Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

TF33 Inlet Guide Vanes Rubber Burnout Heat - Treat Repair Services

Active
FA813224Q0038Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Air Force plans to issue a firm fixed price, single source purchase order to Chromalloy Gas Turbine LLC for the provision of TF33 Inlet Guide Vanes Rubber Burnout Heat-Treat Repair Services. This contract will support the Oklahoma City Air Logistics Complex and covers the period from October 1, 2024, to September 30, 2025. The procurement will be conducted under the authority of DAFFARS 5313.501 and the applicable NAICS code is 336412, which pertains to aircraft engine and engine parts manufacturing, with a size standard of 1,500 employees. Chromalloy Gas Turbine LLC, located in Windsor, Connecticut, and registered with CAGE Code 00986, has been identified as the single source contractor for this requirement. Interested parties must be registered in the System for Award Management (SAM) to participate, as contractor registration with an active CAGE Code is mandatory prior to contract awards per FAR 4.11. Quotes and relevant information must be submitted electronically through SAM.gov, as telephone inquiries are not permitted. The contract is managed by the Department of Defense office at Tinker Air Force Base in Oklahoma, with Patrick Campbell serving as the point of contact for this procurement. The solicitation was posted on July 26, 2024, and emphasizes compliance with electronic procedures for submission.

General Info

Air Force awards fixed-price repair contract to Chromalloy Gas Turbine LLC for FY2025.

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Tinker AFB, OK, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8132 Afsc Pzimc
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3303, USA
Office AddressTINKER AFB, OK, 73145-3303, USA
Contacts
Patrick Campbell

Full Description

Show more
The Air Force intends to solicit and award a firm fixed price, single source purchase order to Chromalloy Gas Turbine LLC (Windsor, Connecticut; CAGE CODE 00986), under the authority of DAFFARS 5313.501 (10 U.S.C. 3572), for the TF33 Inlet Guide Vanes Rubber Burnout Heat - Treat Repair Services for the Oklahoma City Air Logistics Complex (OC-ALC) for the period of 1 Oct 2024 - 30 Sep 2025. The NAICS code for this requirement is 336412 with a size standard of 1500 employees. Contractor registration in the System for Award Management (SAM) - which results in receiving a unique, active CAGE Code - is required prior to receiving any contracts or orders from the Government in accordance with FAR 4.11. Contractors can register electronically at https://sam.gov/. Interested persons may identify their interest and capability to respond to the requirement by submitting a quote and information. Electronic procedures will be used for this solicitation through SAM at https://sam.gov/. No telephone requests.

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
BELLOWS, PRESSURE
Solicitation # SPE7L3-27-T-1580
Solicitation SPE7L3-27-T-1580 is a small business set-aside procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 21 units of pressure bellows, identified by NSN 3010012005475 and Woodward Inc. part number 5216-146. This critical application item is classified as a commercial product under NAICS code 336412. The contract specifies a delivery timeline of 666 days after order, with a need ship date of September 6, 2028, and an original required delivery date of May 24, 2029. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical requirements take precedence. Palletization must comply with RP001. Key regulatory requirements include a prohibition on Class I ozone-depleting chemicals and mandatory compliance with CMMC Level 2 self-assessment and NIST SP 800-171 standards for cybersecurity. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
HOUSING ASSEMBLY
Solicitation # SPE4A5-27-T-2088
Solicitation SPE4A5-27-T-2088 is a request for quotation issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of one Housing Assembly, identified by NSN 2840001690069 and part number 3020137. This is a Foreign Military Sales requirement for Turkey, with a required delivery date of October 27, 2026, and a delivery lead time of 20 days after order. The item is designated as a critical application item, and the contract specifies FOB Origin terms. Shipping is coordinated through A.J. Worldwide Services in Secaucus, New Jersey, for final delivery to the 5th Main Maintenance Factory Directorate in Guvercinlik, Turkey. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement is governed by a variety of FAR and DFARS clauses, including those related to cybersecurity, safeguarding covered defense information, and the prohibition of hexavalent chromium.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → FA8132 Afsc Pzimc

Same awarding agency

NAICS: 333914
New
Federal
SERFILCO PUMPS FOR PLATING SHOP
Solicitation # FA813227Q0004
The Air Force Sustainment Center Maintenance Contracting Branch at Tinker Air Force Base, Oklahoma, is soliciting quotes for a Firm Fixed Price contract to procure 18 Serfilco pumps for a plating shop located in Building 3001. This is a brand-name requirement, meaning substitute or equal items are not permitted, as the specific Serfilco pumps are required for chemical compatibility and to fit existing tank configurations. The procurement includes 6 units of P-51-0731-K1TF, 2 units of P-51-0732-K1TF, 5 units of P-51-0943-L1TF, and 4 units of P-51-2532-D1TF. These self-priming magnetic coupled pumps feature housings made of non-metallic glass reinforced polypropylene and carbon reinforced polyvinylidene fluoride, with EPDM elastomers and alumina ceramic components. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 333914. Award will be granted to the responsible offeror providing the lowest total evaluated price, with the government evaluating the lowest three quotes based on technical merit, administrative compliance, and contractor responsibility. Quotes must be submitted via email to Bridgette Miles by November 11, 2026, and must remain valid for at least 90 days. All offerors must be registered in the System for Award Management. Delivery is required FOB Destination to Tinker AFB, and invoicing must be processed through the Wide Area Workflow application with default payment terms of Net 30.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333514
Federal
P&W Tooling Evaluation and Repair
Solicitation # PZIMCPWASSS
The Department of Defense, through the AFSC PZIMC at Tinker Air Force Base, Oklahoma, is conducting a sources sought synopsis under solicitation PZIMCPWASSS to identify qualified contractors for the evaluation and remedial maintenance of Pratt and Whitney (P&W) specific tooling. The scope of work involves the inspection and repair of 24 unique part numbers of PWA support equipment and tools, requiring all work to be performed in accordance with original equipment manufacturer specifications and applicable P&W technical data, engineering drawings, and manuals. Interested sources must demonstrate the ability to certify that repairs meet these technical standards and provide detailed inventory records and reporting on repair status. This market research effort seeks vendors with established quality programs, such as ISO 9001 or AS9100, and the necessary expertise to handle specialized tooling under NAICS code 333514. Respondents must submit a Contractor Capability Survey by November 5, 2026, providing comprehensive business information, including CAGE codes and socioeconomic status, along with detailed responses regarding their technical capabilities and past experience. Primary points of contact for this effort are Roger Farris and Sherry Harvey-Tuley. Security clearance levels and foreign participation restrictions have not yet been determined.
Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

10 days ago

DEADLINE

in 6 days
View Details
NAICS: 611512
Federal
FOD/DOP and Safety Training Program DeliveryThe contract pertains to the development and delivery of Foreign Object Debris and Damage Prevention training tailored for crane operators and maintenance personnel, strictly aligned with Air Force Instructions. The training program is designed to enhance safety, reduce operational risks, and ensure compliance with standardized military protocols across facilities where heavy equipment is in use. It is structured as a subcontract under a Total Small Business Set-Aside, ensuring eligibility and participation by small businesses as defined by the SBA and FAR 19.5 regulations. The North American Industry Classification System code 611512 confirms the focus on professional and technical training services. Performance of the contract is centered in Oklahoma City, with the work to be executed at or near the designated Air Force installation under the FA8132 AFSC PZIMC oversight within the Department of Defense. The solicitation, posted in April 2026, indicates an upcoming opportunity for qualified small businesses to bid on providing comprehensive, field-relevant safety instruction that integrates practical techniques for identifying, preventing, and mitigating FOD and DOP incidents. There is no specified point of contact or detailed address, emphasizing the need for vendors to initiate direct engagement through the provided SAM.gov link for full submission requirements and technical expectations.
Flight Training

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS