Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Thermal Drying Oven Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of one Thermal Drying Oven identified by NSN 4430-01-668-9983 to DLA Distribution San Diego for final delivery to the USS JACK H. LUCAS (DDG 125). The contractor is required to adhere strictly to all military packaging, labeling, and shipment standards to ensure compliance with Department of Defense protocols. The item is classified under NAICS code 333291, indicating it falls within the category of other commercial and service machinery manufacturing, and the contract is structured as a subcontract under the Defense Logistics Agency. The solicitation was posted on July 20, 2026, and the delivery destination is explicitly tied to a specific naval vessel, underscoring the mission-critical nature of the equipment. All aspects of fulfillment must meet exacting military logistics requirements without deviation.

General Info

Supply one Thermal Drying Oven to USS JACK H. LUCAS per military packaging and DoD shipment standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

333291 - Paper Industry Machinery Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8E8-26-T-2159.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

OVEN, THERMAL DRYING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of one Thermal Drying Oven (NSN: 4430-01-668-9983) to DLA Distribution San Diego for ultimate delivery to USS JACK H. LUCAS (DDG 125). Contractor must comply with military packaging, labeling, and shipment standards.

Similar Contracts

Same NAICS industry code

Bond Multi-Purpose Paper SupplierThis subcontract agreement establishes a partnership for the supply of high-grade 20 wt Bond Multi-Purpose Paper to support prime contractors working on Alpine School District warehouse projects. The scope of work includes the delivery of paper in both 8-1/2 x 11 and 11 x 17 sizes, ensuring full compatibility with laser printers and high-speed copiers. All materials must be delivered FOB in reams and cases. A critical requirement of this contract is the strict mandate for domestic sourcing. Suppliers must provide the specific names of the mills used, as international paper is explicitly prohibited. The solicitation was posted on October 19, 2026, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Automated Optical Assembly and AlignmentThis subcontract through the NASA SBIR/STTR Program focuses on the development and implementation of automated systems designed for the high-precision and high-yield assembly and alignment of VWV components. The project requires specialized technical execution within cleanroom environments to ensure the integrity and accuracy of the optical assembly process. The opportunity is designated as a Total Small Business Set-Aside, specifically mandated for SBIR/STTR participants with fewer than 500 employees. Performance for this contract is centered in Pasadena, California, under NAICS code 333291.

NASA SBIR/STTR Program

POSTED

DEADLINE

Supply of Biosafety CabinetsThe contract entails the procurement, packaging, and timely delivery of four Fisher Scientific biosafety cabinets to a Department of Veterans Affairs facility, with full logistics coordination managed to ensure seamless transport and receipt. The equipment is critical for safe handling of biological materials and must meet specified standards for functionality and compliance. The solicitation falls under the NAICS code 333291, indicating classification within other commercial and service industry machinery manufacturing, and is structured as a subcontract under the 247-NETWORK Contract Office 7. While specific delivery timelines and technical requirements are not detailed here, performance is expected to align with federal procurement standards and VA operational needs. The contract was posted on July 28, 2026, and the place of performance is designated to a VA facility, though exact location details are not provided. All aspects of packaging, handling, and delivery must ensure the integrity of the biosafety cabinets during transit and upon arrival.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Industrial Process Equipment InstallationThe contract entails the installation of new conveyors, dryers, and sorting systems designed to increase daily meat processing capacity from 65 to 180 tons within a food-grade environment, ensuring compliance with strict hygiene and safety standards. The project focuses on upgrading industrial processing infrastructure to meet higher production demands while maintaining the integrity of the food-handling workflow. All equipment must be integrated seamlessly into existing operations and certified for use in regulated food production settings. This subcontract is categorized under NAICS code 333291 and is tied to a project managed by Madera County in California, with the work to be performed in the city of Madera. The contract was posted on May 29, 2026, and is accessible through the provided state portal, indicating its alignment with public infrastructure or facility enhancement initiatives. The scope demands precision in installation to support continuous, high-volume operations without compromising food safety protocols or operational efficiency.

