Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Airworthiness Certification and Inspection

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Airworthiness Certification and Inspection is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires an independent entity to perform quality auditing and certification for prime contractors on critical application projects, specifically focusing on the validation of the Certificate of Airworthiness and Conformance for Boeing part number 654T0513-1973. Work is to be performed in New Cumberland, Pennsylvania, and involves the execution of zero-based sampling plans in accordance with MIL-STD-1916. To qualify for this engagement, the contractor must provide FAA-certified inspectors who are capable of delivering signed inspection reports and Airworthiness Certifications. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The contract falls under NAICS code 541380, emphasizing the need for specialized testing and certification services to ensure aviation safety and compliance.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1295.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, ACCESS, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality auditing and certification for prime contractors on DLA Weapons Support ASC critical application projects. Executes zero-based sampling plans per MIL-STD-1916 and validates the Certificate of Airworthiness and Conformance for Boeing P/N 654T0513-1973. Requires FAA-certified inspectors. Delivers signed Airworthiness Certification and inspection reports.

Similar Contracts

Same NAICS industry code

Specialized Testing & Quality Assurance

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

First Article Testing for Aircraft Universal JointsThis subcontract involves performing First Article Testing for aircraft universal joints on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires the validation of one unit against Basic Drawing NR 98897 4C95010, utilizing certified Measuring and Test Equipment in accordance with requirement RT001. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is mandatory. The final deliverables include the tested unit and a comprehensive FAT validation report, both of which must be delivered to Robins AFB in Georgia. This project falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Independent Testing and Inspection for Critical Safety ItemsThis subcontract, titled Independent Testing and Inspection for Critical Safety Items, involves providing independent verification, pressure testing, and quality inspection services for prime contractors on DLA Weapons Support ASC fuel system projects. The scope of work includes conducting sampling according to MIL-STD-1916 or ASQ H1331 and verifying bare item marking per RQ017, utilizing calibrated M&TE in accordance with RT001. The selected provider is responsible for delivering comprehensive inspection reports, pressure test results, and Certificates of Conformance. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the performance of this contract will take place in Jacksonville, Florida. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Magnetic Particle Inspection Services for Aerospace FastenersThis subcontract for Magnetic Particle Inspection Services for Aerospace Fasteners involves performing specialized inspections on sleeve nuts for prime contractors supporting DLA supply contracts. The work must be executed in accordance with ASTM E1444 standards using either portable or wet/dry bench MPI equipment, specifically following the requirements outlined in Drawing Page 3 Frame 2 Note 4. Performance will take place in New Cumberland, Pennsylvania. To ensure quality and compliance, the service provider must operate out of an ISO 9001 or AS9003 certified facility and employ inspectors who hold NAS 410 certification. The primary deliverables for this engagement include the delivery of passed components along with their corresponding certified inspection reports. This opportunity is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Quality Validation & TestingThis subcontract for Aerospace Component Quality Validation and Testing involves performing Production Lot Testing for prime contractors under the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the quality conformance of aerospace rivets by testing random samples against Technical Data Package tolerances. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering essential documentation, including test reports, material and process certifications, and DD Form 1423. The work is to be performed at Tinker AFB and requires the contractor to maintain ISO 9001:2015 and JCP certifications. This opportunity falls under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Non-Destructive Testing (NDT) and CertificationThis subcontract opportunity with the Department of Defense, specifically for the DLA Weapons Support Land Supply Chain, involves providing specialized non-destructive testing (NDT) services. The selected contractor will be responsible for executing inspection protocols to verify the material density and structural integrity of naval control components. All work is to be performed in Mechanicsburg, Pennsylvania, under NAICS code 541380. To be eligible, the contractor must hold RQ040 Non-Destructive Testing Accreditation. The primary deliverables for this engagement include a certified NDT Inspection Report and a formal certification of compliance. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Aerospace Component First Article Testing (FAT)The Aerospace Component First Article Testing subcontract involves performing initial validation testing on three prototype units for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must verify dimensions, material properties, and overall performance in accordance with NASM21134 Revision 2, utilizing calibrated metrology and material testing equipment. Final deliverables include the three tested units and a completed First Article Testing report. Work will be performed at Tinker AFB under NAICS code 541380. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and adhere to MIL-STD-1916 or ASQ H1331 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Quality Assurance and Zero-Based Sampling InspectionThis subcontract opportunity with the DLA Weapons Support ASC Commodities Division involves providing independent quality assurance and zero-based sampling inspection for aerospace projects. The selected contractor will be responsible for implementing inspection and testing protocols in accordance with MIL-STD-1916 and the DLA Master List of Technical and Quality Requirements, utilizing precision measurement equipment to meet Boeing tolerances. Key deliverables include the submission of detailed inspection reports and certifications of compliance. Performance will take place at Tinker AFB, and the contract requires strict adherence to quality and security standards, specifically ISO 9001 or SAE AS9003 certification and CMMC Level 2 compliance. Interested parties must respond by October 23, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Dimensional Conformance and Thread Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the warehouse and storage areas, totaling approximately 3,600 square feet. All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 541380. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding equal opportunity, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 7 hours ago

DEADLINE

Electrical Overload and Load Bank TestingThis subcontract opportunity involves performing electrical overload and load bank testing for prime contractors working on Clayton County Water Authority facility projects. The scope of work includes conducting primary and secondary current injection testing and load bank testing to verify protective relay trip curves and timing. The selected provider must deliver detailed overload test reports and trip timing data to ensure system reliability. Qualified candidates must employ NETA certified technicians or Professional Engineers to execute the technical requirements. Interested parties should note that the response deadline is November 12, 2026, and the project falls under NAICS code 541380.

Clayton County Water Authority

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Dial Indicating Pressure GagesThis subcontract involves the procurement or manufacture of 82 specialized dial indicating pressure gages for prime contractors supporting DLA supply contracts. The required units must adhere to Thuemling Industrial Products Inc part number 4306148 and NSN 6685-01-506-1061. All items must be delivered FOB Origin to DLA Distribution facilities, with performance taking place in Barstow, California. Strict compliance with technical standards is required, including packaging and marking per MIL-STD-129, RP001, and ASTM D3951. Quality acceptance will be governed by MIL-STD-1916 or ASQ H1331. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline of October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for aerospace components destined for the DLA Weapons Support ASC. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. To ensure the survival of components during transit, the contractor must utilize approved MIL-SPEC cushioning and preservative materials. The project specifically entails the packaging and palletization of three units for delivery to Tinker AFB. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Aircraft Lens Fabrication (NSN 6220014741863)

Aircraft Manufacturing

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging components according to ASTM D3951 and RP001 DLA standards, with all marking and labeling performed in compliance with MIL-STD-129. Additionally, the contractor is responsible for coordinating FOB Origin shipping for critical aviation components to ensure they are shipment-ready for DLA Distribution. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project is categorized under NAICS code 488510. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Seal Sleeves (NSN 1615002008060)This subcontract involves the manufacture and supply of 29 precision-manufactured seal sleeves for prime contractors supporting DLA supply contracts. The parts must be produced according to Bell Textron P/N 204-012-107-001 and NSN 1615002008060 specifications, with quality assurance conducted under MIL-STD-1916 or ASQ H331 Zero-based sampling. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336411 for the Department of Defense. The contractor is required to maintain CMMC Level 2 self-assessment and possess the necessary capabilities for handling Controlled Unclassified Information. The procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 23, 2026.

Aircraft Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Air Regulator Boots (NSN 5342006010748)This subcontract involves the manufacture or procurement of 42 air regulator boots, specifically Honeywell part number 110662-1 (NSN 5342006010748), for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The items must be delivered FOB Origin to Cherry Point and must strictly adhere to the Buy American Act and Berry Amendment. The contractor is required to maintain ISO 9001:2015 certification and ensure compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging meeting ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Electrical Insulation Sleeving (NSN 5970-01-279-1761)This subcontract involves the manufacture or procurement of 243 units of electrical insulation sleeving under NSN 5970-01-279-1761 for prime contractors supporting the DLA Weapons Support ASC. The selected provider must ensure all items meet strict quality control standards per SAE AS9003 or ISO 9001 and adhere to MIL-STD-129 and ASTM D3951 packaging requirements. Final delivery of the marked and packaged materials is to be made to Tinker AFB. Compliance is a critical component of this agreement, requiring the contractor to maintain CMMC Level 2 certification via a C3PAO, as well as full adherence to ITAR and EAR regulations. The opportunity is categorized under NAICS code 335999 and is managed by the Department of Defense. Interested parties must submit their responses by October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract opportunity is for the provision of specialized packaging and shipping services to support prime contractors on DLA Weapons Support ASC projects. The scope of work involves the packaging of transducers in accordance with ASTM D3951, marking and labeling per MIL-STD-129, and palletization following RP001 DLA Packaging Requirements. The contractor must utilize MIL-SPEC materials and industrial equipment to ensure all items are ready for transit and delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 488510. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Motional Pickup Transducer SupplierThis subcontract opportunity is for the supply of nine specialized motional pickup transducers, specifically Part Number ITQ-R36-1000-200SG and NSN 6695-01-536-8294, to support prime contractors on DLA Weapons Support ASC projects. The manufacturer must adhere to the DLA Master List of Technical and Quality Requirements and possess high-precision fabrication equipment to ensure technical compliance. The contract is a total small business set-aside under NAICS code 334517 and requires strict adherence to the Buy American, Balance of Payments, and Berry Amendment restrictions. Additionally, the successful bidder must provide a CMMC Level 2 self-assessment. Performance will take place in New Cumberland, Pennsylvania, with responses due by October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS