Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Third-Party Cable Testing and Certification Services

Active

State & Local

Response Deadline08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Lincoln Electric System is seeking a qualified third-party vendor to perform independent high-voltage and moisture resistance testing on medium voltage cables, ensuring compliance with its specified technical and safety standards. The contractor must conduct rigorous testing procedures and deliver formal, documented pass or fail certification reports that meet all requirements established by LES. This subcontract engagement is focused solely on testing and certification services, requiring technical expertise in electrical cable validation under controlled environmental and electrical conditions. The solicitation is open for responses until August 6, 2026, and is classified under NAICS code 541380, indicating it falls within the scope of professional, scientific, and technical services related to engineering and testing. All work must be performed in accordance with LES protocols, and successful bidders will be expected to adhere strictly to quality control, documentation integrity, and timely reporting obligations.

General Info

Lincoln Electric System seeks vendor for high-voltage cable testing and certified reporting per its safety standards.

Agency

Nebraska → Lincoln Electric SystemView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NE, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNebraska → Lincoln Electric System

ContactsNo contacts available

OfficeN/A

Organization / Agency

Nebraska → Lincoln Electric System

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform independent high-voltage and moisture resistance testing on MV cables and issue formal pass/fail certification reports per LES requirements.

Similar Contracts

Same NAICS industry code

South Concourse Renovation and Enabling Project Testing and Special InspectionsThe Port of Seattle is procuring Testing and Special Inspection Services for the South Concourse Renovation and Enabling Project at Seattle-Tacoma International Airport, aimed at extending the useful life of the South Satellite (SSAT) and bringing it into compliance with current building, seismic, and structural codes. The project encompasses comprehensive upgrades to civil utilities, passenger spaces, and building systems across four phased quadrants, beginning with early work packages such as temporary loading docks and holding areas. The contractor will perform material testing, inspections, and investigative services for concrete, welding, structural steel, masonry, asphalt, anchor bolts, fireproofing, grout, and life safety anchorage, with work conducted both onsite and at offsite laboratories and fabrication facilities. Quality control is mandated through the employment of a dedicated QC Manager who audits personnel and equipment to ensure adherence to industry standards, and all testing results and inspection reports must be delivered within strict timelines—ranging from 24–48 hours for rush requests to 14 days for final reports. The contract will be issued as a single project-specific agreement with an initial three-year performance period and potential for up to five additional optional years, with work authorized through Service Directives that specify either firm fixed price or time-and-materials compensation, subject to a not-to-exceed total price. Proposals are evaluated based on project approach, interview performance, and specialized technical competence, with price considered as part of best value rather than the sole determinant. All personnel must obtain authorized airport access badges per Title 49 CFR Parts 1540/1542, including fingerprinting and security threat assessments. The consultant must comply with Port of Seattle ethics standards, including conflict of interest disclosures, non-discrimination policies tied to U.S. DOT and FAA regulations, and Washington State workers’ compensation laws. Business certifications for WMBE, SBE, VOB, and LGBTQBE are recognized, and proposers must hold an active UBI and LNI certification. Proposals must be submitted electronically via email by August 14, 2026, in PDF and Excel formats adhering to strict naming, size, and formatting guidelines, with a maximum of eight content pages excluding exhibits, resumes, and cover materials. Security, environmental compliance, anti-human trafficking measures, and restrictions on Russian Federation entities are mandatory, and all deliverables must align with the Port's Values and Standards.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQA five-year indefinite-delivery/indefinite-quantity contract has been issued by the Port of Seattle’s Aviation Facilities and Infrastructure division to secure consulting services for retro-commissioning, test-adjust-balance, and controls assistance across key airport systems including HVAC, plumbing, and lighting. The goal is to identify and correct operational deficiencies, improve system performance and occupant comfort, extend equipment lifespan, and ensure compliance with safety and regulatory standards. Work will be executed through service directives managed in close coordination with AV/F&I, with the consultant providing both initial assessments and ongoing support to maintain optimal system function. The contract falls under NAICS code 541380 and is administered by the Port of Seattle, with primary point of contact Jason Gates and project manager Jim Farris available for coordination.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Hazardous Material Labeling and Safety Data ComplianceThe contract requires strict adherence to the OSHA Hazard Communication Standard for all hazardous materials included in the shipment, mandating accurate labeling and complete Safety Data Sheet documentation to ensure worker and transport safety. Compliance is non-negotiable and must be maintained from handling through delivery, with emphasis on clarity, currency, and accessibility of all required safety information. This subcontract, issued under NAICS code 541380 by the Department of Defense’s DLA Dist San Joaquin, is performance-based with a place of performance in Tracy, California, zip code 95304-5000. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. Interested parties must demonstrate capability to meet federal hazard communication requirements without deviation, ensuring all materials are properly identified and documented per OSHA guidelines throughout the supply chain.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

Specialized Packaging and Preservation ServicesThe contract pertains to the design and execution of specialized packaging and preservation methods for electric motors in accordance with military specifications, ensuring the components maintain structural and functional integrity during transport and long-term storage under demanding environmental conditions. The work requires adherence to rigorous defense standards for material selection, sealing techniques, corrosion inhibition, shock and vibration protection, and environmental monitoring protocols to meet operational readiness requirements. All packaging systems must be validated for compatibility with military logistics chains and capable of withstanding extreme temperature, humidity, and exposure scenarios without degradation. The solicitation is issued as a subcontract under the NAICS code 541380, which classifies it within engineering services, and is managed by the Maritime Supply Chain division of the Department of Defense. Offers must be submitted by the response deadline of August 6, 2026, with no set-aside provisions identified for small businesses or other categories. Performance location details are unspecified, but the work is tied to defense logistics and supply chain operations. Interested parties should access the official solicitation via the provided DIBBS link for technical requirements, compliance documentation, and submission instructions.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Quality Compliance and Safety ReportingThe contract requires adherence to strict quality compliance standards and ongoing monitoring for safety issues, with all findings and actions documented and reported in full accordance with DFARS and FAR regulations. Recordkeeping is mandatory and must be maintained for potential government inspection, ensuring full transparency and accountability throughout the performance period. The work is tied to a subcontract under the Medical Supply Chain MD Surg FSF, with performance centered at Fort Campbell, Tennessee, 42223-5000, and falls under NAICS code 541380 for other scientific and technical consulting services. Bids must be submitted by July 28, 2026, following the solicitation posted on July 22, 2026, and all submissions must comply with the Federal Acquisition Regulation framework to qualify for consideration.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThis contract entails comprehensive quality assurance and inspection services requiring strict adherence to MIL-STD-1916 or ASQ H1331 standards for both in-process and final inspections, with a mandatory zero non-conformance requirement for all delivered items. Successful performance demands rigorous quality control throughout production to ensure absolute compliance, coupled with timely reporting via the Web-based Automated Workflow (WAWF) system to maintain transparency and traceability. The solicitation is a subcontract under a Total Small Business Set-Aside designation, specifically reserved for small businesses as defined by SBA regulations under NAICS code 541380, which covers other scientific and technical consulting services. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the procurement is managed by the Department of Defense through its Land Supply Chain office. Interested parties must submit responses by the deadline of August 3, 2026, with the solicitation originally posted on July 22, 2026, and the full details accessible through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Radioactive Materials Notification ServicesThe contract requires the detection and notification of radioactive materials in shipments using instrumentation that is NIST-traceable and adheres to Department of Defense reporting standards. The work involves monitoring cargo and transport networks to identify unauthorized or unexpected radioactive substances, ensuring timely alerts are sent to government entities in compliance with federal security protocols. All equipment and procedures must meet rigorous accuracy and calibration benchmarks to guarantee reliable detection and minimize false positives or negatives. The contract is structured as a subcontract under NAICS code 541380 and is associated with the Department of Defense’s LSO Combat Vehicles and Armament division. Performance is to occur in Tampa, Florida, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. Contractors are expected to have proven experience in radiation detection systems, government-compliant reporting frameworks, and the ability to integrate with DoD supply chain surveillance operations. Failure to meet detection thresholds or reporting timelines may result in contract non-compliance or termination.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires the execution of radiation testing on the SHA Reamer to determine the presence of radioactive materials, with a specific threshold of 0.002 microcuries per gram triggering mandatory notification. If testing reveals levels exceeding this limit, advance warning must be provided to the contracting authority prior to any further handling or movement of the equipment. The work is governed under a subcontract classification with a NAICS code indicating specialized scientific and technical consulting services, and the performance location is designated as New Cumberland, Pennsylvania with a zip code of 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the Department of Defense through its DDSP New Cumberland Facility serving as the contracting organization.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Labeling & ComplianceThe contract requires compliance with MIL-STD-129 standards for labeling hazardous materials, specifically packaged cylinders, ensuring all required hazard communication elements are clearly applied. This includes accurate barcoding for inventory and logistics tracking, as well as the timely submission of Material Safety Data Sheets to support regulatory and safety requirements. All labeling must align with Department of Defense protocols for identification, handling, and transport of dangerous goods. The work is to be performed at the specified location in Tracy, California, with a zip code of 95304-5000, under a subcontract arrangement categorized under NAICS code 541380. The solicitation was posted on July 22, 2026, with a firm deadline for responses on August 3, 2026, and is managed by the DLA Dist San Joaquin under the Department of Defense.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

First Article and Production Lot Testing CoordinationThe contract involves the preparation, packaging, and coordination of first article testing and production lot testing in accordance with MIL-STD-2073-1E and ANSI/ASQC Z1.4 sampling standards, ensuring compliance with stringent military and quality control requirements. This subcontract requires the successful bidder to manage the full lifecycle of testing documentation and procedures, from initial article validation through ongoing production verification, with adherence to standardized sampling protocols to guarantee product reliability and consistency. The work is tied directly to Department of Defense supply chain operations under the agency name C AND T SUPPLY CHAIN, with performance expected to meet defense quality benchmarks without exception. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, leaving a seven-day window for submissions. The North American Industry Classification System code 541380 indicates this falls under other scientific and technical consulting services, reflecting the specialized nature of the testing coordination rather than direct manufacturing. The place of performance and point of contact details are not specified, suggesting the work may be performed remotely or at multiple locations designated by the contracting activity. The contract is accessible through the DIBBS platform, and bidders must ensure full alignment with both military packaging standards and statistical quality sampling practices to qualify for award.

C AND T SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires strict adherence to hazardous materials compliance standards, specifically focusing on accurate labeling and the preparation of Safety Data Sheets in alignment with OSHA’s Hazard Communication Standard and MIL-STD-129. All activities must ensure that hazardous substances are properly identified, documented, and handled according to federal and military regulations to maintain safety and regulatory integrity. The work is expected to support defense operations through precise labeling procedures and compliance-driven documentation practices. The subcontract is issued under NAICS code 541380 and is associated with the Department of Defense, specifically under the organization Construction & Equipment Manu & Con. Performance is mandated to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 22, 2026, and responses must be submitted no later than August 3, 2026. Contractors must be prepared to meet all technical and regulatory requirements without deviation to qualify for award, and all work must be executed in full compliance with applicable federal and military standards.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Radioactive Material Notification & Labeling (If Applicable)The contract requires the identification, documentation, and proper labeling of any components that contain radioactive materials exceeding established regulatory thresholds, in full compliance with MIL-STD-129 and Department of Defense standards. This effort is critical to ensuring safe handling, transportation, and storage of regulated materials across the defense supply chain, with strict adherence to labeling protocols to prevent accidental exposure or mishandling. All work must be conducted with precision and thorough documentation to meet federal compliance requirements and maintain operational readiness. This subcontract opportunity, posted by the Maritime Supply Chain under the Department of Defense, is open for response until August 6, 2026, with a NAICS code of 541380 indicating professional, scientific, and technical services. The performance location and point of contact details are unspecified, but the work is expected to support DoD logistics and material control systems. Contractors must be prepared to demonstrate expertise in regulatory compliance, radiological safety, and military labeling standards to qualify for award.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Nebraska → Lincoln Electric System

Same awarding agency

Supply of 35-Foot 5U TA12 Round PolesLincoln Electric System is seeking the supply of two 35-foot galvanized steel poles with a 12.0-inch top circumference, designated as 5U TA12, featuring a round profile and including all required mounting components. These poles must comply with LES and TAPP standards or their equivalent, ensuring suitability for utility infrastructure applications. The solicitation is structured as a subcontract opportunity with a response deadline of July 28, 2026, at 7:00 PM, and was posted on July 21, 2026. The North American Industry Classification System code is 332311, indicating the contract falls under the manufacture of other structural metal products. The place of performance and specific office address details are not provided, but the procurement is managed through the Lincoln Electric System in Nebraska, and all bids must be submitted via the online portal linked in the contract data.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Supply of 40-Foot 3U MA6 Round PolesThe contract calls for the supply of two 40-foot galvanized steel poles conforming to the 3U MA6 designation, each with a round shape and a 12.5-inch top circumference. Each pole must include an integrated handhole, a bracket arm, and a cap, and must meet or exceed the technical requirements outlined in RTS-39-9011-AB-T2-GV or an approved equivalent. The poles are intended for use in electrical infrastructure applications and must be manufactured to ensure durability and compliance with industry standards for outdoor environmental exposure. The solicitation is categorized as a subcontract with a response deadline of July 28, 2026, at 7:00 PM, and was posted on July 21, 2026. The contracting organization is Lincoln Electric System based in Nebraska, operating under NAICS code 332311 for metal structure manufacturing. All deliveries and performance are expected to align with the agency’s specifications, although no specific delivery location or point of contact is provided in the available data. Bidders must ensure full compliance with the stated technical requirements to qualify for award.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Supply of 50-Foot Galvanized Steel Street Light Poles (PTT4 RND)Eight 50-foot galvanized steel street light poles with a round shape and a 13.5-inch top circumference are required under this subcontract, each designated as PTT4 and including all necessary structural components to ensure full functionality and safety. The poles must comply with the technical specifications and delivery standards set by Lincoln Electric System, ensuring durability, structural integrity, and proper installation readiness. The solicitation was posted on July 21, 2026, with submissions due by July 28, 2026, at 7:00 PM, and the work is governed under NAICS code 332311 for fabricated metal product manufacturing. Performance is expected to be carried out under the jurisdiction of Nebraska, with no specific city or address designated, and the contract is open to qualified subcontractors meeting all LES requirements without set-aside restrictions.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Supply of 40-Foot Galvanized Steel Street Light Poles (PTT4 RND)Lincoln Electric System is soliciting a subcontract for the supply of six 40-foot galvanized steel street light poles with a round profile and a 12.5-inch top circumference, designated as PTT4. Each pole must include all required fittings such as an anchor base, handhole, bracket arm, and metal cap, and must fully comply with LES specifications and applicable industry standards. The poles are intended for deployment in Nebraska and must meet stringent quality and durability requirements to ensure long-term performance under outdoor conditions. The solicitation was posted on July 21, 2026, with a response deadline of July 28, 2026, at 7:00 PM. The North American Industry Classification System code for this procurement is 332311, indicating it falls under the fabricated metal product manufacturing category. All bids must be submitted through the designated online portal.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

INF - Purchase Street Light PolesLincoln Electric System is soliciting bids for the purchase of street light poles under solicitation number 090-26, with bids due by 2:00 PM CST on July 28, 2026. The bid process is informal and follows a two-step unsealing procedure, with clarification questions required to be submitted through the official bid portal by 4:00 PM CST on July 24, 2026. Bids must be submitted FOB Lincoln, Nebraska, and all poles are to be delivered to 2620 Farfield Street, Lincoln, NE 68521, with payments directed to Accounts Payable at 9445 Rokeby Road, Lincoln, NE 68526. All inquiries must be routed exclusively through the portal’s Clarifications tab, and the contract is open for bidding with no mandatory pre-bid event. The solicitation is issued in USD and managed by the LES Procurement Department, targeting suppliers capable of furnishing and delivering compliant street light poles to meet operational needs.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Reel Packaging and Logistics ServicesThe contract requires provision of comprehensive reel packaging and logistics services including reel supply or fabrication, cable spooling, end sealing, and moisture protection to ensure product integrity prior to delivery. All work must comply with FOB standards and be delivered to job sites in Lincoln, Nebraska, with strict adherence to handling and protection protocols to prevent damage or degradation of cable materials. The scope encompasses end-to-end preparation and transportation coordination tailored to the specific needs of the Lincoln Electric System’s infrastructure projects. The solicitation is classified as a subcontract under NAICS code 484220, relating to truck transportation and logistics services, and is open for responses until August 6, 2026. The contract is administered by Lincoln Electric System in Nebraska with no set-aside provisions specified. Interested parties must submit proposals through the designated online portal by the stated deadline, and all delivered goods must meet the required technical and logistical specifications to qualify for acceptance and payment.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Medium-Voltage Cable Manufacturing (750 kcmil, 4/0, 3/0, 1/0 AWG)Lincoln Electric System in Nebraska is seeking subcontractors to manufacture and deliver medium-voltage cables in four specified sizes: 750 kcmil, 4/0 AWG, 3/0 AWG, and 1/0 AWG. Each cable must feature concentric neutral construction and TRXLPE insulation, meeting all technical requirements outlined in LES specifications. The cables are to be packaged on reels as mandated, ensuring proper handling, transport, and installation readiness. The solicitation was posted on July 21, 2026, with responses due by August 6, 2026, at 7:00 PM. This contract falls under NAICS code 335931, classifying it under other electrical equipment and component manufacturing. The procurement is structured as a subcontract and does not specify any set-aside designation or demographic preferences. All work must be performed in accordance with LES standards, and while the place of performance and point of contact details are not provided, bidders are directed to the online portal for full documentation and submission.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Medium-Voltage Aluminum Cable Manufacturing (1000 kcmil)The contract requires the manufacture, testing, and delivery of 52,000 feet of medium-voltage aluminum conductor cable rated at 1000 kcmil with a 15 kV capacity, featuring TRXLPE insulation, a concentric neutral, and an LLDPE jacket, all constructed in full compliance with ICEA and AEIC industry standards. The cable must meet rigorous performance and safety specifications to ensure reliability in utility applications, with all production and testing procedures subject to strict quality controls. The full quantity must be completed and shipped according to schedule to fulfill the delivery obligations outlined in the agreement. The solicitation, issued under the NAICS code 335931 for Other Electrical Equipment and Component Manufacturing, is a subcontract opportunity posted by Lincoln Electric System in Nebraska. Responses are due by August 6, 2026, and all work must comply with the technical and regulatory requirements specified. While the exact delivery location and point of contact are not detailed in the provided data, performance is expected to align with the agency’s infrastructure needs. Bidders must demonstrate the capability to produce the specified cable type and provide evidence of adherence to recognized industry codes throughout the manufacturing and testing phases.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Purchase Medium Voltage CableLincoln Electric System is soliciting bids for the purchase of medium voltage cable under solicitation number 089-26, with the bid open for submission until August 6, 2026 at 2:00 PM CST. The solicitation follows a two-step unsealing process and requires vendors to submit formal, compliant proposals detailing the furnishing and delivery of cable in accordance with LES specifications, with delivery terms set as FOB Lincoln, Nebraska. All questions must be submitted through the official bid portal under the Clarifications tab, with the deadline for clarifications set for July 29, 2026 at 4:00 PM CST. The bid documents are available as of July 21, 2026, and the successful bidder must return a completed Equal Employment Opportunity Compliance Request Form. The bill-to address is Accounts Payable at 9445 Rokeby Road, Lincoln, NE, while the ship-to location is the job site in Lincoln, Nebraska. This is a formal procurement process managed by the LES Procurement Department, and participants must register and interact through the designated portal to access full details and submit responses.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Environmental Compliance and Documentation ServicesLincoln Electric System is seeking a subcontractor to provide environmental audit packages, end-use certifications, and compliance documentation to ensure the safe handling and disposal of scrap transformers. The services required are focused on verifying adherence to environmental regulations throughout the lifecycle of transformer decommissioning, with an emphasis on proper documentation to confirm that hazardous materials are managed, transported, and disposed of in accordance with applicable laws. The contract falls under NAICS code 541620, indicating environmental consulting services, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on July 17, 2026, and responses are due by July 28, 2026, at 7:00 PM. Performance location details are not specified, and there is no designated point of contact provided in the documentation. The bid can be accessed via a web link associated with the Lincoln Electric System’s procurement portal in Nebraska.

Environmental Consulting Services

POSTED

DEADLINE

Transportation and Hauling of Heavy Electrical EquipmentLincoln Electric System is seeking a subcontractor to transport heavy electrical transformers from its facilities to designated recycling or storage locations using specialized flatbed trucks, rigging, and lift equipment. The work involves the safe handling and movement of bulky, high-weight transformer units requiring precise planning, qualified personnel, and appropriate industrial-grade machinery to ensure compliance with safety and operational standards. The solicitation is open for responses until July 28, 2026, at 7:00 PM, and is classified under NAICS code 484220 for specialized freight trucking. The performance location is in Nebraska, though exact city or address details are not specified in the posting. Bidders must possess the necessary equipment, expertise, and experience to handle this type of heavy haul logistics without disruption or damage to the equipment or surrounding infrastructure.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Scrap Transformer Recycling and Disposal ServicesLincoln Electric System is seeking a subcontractor to provide full-service pickup, transportation, and environmentally compliant recycling or disposal of PCB-free scrap transformers. The contractor is responsible for handling all logistics from collection through final disposition, ensuring adherence to environmental regulations and proper documentation of end-use outcomes such as metal recovery or refurbishment. The services must be executed in a manner that guarantees safe, lawful, and traceable processing of all materials. The solicitation is open for responses until July 28, 2026, and is classified under NAICS code 562920 for other remediation services. Performance is expected to occur within Nebraska, though specific locations are not detailed. Interested parties must submit proposals through the designated online portal by the stated deadline.

Materials Recovery Facilities

POSTED

DEADLINE