Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples

Open
80NSSC27948545QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Shared Services Center is seeking a sole source contract with RPM Innovations, Inc. for Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples. This procurement, categorized under NAICS 332117, is intended for commercial items or services under FAR Part 12. The project will be performed at the NASA Marshall Space Flight Center (MSFC) and involves the fabrication of JBK-75 nozzle manifolds, geometric feature builds, and witness specimens using JBK-75 Fe-Ni and NSA HR-1 Fe-Ni alloys. There is no set-aside used for this procurement. The scope of work requires a build volume of at least 60 inches in diameter by 72 inches, a laser system capable of 1 mm wall thickness, and the use of an inert gas chamber to minimize oxidation. Deliverables include witness coupons in as-built condition and comprehensive build and inspection reports. The period of performance is nine months from the authority to proceed, with the printing phase expected to occur within 75 consecutive days. All deliverables must be shipped to the Marshall Space Flight Center in Huntsville, Alabama.

General Info

NASA sole source contract with RPM Innovations for JBK-75 additive manufacturing services.

NAICS

332117 - Powder Metallurgy Part Manufacturing

Place of Performance

MS, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first3 pages · sow
High

Read the document

Due in 2 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 2 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Full Description

Show more

*PLEASE NOTE* THIS IS NOT A REQUEST FOR QUOTES. ANY PRICE OFFERS RECIEVED WILL NOT BE REVIEWED / ACCEPTED AT THIS TIME. A price quote alone generally does not provide sufficient information to evaluate a vendor's technical capability.


See the attached SOW. 


Posting time has been reduced because of the urgent nature of the procurement. 


SPECIAL NOTICE:


VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT.


NASA/NSSC has a requirement for Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples. 


NASA/NSSC intends to issue a sole source contract to RPM Innovations, Inc., Rapid City, SD 57703-4765, under the authority of FAR 12.102(a). It has been determined that RPM Innovations, Inc. is the sole provider of Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples


NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).


The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial



The NAICS Code for this procurement is 332117.



Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 2:00 p.m. Central Standard Time on 11/20/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.



Oral communications are not acceptable in response to this notice.



NOTE:  Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements.



NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .



Primary Point of Contact:


Monica Wilson


Procurement Assistant III


Sign up to see this detail



Alternate Point of Contact: 


TIFFANY NEAL, SUPERVISORY CONTRACT SPECIALIST, Sign up to see this detail

Similar Contracts

Same NAICS industry code

NAICS: 332117
New
DIBBS
SHIELD, AIRCRAFT GROUND
Solicitation # SPE8EF-27-T-0316
Solicitation SPE8EF-27-T-0316 is a request for the procurement of eight aircraft ground servicing shields (NSN 1730-00-460-0371, P/N 102086-101A) for the Department of Defense, issued by DLA Troop Support Construction and Equipment. This is a Total Small Business Set-Aside under FAR 19.5. The items are source-controlled and must be manufactured and tested according to cited limited rights data. Delivery is required within 135 days after order, with a need ship date of April 12, 2027, and an original required delivery date of June 27, 2027. The contract is FOB Origin and utilizes the First Destination Transportation program for government-arranged shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-1. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances for MIL-STD-105/ASQ Z1.4. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. The contract incorporates critical cybersecurity and safety requirements, including CMMC Level 2 self-assessment, DFARS 252.204-7012 for safeguarding covered defense information, and DFARS 252.204-7018 regarding prohibited telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

4 days ago

DEADLINE

in 8 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334516
New
Federal
ALICE LIFE TEST CRYOCOOLER
Solicitation # 80NSSC27949013Q
The NASA Shared Services Center is seeking to acquire one CryoTel DS30-LT Thermo-Mechanical Unit (TMU) to serve as a dedicated Life Test Unit for the ALICE instrument under the STRIVE Project. This hardware is critical for ground-based, long-duration operational reliability and life qualification testing. The procurement is being conducted as a sole source award to SunPower Inc. under FAR 12.102(a), as the requirement is deemed urgent and compelling to avoid mission failure. The acquisition follows FAR Part 12 procedures for commercial items, utilizing NAICS code 334516. The contractor is responsible for manufacturing and delivering the cryocooler in an orthogonal configuration with fluid loop heat rejection, including an electronics controller, harnesses, balancers, a 4.5-inch Conflat vacuum flange, and necessary sensors. Deliverables also include solid models of the balancer assemblies and the external shell. Performance will occur at the contractor's facility, with final delivery to the NASA Goddard Space Flight Center (GSFC). The period of performance is 16 weeks from award, with an estimated completion date of March 31, 2027. Quality requirements include the provision of a Certificate of Compliance, documentation of all nonconformances, and test results from intermediate and final acceptance tests. To prevent contamination, components must be stored in sealed containers prior to shipment.
Analytical Laboratory Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS