Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Assurance and Inspection Services

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires third-party quality assurance and inspection services to independently verify the conformance of manufactured parts against MIL-STD-1916 sampling plans and the specific requirements outlined in RQ017. This includes rigorous testing of critical attributes at an Acceptable Quality Level of 0.1, ensuring that even minimal defects are detected and documented. All instances of nonconformance must be formally reported with full traceability and documentation to support compliance and corrective actions. The work is scoped under a subcontract arrangement for the Department of Defense, specifically for the DLA Fleet Readiness Center DLA PSC, with performance expected at Cherry Point, North Carolina, ZIP 28533-0021. Interested parties must submit responses by August 11, 2026, following the solicitation issued under the NAICS code 541330 for engineering services.

General Info

Third-party QA to inspect parts against MIL-STD-1916 at AQL 0.1 for DoD at Cherry Point, NC, by August 11, 2026.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent quality verification of manufactured parts per MIL-STD-1916 sampling plans and RQ017 requirements, including AQL 0.1 critical attribute testing and nonconformance reporting.

Similar Contracts

Same NAICS industry code

Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Refrigeration System Inspection and CommissioningThe contract pertains to the post-installation inspection and commissioning of new refrigeration doors to ensure temperature integrity, system performance, and seamless integration into existing refrigeration infrastructure. The work requires verification that the installed doors maintain optimal thermal efficiency, operate without leaks or malfunctions, and are properly synchronized with controls and monitoring systems. All tasks must align with industry standards for cold chain reliability and safety, with documentation provided to confirm compliance and operational readiness. This is a subcontract under a Small Business Set-Aside, open exclusively to SBA-certified entities including Small Businesses, Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code 541330 indicates technical consulting services related to engineering and scientific evaluation. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is unspecified, though the point of contact and agency location are tied to Management & Training Corporation. Submission must occur through the designated SBA opportunity portal.

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is inviting qualified firms including Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises to submit qualifications for participation in the Corydon Well Replacement Design Project in Riverside County, California, on behalf of the Elsinore Valley Municipal Water District. The scope of work encompasses a broad range of professional services such as engineering, environmental assessment, surveying, geotechnical analysis, permitting, public outreach, and utility location, with applicable NAICS codes covering architecture and engineering, construction, and related consulting activities. The solicitation is targeted toward small and disadvantaged businesses under SBA set-aside categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with additional alignment to DBE requirements under the Department of Transportation guidelines. Interested firms must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation materials and submit their qualifications, with all submissions due no later than 5 p.m. PST on August 14, 2026, and the final proposal deadline set for September 15, 2026.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract is a solicitation for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, operated by Management & Training Corporation (MTC). The work requires a Professional Engineer with a valid license to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size drawing set. All deliverables must meet MTC’s specifications and be of merchantable quality, free from defects, and constructed with good workmanship. The contract is a fee-for-service subcontracting opportunity under NAICS Code 541330 for engineering services, with a size standard of $9 million in annual revenue. It is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, and all subcontractors must self-certify their eligibility under FAR 52.219-8 and obtain a Unique Entity Identifier and Taxpayer Identification Number. The solicitation requires submission via email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and mandates inclusion of a completed bid sheet, W-9, Self-Certification Form, and Acceptance of Terms & Conditions. Invoices must reference the purchase order number, service dates, itemized pricing with extended unit costs and totals, and include an invoice number and date, and payment is contingent upon delivery and acceptance of services. The contractor is obligated to indemnify MTC for all liabilities arising from performance, negligence, or contract breach, and must comply with labor standards including the Federal Contractor Minimum Wage and Wage Determination SCA WD 2015-5577 Rev. 28. Contractors and subcontractors must adhere to federal data protection requirements, including encryption and one-hour reporting of any privacy breaches involving personally identifiable information, and are prohibited from retaining or disseminating data covered under the Privacy Act or FOIA exemptions. The contract is subject to FFATA reporting if the value exceeds $40,000, and first-tier subcontractors over $30,000 must disclose debarment status. Insurance is not required, but MTC retains inspection rights at all reasonable times, and the contract may be terminated with 30 days' written notice or immediately if government funding

Tongue Point Job Corps

POSTED

about 11 hours ago

DEADLINE

in about 21 hours

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, and line-bid items for drilling and abandonment, including full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board standards; Phase 2 covers detailed design of architectural, structural, mechanical, electrical, and instrumentation systems for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at 30% design completeness, review of up to 200 shop drawings and material submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. The design must adhere to AWWA standards for a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump applications, and tie discharge piping into the Corydon Blend station and Malaga blending location. The contract is set aside for small businesses including SB, SDB, WOSB, VOSB, SDVOSB, and DBE entities under SBA programs, and requires full compliance with Buy America and Build America Buy America Act provisions, including domestic content certifications and waiver procedures for non-compliant materials. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a total estimated project cost of $2,260,788, though the final professional services fee is subject to negotiation. Evaluation is weighted with 25% each for relevant qualifications and understanding of the project, 20% for schedule and scope clarity, 10% for innovation, 10% for cost value, and 10% for overall proposal quality, with award based on demonstrated competence rather than lowest price. Required submissions include certifications for debarment, lobbying, American Iron and Steel compliance, Executive Order N-6-22, conflict of interest, insurance, public works registration, and detailed DBE subconsultant information. All proposals must be submitted via EVMWD’s PlanetBids portal by 10:00 a.m.

Ardurra Group, Inc.

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and ongoing engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The solicitation, designated as C2305, requires a qualified firm to provide comprehensive engineering expertise spanning the full project lifecycle—from initial planning and design through bid evaluation and field support during construction. The work is classified under NAICS code 541330 and is set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, prioritizing participation by certified DBEs. The contract opportunity was posted on August 4, 2026, with responses due by September 1, 2026, and is being administered by AKM Consulting Engineers, with Katie Neubauer serving as the primary point of contact for inquiries. The project aims to enhance local water system reliability through the replacement of the Corydon Well, ensuring compliance with regulatory standards and efficient delivery of services to the community.

AKM Consulting Engineers

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District property in California. The scope encompasses comprehensive engineering services across two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards, civil and mechanical site planning, wellhead and facility design, bidding assistance, and full-time construction management with hydrogeological oversight during drilling; Phase 2 covers detailed architectural, structural, electrical, mechanical, and instrumentation and controls design for well equipping, testing, and commissioning, along with continued engineering support during construction. All work must comply with Riverside County and California State Water Resources Control Board regulations, including proper casing depth, sanitary seal placement, and abandonment protocols. The project is subject to the Buy America Act and Build America, Buy America requirements, mandating domestic sourcing of iron, steel, and manufactured products, with certification and documentation requirements enforced through subcontracts exceeding $150,000. The project is funded partially by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, necessitating full compliance with 2 CFR Part 200, including audit rights, debarment and suspension checks, and lobbying restrictions. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, capped at a not-to-exceed amount of $1,000,000. Evaluation prioritizes demonstrated qualifications and experience in municipal groundwater projects, technical understanding of the scope, realistic scheduling, innovation, and overall proposal quality, with cost being a secondary consideration. All respondents must provide certifications for non-collusion, American Iron and Steel compliance, debarment/suspension status via SAM, DBE participation, public works registration, insurance acknowledgment, and Executive Order N-6-22 compliance, along with resumes of key personnel and proof of California professional licensure. Work is scheduled to begin in November 2026 and conclude by May 2028, with monthly invoicing and progress reporting required, subject to 45-day payment terms. Subconsultants must be certified and disclosed, and the project emphasizes outreach to small, disadvantaged, women-owned, and minority-owned businesses. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and include all mandatory attachments and forms

GEI Consultants, Inc.

POSTED

about 11 hours ago

DEADLINE

On-Call Pavement Preservation Engineering Services

Solicitation # 26085

The City of Bellevue Transportation Department is seeking qualified consulting firms to provide on-call engineering services focused on pavement preservation, covering civil engineering, geotechnical engineering, and survey/geomatics support. This solicitation, numbered 26085, is open for responses until August 25, 2026, with proposals due by 9:00 PM Pacific Time. The services will be performed within the state of Washington and are intended to support the City's infrastructure maintenance and improvement efforts. Interested firms must demonstrate expertise in pavement analysis, design, and related fields to be considered for inclusion on the on-call list. The primary point of contact for inquiries is Kelli Hoel, reachable via email at khoel@bellevuewa.gov or by phone at (425) 452-4378. The solicitation is posted on the City’s public procurement portal and is open to all eligible firms without specific set-aside provisions.

City of Bellevue

POSTED

about 11 hours ago

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified vendors to provide mechanical, electrical, and plumbing engineering services for school facilities, with a focus on designing HVAC, electrical, plumbing, fire alarm, and data systems that prioritize energy efficiency and full compliance with applicable building and safety codes. The scope requires integrated system design that supports sustainable operations and long-term operational reliability across multiple school sites under the jurisdiction of the Baldwin County Board of Education, though the specific locations are not detailed in the available data. All work must align with industry standards and be delivered in coordination with broader capital improvement efforts for public education infrastructure. The solicitation, categorized as a subcontract under NAICS code 541330 for architectural and engineering services, was posted on August 4, 2026, with a response deadline of September 4, 2026. The contracting authority is identified as the Baldwin County Board of Education operating under the state of Georgia, though exact office or performance address details are not provided. The contract is not subject to a specific set-aside classification, and interested parties must submit proposals through the official state procurement portal linked in the posting. Proposals must demonstrate technical expertise, past experience in educational facility design, and a clear plan for ensuring code adherence and energy performance targets.

Baldwin County Board of Education

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Civil Engineering Design for School FacilitiesBaldwin County Board of Education is seeking civil engineering services under a subcontract for the design and implementation of infrastructure related to public school facilities. The scope of work includes site grading, stormwater management, drainage systems, utility layout, and ensuring full compliance with applicable codes and regulations. Services must be delivered to meet the technical and regulatory standards required for educational facilities, with all work performed in accordance with recognized civil engineering practices. The solicitation was posted on August 4, 2026, and responses are due by September 4, 2026. The contract falls under NAICS code 541330, classifying it as architectural and engineering services. The place of performance and agency office location are not specified in the provided data, but the work is intended for school projects within the jurisdiction of the Baldwin County Board of Education in Georgia. All proposals must be submitted by the deadline to be considered for award.

Baldwin County Board of Education

POSTED

about 12 hours ago

DEADLINE

in about 1 month

26RFSQ69 Engineering Development Services

Solicitation # 26RFSQ69

Williamson County is seeking qualified engineering firms to provide specialized support for the review of third-party developer submissions and quality assurance activities related to plat and driveway permits, FEMA Flood Plain Program administration, and drainage and hydrologic/hydraulic engineering analyses. This engagement is specifically limited to evaluating designs created by external developers and does not encompass original infrastructure design work such as roadway or drainage conveyance design for county projects. The work will support multiple county divisions including Road and Bridge, Development Services & Drainage, and County Facilities, particularly in connection with projects funded through the County’s Road Bond Program. The County anticipates selecting approximately three firms but reserves the right to choose more or fewer based on evaluative criteria and operational needs. Firms interested in this opportunity must submit qualifications in response to solicitation number 26RFSQ69, with proposals due by August 18, 2026. The solicitation was posted on August 4, 2026, and all submissions must be directed to Williamson County in Georgetown, Texas. Primary points of contact for inquiries are Sandra Malcolm and Joy Simonton, with Kerstin Hancock available as a secondary contact. This contract does not involve direct construction or county-led engineering design and is strictly focused on third-party design review and compliance verification. Participation is open to firms capable of demonstrating expertise in the stated technical areas and an understanding of local regulatory frameworks and development processes in Williamson County.

WILLIAMSON COUNTY

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Solicitation # SPEFA5-26-T-0975

The contract specifies the procurement of 25 units of a cushion identified by NSN 5330-LN-002-7833 and part number SPD65E-1701-055, with a total contract value of $25.00 per unit delivered FOB destination within 48 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow DLA Packaging Requirements for Procurement (RP001) and be palletized accordingly, while the material itself has no shelf life restriction. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes must be verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Inspection and acceptance occur at the destination, with no允许 variance in quantity. Delivery must be sent to the specified freight address at Cherry Point, North Carolina, with a required delivery date of August 4, 2026, and must be prepared for shipment in accordance with the defined unit of issue and packaging protocols.

Other Support Activities for Air Transportation

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Handling and Transportation SupportThe contract requires comprehensive support for hazardous material handling, packaging, and transportation in strict alignment with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable Department of Transportation regulations. Central to this effort is the provision of Safety Data Sheet documentation to ensure all hazardous materials are properly identified, labeled, and managed throughout the supply chain. The contractor must ensure full compliance with regulatory frameworks governing the safe transport and storage of dangerous goods, including accurate labeling, documentation, and procedural adherence to mitigate risks during handling and transit. Performance of this subcontract is mandated at Cherry Point, North Carolina with a zip code of 28533-0021, and falls under NAICS code 488510, indicating specialized support activities for transportation. The opportunity was posted on August 3, 2026, with responses due by August 11, 2026, and is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. This subcontract does not specify a set-aside classification, and the point of contact information is not provided, requiring proposers to engage directly through the DIBBS portal using the provided link to access full solicitation details.

Freight Transportation Arrangement

POSTED

DEADLINE

Military-Compliant Packaging and Palletization ServicesThe contract requires the provision of packaging, labeling, serialization, and palletization services fully compliant with MIL-STD-129 and DLA RP001 standards for defense logistics shipments. This includes rigorous adherence to UID marking requirements for individual items and container tracking, as well as the application of approved corrosion protection measures to ensure long-term readiness and preservation of military equipment during transport and storage. All processes must meet exacting Department of Defense specifications for traceability, durability, and uniformity across the supply chain. Performance is designated for Cherry Point, North Carolina, with a response deadline of August 11, 2026, and the solicitation is classified as a subcontract under NAICS code 493190. The contracting activity falls under the DLA Fleet Readiness Center DLA PSC, an agency within the Department of Defense, emphasizing the critical nature of the logistics support being procured. All deliverables must align precisely with federal military logistics protocols to support readiness and operational deployment across the defense enterprise.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machined Bracket SupplyThe contract specifies the manufacture and delivery of a precision machined bracket with part number 65207-10016-101 and national stock number 1560LLNC08851, requiring full compliance with military standards including MIL-STD-1916 for quality assurance, MIL-STD-129 for labeling and marking, and the DLA Master List specifications. All work must be performed to meet stringent defense department requirements for dimensional accuracy, material integrity, and inspection protocols, with delivery addressed to the designated location in Cherry Point, North Carolina, 28533-0021. The solicitation is issued as a subcontract under NAICS code 332999, with a response deadline of August 11, 2026, and was posted on August 3, 2026, by the Department of Defense through the DLA Fleet Readiness Center DLA PSC.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA5-26-T-0972

The contract pertains to the supply of a critical application bracket identified by part number 65207-10016-101 and NSN 1560LLNC08851, with a quantity of one unit to be delivered within 35 days to the Fleet Readiness Center DLA in Cherry Point, North Carolina. Delivery is FOB destination, with inspection and acceptance also occurring at the destination and no variance permitted in quantity. The item is non-shelf-life-coded and subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which overrides any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization aligned to these directives. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. Marking of the bare item and packaging must adhere to RQ017 physical identification standards. The unit of issue is each, priced at $1.00, under solicitation SPEFA5-26-T-0972, with an original delivery date of October 17, 2026, and the solicitation was posted on August 3, 2026, with responses due by August 11, 2026.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply Chain Compliance and Reporting (DPAS & Counterfeit Parts)The contract requires strict adherence to DPAS regulations under 15 CFR Part 700 and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.246-7007 for the detection and mitigation of counterfeit parts within the supply chain. This includes establishing documented processes for identification, quarantine, and reporting of suspicious or nonconforming components, as well as implementing comprehensive training programs for personnel involved in procurement, inspection, and logistics functions. All activities must be fully traceable, with accurate and timely reporting to ensure regulatory compliance and the integrity of defense-critical components. The subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a submission deadline of August 7, 2026, and is linked to NAICS code 541611, reflecting its focus on management consulting services related to supply chain compliance. Performance must align with federal standards for counterfeit part prevention, demanding robust internal controls, audit readiness, and continuous improvement of detection methodologies. While specific location details are not provided, the place of performance is expected to support defense logistics operations, and all compliance measures must be operational and verifiable throughout the contract lifecycle.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, barcoding, and shipping preparation services for Department of Defense hardware managed by the DLA Fleet Readiness Center under the DLA PSC. All activities must strictly adhere to MIL-STD-129 and ASTM D3951 standards to ensure uniformity, durability, and compliance across military logistics. This includes the accurate application of DoD-compliant data marking to support traceability, inventory control, and receipt verification throughout the defense supply chain. The work involves end-to-end preparation of shipments to meet federal military requirements, with a focus on quality, consistency, and regulatory alignment. The solicitation is issued as a subcontract under NAICS code 493190, with a response deadline of August 7, 2026, and was posted on July 31, 2026. The place of performance and specific geographic details are not specified, indicating flexibility in location as long as contractual obligations are fulfilled. All deliverables must align with DLA’s operational standards for defense logistics, and contractors must be prepared to support the full lifecycle of hardware packaging from preparation through final shipment without deviation from mandated protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Fastener Manufacturing (NAS1958 Series Bolt)The contract requires the manufacture of precision aerospace fasteners, specifically referencing NAS1958C28 bolts and other components governed by NAS1953 through NAS1970 specifications. Manufacturing must adhere to exacting dimensional, material, and performance standards mandated for aerospace applications, with comprehensive quality control measures including rigorous inspection protocols and full lot traceability from raw material origin through final delivery. All processes must comply with defense industry quality systems to ensure dimensional accuracy, surface finish, heat treatment compliance, and mechanical properties meet stringent military and aerospace requirements. This is a subcontract opportunity issued by the Department of Defense through the DLA Fleet Readiness Center, with a response deadline of August 7, 2026. The North American Industry Classification System code 332722 indicates the focus is on screw, bolt, and nut manufacturing. Performance will occur under the oversight of a defense logistics agency, though specific location details are not provided. Bidders must be prepared to meet federal subcontracting obligations, including documentation for quality assurance, compliance with defense supply chain standards, and the ability to support long-term production schedules with consistent supply chain reliability.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA5-26-T-0947

The contract is for the procurement of two tube assemblies, identified by part number 901-060-380-101 and NSN 1560-LL-CFQ-B165, manufactured to drawing 901-060-380 with cage code 97499. Performance is required within 95 days after order, with a firm delivery deadline of December 24, 2026, and delivery must be made FOB destination to the Fleet Readiness Center DLA at Cherry Point, North Carolina. The contract is awarded under solicitation SPEFA5-26-T-0947, issued by the Defense Logistics Agency Fleet Readiness Center, and follows streamlined acquisition procedures, with pricing set at $1.00 per unit for a total value of $2.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling and MIL-STD-130N(1) for identification marking, including Data Matrix barcode requirements. Palletization adheres to DLA Packaging Requirements RP001, while preservation follows ASTM D3951 unless overridden by higher-priority DLA standards. Inspection and acceptance occur at the destination, with sampling conducted using MIL-STD-1916 or a zero-defect alternative plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses including those for cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, and electronic invoicing via WAWF. Offerors must hold a valid UEI and CAGE code, and are required to represent their small business status where applicable, with no set-aside specified. The contract type is designated to be determined upon award, referencing Alternate I of FAR 52.216-1, and delivery quantities are fixed with no variance permitted. Hazardous and radioactive materials are subject to specific notification and labeling protocols, and the contractor must comply with all federal regulations governing material safety and data handling.

Other Support Activities for Air Transportation

POSTED

DEADLINE

in about 14 hours

Solicitation # SPEFA5-26-Q-0066

This contract specifies the procurement of a single NAS1958C28R bolt under part number 5306-LN0034747 with a firm fixed price and no variance in quantity allowed. The item must be delivered within 30 days after the award date to the destination specified, with inspection and acceptance occurring upon delivery. The product must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per ASTM D3951 and labeling requirements per MIL-STD-129, with precedence given to the DLA Master List when conflicts arise. Packaging must align with DLA-specific procurement guidelines, including palletization per RP001, and sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and physical identification of the bare item must adhere to RQ017 requirements. The delivery is directed to the Fleet Readiness Center at Cherry Point, North Carolina, with the solicitation number SPEFA5-26-Q-0066 and a response deadline of August 7, 2026, with a required ship date of July 8, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires compliance with MIL-STD-129, ASTM D3951, and the DLA Master List for the packaging and marking of delivered items, ensuring all defense logistics standards are met for military supply chain operations. Work must be performed at Cherry Point, North Carolina, with strict adherence to government-mandated labeling, identification, and packaging protocols to support readiness and traceability across Department of Defense systems. The solicitation is structured as a subcontract under NAICS code 423840, indicating a focus on wholesale trade of hardware, plumbing, and heating equipment, and is managed by the DLA Fleet Readiness Center under the Department of Defense. All proposals must be submitted by August 7, 2026, with no set-aside designation specified, leaving the opportunity open to eligible contractors without restrictions based on business size or category.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThe contract pertains to the preparation and submission of hazard labels and Material Safety Data Sheets for hazardous materials to ensure full compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, specifically at the zip code 28533-0021. The work involves accurately generating and maintaining documentation that communicates chemical hazards to workers and emergency responders, aligning with federal safety and procurement mandates. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, under the NAICS code 541690, which covers other technical and scientific consulting services, indicating the specialized nature of the compliance and documentation support required.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE