Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

THUMBSCREW

Awarded

SPE4A6-26-T-20PGFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified by number SPE4A6-26-T-20PG, is issued by the Defense Logistics Agency ASC Commodities Division for the procurement of 96 thumbscrews under National Stock Number 5305-01-377-0950. The contract requires adherence to specific DLA packaging requirements and incorporates technical and quality standards found in the DLA Master List. Delivery is required within a 79-day Additional Delivery Office period. The procurement falls under NAICS code 332722, and the place of performance is designated as New Cumberland. The contract includes strict regulatory compliance measures regarding data security and export controls. Technical data associated with this item is subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR), meaning disclosure to foreign persons is prohibited without prior authorization from the Department of State or Department of Commerce. Contractors must possess an approved US/Canada Joint Certification Program certification and complete specific training to access export-controlled data. Additionally, the contract mandates the removal of government identification from non-accepted supplies and stipulates that covered defense information applies.

General Info

DLA procurement of 96 thumbscrews for delivery to New Cumberland within 79 days.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$960

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

SEAL DYNAMICS LLC

Award Issued Date

09/02/2026, 12:00:00 AM UTC

Documents

2

SPE4A6-26-T-20PG Request for Quotations

19 pages · rfq

High

SPE4A6-26-P-0G52 - Order for Supplies or Services

award

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 19

Solicitation

AwardedSep 2

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

ANGELA CARABALLO

contact@example.gov

Full Description

Show more

DLA award SPE4A626P0G52 posted on DIBBS. Awardee: SEAL DYNAMICS LLC (CAGE 5N582) Total Contract Price: $960.00 Award Date: 09-02-2026 Solicitation: SPE4A6-26-T-20PG Line items: - THUMBSCREW (NSN/Part 5305013770950, PR 7016845984)

Similar Contracts

Same NAICS industry code

Solicitation # N0038327QTA09

Solicitation N0038327QTA09, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of machine bolts, specifically NSN 5306-01-706-0165 (Reference 81205 BACB30PW4P16). The government intends to make a single award to a responsible offeror based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) to assign color ratings. Amendment 0001 updated the required quantity from 2 to 1 and cancelled CLIN 0001AA. The contract requires delivery within 90 days on an FOB Destination basis. Strict adherence to quality management systems such as ISO 9001 or SAE AS9100 is mandatory. Packaging and marking must comply with MIL-STD-2073, MIL-STD-129, and MIL-STD-130, with specific requirements for Item Unique Identification (IUI) and electrostatic discharge protection where applicable. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The procurement also incorporates various Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses regarding the Buy American Act, cybersecurity, and the prohibition of certain foreign telecommunications equipment.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

Solicitation # N0038326QTA66

The solicitation seeks quotes for MACHINE SCREWS under solicitation number N0038326QTA66, issued by the Naval Supply Systems Command Weapon Systems Support, with theNAICS code 332722 and a response deadline of May 29, 2026 at 4:30 PM EST. All submissions must be emailed to [email hidden], and late submissions will not be considered. The solicitation employs competitive procedures, but if only one acceptable quote is received, the Government will transition to sole source negotiations. The award will be made to the offeror whose quote is technically acceptable and most advantageous to the Government, with price and lead time as key evaluation factors. Early and incremental deliveries are preferred. The contract applies specifically to P-8 CAT 1 and CAT 2 items and incorporates additional commercial item requirements under FAR 52.212-4, including mandatory notification and approval for any engineering changes affecting interchangeability, performance, safety, reliability, FAA certification, or part re-identification. Contractors must provide documentation such as Service Bulletins or OEM change notifications and obtain written authorization prior to implementing any such changes. The contract also incorporates numerous federal requirements including Buy American provisions, Equal Opportunity for Workers with Disabilities, Annual Representations and Certifications under Deviation 2025-O0003 and 2025-O0004, and instructions for invoice and receiving report submissions. Contract documents are considered officially issued upon electronic transmission or mail deposit. The primary point of contact is Carolyn A. Clark, reachable via email or telephone at [phone hidden], with performance and delivery to be coordinated within the U.S., specifically through the Philadelphia office.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

NUT,SELF-LOCKING,HE

Solicitation # N0010427QFA11

This fixed-price contract, solicitation number N00104-27-Q-FA11, is a total small business set-aside for the procurement of 368 self-locking hex nuts (Part Number NASM 17828-6C, NSN 5310-01-540-9579). The material is designated as Special Emphasis material for use in crucial shipboard systems, meaning that incorrect or defective parts could lead to serious personnel injury or loss of the ship. Consequently, the contractor must adhere to strict quality assurance standards, including ISO-9001 and ISO-10012, and provide a comprehensive certificate of compliance and objective quality evidence. The nuts must be manufactured from QQ-N-281 Class B Cold Drawn material and meet specific toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The contract is awarded on an FOB Destination basis with final delivery required within 210 days. A critical delivery milestone requires all certification data to be submitted via Wide Area WorkFlow (WAWF) 20 days prior to delivery for review and acceptance by the Portsmouth Naval Shipyard. Inspection and acceptance will occur at the origin. The government will utilize a single-award process where past performance is weighted as more important than price, utilizing the DoD Supplier Performance Risk System (SPRS) for evaluation. Additional requirements include strict material traceability per MIL-STD-792, mercury-free manufacturing, and compliance with the Buy American and Balance of Payments Program.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-533-2066)This subcontract involves the supply of aviation-grade hexagon head cap screws under NSN 5305015332066 for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The contractor is responsible for manufacturing or sourcing fasteners that meet strict quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and labeling requirements governed by ASTM D3951, MIL-STD-129, and MIL-STD-130N. Performance will take place in Fort Hood, Texas, under NAICS code 332722. To be eligible, the provider must ensure full adherence to the Buy American Act and maintain cybersecurity compliance in accordance with DFARS 252.204-7012. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Plain Studs (NSN 5307007744572)This subcontract involves the manufacture or procurement of 448 plain studs matching NSN 5307007744572 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The selected provider must possess a valid CAGE code and ensure all deliverables are accompanied by a Certificate of Conformance in accordance with FAR 52.246-15. The contract falls under NAICS code 332722 and requires delivery to a designated government location in Anniston, Alabama. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Supply of Shoulder Screws (P/N 1045462-001)This subcontract involves the supply of four shoulder screws, identified by Part Number 1045462-001 and NSN 5305017354751, to prime contractors supporting DLA supply contracts. The procurement is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, with the place of performance located in Fort Bliss, Texas. The contractor must ensure all deliverables strictly adhere to MIL-STD-129 marking requirements and MIL-STD-2073-1E packaging data. The opportunity was posted on October 27, 2026, with a response deadline of November 4, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supplier of Machine Screws (NSN 5305-01-645-5118)This subcontract involves the supply of specialized machine screws, identified by NSN 5305-01-645-5118, for prime contractors working on DLA Weapons Support ASC projects. The selected supplier is responsible for manufacturing or sourcing the screws in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Quality assurance must be maintained through sampling performed per MIL-STD-1916 or ASQ H1331, while all shipments must be packaged and marked according to MIL-STD-129 and ASTM D3951/RP001 standards. The scope of work requires the delivery of two machine screws FOB Origin to Fort Carson, Colorado. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and falls under NAICS code 332722. Interested parties must adhere to the specified response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

STUD, CONTINUOUS THREADED

Solicitation # SPE4A622PG806

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

NUT, SELF-LOCKING, PL

Solicitation # SPE4A6-26-P-X762

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

BOLT, CLOSE TOLERANC

Solicitation # SPE4A7-26-T-712U

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 months ago

CLOSED

about 2 months ago

NUT SPACER, PLATE

Solicitation # SPE4A6-26-T-17HM

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Solicitation # SPE4A626F404Z

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

NUT, SELF-LOCKING, HEXAGON

Solicitation # SPE7L126FAMF4

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Solicitation # SPE4A6-26-T-52H3

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Solicitation # SPE7L5-26-T-3400

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE4A6-26-T-25ZN

ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago

STANDOFF, THREADED, SPACING

Solicitation # SPE7L1-26-T-04N2

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

WASHER, RECESSED

Solicitation # SPE4A6-26-T-19GZ

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A6-26-T-93K7

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS