THERMOMETER, DIGITAL, FO

THERMOMETER,DIGITAL,FOOD SERVICE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
WEBER SCIENTIFIC INC
U/I = EACH
WEBER SCIENTIFIC, INC. 0HST1 P/N 3029-84
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018224798 0001 EA 12.000
NSN/MATERIAL:6685015290535
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
SPE4A5-26-T-423R
SECTION B
PR: 7018224798 PRLI: 0001 CONT’D
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/
OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
PACKAGING AND PACKING SHALL BE COMMERCIAL,
AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER. WHEN
REQUIRED, UNIT CONTAINER SHALL CONTAIN
INTERNAL FITTINGS, WRAPPING, CUSHIONING,
ETC., CAPABLE OF PROTECTING THE CONTENTS
FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
MIL-STD-147. UNITIZED LOADS SHALL BE USED
WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE
DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE
UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY
PALLETS. PALLET SHALL HAVE A LENGTH OF 40
INCHES AND A WIDTH OF 48 INCHES. PALLET
LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED
54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND
52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF
LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT
BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE
ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
SPE4A5-26-T-423R
SECTION B
PR: 7018224798 PRLI: 0001 CONT’D
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
SPE4A5-26-T-423R
SECTION B
PR: 7018224798 PRLI: 0001 CONT’D
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R21041
USS ALABAMA SSBN 731
UNIT 100112 BOX 1
FPO AP 96698
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21041
USS ALABAMA SSBN 731
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R2104162396155
RDD: 777
PROJ: XP5 TP 2
SUPP ADD: YNSS02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 04
DIC: A4A DIST: E9B ADV: 2A FC: MC
Need Ship Date:00/00/0000 Original Required Delivery Date:09/11/2026
SPE4A5-26-T-423R NSN/Part Number: 6685-01-529-0535 Quantity: 12 EA Purchase Request: 7018224798QTY: 12 Delivery: 20 days ADO