POSTED

DEADLINE

Service Support Equipment SupplyThe contract is for the supply of service support equipment dedicated to the maintenance and operation of the Fluke Azima DLI Trio vibration analysis system within naval environments. This subcontract aims to ensure that critical diagnostic tools remain functional and operationally ready for use in maritime settings, supporting the detection and analysis of mechanical vibration issues in naval assets. The equipment provided will enable timely and accurate condition monitoring, contributing to preventive maintenance strategies and overall fleet readiness. Performance of this contract is centered in Everett, Washington, with the award managed under the Department of Defense through DLA Maritime - Puget Sound. The North American Industry Classification System code 333291 indicates the work falls within the category of other commercial and service industry machinery manufacturing, suggesting the equipment involved may include specialized diagnostic tools, accessories, or calibration hardware tailored to the Fluke Azima DLI Trio system. As a subcontract, the work supports an existing larger contractual framework, and the solicitation was posted on May 8, 2026, with no set-aside type specified, meaning it is open to all eligible contractors regardless of business size or status.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Special Tooling (ST) and Special Test Equipment (STE) Supply and MaintenanceThe contract involves the design, supply, calibration, and ongoing maintenance of specialized tooling and test equipment essential for the assembly, testing, and sustainment of Tomahawk missiles. This work supports critical defense operations by ensuring precision and reliability throughout the missile lifecycle, from production to field maintenance. The equipment must meet exacting military standards to facilitate accurate handling, functional verification, and diagnostic capabilities unique to the Tomahawk system. The contract is positioned as a subcontract under the Naval Air Systems Command, a division of the Department of Defense, with the place of performance located in Tucson, Arizona, at zip code 85756. The North American Industry Classification System code 333291 identifies the scope as other industrial machinery manufacturing, indicating a focus on custom-built, non-standard equipment. Although the solicitation number and point of contact are not provided, the contract was posted on April 24, 2026, signaling an upcoming procurement cycle aimed at securing critical support infrastructure for naval aviation systems.

Naval Air Systems Command

POSTED

DEADLINE

Precision Machine Tool Component Supply

POSTED

DEADLINE

Packaging & Labeling Equipment SupplyThis contract involves the supply of advanced packaging and labeling equipment, specifically barcode printers, label applicators, and verification systems designed for high-resolution printing. These systems must be capable of seamless integration into pharmaceutical production lines to ensure compliance with the Drug Supply Chain Security Act (DSCSA). The equipment is critical for maintaining traceability and verification standards within pharmaceutical manufacturing. The contract is issued as a subcontract by the Department of Defense, through the DLA Troop Support agency. The place of performance is located in Charlotte, with the postal code 28206. The product category falls under the NAICS code 333291, which pertains to packaging machinery manufacturing. This procurement supports the enhancement of pharmaceutical labeling processes on military or government-related projects, ensuring that supplied goods meet regulatory requirements and technical specifications.

DLA Troop Support

POSTED

DEADLINE

Manufacturing Equipment Installation and ValidationThis subcontract, titled Manufacturing Equipment Installation and Validation, involves the supply and installation of specialized equipment for ODF production. The scope of work specifically includes the implementation of coating, drying, and packaging systems, with a critical requirement for validation to ensure full GMP compliance. The project is associated with Lake County, California, and will be performed in the 95453 zip code area. Classified under NAICS code 333291, the contract was posted on October 30, 2025, and focuses on the technical integration of manufacturing systems within a regulated environment.

POSTED

DEADLINE

Custom Tooling Package for CNC Machine

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lighting and Electrical_Solicitation SPE4AX26R0018

Solicitation # Lighting_and_Electrical_GENI

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4AX26R0018 for lighting and electrical requirements. This opportunity is categorized under NAICS code 335999 and is specifically designated as an 8(a) set-aside. The solicitation was officially posted on October 23, 2026, and is managed by the agency's office located in Richmond, Virginia. Interested parties must submit their proposals by the deadline of February 22, 2027. The solicitation is available for access through the DLA Internet Bid Board System. Primary coordination for this requirement is handled by Jessica Ozmore (Rackley), with Gary Miller serving as the secondary point of contact.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for Face Plate Assemblies to support prime contractors on aerospace contracts. The scope of work requires strict adherence to MIL-STD-2073-1E (QWP001) for packaging and MIL-STD-129 for marking, specifically including Special Marking Code 32 to denote a 60-month shelf life. Additionally, the provider must palletize all shipments according to RP001 requirements to ensure they are delivery-ready. The performance of these services will take place in Fort Worth, Texas, under NAICS code 488510. Interested parties should note that the response deadline for this opportunity is October 29, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Specialized Material Supply for Face Plate AssemblyThis subcontract involves the supply of raw materials to prime contractors for the manufacture of Face Plate Assemblies under Defense Logistics Agency aerospace contracts. The supplier is responsible for sourcing materials in strict accordance with TDP Rev C Gen 3 and all applicable reference drawings, with a mandatory requirement to ensure that no Class I Ozone Depleting Chemicals are used in the process. The scope of work includes providing comprehensive material certifications and Mill test reports to verify quality and compliance. All certified raw materials must be delivered directly to the designated fabrication facility located in Fort Worth, Texas. This effort falls under NAICS code 332710 and supports Department of Defense aerospace requirements.

