Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

THOR IV STS - Award

Awarded
W912CH-26-C-0014Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

RENK America, LLC has been awarded Contract W912CH-26-C-0014 to provide System Technical Support services for the THOR IV program, supporting critical U.S. Army platforms including the Armored Multi-Purpose Vehicle, Bradley Fighting Vehicle, Multiple Launch Rocket System, and Paladin Integrated Management Vehicle. The scope of work encompasses engineering and technical services, program management, and global Field Service Representative support to ensure operational reliability of the Transmission Hydro-Mechanically Propelled Transmission systems. The contract is structured as a Cost Plus Fixed Fee arrangement, authorizing up to 387,059 labor hours over a five-year performance period, with funding obligated through the execution of Completion or Level-of-Effort Work Directives aligned with the contract's general scope. The award follows Solicitation W912CH-24-R-0168 and subsequent negotiations, with performance primarily centered in Muskegon, Michigan, under the oversight of the Department of Defense, specifically the Office of W6QK Acc- Dta located in Warren, Michigan. Primary point of contact is Dane J. Hansen, with Nicholas Moons as the secondary contact.

General Info

RENK America to provide technical support for THOR IV transmission systems via 387,059 labor hours over five years.

Agency

Department Of Defense → W6QK Acc- Dta

Contract Value

$6,331,495

NAICS

541330 - Engineering Services

Place of Performance

Muskegon, MI, 49442, USA

Set-Aside

NONE

Awardee

RENK AMERICA LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
Contacts2 people available
OfficeWARREN, MI, 48397-5000, USA
Organization / AgencyDepartment Of Defense → W6QK Acc- Dta
Office AddressWARREN, MI, 48397-5000, USA
Contacts
Dane J. Hansen
contact@example.gov
Nicholas Moons
contact@example.gov

Full Description

Show more

As a result of Solicitation W912CH-24-R-0168 and subsquent negotiations, Contract W912CH-26-C-0014 is hereby awarded to RENK America, LLC (RENK) for the acquisition of System Technical Support (STS) services for the Transmission Hydro-Mechanically Propelled Transmission [HMPT] Operational Reliability (THOR) IV programin support of the Armored Multi-Purpose Vehicle (AMPV) System, Bradley Fighting Vehilce System (BFVS), Mulitple Launch Rocket System (MLRS), and Paladin Integrated Management (PIM) Vehilce platforms. STS efforts will consist of engineering and technical services, program management and worldwide Field Service Representative (FSR) support for the aforementioned programs.


Contract W912CH-26-C-0014 is a Cost Plus Fixed Fee (CPFF) contract, which provides for the obligation of funds, through award of STS labor hours, to execute Completion and / or Level-of-Effort (LOE) Work Directives (WD) that are within the general scope of the contract. This contract provides for a maximum of 387,059 STS labor hours over a five-year contract term.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
Geotechnical Instrumentation and MonitoringThis subcontract opportunity with Cleary Construction, Inc. involves providing geotechnical monitoring and instrumentation services for municipal sewer improvement projects. The selected contractor will be responsible for ensuring ground stability by installing and managing geotechnical sensors, inclinometers, and settlement markers to track soil and ground movement. A critical requirement for this engagement is that all reporting must be completed by a Professional Engineer (PE). The project is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by December 4, 2026, under NAICS code 541330. The primary deliverables include the provision of detailed instrumentation data and comprehensive monitoring reports.
Cleary Construction, Inc. Cleary Construction, Inc

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this opportunity is Sepideh Aria, who can be reached via email or phone for further coordination regarding the solicitation details.
Kiewit Infrastructure West Co.

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should fall under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical writing. Interested parties must submit their responses by November 17, 2026. Primary inquiries regarding this solicitation should be directed to Liz Jordan-Wettstein.
Aanko Technologies Inc.

POSTED

about 5 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541330
New
SLED
Planning-Level Concept Exhibit & Feasibility SpecialistThis subcontract opportunity is for a Planning-Level Concept Exhibit and Feasibility Specialist to support prime contractors on Orange County Transportation Authority projects. The selected provider will be responsible for developing preliminary project definitions and visual concept exhibits, framing the purpose and need of projects, and identifying operational and physical constraints. Technical requirements include the use of CAD software and GIS, with a strict mandate to comply with Level 1 HSE Specifications. Key deliverables for this engagement include concept exhibits, priority segment profiles, and implementation readiness summaries. The solicitation was posted on October 27, 2026, with a response deadline of November 30, 2026. This role falls under NAICS code 541330 and is managed through the Planning and Analysis division in California.
Planning-Planning & Analysis

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Planning-Level Traffic and Revenue AnalystThis subcontract opportunity is for a Planning-Level Traffic and Revenue Analyst to support prime contractors on Orange County Transportation Authority projects in California. The selected party will conduct high-level assessments of transportation needs and revenue potential, focusing on modeling planning-level tollable demand and analyzing transit considerations along with access and egress. The scope of work requires the use of specialized traffic modeling software and revenue forecasting tools to deliver priority segment profiles and comprehensive summaries of operations, traffic, and revenue. The project falls under NAICS code 541330 and requires strict compliance with Level 1 HSE Specifications. Interested parties must submit their responses by the deadline of November 30, 2026. The primary objective is to provide the necessary data and analysis to determine expected operating benefits for critical transportation infrastructure.
Planning-Planning & Analysis

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Managed Lanes Planning and Segment Screening SpecialistThis subcontract opportunity is for a Managed Lanes Planning and Segment Screening Specialist to support prime contractors on Orange County Transportation Authority projects. The selected provider will be responsible for performing technical analysis, inventorying existing and planned managed lane facilities, and developing risk-based screening methodologies to recommend priority segments. Key deliverables include segment inventories, detailed maps created with GIS software, and editable screening workbooks. The project falls under NAICS code 541330 and requires strict compliance with Level 1 HSE Specifications. Interested parties must submit their responses by November 30, 2026, to support the Planning and Analysis division within the state of California.
Planning-Planning & Analysis

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Orange County Managed Lanes Segment Advancement Study C265256
Solicitation # C265256
The Orange County Transportation Authority is soliciting professional services for the Orange County Managed Lanes Segment Advancement Study, a project with an estimated budget of 350,000 dollars and a duration of 18 months. The primary objective of the study is to evaluate existing, planned, and potential managed lane facilities to identify priority segments ready to advance into the Project Initiation Document phase. The work is structured into four key tasks: project management and coordination, segment inventory and screening, priority segment advancement assessment for up to two segments, and the delivery of a final study report with technical appendices. This is a firm fixed price contract requiring the consultant to provide designated key personnel and adhere to Level 1 Health, Safety, and Environmental specifications, including compliance with CCR Title 8. Invoicing occurs on a monthly basis, with payments remitted within 30 calendar days of approval, and final acceptance is contingent upon the release of retention. Proposals must be submitted electronically via the OpenGov portal by November 30, 2026, and must include a detailed cost proposal across the four specified tasks. Consultants are also required to disclose any conflicts of interest and may be required to file Statements of Economic Interest.
Planning-Planning & Analysis

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
SAT Commissioning and Technical Start-up ServicesThe Nebraska Public Power District is seeking a subcontractor to provide SAT Commissioning and Technical Start-up Services for DVR systems at the Cooper Nuclear Station. The selected provider will be responsible for delivering technical direction and on-site support to prime contractors, focusing on the startup, tuning, and commissioning of the systems. Key technical duties include performing Site Acceptance Testing, aligning power system stabilizers, protectors, compensators, and limiters, and documenting unit response characteristics through on-line tuning. To be eligible for this engagement, the contractor must obtain CNS site access and hold Qualified Manufacturer's Representative status. This subcontract opportunity was posted on October 27, 2026, with a response deadline of January 14, 2027. The primary objective of the contract is the delivery of a fully commissioned and tuned DVR system.
Nebraska Public Power District

POSTED

about 12 hours ago

DEADLINE

in 3 months
View Details
NAICS: 541330
New
SLED
RFQ: Susquehanna River Road Corridor Safety, Shared-Use Path and Quarry Park Access Improvements
Solicitation # BPM059336
The Town of Port Deposit, in coordination with WILMAPCO, is seeking a multidisciplinary planning and engineering consultant to implement an integrated safety and mobility project for the Susquehanna River Road corridor. The scope of work focuses on establishing a context-sensitive safety strategy using the Safe System Approach, determining safe multi-modal access to the planned Hopkins Quarry Park, and evaluating the feasibility and preliminary design of a shared-use path between Granite Avenue and Octoraro Park. The project aims to produce an actionable 30 percent design and basis-of-design package by June 30, 2027, with the potential for future progression to final Plans, Specifications, and Estimates. This is a qualifications-based selection process where the contract will be awarded to the most qualified firm based on equal weighting of their proposed team and key staff, project approach, and related experience in rural corridor safety and riverfront access. Compensation and detailed scope will be negotiated after the selection of the highest-ranked firm; therefore, no fee or price information should be included in the technical proposal. The project is initially funded by the Wilmington Area Planning Council and the Maryland Department of Transportation Kimberly Lamphier Bikeways Grant Program. Selected consultants must provide proof of financial capacity, a bid affidavit, and professional liability insurance of at least 1,000,000 dollars per occurrence, while adhering to federal civil rights and non-discrimination provisions.
Town of Port Deposit

POSTED

about 13 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541330
New
SLED
Traffic Engineering Analysis and Speed Limit RecommendationThis subcontract for Traffic Engineering Analysis and Speed Limit Recommendation involves performing technical analysis of speed data and collision history for prime contractors working on Town of Los Gatos Parks and Public Works projects. The scope of work includes calculating 85th-percentile speeds, reviewing three-year collision histories, and evaluating school zones to ensure compliance with the California Vehicle Code and California AB 382. The selected provider must deliver a Final Engineering Report along with GIS-compatible location data. To qualify for this engagement, the contractor must provide a California-licensed Professional Engineer specializing in traffic engineering. The solicitation was posted on October 27, 2026, with a response deadline of November 28, 2026. This project falls under NAICS code 541330 and is managed by the Parks and Public Works agency in California.
Parks and Public Works

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Engineering and Traffic Surveys Supporting the Town's Speed Limits to Continue Radar Enforcement
Solicitation # 27-004
The Town of Los Gatos, through its Parks and Public Works agency, is soliciting proposals for solicitation number 27-004 to conduct engineering and traffic surveys across 65 designated roadway segments and all existing school zones. The primary objective is to renew the surveys supporting prima facie speed limits to ensure continued legal radar enforcement in compliance with the California Vehicle Code and AB 382. The selected consultant, who must be a California-licensed Professional Engineer qualified in traffic engineering, will perform speed data collection on 31 high-volume segments using radar and 34 low-volume segments using 24-hour mechanical counters. The scope also requires a review of three years of accident history, field checks of each segment, and the delivery of a final engineering report in searchable PDF format containing 85th-percentile speeds and a speed-limit recommendation matrix. The contract is for a one-year term beginning in January 2027 with no option for renewal. Proposers must submit electronic bids by November 27, 2026, and will be evaluated through a two-phase process consisting of a pass/fail responsiveness check followed by a 100-point scoring system based on qualifications, work plan, price, and references. Awardees must maintain significant insurance coverage, including 2 million dollars in general liability, 1 million dollars in automobile liability, and 1 million dollars in professional liability. The agreement includes strict non-discrimination requirements with potential liquidated damages of 100 dollars per day for non-compliance and allows for termination by either party with 15 days written notice. Payment is structured as monthly invoicing with net 30-day terms.
Parks and Public Works

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Fire Alarm System Design and Engineering ServicesThis subcontract for Fire Alarm System Design and Engineering Services involves providing professional design engineering for fire alarm system replacements at California Military Department facilities in San Luis Obispo. The scope of work includes conducting field verification of room uses, dimensions, and network connections to develop comprehensive design plans and specifications specifically for Buildings 618, 738, 854, and 872. The project requires a highly qualified designer holding a NICET Level IV or V certification to ensure all deliverables meet professional standards. The primary objective is the delivery of approved design plans and specifications. Interested parties should note the response deadline of December 1, 2026, for this effort categorized under NAICS code 541330.
California Military Department

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 332216
New
Federal
Solicitation: SMALL ARMS TOOL KIT (NSN: 5180-01-670-9469) - AMENDED
Solicitation # W912CH-26-B-A016
Solicitation W912CH-26-B-A016 is an Invitation for Bid (IFB) issued by the Army Contracting Command - Detroit Arsenal for a single five-year indefinite delivery indefinite quantity (IDIQ) contract. The contract is for the procurement of Small Arms Tool Kits (NSN: 5180-01-670-9469, Part Number: 0631A0000), with a guaranteed minimum quantity of 120 kits and a maximum estimated quantity of 6,404 kits over the five-year period. This procurement is a total small business set-aside and will be awarded as a firm-fixed-price contract to the responsible bidder offering the lowest evaluated price. Bidders must adhere to strict submission requirements, including the delivery of a signed TDPL cover sheet and completion of all representations in the System for Award Management (SAM). Technical compliance requires adherence to ISO 9001:2015 quality standards and the provision of three kits for a 100 percent first article inspection. Deliveries are FOB Destination, with primary distribution to the DDSP New Cumberland Facility. Bids must be submitted electronically via email to the designated contract specialists by the deadline of November 20, 2026.
Saw Blade and Handtool Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
Federal
Technical Data & Logistics SupportThis subcontract, titled Technical Data and Logistics Support, is issued by the Department of Defense under agency W6QK Acc- Dta. The project focuses on the development and delivery of technical manuals and diagnostic data for prime contractors working on U.S. Army ISV projects. Key responsibilities include the creation of interface-control information, parts lists, and logistics data utilizing CAD/PLM systems to facilitate government maintenance and repair operations. The scope of work involves defining data rights and delivery schedules to ensure the timely provision of technical data packages, software diagnostic tools, and logistics manuals. Classified under NAICS code 541330, the opportunity was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332312
New
Federal
Roll Over Protection System (ROPS) FabricationThis subcontract involves the fabrication and supply of safety cages and roll-over protection structures for prime contractors working on U.S. Army ISV projects. The scope of work requires the use of specialized welding equipment to assemble high-strength tubular steel or alloy frames that strictly adhere to Army safety regulations and crashworthiness standards. Deliverables include both standalone and installed Roll Over Protection Systems. Managed under the Department of Defense through agency W6QK Acc- Dta, the project falls under NAICS code 332312. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336390
New
Federal
Chassis & Drivetrain SupplyThe Chassis and Drivetrain Supply subcontract, issued by the Department of Defense under agency W6QK Acc- Dta, focuses on providing critical structural and mechanical mobility components for U.S. Army ISV projects. The scope of work involves the manufacture and delivery of heavy-duty axles, off-road suspension systems, and transfer cases to prime contractors. In addition to hardware delivery, the provider is responsible for supplying reliability and validation test data and identifying technical data rights to support long-term government sustainment. Classified under NAICS code 336390, this opportunity was posted on October 26, 2026, with a response deadline of November 25, 2026. The contract ensures the delivery of essential axle assemblies and suspension kits necessary for the operational success of Army vehicle initiatives.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336311
New
Federal
Powertrain Supply (Engine & Transmission)This subcontract, managed by the Department of Defense under agency W6QK Acc- Dta, involves the supply and integration of primary propulsion systems for U.S. Army Infantry Squad Vehicle projects. The selected provider will be responsible for delivering high-performance automotive engines and transmissions that adhere to strict military specifications, with production scales ranging from 100 to over 1,500 units. Beyond the delivery of completed engine and transmission assemblies, the contractor must provide essential technical data, interface-control information, and detailed parts documentation to ensure long-term sustainment. The opportunity is categorized under NAICS code 336311, with a response deadline set for November 25, 2026.
Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332994
New
Federal
60 MM Mortar Mount
Solicitation # W912CH-27-R-A026
The United States Army Contracting Command Detroit Arsenal is soliciting a two-year, Firm-Fixed Price requirement contract for the procurement of 60 MM Mortar Mounts, identified by NSN 1010-01-561-9234 and part number 13017350. This procurement is a Small Business Set-Aside under NAICS code 332994. The scope of work includes the production of 118 units for the first year and an option for an additional 118 units in the second year. Key deliverables include the hardware, an Acceptance Inspection Equipment Report, and a First Article Test Report. The delivery schedule is the primary evaluation factor and is considered significantly more important than price, with higher ratings awarded to proposals that can deliver 30 or more days sooner than the solicited schedule. Access to the associated Technical Data Package is restricted to U.S. Government agencies and contractors with a Distribution Code D and requires certification under the United States/Canada Joint Certification Program. Contractors must comply with strict Controlled Unclassified Information guidelines, including mandatory DoD training and the signing of non-disclosure agreements. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with inspection and acceptance of supplies occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Proposals must be submitted via email to the designated Contract Specialist by the specified deadline.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
Federal
RECHARGE KIT, VALVE 4210-01-483-9758
Solicitation # W912CH27BA014_SourcesSought
The Army Contracting Command Detroit Arsenal is conducting market research through a Sources Sought Notice, solicitation number W912CH27BA014, to identify qualified vendors for the manufacture of Valve Recharge Kits, NSN 4210-01-483-9758, part number 579K4036. These kits are essential for servicing and resetting fire suppression systems within the M1 Abrams Family of Vehicles. This effort is for government planning purposes only and is not a formal solicitation for proposals. The government is seeking information from both small and large businesses under NAICS code 336992 to determine interest, capabilities, and production lead times. Interested respondents must submit a completed market research survey to Contract Specialist Angelo Wilson by November 5, 2026. A critical requirement for accessing the associated Technical Data Package, which is designated as distribution code D, is having a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. Small businesses must also certify compliance with the nonmanufacturer rule. Responses should include details on quality management systems and production capabilities, with any proprietary information clearly marked as confidential.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
Sources Sought: Domestically Produced Hand and Measuring Tools (ACC-DTA CSO Amend 40)
Solicitation # W912CH26S0001
The Army Contracting Command – Detroit Arsenal (ACC-DTA) Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, serves as a rapid-acquisition gateway to transition cutting-edge commercial technologies into active defense programs. This vehicle supports a diverse customer base, including the Intelligence and Security Command (INSCOM) and six Portfolio Acquisition Executives, focusing on the development, integration, and sustainment of ground vehicle systems to enhance Army modernization and readiness. The CSO utilizes a streamlined, merit-based, multi-phased evaluation process consisting of solution briefs, presentations, and commercial solution proposals. Awards may be issued through 2028 via FAR Part 12 commercial procedures or non-FAR agreements, such as transaction agreements under 10 U.S.C. 4022 and Cooperative Agreements under 31 U.S.C. 6305. The solicitation encompasses various Areas of Interest (AoI) targeting critical capabilities, including the FALCONS prototype for long-range reconnaissance, TIGER Readiness for the Abrams Main Battle Tank engine supply chain, Counter-Unmanned Aircraft Systems (C-UAS) detection, and the Light Tactical Trailer Heavy Chassis (LTT-HC). Funding ceilings for specific prototypes, such as FALCONS, range from 24 million to 30 million dollars depending on the use of government-provided kits. Key requirements include strict adherence to the Buy American Act and Specialty Metals clauses, with a prohibition on reliance on adversarial foreign nations for critical minerals. Technical evaluations focus on mission viability, affordability, and schedule realism, while administrative requirements include SAM registration, a Unique Entity ID, and compliance with NIST SP 800-171 for handling controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336110
New
Federal
Infantry Squad Vehicle Follow-On Market Questionnaire
Solicitation # W912CH-27-RFI-ISV-0001
The United States Army, through the Product Director, Ground Mobility Vehicles, is conducting a market survey via Request for Information W912CH-27-RFI-ISV-0001 to identify capable industry partners for the continued development, production, and sustainment of the Infantry Squad Vehicle family. The initiative focuses on two primary platforms: the ISV-9, designed for a nine-soldier squad, and the ISV-Utility, designed for a five-soldier squad with a cargo utility bed. The government intends to procure a total potential quantity of approximately 20,787 vehicles, with a target contract award in July 2028 and initial deliveries anticipated to begin in the fourth quarter of Fiscal Year 2029. This RFI is used to assess the industrial base's capacity and determine the optimal acquisition strategy. Key technical requirements include compliance with Federal Motor Vehicle Safety Standards for roll-over protection, adherence to MIL-STD-814 and MIL-STD-209K for tie-down provisions, and transportability dimensions defined by MIL-STD-1366 and MIL-HDBK-1791. The government requires unlimited rights to all form, fit, and function data, as well as all training and maintenance materials. Interested respondents must be registered in the System for Award Management and provide detailed information regarding their socioeconomic status, security capabilities for handling Controlled Unclassified Information, and experience with Automotive Industry Action Group quality tools. Responses are due by November 25, 2026.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333995
New
Federal
Manufacture and Supply of Valve Recharge Kits (NSN 4210-01-483-9758)This subcontract involves the manufacture and supply of Valve Recharge Kits, specifically NSN 4210-01-483-9758 and Part No. 57K4036, for prime contractors working on Army ACC-DTA projects. The selected provider must utilize precision manufacturing equipment to produce the kits in strict accordance with the Technical Data Package. To ensure compliance and quality, the contractor is required to maintain a documented Quality Management System and hold a current DD 2345 certification for necessary data access. The opportunity is designated as a total Small Business Set Aside under NAICS code 333995 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026. The primary objective of the agreement is the successful delivery of completed Recharge Kit Valves that meet all specified technical requirements.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 339115
New
Federal
Invitation for Bids - Vision Correction Assembly
Solicitation # W912CH26BA014
The Army Contracting Command - Detroit Arsenal is soliciting bids for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of the Vision Correction Assembly, identified by NSN 4240-01-631-8044 and Part Number 5-1-4208. This non-commercial requirement involves production based on a Government-owned Technical Data Package (TDP) with Distribution Statement D export controls, requiring offerors to have a valid DD Form 2345 certification. The contract includes a guaranteed five-year minimum quantity of 30,690 units, with a maximum estimated quantity of 1,216,196 units. Key performance requirements include First Article Testing of 200 units, Production Lot Testing, and adherence to ISO 9001:2015 quality standards. The government intends to award a single contract to the responsible bidder offering the lowest total price, evaluated across five ordering years and a First Article Test Report. Bids must be submitted electronically by November 13, 2026, with a virtual bid opening scheduled for November 18, 2026. Deliveries are designated as FOB Destination to the Blue Grass Army Depot in Kentucky. Contractors are required to utilize the Wide Area WorkFlow system for invoicing and must comply with strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1. Access to the TDP may further require a Use and Non-Disclosure Agreement.
Ophthalmic Goods Manufacturing

POSTED

5 days ago

DEADLINE

in 16 days
View Details
NAICS: 541380
New
Federal
First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Closed
Federal
Structural, EMI/EMC, and RF Engineering Analysis
FA8509 Aflcmc Wiuka

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Aircraft Systems Engineering & Integration
FA8509 Aflcmc Wiuka

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Federal
Quality Assurance and Inspection Services
Al DLA Aviation At Huntsville

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
Electronic Warfare (EW) System Support and Testing
FA8533 Aflcmc Rokb

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Quality Control & Compliance Oversight
W7NX Uspfo Activity Pa Arng

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
Annual Leak Monitoring System Testing for ASTs
241-NETWORK Contract Office 01 (36C241)

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Technical Documentation and Certification Services
Aviation Logistics Center (ALC)(00038)

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
Quality Assurance and Inspection Services
FA8139 Afsc Pzimb Software

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
Aerospace Quality Assurance & First Article Testing (FAT) Support
Ok DLA Aviation At Oklahoma City

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Thermographic (Infrared) Inspection Services
US Embassy Kampala

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
Design and Engineering Services (35% Submittals)
FA6606 439 Conf Pk

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Quality Assurance and Acceptance Testing
DLA Maritime - Norfolk

POSTED

4 months ago

CLOSED

4 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS