Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Threading Machine and Cabinet Stand

Active

W911S226U3822Federal

Response Deadline07/31/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation for a Threading Machine and Cabinet Stand is issued under solicitation number W911S226U3822 by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. This is a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses can compete for this award, with the North American Industry Classification System code 333517 indicating it pertains to industrial machinery manufacturing. The opportunity was posted on July 25, 2026, and responses are due by July 31, 2026, at 1:00 PM Eastern Time. The place of performance is listed with a zip code of 74501, though no specific city or state is provided for that location. Primary point of contact for questions and submissions is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or by phone at 918-420-6517. The contract is classified as combined, suggesting it includes both supply and service components, and further details can be accessed through the SAM.gov workspace link provided.

General Info

Small business set-aside for threading machine and cabinet stand, due July 31, 2026, Fort Drum, SAM.gov.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

McAlester Army Ammunition Plant1 C-Tree RdMcAlester, OK 74501, NY, 74501

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 25

Combined Synopsis

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 01:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Cole Budds

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Threading Machine and Cabinet Stand

Similar Contracts

Same NAICS industry code

ROLL SET, ROLLER TUBThis contract pertains to the procurement of a ROLL SET, ROLLER TUB, identified by NSN 3456-00-640-3603, with a required quantity of four units, to be delivered in 167 days under solicitation SPE8E5-26-T-3540. The item consists of two SR28 rollers, one FR4 roller, and one LR28 roller, and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, incorporating R and I numbered specifications. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and marking requirements, and all units must be palletized according to DLA packaging guidelines. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The contract strictly prohibits the intentional use of ozone-depleting substances and mercury or mercury-containing compounds, except for designated functional uses in batteries, instrumentation, or weapon systems as permitted by NAVSEA, with additional containment requirements for portable mercury-containing devices. The contract mandates zero-defect sampling under MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes at VII, IV, and II respectively, and any unspecified attributes treated as major. The technical data package is unrestricted and available for reference. Deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transportation directives and DLA procedural notes. The required delivery date is May 4, 2027, with a need ship date of January 4, 2027, and the solicitation closed on July 29, 2026. The contracting office is under the Department of Defense, with the primary point of contact being Khue Nguyen at DLA’s New Cumberland facility. The unit of issue is SE, and the purchase request number is 7017421876, with pricing and total cost specified under CLIN 0001. All provisions are governed by the revision of the DLA Master List in effect at the time of award, and compliance with technical documentation, including revision A of the TDP under MIL-E-17624B, is mandatory.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CNC Engine Lathe Supply and Technical ComplianceA small business subcontract is being offered for the supply of one new CNC Engine Lathe that must fully comply with federal salient characteristics, including all required factory testing, comprehensive documentation, and submission of a complete technical data package. The contract is under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively reserved for small businesses, and falls under NAICS code 333517 for machine shop, tool and die, and fixture manufacturing. The procurement is managed by the Department of Defense through the W7NF Uspfo Activity Mi Arng, with performance required in Lansing, Michigan, at ZIP code 48906. Interested parties must submit responses by the deadline of August 10, 2026, at 4:30 PM Eastern Time, following the solicitation posted on July 24, 2026, and all deliverables must meet stringent federal technical and compliance standards.

W7NF Uspfo Activity Mi Arng

POSTED

DEADLINE

Rigid Threading Machine SupplyThe contract seeks the supply of a rigid threading machine that complies with federal technical standards for use in industrial machining applications at the Salem VA Medical Center. The equipment must meet stringent performance and safety requirements to support the facility's maintenance and repair operations, ensuring reliable and precise thread creation in metal components. The solicitation is classified as a subcontract and is open for responses until July 30, 2026, with bids due by 3:00 PM Eastern Time. The North American Industry Classification System code for this procurement is 333517, indicating it falls under industrial machinery manufacturing. The contracting activity is managed by the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, with performance exclusively localized to Salem, Virginia, at the ZIP code 24153. No set-aside provisions or small business preferences are specified, and the contract opportunity is publicly accessible via the SAM.gov platform. Although specific technical specifications or point of contact details are not provided in the data, all proposers are expected to align with federal standards governing industrial equipment used in federal facilities.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

ToolsThe contract solicitation for a PROTO 1258 PIECE FOAMED MASTER TECHNICIAN MAINTENANCE SET includes a 66-inch 12-drawer workstation and a 10-drawer top chest, with an amendment modifying the original item and delivery date. The opportunity is issued under solicitation number W911S226U3651 and falls under the NAICS code 333517 for hand and edge tool manufacturing. It is designated as a Total Small Business Set-Aside, restricting participation to small businesses as defined by the SBA. The contracting office is the Department of Defense through W6QM Micc-Ft Drum, located at Fort Drum, NY, with performance expected to occur at a location with a zip code of 22211. The solicitation was posted on July 24, 2026, and responses are due by July 31, 2026, at 4:55 a.m. Eastern Time. Primary point of contact is Anthony Zyla, reachable via phone at 703-614-0476 or email at anthony.j.zyla.civ@army.mil, and further details are accessible through the SAM.gov portal.

W6QM Micc-Ft Drum

POSTED

DEADLINE

ENGINE LATHEThis solicitation is a combined synopsis and request for quote for a single CNC Engine Lathe under the NAICS code 333517, exclusively set aside for small businesses with a size standard of 500 employees. The item must meet the salient characteristics detailed in Attachment A and is to be delivered to the Michigan National Guard’s USPFO S&S Receiving at 3405 N MLK JR BLVD, Lansing, Michigan, no later than 30 days after contract award. Delivery requires access to a multi-bay loading dock during normal business hours, and all shipping, handling, and insurance costs must be included in the quoted price. The contract will be issued as a firm-fixed-price agreement, and invoices will be processed under Net 30 terms through Wide Area Work Flow, with payment contingent upon successful inspection and acceptance at the delivery location. Offerors must submit a two-volume response: Volume 1 detailing their technical approach and capability to meet the requirement, including descriptions and supporting images without rephrasing the specifications, and Volume 2 with pricing structured per the CLIN provided, clearly stating the total extended price and a pricing expiration of at least 60 days. Full compliance with SAM.gov registration is mandatory at the time of award and throughout performance, and a valid self-assessment under NIST SP 800-171 must be submitted via the Supplier Performance Risk System prior to quoting. All submissions must be unpassword-protected, in Microsoft 365 or PDF format, labeled with the solicitation number W912JB26QA077, and include a signed statement of acknowledgment. Proposals must be emailed to two designated addresses by August 10, 2026, at 12:30 p.m. EDT, and failure to include required elements such as UEI, CAGE, tax ID, or past performance evidence may render the quote unacceptable. Evaluation will focus equally on technical approach, past performance, and price, with award going to the offeror providing the best value, not necessarily the lowest price, subject to compliance with all regulations and absence of adverse FAPIIS or SPRS records.

W7NF Uspfo Activity Mi Arng

POSTED

DEADLINE

3419--THREADING MACHINEThe Department of Veterans Affairs Medical Center, through Network Contracting Office 6 in Hampton, Virginia, is conducting market research to evaluate the availability of contractors capable of supplying a Rigid Threading Machine and associated components for the Salem VA Medical Center. This request is purely for information-gathering purposes and does not constitute a solicitation, proposal, or bid opportunity; no formal contract will be awarded based on responses, and the government will not compensate respondents for their submissions. The acquisition, classified under NAICS code 333517 and PSC 3419, targets small businesses with a size standard of 500 employees, and the equipment includes a main threading machine along with 14 specialized tooling items such as die heads, chucks, reams, grooving dies, and bevelling kits, all required in specific quantities and configurations. Interested parties must submit a capability statement via email by 11:00 AM Eastern Standard Time on July 30, 2026, with the subject line including solicitation number 36C24626Q0823. Responses must include company name, SAM registration details including CAGE code and Unique Entity ID, physical address, primary contact information, socioeconomic status, business size representation, existing federal contract vehicles, a detailed capabilities statement aligning with the item requirements, and the country of origin for all offered equipment. All submissions must be in Microsoft Office format and will not be returned or debriefed. Information gathered may inform future procurement actions, but no further communication or clarification will be provided in response to submissions. Phone inquiries are prohibited, and only electronic submissions will be accepted.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Supply and Delivery of DN Solutions DNM 6700 (4th Gen) Machining CenterThe contract entails the procurement, packaging, and delivery of one DN Solutions DNM 6700 3-axis vertical machining center, fully equipped with all standard components including fluids, wiring, and interconnecting parts, ensuring full operational readiness upon arrival. The machine must meet both commercial and military shipping standards, requiring robust packaging and handling protocols to safeguard against transport-related damage. This is a subcontract under the Department of Defense, solicited by DLA Maritime - Puget Sound, with performance designated to occur in Bremerton, Washington, zip code 98314. The solicitation was posted on July 23, 2026, and responses are due by July 27, 2026, with a NAICS code of 333517 indicating classification under Machine Shop, Tool Die, and Mold Making. All deliverables must align with the specified generation—4th Gen—of the DNM 6700, and the contract requires strict adherence to defense supply chain requirements without any set-aside provisions.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Hydraulic IronworkerThe contract calls for the supply and delivery of a new 65-ton industrial-grade hydraulic ironworker to be delivered to Locks 27 at 3291 West 20th Street in Granite City, Illinois, 62040. The equipment must meet the detailed specifications outlined in Appendix A, ensuring it is built to industrial standards for heavy-duty operations. This is a presolicitation notice under solicitation number W912P926QA026, posted on July 23, 2026, with responses due by August 6, 2026. The opportunity is set aside exclusively for small businesses as defined by the SBA under FAR 19.5, and it falls under NAICS code 333517 for forge and stamping, and industrial ironworker manufacturing. The managing agency is the Department of Defense through the W07V Endist St Louis office, located in Saint Louis, Missouri, with Logan Kohrmann listed as the primary point of contact for inquiries, reachable via email or phone. The place of performance is restricted to the specified Illinois location, and all deliverables must fulfill the technical requirements without deviation.

W07V Endist St Louis

POSTED

DEADLINE

Supply of Jewelers’ Lathe (NSN 3416008409717)The contract requires the procurement, packaging, marking, and delivery of three units of a Jewelers’ Lathe identified by NSN 3416008409717, with all work to be performed in full compliance with military packaging, labeling, and identification standards. Delivery is to be made under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The equipment must meet all applicable military specifications for functionality, durability, and documentation to ensure compatibility within defense supply chains. The solicitation is issued as a subcontract under the NAICS code 333517, indicating the nature of the work falls within precision instrument and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the deliverables will be received or inspected. Although no point of contact or solicitation number is provided, the official link to the DIBBS platform is included for further details. The contract does not specify a set-aside designation, suggesting it is open to all eligible suppliers without preferential classification.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hand-Operated Sheet Metal Brake Machine SupplyThe contract involves the supply of one hand-operated sheet metal brake machine with a 24-inch forming width, accompanied by two 3/4-inch tooling components, all of which must meet military specifications for marking, packaging, and preservation to ensure durability and traceability during handling and deployment. The equipment is intended for use by the Department of Defense, specifically under the agency designation SAN DIEGO, with performance required at the zip code 92136-3581. This is a subcontract opportunity with a North American Industry Classification System code of 333517, indicating classification within the industrial machinery manufacturing sector. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, with all deliveries expected to comply with rigorous defense standards for quality and documentation.

POSTED

DEADLINE

LATHE, JEWELER'SThe contract seeks three jeweler’s lathes with specific technical requirements, including a minimum 3.94-inch swing over the bed, a minimum 12-inch bed length, and a minimum 3.25-inch distance between centers. The spindle must be sealed and mounted with Magnus-style collet accommodation, and the tailstock must be plain push type with the same collet compatibility, supporting a maximum 3/16-inch Magnus collet capacity. The lathes must include additional equipment such as two 3-foot round belts, a 0-1/4 inch drill chuck with arbor, a three-jaw chuck with reversible jaws, a wheel chuck sized for 0.221 to 0.523 inches, a full Magnus-style collet set covering sizes 5 through 80, an eight-speed open headstock drive motor with a maximum 3,000 RPM, a three-slide rest with toolpost, a tool set featuring six square cutters, two round cutters, and one round toolholder, and a screw cutting attachment capable of producing both right and left-hand inch threads. This procurement is governed by DLA packaging, technical, and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue or award date, depending on acquisition type. Government identification must be removed from any non-accepted supplies. The NSN is 3416-00-840-9717, and delivery is due within 167 days after order. The solicitation number is SPE8E6-26-T-3789, issued on July 22, 2026, with responses due by August 3, 2026, under the NAICS code 333517, procured by the Department of Defense’s New Cumberland Facility, with Jennifer Roome as the primary point of contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

BRAKE MACHINE, SHEETThis contract specifies the procurement of one hand-operated sheet metal brake machine with a maximum capacity of 16-gauge mild steel and a forming width of 24 inches, equipped with a set of seven distinct bending fingers including two each of 3/4 inch, 1 inch, and 1-1/4 inch sizes, plus two 3 inch and two 6 inch fingers. The item is identified by NSN 3441-01-209-3402 and must comply fully with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation issue date. The brake machine must meet the technical specifications outlined in CID A-A-59484 Revision A, and no mercury or mercury-containing compounds may be intentionally introduced or come into direct contact with the product, except under strictly defined exceptions for specific functional uses such as batteries or instruments, with all mercury-containing portable lamps and devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked following MIL-STD-129, including the special marking code 05 for delicate instruments, with cushioning applied to all sharp edges prior to packaging. Delivery is required FOB origin within 167 days of contract award, with no variance permitted in quantity, and inspection and acceptance will occur at the destination point. The sole delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego CA 92136-3581, and transportation must comply with applicable DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8E5-26-T-3654, posted on July 22, 2026, with responses due August 3, 2026, and the required delivery date is January 31, 2027. The item falls under NAICS code 333517 and is classified as a federal procurement, with Don Trachtman listed as the primary point of contact.

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

10 Horse TrailerA 10-year structural warranty is provided for a 10-horse trailer under a total small business set-aside contracting opportunity, with the NAICS code 336212 for truck and trailer manufacturing. The solicitation, numbered W911S226U3786, was posted on July 24, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, NY. Delivery of the trailer is required no later than 180 days from award and must be made to Fort Myer, Virginia, with a zip code of 22211. The contract is combined in type and issued under the SBA’s total small business set-aside program, ensuring eligibility for qualifying small businesses. Primary point of contact for inquiries is Marisol Lacour, reachable via email at marisol.c.lacour.mil@army.mil.

Truck Trailer Manufacturing

POSTED

DEADLINE

Skid Steer and Attachments The contract titled Skid Steer and Attachments under solicitation number W911S26U3785 is a combined solicitation set aside exclusively for small businesses as defined by the SBA. It pertains to the procurement of a skid steer equipped with necessary attachments including a snow plow, bucket, forks, and material arm, with corrections made to ensure the correct attachments are provided. The delivery is required no later than 60 days from the contract award, with an additional one-day extension granted to accommodate necessary adjustments. The action is being managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, and the place of performance is listed as 22211. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026. Marisol Lacour serves as the primary point of contact and can be reached at marisol.c.lacour.mil@army.mil for inquiries related to this procurement.

Construction Machinery Manufacturing

POSTED

DEADLINE

Speed Radar SignsThe contract titled Speed Radar Signs is a combined solicitation issued under solicitation number W911S26U3797 with a response deadline of July 31, 2026, and posted on July 24, 2026. It is a Total Small Business Set-Aside as defined by FAR 19.5 under the NAICS code 336999, meaning only small businesses are eligible to compete. The contracting activity originates from the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with the place of performance listed as ZIP code 66027. The primary point of contact is Kyle Fratzel, reachable by phone at 520-692-6583 or via email at kyle.a.fratzel.civ@army.mil. This procurement seeks speed radar signs for potential use in defense or military-related operations, though specific quantities or technical requirements are not detailed in the provided metadata. Interested parties must respond by the stated deadline and ensure full compliance with small business set-aside regulations.

All Other Transportation Equipment Manufacturing

POSTED

DEADLINE

Plate ReaderThe instrument required is a high-performance plate reader capable of real-time multimodal measurements including monochromator-based fluorescence, UV/Vis absorbance, and luminescence. It must feature a linear variable monochromator with tunable band passes up to 100nm and a tunable dichroic mirror enabling an air-based light path without fiber optics or light guides. Fluorescence detection requires auto-ranging sensitivity and gain capable of handling signals up to 760 million counts with enhanced dynamic range autoranging that activates in under 0.1 seconds. Absorbance measurements must be performed using a dedicated diode array spectrometer, not a monochromator, capable of capturing a full spectrum from 220nm to 1000nm at 1nm resolution in less than 0.5 seconds with simultaneous wavelength acquisition. The optical head must be heated to maintain a uniform temperature environment for incubated microplate wells during measurement, with a temperature controller capable of reaching at least 45°C. Bottom reading capability, two integrated reagent injectors for automated kinetic and flash luminescence triggering, and an atmospheric control unit with software-adjustable CO2 and O2 levels including 5% CO2 support for cell culture are mandatory. The system must be accompanied by comprehensive software for data visualization and analysis. The contract, titled Plate Reader and identified by solicitation number W911S226U3818, was posted on July 24, 2026, with a response deadline of August 6, 2026. It is a combined solicitation under NAICS code 334516, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The place of performance is listed with zip code 10996, and the primary point of contact is Carl Lundell, reachable at carl.lundell@westpoint.edu or 845-938-8298. The instrument must meet all technical specifications precisely to satisfy experimental and environmental demands of biological applications, particularly those requiring precise temperature, gas control, and rapid, high-resolution optical measurements.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Airfield Lighting for Fort BraggThe contract titled Airfield Lighting for Fort Bragg with solicitation number W911S226U3812 is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5. It is classified under NAICS code 335139 which pertains to other lighting equipment manufacturing, indicating the procurement involves the supply, installation, or maintenance of specialized airfield lighting systems. The solicitation was posted on July 24, 2026, with a firm response deadline of July 30, 2026, at 2:45 PM ET, and is issued as a combined action indicating potential for both solicitation and award under a single process. The contracting activity originates from the Department of Defense under Office W6QM Micc-Ft Drum based in Fort Drum, NY, while the work is to be performed at Fort Bragg/Pope Army Airfield in North Carolina, with a ZIP code of 28308. Primary point of contact for this opportunity is Deanna Orona, reachable via phone at 910-396-7694 or email at Deanna.m.orona.civ@army.mil, who serves as the key liaison for questions or clarifications regarding the solicitation. The place of performance location is specified but does not include detailed city or state names beyond the ZIP code, emphasizing operational focus on the airfield infrastructure. Contractors interested in pursuing this opportunity must ensure they meet all small business eligibility criteria and submit proposals before the deadline to be considered for award. The full solicitation details and documents can be accessed through the official SAM.gov workspace link provided.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

LabbotThe Labbot instrument must simultaneously acquire real-time data across multiple analytical modes including fluorescence, absorbance, light scattering, and pH/conductivity to enable comprehensive analysis of protein behavior in dynamic conditions. It must support fully automated experiments for phase separation, protein interactions, aggregation, thermal stability, ion binding, and pH stability, with integrated automated titration capabilities. Temperature and mixing speed must be precisely controllable to ensure reproducibility across users and experiments. The system should operate without proprietary consumables to minimize running costs and maintain accessibility, while including comprehensive software for experiment setup, data collection, and analysis. The instrument must demonstrate high reproducibility to ensure consistent results among different operators and laboratories. All functionality must be delivered as a complete, turnkey solution with no reliance on third-party proprietary reagents or hardware components. This procurement is issued under solicitation number W911S226U3820 by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The opportunity is open to all eligible respondents with a response deadline of August 7, 2026, at 9:00 PM Eastern Time. The contract is classified under NAICS code 334516 for laboratory analytical instrument manufacturing. The primary point of contact is Carl Lundell, reachable at carl.lundell@westpoint.edu or 845-938-8298, and the place of performance is designated as zip code 10996. The solicitation is a combined opportunity under federal acquisition regulations, and no specific set aside applies.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

CompressorThe contract solicits a single-stage oil-flooded rotary screw air-cooled compressor rated at 460 volts, three-phase, 60 hertz with a flow capacity of 344 cubic feet per minute and a discharge pressure of 125 pounds per square inch gauge, powered by a 75 horsepower main motor. The solicitation, identified as W911S226U3813, is a combined action issued under the Small Business Administration’s Total Small Business Set-Aside program, targeting exclusively small businesses as defined by FAR 19.5, with a NAICS code of 333415 for industrial machinery manufacturing. The offering is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, and responses must be submitted by 6:00 PM Eastern Time on July 29, 2026, following a posting date of July 24, 2026. The point of contact for inquiries is Rachel Rosenbaum, reachable via phone at 254-287-0304 or email at rachel.r.rosenbaum.civ@army.mil. The anticipated place of performance carries a zip code of 76544, though no specific city or state is provided in the documentation. Interested small business vendors must respond through the designated SAM.gov portal linked in the solicitation. All terms are aligned with federal acquisition regulations, and the procurement is intended to satisfy a defense department need for reliable industrial air compression equipment.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Electronic Scissor LiftThe contract calls for an electronic scissor lift branded as JLG or an equal model with part number ES1932, designed for both indoor and outdoor use with a 24V DC electric drive system for high efficiency. The unit must have a maximum width of 32 inches to navigate standard doorways and a stowed height of 78.2 inches, weighing no more than 3,450 lbs. It must achieve a platform height of at least 19 feet and support a minimum load capacity of 507 lbs, with an extendable deck offering at least 36 inches of additional outreach. The lift must accommodate two personnel indoors and one outdoors and be operable while fully elevated, with a minimum gradeability of 25 percent. Safety features include quickly folding rails equivalent to QuikFold, an active pothole protection system, and a load sensing system to enforce safe operational limits. The operator platform must include a built-in USB charger and a device holder for convenience. This is a total small business set-aside under NAICS code 333924, solicited by the U.S. Army at Fort Drum, New York, with responses due by July 31, 2026, and the contract was posted on July 24, 2026. Primary point of contact is Sarah Long, with secondary contact Mark Hill providing additional support.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Plasma Laboratory SystemThe Plasma Laboratory System contract is a combined solicitation issued by the U.S. Department of Defense under the Office of W6QM Micc-Ft Drum, specifically targeting small businesses through a total small business set-aside as defined by FAR 19.5. The solicitation, identified by number W911S226U3778, was posted on July 24, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 334516 for other measuring and controlling device manufacturing. The place of performance is located at ZIP code 10996, while the contracting office is based at Fort Drum, New York, with primary point of contact Daniel Schultz, reachable via phone or email for inquiries. The system is intended for use within a plasma laboratory environment and is being procured to support defense-related research or operational capabilities, with all eligible bidders required to qualify as small businesses under SBA guidelines.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

M1 and M2 Zinc SleeveThe contract titled M1 and M2 Zinc Sleeve is a combined solicitation issued under solicitation number W911S26U3733 by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is a Total Small Business Set-Aside as defined under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 332999, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The original response deadline was extended due to insufficient quotes received, with the new response deadline set for August 7, 2026, at 4:55 AM Eastern Time. The place of performance is listed with a zip code of 71602, though the city and state are unspecified. Amanda Heird serves as the primary point of contact for the solicitation, reachable via phone at 870-540-2935 or email at amanda.d.heird.civ@army.mil. The opportunity is accessible via the SAM.gov website for further details and submission.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Traumatic Brain Injury ModalityThe U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum, has issued a combined solicitation for a Traumatic Brain Injury Modality under the small business set-aside program, exclusively reserved for total small business concerns as defined by FAR 19.5. The solicitation, identified as W911S226U3807, was posted on July 23, 2026, and requires proposals to be submitted by 8:00 PM Eastern Time on July 31, 2026. The NAICS code 622110 identifies the contract as pertaining to hospitals, indicating the focus is on medical services or systems related to traumatic brain injury care. The primary point of contact is Bruce Seidman, reachable via email at bruce.m.seidman.civ@socom.mil or phone at 2704614127, with the contracting office located at Fort Drum, New York, 13602-5220. Although the place of performance zip code is listed as 42223, the specific location is not detailed, suggesting potential flexibility or further clarification will be required during award. The contract opportunity is accessible via the SAM.gov platform for registered bidders seeking to respond to this set-aside for advanced medical modalities targeting traumatic brain injury treatment and rehabilitation.

General Medical and Surgical Hospitals

POSTED

DEADLINE