POSTED

DEADLINE

Face Plate Assembly ManufacturingThis subcontract for the Defense Logistics Agency involves the precision fabrication and assembly of 121,000 Face Plate Assemblies. The work must be performed in accordance with TDP Rev C Gen 3 and Basic Drawing 81361 806881-05 Rev F, with the place of performance located in Fort Worth, Texas. The scope of work includes the execution of both Contractor First Article Testing and Production Lot Testing to ensure technical compliance. To qualify for this contract, the provider must maintain SAE AS9100 quality systems and hold CMMC Level 2 certification. The project falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supplier of Black Sealing Compound (NSN 8030-12-356-0738)This subcontract involves the supply of black sealing compound, identified by NSN 8030-12-356-0738, to prime contractors supporting Defense Logistics Agency contracts for the US Army at Hunter Army Airfield. The requirement consists of two 310ml units of the compound, which must be maintained in climate-controlled storage between 41 and 77 degrees Fahrenheit. The supplier must adhere to strict regulatory and shipping standards, including MIL-STD-2073-1E, MIL-STD-129, RP001, and IP025 for hazardous materials. Additionally, the contract mandates compliance with 29 CFR 1910.1200 and NIST SP 800-171 security standards. This opportunity falls under NAICS code 332410 and is managed through the Department of Defense.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves providing specialized waterproof, greaseproof, and opaque UV-protected packaging for cylinders to prevent material deterioration. The service provider is responsible for applying all necessary markings, including CAGE codes and part numbers, in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverable consists of fully packaged and marked cylinders that are ready for immediate shipment.

Motor Vehicle Towing

POSTED

DEADLINE

Oxygen Cleaning and Hydrostatic Testing ServicesThis subcontract for Oxygen Cleaning and Hydrostatic Testing Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves performing specialized oxygen cleaning, periodic re-hydrotesting, and valve overhauls utilizing hydrostatic pressure testing equipment. All processes must strictly adhere to MIL-STD-1330E standards for the cleaning and packaging of oxygen systems to ensure safety and compliance. The selected provider is responsible for delivering certified clean and hydro-tested cylinders accompanied by detailed test reports. This requirement falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of October 28, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Diving Air Cylinder Assembly SupplierThis subcontract involves the supply of five specialized air cylinder assemblies for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4220-01-451-6470 and Part Number 4059311. Critical compliance requirements include ensuring all assemblies are asbestos-free in accordance with FED-STD-313 and providing a Certificate of Conformance as mandated by FAR 52.246-15. The project falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Traceable Freight Transport (Annville, PA)This subcontract involves the transport of heavy industrial steel materials for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the hauling of 12-foot steel bars, weighing approximately 42.73 lb/ft, using flatbed or specialized industrial equipment. All shipments must be traceable and delivered to a government facility located in Annville, Pennsylvania, by the specified delivery date. The opportunity is categorized under NAICS code 484220 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 2, 2026. Performance of the contract will take place in Annville, Pennsylvania, zip code 17003-0000.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supplier of 4140 Cold Finished Steel BarThis subcontract involves the supply of 4140 cold finished, round, and annealed steel composite metal bars to prime contractors supporting Defense Logistics Agency supply contracts. The required materials must have a 4.000 inch diameter and lengths between 10 and 12 feet, and must be delivered with Mill-Material Certification. Performance for this contract will take place in Annville, Pennsylvania, under NAICS code 331110. To be eligible, suppliers must maintain a QSLD listing for FSGs 95 and 96. The contract mandates strict adherence to several regulatory and quality standards, including the Buy American Act, the Berry Amendment, MIL-STD-129, and ASTM A700. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Valve Hydrostatic Testing and Quality ValidationThis subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Testing Laboratories and Services

POSTED

DEADLINE

Industrial Wear Coating ServicesThis subcontract for Industrial Wear Coating Services involves the application of specialized wear coatings to four 12-inch gate valves for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes surface preparation and coating application in strict accordance with the technical data package, with a specific prohibition on the use of Class I Ozone Depleting Chemicals. Performance will take place in Norfolk, Virginia. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. To ensure quality and security, the provider must maintain ISO 9001 or AS9003 quality standards and strictly comply with ITAR and EAR export control regulations. Responses to this solicitation are due by November 2, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS