Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Thermal Insulation Blanket Manufacturing

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture of 62 thermal insulation blankets designed to meet stringent military and industry standards, incorporating aluminum foil, corrosion-resistant steel sheet, and heat-resistant silica as primary materials. These blankets must fully comply with MIL-STD and ASTM specifications to ensure performance under extreme thermal and environmental conditions, typical of defense and aerospace applications. The work is being procured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, indicating the critical nature of the end use and the high degree of quality control expected. The solicitation was posted on July 27, 2026, with a response deadline of August 7, 2026, allowing potential suppliers a limited window to submit proposals. The NAICS code 333611 identifies this as a contract within the heating equipment manufacturing sector, specifically pointing to the production of industrial and commercial heating equipment components. Although detailed point of contact and performance location information is not provided, the requirement is clearly directed toward suppliers capable of delivering precision-engineered thermal insulation products to federal defense standards, with no set-aside provisions indicated, meaning it is open to all qualified vendors.

General Info

Manufacture 62 military-grade thermal blankets meeting MIL-STD and ASTM specs using aluminum, steel, and silica.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 62 thermal insulation blankets with aluminum foil, corrosion-resistant steel sheet, and heat-resistant silica, meeting MIL-STD and ASTM specifications.

Similar Contracts

Same NAICS industry code

PARTS KIT, COOLING TThe contract pertains to the procurement of a Parts Kit for a Cooling Turbine identified by NSN 1660-01-161-9773, with a quantity of 134 units to be delivered within 300 days after contract award. Manufacturing may require casting or forging processes, and the government does not necessarily possess the associated special tooling, necessitating potential assistance requests through DLA’s Casting and Forging Assistance portal. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with compliance enforced through multiple contract clauses including tailored higher-level quality standards, inspection and acceptance at origin, and strict adherence to DLA packaging guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required unless otherwise specified, and attributes are categorized with defined verification levels or AQLs. The contract mandates CMMC Level 2 certification for third-party assessors, physical identification marking of items, and compliance with measures for covered defense information. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. entities or subsidiaries, regardless of location. DFARS 252.225-7048 applies, and DLA restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have received official approval from DLA to access controlled information. The solicitation is a total small business set-aside under NAICS code 333611, issued on July 27, 2026, with responses due by August 7, 2026. The contracting activity is under the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Shenita Tirado listed as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

VANE ASSY, COMPR 9THThe contract is for the procurement of a Vane Assembly, Compressor 9th, identified by part number 6876109 and NSN 2835-00-555-7731, with a quantity of two units to be delivered FOB origin within five days of contract award to the General Depot of Naval Supplies in Kaohsiung, Taiwan. The item is designated as a critical application item by Rolls-Royce Corporation and requires strict compliance with technical and quality requirements listed in the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Item Unique Identification is not required per the customer’s request and DFARS 252.211-7003(c)(1)(i). Packaging must meet DLA-specific standards with preservation method 10 (cooling/drying), no preservation material, and container codes E5 for both unit and intermediate containers. Marking must exclude special codes and comply with military standards without the need for hazardous or radioactive labels beyond standard compliance. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Mercury and mercury-containing compounds are strictly prohibited except in functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates multiple FAR and DFARS clauses, including cybersecurity requirements under 252.204-7012 and compliance with NIST SP 800-171 via deviation 2026-O0025, CMMC Level 2 self-assessment, and safeguarding of covered defense information. It also enforces compliance with prohibitions on hexavalent chromium, toxic materials, and acquisition of equipment from Communist Chinese military companies, along with sustainable product and employment eligibility verification requirements. Payment must be submitted via WAWF, with invoice processing governed by wide-area workflow instructions and no unauthorized obligations binding the government.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

INSULATION BLANKET,The contract is for the procurement of 62 thermal insulation blankets, designated by part number 11636406 and NSN 5640-01-083-5423, manufactured from aluminum foil, corrosion-resistant steel sheet, and silica, with a heat-resistant layer thickness between 0.008 and 0.012 inches, intended for use by the U.S. Army Tank Automotive Command. Delivery is required within 20 days after order placement, with the final destination being Busan, Korea, under FOB Destination terms, meaning the contractor assumes all risk until delivery. The estimated contract value is $7,316, based on historical unit pricing, though the solicitation does not explicitly state the unit price. Packaging must adhere to MIL-STD-2073-1E, with specific instructions to use Box EC in Bag BL in Box ED as directed by RD005, and marking and barcoding must follow MIL-STD-129, with no special marking required. Preservation method 32 is mandated, involving cleaning and drying without protective materials. The item is subject to stringent cybersecurity compliance requiring CMMC Level 2 certification for the supplier’s third-party assessment organization, along with multiple DFARS and FAR clauses governing safeguarding covered defense information, cyber incident reporting, prohibition of covered telecommunications equipment, whistleblower rights, trafficking in persons, employment eligibility, and hazardous material handling, including compliance with OSHA’s Hazard Communication Standard and mandatory submission of Safety Data Sheets prior to award. The contractor must also notify the government of any radioactive materials exceeding specified activity thresholds and ensure all labeling meets federal regulations. Invoicing is exclusively required through the Wide Area WorkFlow system, and no alternate payment methods are permitted. Offerors must disclose their Unique Entity ID and CAGE code, and represent their small business status including any applicable socioeconomic designations. The solicitation, issued by the Defense Logistics Agency under number SPE8E6-26-T-3873, was posted on July 27, 2026, with responses due by August 7, 2026, and must be submitted electronically via the DIBBS portal, with no physical submissions accepted. Evaluation factors and the specific basis of award are not detailed in the available documentation, though the nature of the requirement suggests a potential Low Price Technically Acceptable approach. All compliance obligations are non-negotiable, and failure to meet any clause

Defense Logistics Agency

POSTED

DEADLINE

SEAL RINGThe contract pertains to the procurement of a SEAL RING with NSN 2825-01-062-9302, requiring a quantity of two units under solicitation SPE4A6-26-T-09WU, with a response deadline of August 4, 2026, and delivery due 165 days after award. This is a total small business set-aside under NAICS code 333611, administered by the Department of Defense’s ASC Commodities Division, with performance centered in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging, inspection at origin, and removal of government identification from non-accepted items are governed by specific referenced requirements. Item Unique Identification is waived per the Service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Mercury and mercury-containing compounds are strictly prohibited in contact with the supplied hardware except for designated functional uses such as batteries, fluorescent lights, sensors, weapon systems, and approved chemical reagents specified by NAVSEA; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Physical identification and bare item marking must meet specified criteria, and all measuring and test equipment used in production or inspection must comply with applicable standards. The point of contact for inquiries is Stephanie Cruz, reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

VALVE, GOVERNORThe contract pertains to the procurement of one valve governor with NSN 2825-01-219-9251, supplied by Curtiss-Wright Electro-Mechanical Corp under part number 916692, designated as a critical application item. The item must be delivered within 164 days to the distribution depot in Bremerton, WA, with delivery terms set as FOB origin and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 without special codes, and palletization follows DLA packaging standards. The product is subject to strict environmental restrictions: ozone-depleting chemicals are entirely prohibited, and mercury or mercury-containing compounds may not be intentionally introduced except under specific exempted uses such as in certain batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award dates. The contract is issued under solicitation SPE7L5-26-T-4643, with a response deadline in August 2026 and an original delivery requirement of July 2027. Transportation and shipping details are governed by DLA procedural notes, and all items must meet the DoD’s authorized unit of issue standards. Primary point of contact is Randy Ith, reachable via DLA.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Generator Equipment Supply (130 kW Unit)A 130 kW emergency generator, either new or certified used, is being procured for delivery to the Waco site with all necessary components including the fuel system, enclosure, and mounting skid. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and it is classified under NAICS code 333611 for generators and generator sets. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026, at 2:00 PM. The place of performance is specifically identified as Waco, Texas, with a zip code of 76708. The procuring agency is the Department of the Interior, under the MWRA Midwest Region, and the contract is accessible through the SAM.gov platform for further details.

Mwr Midwest REGION(60000)

POSTED

DEADLINE

Supply of Tier 4 Final Compliant Diesel EnginesThe contract seeks the supply of diesel engines certified to EPA Tier 4 Final emissions standards, each requiring a minimum 30-gallon fuel tank, for integration into mobile light towers. These engines must meet strict environmental regulations and be capable of reliable operation in field-deployed lighting systems. The opportunity is structured as a subcontract and is exclusively set aside for small businesses under the SBA’s Total Small Business Set-Aside program, meaning only small business concerns qualify to respond. The North American Industry Classification System code 333611 applies, indicating the requirement aligns with the manufacture of engine and turbine parts. Performance of the work is designated for Coopertown, Tennessee, with a zip code of 37389. Proposals must be submitted by the deadline of July 30, 2026, at 3:00 PM Eastern Time, following the posting date of July 27, 2026. No solicitation number is provided, but the official reference can be accessed via the SAM.gov link. The acquiring activity is the Department of Defense through the FA9101 AEDC PKP Procurement Branch, suggesting the engines will support military or government-operated mobile lighting assets. All submissions must adhere to the small business certification requirements, and the selected vendor will be responsible for ensuring the engines are integrated successfully into the specified mobile light tower platforms without additional modification from the end user.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

DEADLINE

Airboat Propulsion and Engine IntegrationThe contract seeks the supply and integration of a high-performance engine, propeller, and thrust system engineered specifically for operation in extreme off-road environments including ice, mud, and shallow water. The system must be designed to deliver reliable power and maneuverability under harsh conditions where conventional propulsion systems fail, emphasizing durability, efficiency, and adaptability to variable terrain. Integration work includes ensuring seamless compatibility between components and compliance with operational safety and performance benchmarks required for government use in sensitive or remote aquatic and frozen landscapes. This subcontract is designated as a Total Small Business Set-Aside under SBA regulations, restricting eligibility exclusively to small businesses as defined by the Small Business Administration. The NAICS code 333611 indicates the industry classification for engine and turbine manufacturing, aligning the scope with specialized propulsion system development. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, at 8:00 PM, and is managed by the Department of the Interior under Sat Team 2 FWS. While no specific location for performance or point of contact is listed, the project implies field deployment within U.S. federal lands or waterways where such specialized equipment supports conservation, patrol, or research missions.

POSTED

DEADLINE

BEARING ASSEMBLY,TUThis contract pertains to the repair of the BEARING ASSEMBLY,TU under a fixed-price arrangement with strict compliance requirements for quality, inspection, and documentation. The work must adhere to the contractor’s approved repair standards, technical orders, and manufacturer specifications, with all repairs requiring exact alignment to the specified CAGE code 90099 and reference number 1387F17G01. Item marking must follow MIL-STD-130 Rev N, and any changes to design, materials, or part numbers require prior written approval from the NAVICP-MECH Contracting Officer, categorized under one of six code types detailing the nature of the substitution. The contractor is fully responsible for all inspection and testing procedures, ensuring compliance with both government standards and original manufacturer requirements, and must maintain complete inspection records for 365 days after final delivery. The contract mandates adherence to Buy American and Free Trade Agreements, with applicable certification requirements, and includes a total small business set-aside with restrictions on pass-through charges. A one-year warranty covers supplies after delivery, with defects must be reported within 45 days of discovery. Packaging must conform to MIL-STD-2073, and all technical documents referenced must be obtained through authorized DOD channels, with specific procedures for restricted or classified materials. The solicitation is limited to authorized distributors of the original manufacturer, who must provide proof of authorization. The North American Industry Classification System code is 333611, with a small business size standard of 1,500 employees, and the contract was posted on July 27, 2026, with a response deadline of August 24, 2026. All communication and submissions must be directed to the designated point of contact at the Naval Supply Systems Command in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

VALVE, PILOT GOVERNORThe contract is for a single unit of a valve, pilot governor, specifically designated for use in an E/I steam turbine with the NSN 2825-01-214-9012 and part number 916395, supplied by either Siemens Government Technologies or Curtiss-Wright Electro-Mechanical Corp. The item is classified as a critical application and a Navy field level reparable, requiring strict configuration control in accordance with MIL-STD-973. All materials must comply with strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, wrapping materials, and unit container codes, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and delivery is to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered within 165 days of contract award, with a required ship date of January 19, 2027, and an original delivery deadline of January 1, 2029. The procurement is governed by DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L5-26-T-4627, issued under NAICS code 333611 by the Department of Defense, with a single unit purchased at a specified unit price and no variance permitted in quantity.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

SHROUD SEGMENT, TURBThe contract pertains to the procurement of 11 shroud segments for use in a turbine system, identified by NSN 2840-01-689-4848 and part number 5200T09G08, under solicitation SPE4A5-26-T-309M. Delivery is required within five days of award, with all items to be delivered FOB origin and subject to zero variance in quantity. Inspection and acceptance occur at the point of origin, and all packaging must adhere to MIL-STD-2073-1E with specific methods defined for preservation, wrapping, and containment, while marking complies with MIL-STD-129 and includes no special marking code. The item is classified as a critical application item and is subject to stringent quality and configuration control requirements through standardized military specifications and tailored higher-level quality provisions, including compliance with MIL-STD-1916 or equivalent zero-based sampling plans for verification, with critical attributes assigned the strictest acceptance criteria. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including documentation standards for Source Approval Requests, configuration change management via Engineering Change Proposals, and the mandatory removal of government identification from non-accepted supplies. Packaging and shipping must follow DLA procurement guidelines, with freight routed to a designated facility at Cherry Point, North Carolina, and prohibited from using parcel post. The supplier is required to ship via the fastest traceable means, and the contract includes specific logistics identifiers, including a point of contact, delivery deadline of July 20, 2026, and associated program and project codes. All contractual obligations are governed by active DoD acquisition policies, and the unit of issue is defined by standardized ANSI X12 formatting as referenced by official DLA resources.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

RING, PISTONThe contract pertains to the procurement of four CRIMPED EXPANDER RING PISTON RINGS with NSN 2825-01-325-6804 under solicitation SPE7L1-26-T-7858, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 20 days of award, and the purchase request number is 7014948238. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and performance is to occur at FPO, ZIP 09564. Point of contact is Kristina Derry, reachable via email and phone provided, and details are accessible through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

in about 14 hours

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and documentation of cybersecurity controls aligned with NIST SP 800-171 for all systems handling covered defense information, including technical data, delivery schedules, and compliance reports. This effort is critical to ensure the protection of sensitive government information and must be completed according to federal cybersecurity standards. The subcontractor is responsible for fully adhering to the required control families, maintaining accurate documentation, and demonstrating ongoing compliance throughout the contract term. The work is being performed under the auspices of the Defense Logistics Agency within the Department of Defense and falls under NAICS code 541512, indicating it involves computer systems design services. The contract is positioned as a subcontract, and while no specific set-aside designation is provided, performance is expected to meet all applicable federal cybersecurity mandates. Completion of this obligation is essential for maintaining eligibility to handle protected defense information and supporting the broader defense supply chain’s security posture.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.

Engineering Services

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 10 hours ago

DEADLINE

Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Quality Inspection and Source Acceptance at OriginThe contract requires comprehensive quality inspection services at the manufacturer’s facility to support government-origin inspections, ensuring full compliance with AS9100 standards and all specified technical requirements. First-article and batch inspections are mandatory to verify conformance prior to shipment, serving as a critical checkpoint for acceptance by defense logistics authorities. The work is performed under a subcontract tied to the Defense Logistics Agency, operating under the Department of Defense, with the NAICS code 541330 indicating engineering and technical services related to quality assurance. All inspections must align with stringent defense procurement protocols, emphasizing precision, documentation, and traceability throughout the manufacturing process. The contract is active as of July 28, 2026, and is linked to award number SPE7L326P5097.

Engineering Services

POSTED

about 10 hours ago

DEADLINE

Packaging, Labeling, and Kitting Services for DoD DeliverablesThe contract requires the provision of value-added packaging, preservation, labeling, and kitting services for seals intended for use by the Department of Defense, with strict adherence to military packaging and traceability standards. All services must ensure that products are properly prepared, protected, and documented to meet the rigorous operational and logistical requirements of DoD supply chains, including compliant labeling and full traceability throughout the handling process. This subcontract, issued under NAICS code 493190 by the Defense Logistics Agency, is designed to support the secure and efficient delivery of critical components to military operations. The work will be performed in alignment with DoD regulations, though specific performance locations and point of contact details are not provided. The solicitation was posted on July 28, 2026, and the contract is accessible through the DIBBS system under award number SPE7L326P5097.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Supply of Nonmetallic Round Section Seals (NSN 5330015240852)The contract involves the manufacture and delivery of nonmetallic round section seals meeting U.S. military specifications, with a focus on compliance, traceability, and proper packaging and labeling. The product is identified by NSN 5330015240852 and falls under NAICS code 326299, indicating it pertains to other plastics product manufacturing. The work is being procured under a subcontract arranged by the Defense Logistics Agency, a component of the Department of Defense, ensuring the seals meet rigorous military standards for performance and reliability. The contract includes stringent requirements for documentation and supply chain traceability to support quality control and accountability throughout the logistics pipeline. All deliverables must adhere to the specified military specifications, with attention to material composition, dimensional accuracy, and environmental resilience. Proper packaging and labeling are mandatory to ensure safe handling, storage, and identification during transit and use. The place of performance and contact details are not specified, but the contract is accessible via the DLA’s public award system under the reference number SPE7L326P5097. The solicitation was posted in July 2026, indicating this is a forward-looking procurement aimed at securing critical sealing components for defense applications.

All Other Rubber Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of all NIST SP 800-171 cybersecurity controls to ensure compliance with DFARS 252.204-7012, specifically focusing on the development of a comprehensive System Security Plan and a Plan of Action and Milestones document. These deliverables must detail the organization’s approach to protecting controlled unclassified information within its systems, outlining current security postures, identified gaps, and remediation strategies with defined timelines. The work is scoped as a subcontract under the Defense Logistics Agency, Department of Defense, and is tied to the NAICS code 541512 for computer systems design services, indicating the need for technical expertise in cybersecurity architecture and documentation. Implementation must align precisely with federal cybersecurity standards, requiring thorough assessment of existing controls, gap analysis, and coordinated efforts across technical and administrative teams to achieve full compliance. Documentation must be accurate, up to date, and capable of withstanding audit scrutiny, with all measures designed to safeguard federal contract information. The contract does not specify a place of performance or point of contact, suggesting flexibility in execution location while maintaining strict adherence to DoD cybersecurity requirements. The solicitation was posted in 2026, indicating the timeline for performance is likely to begin shortly thereafter, with all deliverables due within a timeframe consistent with federal acquisition obligations.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Transportation and Delivery to DLA New CumberlandThe contract specifies the transportation and delivery of packaged retainers to DLA Distribution in New Cumberland, Pennsylvania, under FOB Destination terms, meaning the supplier retains responsibility for all costs and risks until the goods arrive at the designated delivery point. Invoicing must be processed through the Web-Based Acceptance and Fulfillment system, ensuring standardized and efficient payment processing. Compliance with a 77-day Average Days to Outstanding (ADO) requirement is mandatory, emphasizing timely and accurate fulfillment and documentation to meet Defense Logistics Agency performance benchmarks. The procurement is classified under NAICS code 484220, indicating it pertains to truck transportation of freight, and is structured as a subcontract within the Department of Defense’s logistics framework, with no set-aside provisions specified. The contract was posted on July 28, 2026, and is managed through the DIBBS portal under contract number SPE7L326V4410.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

Military Property and Shipment MarkingThis contract requires full compliance with MIL-STD-129 and MIL-STD-130N standards for the proper marking of military property prior to shipment, ensuring accurate identification and traceability throughout the defense logistics chain. All items must be labeled with data matrix codes and unique item identification (UID) tags that meet stringent Department of Defense specifications, enabling automated tracking and inventory management across military supply systems. The work encompasses the application of these markings on equipment, containers, and packaging in accordance with government-mandated protocols for uniformity and durability under operational conditions. The contract is classified as a subcontract under NAICS code 541990 and is managed by the Defense Logistics Agency, a component of the Department of Defense. Although specific performance locations and contact details are not provided, the scope is tied to the broader mission of standardizing military property identification to support logistics efficiency and accountability. The contract was posted on July 28, 2026, and is accessible through the DIBBS system via the referenced UI link, indicating it is part of an active procurement process aimed at securing compliant marking services from qualified subcontractors.

All Other Professional, Scientific, and Technical Services

POSTED

about 10 hours ago

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of retainers in strict compliance with MIL-STD-2073-1E standards, utilizing MIL-DTL-117 Type II, Class C, Style 1 bags and preservation method 33, which specifies CLNG/DRY conditions to ensure long-term protection against environmental degradation. All items must be prepared, sealed, and labeled according to military specifications to maintain readiness and integrity during storage and transportation. Palletization must adhere to RP001 guidelines to ensure structural stability, efficient handling, and compatibility with military logistics systems. The work is being conducted under a subcontract for the Defense Logistics Agency, a branch of the Department of Defense, and falls under NAICS code 493130, which pertains to warehousing and storage services. The contract was posted on July 28, 2026, with performance location and specific delivery details not specified in the available data, but execution is expected to meet rigorous defense standards for inventory management and deployment readiness.

Farm Product Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Labeling and Safety Data ComplianceThe contract pertains to the development and validation of hazard labels and Safety Data Sheets that meet OSHA compliance standards for hazardous materials utilized in production or packaging operations. The work involves ensuring all labeling and documentation accurately reflect the chemical properties, risks, handling procedures, and emergency measures required by federal regulations, with a focus on aligning with OSHA’s Hazard Communication Standard. The deliverables must be technically accurate, consistently formatted, and verified through validation processes to guarantee regulatory adherence across all applicable materials. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 541380 for other scientific and technical consulting services. The contract was posted on July 28, 2026, and the scope of performance is not geographically restricted, though the work is tied to defense-related production or packaging activities. Compliance with federal safety regulations is critical, and failure to meet OSHA requirements could result in rejection of deliverables or operational disruptions. The subcontractor must possess expertise in chemical safety documentation and understand the unique demands of defense-sector supply chains.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE