of Correctional Services

POSTED

DEADLINE

PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUCTION INSPECTION/ADMINISTRATION CONThe City of Swainsboro is soliciting qualified aviation consulting firms to provide on-call professional services related to the Airport Capital Improvement Plan at the East Georgia Regional Airport. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and ongoing construction oversight. The firm selected will be expected to deliver comprehensive technical expertise across all phases of airport infrastructure development, ensuring compliance with regulatory standards and efficient project execution. Responses to this solicitation must be submitted by August 13, 2026, at 5:00 PM, and the opportunity is posted under solicitation number PE-66723-NONST-2026-000000017, with a posting date of July 24, 2026. The contract is issued by the City of Swainsboro in Georgia and is intended for use by state, local, or educational entities. All inquiries and communications should be directed to Jerry Cadle at jerry@cadlelawfirm.com. The services will be performed at the East Georgia Regional Airport, and the selected vendor will be required to maintain a high standard of professionalism and technical competence in support of the airport’s long-term infrastructure goals.

City of Swainsboro

POSTED

DEADLINE

Construction Project Management (CPM) ServicesThe contract entails full lifecycle construction project management services for a 750-space parking garage to be delivered through a progressive design-build approach, encompassing all phases from initial design review through final construction oversight. Key responsibilities include developing a guaranteed maximum price, creating and managing detailed scheduling metrics, and coordinating with regulatory agencies to ensure compliance with all applicable codes and standards. The project is positioned within Sacramento and will require close collaboration between the contractor and public entities to align design intent with functional requirements and construction timelines. This is a subcontract opportunity under NAICS code 541330, issued by the California Department of General Services with a response deadline of August 20, 2026. The work is expected to involve extensive coordination across multiple disciplines and stakeholder groups, with an emphasis on risk mitigation, cost control, and schedule adherence throughout the project’s duration. While no set-aside type is specified, the procurement is accessible under the state’s e-procurement platform, and performance is mandated at the Sacramento location.

California Department of General Services

POSTED

DEADLINE

Quality Inspection and Compliance ServicesThe contract requires third-party services to perform mechanical testing, dimensional verification, and quality assurance on U-bolt hardware to ensure adherence to implied government and industry standards before acceptance in Texas. These inspections are critical to verifying that the hardware meets required performance and safety criteria, with all work to be completed in compliance with applicable regulations without explicit written specifications. The scope is focused strictly on pre-acceptance validation to mitigate risk and ensure compatibility with state transportation infrastructure demands. Issued by the Texas Department of Transportation under NAICS code 541330, this subcontract is open for response until August 14, 2026, with a posting date of July 24, 2026. The place of performance is in Texas, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and inquiries must be directed through the public portal linked in the posting. All submissions must demonstrate capability to deliver accurate, verifiable testing results aligned with industry norms governing U-bolt reliability under load and environmental stress.

Texas Department of Transportation

POSTED

DEADLINE

Independent Quality Assurance / Owner’s Verification Firm (OVF)The contract seeks an Independent Quality Assurance / Owner’s Verification Firm to perform independent reviews and verifications of design documents, construction plans, and contractor submissions to ensure full compliance with contractual obligations and applicable regulatory standards. The firm will serve as a neutral third party tasked with validating the accuracy, completeness, and adherence of all technical and procedural elements throughout the project lifecycle, acting on behalf of the owner to mitigate risk and uphold quality expectations. This role requires deep expertise in engineering and construction standards, as well as the ability to identify discrepancies or noncompliance before they impact project delivery. The opportunity is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Georgia office of the Department of Transportation. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 24, 2026. No specific place of performance or set-aside criteria are indicated, and while contact information is not provided in the data, interested parties must respond through the official portal linked in the solicitation. The nature of the work demands rigorous attention to detail, technical proficiency, and a proven track record in independent verification within public infrastructure projects.

Department of Transportation-2

POSTED

DEADLINE

Transportation Engineering Design ServicesThe contract seeks qualified firms to provide comprehensive civil and transportation engineering design services focused on the alignment of express lanes, modifications to interchanges, installation of signage, and geometric layout adjustments. All design work must strictly adhere to technical standards set by the Georgia Department of Transportation and the Federal Highway Administration to ensure safety, efficiency, and regulatory compliance. The scope requires detailed engineering analysis and documentation to support infrastructure improvements aimed at enhancing traffic flow and system integration within the state’s transportation network. Bidders must submit proposals by August 24, 2026, with the solicitation classified as a subcontract under NAICS code 541330 for architectural and engineering services. The contract is issued by the Georgia Department of Transportation under the agency designation Department of Transportation-2, and while specific location details are not provided, performance is expected to occur within Georgia. Interested parties can access full solicitation information through the provided state portal link, and proposals must demonstrate technical expertise, experience with state and federal transportation standards, and the ability to deliver precise, compliant engineering solutions.

Department of Transportation-2

POSTED

DEADLINE

RFQ 484-082426 GEC and OVF Services for I-75 South Express Lanes PI #0020636The Georgia Department of Transportation is soliciting proposals for General Engineering Consulting and Owner’s Verification Firm services related to the I-75 South Express Lanes project under PI number 0020636. The solicitation, identified as PE-48401-RFQ-2027-000000616, was posted on July 24, 2026, with responses due by August 24, 2026. The work will be performed entirely within the state of Georgia and encompasses technical engineering support and independent verification services to ensure compliance with project standards, safety protocols, and contractual obligations. This engagement will require qualified firms to provide expert consultation throughout the design and construction phases, including review of plans, specifications, and construction progress, as well as verification of contractor performance and adherence to state and federal regulations. The contract is open to vendors under a sole source or competitive solicitation framework with no specific set-aside designation, and all interested parties must submit proposals through the designated state procurement portal. Temekia Arnold of the Georgia Department of Transportation serves as the primary point of contact, available via phone and email for inquiries regarding technical requirements, submission guidelines, and evaluation criteria. Proposals must demonstrate relevant experience in transportation infrastructure projects, particularly with express lane systems, and a proven ability to deliver objective, real-time verification services. Contractors will be expected to maintain close coordination with state engineers and respond promptly to emerging project needs without disrupting ongoing operations.

Department of Transportation-2

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

16--VALVE ASSEMBLY,ENVI, IN REPAIR/MODIFICATION OFThe contract pertains to the procurement of 24 units of a flight-critical valve assembly used in repair or modification applications, identified by NSN 7R-1660-016884617-QE and designated under TDP VER 001, with delivery terms FOB origin. Only previously approved sources may submit proposals due to the technical complexity and proprietary nature of the item, as the Government has determined that existing design control data, manufacturing knowledge, and repair expertise are not economically available outside the approved source base. Source approval is mandatory prior to contract award, and the approval process must be conducted through the designated Navy supply activity, NAVSUP Weapon Systems Support, with strict adherence to procedural requirements outlined in their official brochures. New offerors are required to submit comprehensive documentation demonstrating technical capability, including prior experience with identical or similar items, and failure to provide complete information will result in proposal rejection. The Government intends to award this contract under the authority of FAR 6.302-1 as a sole-source acquisition, recognizing that the time required to qualify a new source would delay fulfillment of critical Fleet needs. Offers must be submitted by August 25, 2026, with consideration given only to those capable of meeting qualification standards at the time of award under FAR clause 52.209-1. This contract excludes commercial item acquisition policies under FAR Part 12, and while interested parties may identify alternative commercial items within 15 days of the notice, no assurance of competition is provided. Technical specifications and associated standards referenced in the solicitation are accessible via the ASSIST-Quick Search portal or through the DoD Single Stock Point in Philadelphia, though drawings, patterns, and deviation lists are not available through this system. The item is subject to trade agreements including the Buy American Act–Free Trade Agreements Balance of Payments Program and the WTO Government Procurement Agreement, with applicable DFARS clauses incorporated. All communications and documentation must be directed to the designated point of contact at NAVSUP WSS, and the place of performance remains unlisted. The contract action is not a request for competitive proposals, and the Government retains full discretion to determine whether to proceed with sole-source award based on received responses, market research, and mission-critical timing constraints.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

16--TUBE, DRAINThis contract solicitation, numbered N0038326QQB01, seeks procurement of a 16-inch drain tube under the North American Industry Classification System code 333998, with a small business size standard of 1,250 employees. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, following a 30-day extension. Performance is to be conducted by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, with primary point of contact provided via email and phone. Mandatory compliance with several federal clauses applies, including the Warranty of Supplies of a Noncomplex Nature, which requires a one-year warranty post-delivery and allows 45 days after defect discovery for remedies. The Buy American Act, Free Trade Agreements, and Balance of Payments Program certifications are required, along with strict limitations on pass-through charges and security prohibitions. Contracting officers must use Workflow Pro's Assist Module, and payment must follow Wide Area Workflow instructions via combined invoice and receiving reports. The contract enforces Equal Opportunity for Workers with Disabilities, mandatory use of AbilityOne support contractors, and compliance with priority rating DO-A1A for national defense purposes. All parties must submit Annual Representations and Certifications under deviation guidelines, and royalty obligations are retained as stipulated. The contract prohibits unauthorized disclosure of offeror information and adheres to all applicable defense procurement regulations.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

41--FLEXIBLE DUCTThe solicitation is for 100 units of flexible duct with NIIN 016645640 and part number CS9018-01-360-2, issued by the Navsup Weapon Systems Support under the Department of Defense. Responses must be submitted via email to christopher.campellone.civ@us.navy.mil by the deadline of August 24, 2026, at 8:30 PM Eastern Time, and early or incremental deliveries are preferred. Only approved sources may be awarded; non-approved vendors must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure available online, or their proposals will be rejected. Government source approval is mandatory prior to award, and failure to meet this requirement may result in the requirement being delayed or reassigned based on fleet support needs. The contract is classified under NAICS code 333415 and includes mandatory compliance with federal regulations, including Buy American provisions, security prohibitions, equal opportunity for workers with disabilities, warranty coverage of 12 months with a 60-day defect discovery window, and the mandatory use of Workflow Pro’s Assist Module. Payment instructions and invoice processing follow the Wide Area Workflow system, and royalty obligations, national defense priority ratings, and annual certifications are all applicable. The place of performance and delivery details are unspecified, but the contracting office is located in Philadelphia, Pennsylvania.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

59--CONNECTOR,RECEPTACLThe U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

99--FAIRING INBOARD,LOWThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole-source contract to The Boeing Company for 28 units of the Lower Fairing Drive part, identified by NSN 1R-0000-LLF02N981-GF and part number 74A192793-1004, exclusively for use on G-F aircraft. This part is critical for aircraft maintenance and has no interchangeable alternatives, as The Boeing Company is the original equipment manufacturer and the sole known source with the proprietary data and rights necessary for production. The government does not possess the technical data rights required to source this part from any other vendor, and this procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.302, allowing noncompetitive acquisition due to the absence of viable alternatives. The contract will last one year, with delivery occurring FOB origin, and will include UID marking and Buy American requirements. The solicitation will be conducted electronically via NECO under FAR Part 15 procedures, with no use of commercial item acquisition policies. The RFP is anticipated to be issued on July 24, 2026, with proposals due by August 24, 2026, and an award expected by September 24, 2026. While the notice is not a request for competitive bids, any firm capable of supplying the item as a commercial item may respond within 15 days of the notice, and all submissions received within 45 days of publication will be reviewed for potential competitive alternatives. No small business set-aside is planned, and all sources must comply with source approval requirements; new manufacturers must submit a Source Approval Request, though the procurement will proceed without waiting for approval. Interested parties must submit capability statements via email to the designated point of contact, and no phone calls or hard copies will be accepted.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

53--CLAMP,LOOPThis contract, issued under solicitation number N0038326QQA80 by the Navy’s Naval Supply Systems Command Weapon Systems Support, seeks a contractor to supply 53–CLAMP, LOOP, with strict requirements tied to military specifications and quality assurance standards. The work falls under NAICS code 332510 and is subject to a small business size standard of 750 employees. The contractor must comply with MIL-STD-130 for item marking and maintain a quality control system compliant with Mil-I-45208A, Mil-Q-9858, or ISO 9000/9001/9002 equivalents. All inspections, repairs, and testing procedures must be documented, approved by the Government, and supported by sequential diagrams and performance specifications. The contractor is responsible for inspecting all purchased materials against the Technical Data Package, maintaining detailed records for at least 12 months, and implementing controls for nonconforming material, including segregation and disposition protocols. The Internal Review Board has limited authority for minor rework but cannot approve “AS-IS” dispositions, which remain under Government control via the Material Review Board. Repair assessment testing by Government personnel may occur quarterly on randomly selected items, and complete historical records—including inspection data, repair cards, part replacements, and test results—must be maintained by serial number and made available upon request. The contract includes mandatory compliance with several federal and DoD regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and equal opportunity requirements for workers with disabilities. Warranty coverage extends one year after delivery, with defects to be reported within 45 days of discovery. All invoices and receiving reports must be submitted via the Wide Area Workflow system, and use of the Workflow Pro Assist Module is required. The contractor must submit royalty information, adhere to priority ratings for national defense use, and certify compliance with Federal Acquisition Regulation clauses, including annual representations and certifications. The point of contact for inquiries is Deja S. Thompson-Mitchell, reachable via email, with proposals due by August 24, 2026. Packaging must conform to MIL-STD-2073, and all work is to be performed in accordance with the Statement of Work, regardless of whether specific inspection clauses are explicitly listed. Failure to meet any requirement may result in rejection of deliverables, even under sampling protocols, as the Government reserves the right to reject known defective items.

Hardware Manufacturing

POSTED

DEADLINE

49--FILLER AND BLEEDER,The contract solicitation NSN 1R-4920-012695376-SX seeks three units of a filler and bleeder component under solicitation number N0038326QPC09, with delivery terms set at FOB origin. The requirement is managed by the Navy Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and is posted as a presolicitation with responses due by September 8, 2026. Offerors must ensure that the product, manufacturer, or themselves meet all qualification requirements at the time of award, as governed by FAR clause 52.209-1, and must verify compliance through approved military and federal specifications available via ASSIST-Online or the DoD Single Stock Point. The Government is not applying commercial item acquisition policies under FAR Part 12, but interested parties may still propose commercial alternatives within 15 days of this notice if capable of meeting technical requirements. All documentation referencing patterns, drawings, or deviations is not available at DODSSP and must be obtained through alternate channels. For inquiries, potential bidders may contact the primary point of contact, Shamus F. Roache, via email or phone as listed.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

in about 1 month

99--DUCT,EXTRACTOR OUTLThe government is seeking to procure two units of a flight-critical extractor duct under NSN 1R-9999-LLJMPZ995-QE and REF NR 821312-2, with delivery terms FOB origin, due to the absence of sufficient, accurate, or legible technical data that would permit acquisition through full and open competition. Only sources previously approved by the Government for this item have been solicited, as the technical nature of the part and its critical role in flight systems necessitate source approval prior to contract award. The time required to evaluate and approve a new source would delay delivery beyond mission-critical timelines, so the procurement will proceed under the authority of FAR 6.302-1, allowing sole-source negotiation. All prospective offerors, regardless of prior approval status, must submit complete source approval documentation as detailed in the NAVSUP Weapon Systems Support brochures, either demonstrating existing experience with similar items or providing full technical data for new manufacturers. Offers lacking required documentation or proof of a pending approval request will be deemed nonresponsive. Approval evaluations underway must be substantiated with a copy of the cover letter forwarded to NAVSUP WSS. The solicitation number is N0038326QNA54, with a response deadline of July 30, 2026, and is published as a presolicitation notice allowing all responsible sources to express interest or submit proposals within 45 days, or 30 days if awarded under an existing Basic Ordering Agreement. While this notice is not a request for competitive bids, submissions received within the timeframe will be evaluated to determine whether competition is feasible; however, the Government retains full discretion to proceed without competition based on fleet support needs and technical constraints. Technical documents such as military specifications, qualified product lists, and standards can be obtained via ASSIST-Online or the DoD Single Stock Point, though drawings, patterns, and deviation lists are not available there. The primary point of contact for inquiries is Arianna G. Pilla of the Department of Defense, Navy Supply Systems Command, and all communications must reference the official SAM.gov listing for this requirement.

POSTED

DEADLINE

70--MEMORY UNIT,AIRCRAF, IN REPAIR/MODIFICATION OFThe contract solicitation NSN 7R-7010-015350456-QE seeks 58 memory units for aircraft in repair or modification, with delivery terms set at FOB origin. The item is associated with TDP version 002 and falls under a presolicitation by the Naval Supply Systems Command Weapon Systems Support, a division of the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by September 8, 2026. The office is located in Philadelphia, Pennsylvania, and the point of contact is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983. No set-aside classification or NAICS code is specified, and the place of performance details are not provided, indicating that delivery responsibility rests with the vendor at the point of origin.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--REEL,SHOULDER HARNEThis solicitation, identified as N0038326QFA99, is a total small business set-aside for the procurement of a reel shoulder harness under NAICS code 336413, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania. The requirement is subject to mandatory source approval, meaning all offerors must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure to be eligible for award; failure to do so will disqualify the proposal. The Government has determined that no other source can currently meet its needs due to insufficient or inadmissible data, and award may proceed based on fleet support requirements if source approval cannot be finalized in time. The solicitation mandates compliance with numerous federal regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and the mandatory use of Workflow Pro’s Assist Module, alongside specific payment and identification instructions. The contract is awarded based on best value, evaluating price, capacity/delivery capability, and past performance. Offers must be submitted electronically via email to kate.n.schalck.civ@us.navy.mil no later than August 24, 2026, at 8:30 p.m. Eastern Time. The Government accepts proposals via email as binding agreements upon acceptance, and all awardees must comply with the requirements for item unique identification, valuation, and royalty information as specified. The point of contact for inquiries is Kate N. Schalck, with a direct phone number provided, and all correspondence must reference the solicitation number and adhere strictly to the detailed compliance obligations outlined.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

99--RECEIVER TRANSMITTE, IN REPAIR/MODIFICATION OFThis contract solicitation, identified by NSN 0R-0098-LLZ98S445-CC and solicitation number N0038326RSB22, seeks a sole source procurement for 10 units of a receiver transmitter to be repaired or modified, with delivery terms set at FOB origin. The Government has determined it lacks sufficient, accurate, or legible data to procure from any other source, making this requirement exclusively available to the current provider. Items under this acquisition are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, requiring compliance with relevant international procurement rules. Government Source Approval is mandatory prior to award, and offerors who are not pre-approved must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure; failure to include all required information will result in disqualification. The solicitation was posted on July 24, 2026, with proposals due by September 8, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support office located in Philadelphia, Pennsylvania. The contract becomes effective upon the Government’s acceptance of the contractor’s proposal through electronic transmission, mail, or fax, and all inquiries should be directed to the listed point of contact.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

66--TRANSMITTER,PRESSURThe contract pertains to the procurement of a transmitter, pressur, under solicitation number N0038326QSB19, issued by the Naval Supply Systems Command Weapon Systems Support and falls under NAICS code 334513 for communications equipment manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 24, 2026, and requires offers to comply with mandatory government regulations including Buy American provisions, security prohibitions, and warranty terms for noncomplex supplies, which include a 12-month warranty with a 60-day window for defect discovery. All proposals must adhere to the mandatory use of Workflow Pro with the ASSIST module and include complete source approval documentation as defined in the NAVSUP WSS brochure, as the items require prior government source authorization—failure to provide all required data will result in disqualification. Payment instructions mandate the use of the Invoice and Receiving Report Combo Type through Wide Area Workflow, and transportation of supplies must comply with sea transport specifications. The contract also incorporates requirements for equal opportunity for veterans and workers with disabilities, value engineering considerations, and integrity of unit pricing, with no set-aside type specified. A notice of priority rating for national defense and emergency preparedness applies, emphasizing urgency. Point of contact information is listed as Charles F. Horan, reachable via email or telephone, and the place of performance and office address are in Philadelphia, Pennsylvania. Additional clauses cover royalty obligations, transportation by sea, and annual representations and certifications under a recent deviation, all of which must be satisfied. Offers must fully meet the source approval criteria, as incomplete submissions will not be considered for award, and the government may proceed based on fleet support needs if timely approval cannot be secured.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE