Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Assurance and Source Inspection Services

Active

Federal

Response Deadline11/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Quality Assurance and Source Inspection Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform point-of-origin inspections according to Technical Data Packages, verify Certificates of Quality Compliance, and execute sampling plans using precision measurement tools in accordance with MIL-STD-1916 or ASQ H1331. A critical requirement for this role is the qualification to certify compliance with QAP 13873, with final deliverables consisting of validated certificates and signed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Hill AFB. Interested parties should note the response deadline of November 10, 2026. The work falls under NAICS code 541380, focusing on specialized quality verification and source inspection to ensure all commodities meet strict military specifications.

General Info

Third-party quality assurance and source inspection services for DLA Weapons Support at Hill AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-7983.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, PLATE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs source inspection and quality verification for prime contractors on DLA Weapons Support ASC projects. Conducts point-of-origin inspections per TDP, verifies Certificate of Quality Compliance (CoQC), and executes sampling plans per MIL-STD-1916 or ASQ H1331 using precision measurement tools. Requires qualification to certify compliance with QAP 13873. Delivers signed inspection reports and validated CoQC.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # rfq9783-respirable-crystalline-silica-exposure-assessment

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light FiltersThis subcontract involves performing specialized First Article Testing (FAT) for indicator light filters supporting the DLA Weapons Support Nuclear Reactor Program. The selected contractor will conduct tests on three initial production units to validate that their optical and physical properties comply with MIL-DTL-16377/42C and MIL-DTL-16377K SUP 1 standards. Key operational requirements include coordinating with Quality Assurance Representatives, providing shipment notices 14 days in advance, and delivering final test reports. The work is categorized under NAICS code 541380 and will be performed in Jacksonville, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves validating signal integrity, insulation resistance, and electrical continuity in accordance with reference drawings and MIL-STD-105/ASQ Z1.4 standards. Performance will take place in New Cumberland, Pennsylvania, and requires the use of calibrated Measurement and Test Equipment. To qualify, providers must maintain ISO 9001:2015 or ISO/IEC 17025 certification and ensure full compliance with ITAR and EAR regulations. The successful contractor is responsible for delivering a formal Certification of Compliance and a detailed PLT Test Report. The response deadline for this opportunity is November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform critical validation of manufacturing processes and product compliance for three initial units of NSN 5999-01-463-0571. This scope of work involves utilizing specialized electrical and physical property testing equipment to ensure all specifications are met, with the final deliverable being a formal First Article Test Report due within 30 days of the contract date. To be eligible, the performing facility must maintain approval under ISO 9001 or AS9003 quality systems. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT) ServicesThis subcontract opportunity is for the provision of specialized First Article Testing and Production Lot Testing services to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The scope of work involves conducting First Article Tests on two units and Production Lot Testing on three random samples specifically for Critical Safety Items. To ensure precision and compliance, the contractor must utilize NIST-calibrated metrology equipment and perform material hardness and tensile testing, ultimately delivering certified test reports. Eligible bidders must hold ISO/IEC 17025 or AS9100 certification and meet the requirements for a Total Small Business Set-Aside under NAICS code 541380. The performance of these services will take place in Jacksonville, Florida. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Specialized Testing ServicesThis subcontract opportunity for Specialized Testing Services supports the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The selected provider will perform technical testing and validation for prime contractors, specifically executing electrical functionality and signal integrity tests according to DWG 8126491 Test Procedures. The scope of work involves using specialized test jigs and diagnostic equipment to deliver certified assemblies and detailed test reports. This is a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the defense work, contractors must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract for the DLA Weapons Support Aviation Supply Chain involves providing initial validation testing and quality inspection services for prime contractors. The primary scope of work focuses on the execution of First Article Tests as specified under CLIN 0002, which includes the verification of critical, major, and minor attributes. These inspections must be conducted using sampling plans MIL-STD-1916 or ASQ H1331, and all measuring and test equipment used must be calibrated according to RT001 standards. The project is based at Robins Air Force Base and requires the delivery of an approved first article unit along with a formal FAT Certification Report. Classified under NAICS code 541380, the contract is managed by the Department of Defense. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) for Screw Thread InsertsThis subcontract involves First Article Testing for screw thread inserts to support the DLA Weapons Support ASC Commodities Division. The selected contractor is responsible for performing initial production validation and testing, which includes the production and delivery of three initial units for government testing within 180 calendar days. All units must be validated for dimensions and material properties against Drawing NR 07482 1279M79 using appropriate metrology and inspection equipment, with final deliverables consisting of the test units and detailed inspection reports. The project is a total small business set-aside under NAICS code 541380, with performance taking place at Tinker AFB. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain ITAR/EAR approval. Interested parties must respond by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Traceability VerificationThis subcontract for the DLA Weapons Support Nuclear Reactor Program focuses on providing independent verification of technical compliance and supply chain traceability for prime contractors. The scope of work involves auditing documentation according to DLA Directive Procurement Note C03 and ensuring part marking adheres to MIL-STD-129 and IPC/JEDEC J-STD-609 standards. Additionally, the contractor is responsible for using precision measurement tools to verify lead finishes and delivering comprehensive quality inspection reports and traceability certification packages. The project is managed under NAICS code 541380 for the Department of Defense and will be performed at Hill AFB. Interested parties should note the response deadline of November 13, 2026, for this quality assurance and traceability verification effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThis subcontract for First Article Testing (FAT) and Certification Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will utilize calibrated metrology and inspection equipment to verify the dimensions, material properties, and performance of three sample units against the established technical data package. The primary deliverable for this engagement is one completed First Article Test Report. The opportunity is a total small business set-aside under NAICS code 541380 for the Department of Defense. Due to the nature of the technical data involved, the contractor must maintain ITAR/EAR compliance and hold CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing and Certification for the DLA Weapons Support ASC Commodities Division. The selected contractor will validate manufacturing processes by testing three initial units of NSN 5315-00-495-6522 using precision metrology and inspection equipment. The project requires the delivery of a formal test report and the three tested units within a period of 180 calendar days. The performance of this contract will take place in Tracy, California, under NAICS code 541380. Due to the handling of covered defense information, the contractor must maintain CMMC Level 2 certification. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Blackout Lights (NSN 6220-01-411-3686)This subcontract involves the procurement of 132 specialized blackout lighting units for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The required units must meet the specifications for NSN 6220-01-411-3686 and ELC Industries Corp PN AC-12261. The contractor is responsible for strict adherence to quality control standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 guidelines before delivery to the designated destination point.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Self-Locking Hexagon NutsThis subcontract involves the procurement or manufacture of 72 self-locking hexagon nuts matching NSN 5310-01-723-3029 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all items comply with the Buy American Act and the Nonmanufacturer Rule. The completed order must be packaged and shipped using traceable methods to the Portsmouth Naval Shipyard GF in Portsmouth, zip code 03801-5000. This requirement falls under NAICS code 332722 and is intended for prime contractors delivering on DLA supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, marking, and labeling for components, ensuring all deliverables are fully prepared for transport. Performance takes place in San Diego, California, under NAICS code 488510. The contractor is responsible for adhering to strict military standards, specifically utilizing MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. This includes the use of MIL-SPEC crates, moisture barriers, and cushioning, as well as the application of hazardous material labeling in accordance with the Hazard Communication Standard. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Aircraft Structural Fitting Fabrication (NSN 1560-01-443-9392)This subcontract involves the manufacture of high-precision aircraft structural component fittings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of fittings under NSN 1560-01-443-9392, utilizing precision CNC machining and aerospace-grade alloys in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in San Diego, California. To ensure aerospace standards, the contractor must maintain SAE AS9100 certification, implement CSI quality controls, and adhere to NIST SP 800-171 compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026. The scope of work concludes with the delivery of finished aircraft structural component fittings.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Valve Pistons (NSN 2995-01-094-5562)This subcontract, issued by the DLA Weapons Support ASC Commodities Division for the Department of Defense, requires the manufacture or procurement of 21 valve piston units identified by NSN 299501094-5562. The selected provider must ensure all items are packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. Performance for this contract will take place in New Cumberland, Pennsylvania. To be eligible for the award, contractors must possess a valid CAGE code and Unique Entity Identifier. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026. The project falls under NAICS code 332999 and is intended for prime contractors supporting Department of Defense initiatives.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThis subcontract involves the manufacture of five special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating these assemblies according to reference drawings 55717 MIS-26903 and 18876 13264885, utilizing precision crimping and soldering techniques. All finished products must be properly marked, packaged, and delivered to the performance location in New Cumberland. Strict regulatory and quality standards apply to this project, including mandatory ITAR/EAR compliance, CMMC Level 2, and ISO 9001:2015 certification. Additionally, all materials used in production must adhere to the Buy American Act and Berry Amendment standards. Interested parties must respond by November 10, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

International Freight Forwarding (USA to Jordan)This subcontract involves international freight forwarding services for the Department of Defense, specifically supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for the transport of specialized hardware from FOB Origin to a bulk break point in Weslaco, Texas, followed by the management of international shipping and customs clearance for final delivery to Safawi, Jordan. A critical component of this requirement is the handling of technical data subject to ITAR and EAR export controls, which must be managed through a licensed customs brokerage. Operating under NAICS code 488510, the provider ensures the secure and compliant movement of materials from the United States to the final destination in Jordan.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture of Continuous Thread Stud (NSN 5307-01-652-8969)This subcontract involves the manufacture and supply of continuous thread studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must fabricate hardware according to NSN 5307-01-652-8969 specifications using precision threading machinery. Quality assurance is critical, requiring inspections performed per MIL-STD-105/ASQ Z1.4 and strict adherence to MIL-STD-2073-1E and MIL-STD-129 packaging standards. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and hold US/Canada Joint Certification. Full compliance with ITAR and EAR regulations is mandatory. The scope of work culminates in the delivery of one inspected and marked stud, with a response deadline set for November 10, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Electrical Wire and Connector SupplyThis subcontract, titled Electrical Wire and Connector Supply, involves the provision of military-grade electrical connectors and specialized wiring for prime contractors working on DLA Weapons Support ASC projects. The scope of work focuses on supplying raw materials and components necessary for NSN 6150-01-645-7577, specifically including protective sleeving and shielded wiring. To maintain strict adherence to military technical data packages, the supplier is required to provide material certifications and Certificates of Conformance for all components delivered to the assembly facility. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this opportunity is designated as a Total Small Business Set-Aside per FAR 19.5. The contract falls under NAICS code 335911. Interested parties should note the posted date of November 2, 2026, with a response deadline set for November 17, 2026.

Storage Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract opportunity involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for assembling NSN 6150-01-645-7577 in strict accordance with technical specifications and the DLA Master List of Technical and Quality Requirements. The scope of work includes the delivery of completed, tested, and packaged assemblies. Compliance is mandatory regarding quality assurance and packaging standards, specifically adhering to MIL-STD-1916 or ASQ H1331 for quality and MIL-STD-2073-1E and MIL-STD-129 for packaging. This project is designated as a Total Small Business Set-Aside under NAICS code 335931. Responses are due by November 17, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Externally Relieved Body Bolts (NSN 5306009668049)This subcontract involves the manufacture and supply of specialized bolts with externally relieved bodies, specifically identified by NSN 5306009668049, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work is performed under NAICS code 334418 with the place of performance located at Tinker AFB. The contractor must adhere to strict quality and regulatory requirements, including AS9100 certification and CSI documentation controls. Key deliverables include the specified quantity of bolts and the results of Government First Article Testing. Additionally, all products must meet SAE AS9100 quality standards, with packaging and marking compliant with RP001 and MIL-STD-129.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing and Validation for Aerospace Pressure Plates

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) and Quality Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Non-Destructive Testing (NDT) for Bomb Bay Door Cords

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Third-Party Aerospace Quality Inspection and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

TEST, METALS, D004-11 & UHC METALS, TCLP

Solicitation # SP450027F0246

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

NUT, PLAIN, BARREL

Solicitation # SPE7M224P2687

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Ultrasonic Testing (UT) Services

POSTED

about 13 hours ago

DEADLINE

VTE Specialized Load Testing (5-Year Certification)

FA4801 49 Cons Pk

POSTED

about 13 hours ago

DEADLINE

HUD Qualification Testing and Evaluation

Ut DLA Aviation At Ogden

POSTED

about 13 hours ago

DEADLINE

NDT Inspection Services (CSI Certified)

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS