Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TIMER, INTERVAL

Active
SPE4A6-26-T-14NFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 12 units of a precision timer, part number INMW2/24HD6A, with NSN 6645-01-521-3180, under solicitation SPE4A6-26-T-14NF. Delivery is required within 145 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 05 indicating it is a delicate instrument. All packaging materials must be certified mercury-free, and the use of mercury or mercury-containing compounds is strictly prohibited in preservation, packaging, packing, and marking, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents as outlined by NAVSEA, with additional containment requirements for those exceptions. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. Technical and quality obligations are governed by the DLA Master List of Requirements, with the applicable revision controlled by the solicitation or award date. Unit of issue is each, with no quantity variance permitted. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract includes requirements for source approval documentation, defense information handling, and adherence to DLA packaging and transportation standards. Item Unique Identification is not required per the Service customer’s request. The contract is issued under the Department of Defense, with Katisha Carter as the primary point of contact.

General Info

Procure 12 precision timers, deliver in 145 days, comply with MIL-STD-2073-1E and MIL-STD-129, mercury-free packaging, zero defects.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14NF for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Katisha Carter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TIMER,INTERVAL
TIMER,INTERVAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
PRECISION TIMER COMPANY, INC. 21687 P/N INMW2/24HD6A PRIME TECHNOLOGY LLC 0BHF9 P/N INMW2/24HD6A
SPE4A6-26-T-14NF
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486795 0001 EA 12.000
NSN/MATERIAL:6645015213180
DELIVERY (IN DAYS):0145
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ALL PACKAGING MATERIAL SHALL BE CERTIFIED AS MERCURY FREE.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
SPE4A6-26-T-14NF
SECTION B
PR: 7017486795 PRLI: 0001 CONT’D
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:01/17/2027
SPE4A6-26-T-14NF NSN/Part Number: 6645-01-521-3180 Quantity: 12 EA Purchase Request: 7017486795QTY: 12 Delivery: 145 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
T-Square Unit Supply and DeliveryThe contract involves the procurement, packaging, marking, and delivery of five T-Square devices identified by NSN 6675-00-526-5936, all of which must meet applicable military specifications and delivery standards. The equipment is intended for use by the Department of Defense under the Construction & Equipment MRO SVC I program, with performance required at the specified location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation, categorized as a subcontract, falls under NAICS code 334519 and was posted on August 9, 2026, with responses due by August 20, 2026. All activities including packaging and marking must adhere strictly to military requirements to ensure operational readiness and logistics compliance upon delivery.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
Supply of Vise Block, Pull Tester with Military ComplianceThe contract requires the supply and delivery of one Vise Block, Pull Tester identified by NSN 6635-01-283-8757 and Part Number ATI520CT8, with full compliance to military packaging, labeling, and hazardous materials standards. The item must be delivered to Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, ensuring all logistical and regulatory requirements are met for Department of Defense receipt and use. The contract is structured as a subcontract under NAICS code 334519, and the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and all deliverables must align with federal and military specifications to ensure operational readiness and safety.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
VISE BLOCK, PULL TES
Solicitation # SPE4A6-26-T-14PW
The contract pertains to the procurement of one Vise Block, Pull Tester, identified by NSN 6635-01-283-8757 and part number ATI520CT8, under solicitation SPE4A6-26-T-14PW. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in accordance with ASTM D3951, with all labeling and marking complying with MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and sampling is governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required unless otherwise specified. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The item must be shipped via the fastest traceable means, excluding parcel post, and delivered to the designated DLA distribution center at Tinker AFB, Oklahoma. The required delivery date is June 17, 2026, with no tolerance for quantity variance—exactly one unit must be supplied. The contract references multiple technical and quality provisions identified by R and I numbers from the DLA Master List, whose specific revisions are controlled based on the acquisition size and applicable dates. Packaging unit of issue and quantity per unit pack are strictly defined by the contract. The point of contact is Katisha Carter, and the contracting activity is the ASC Commodities Division of the Department of Defense. Government-specific identifiers, including IPD, DIC, DIST, ADV, and FC codes, are included for internal use, and the supplier must ensure all markings comply with RQ011 and RQ017 requirements regarding removal of government identification from non-accepted items and physical identification of bare items.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, ACCUMULAT
Solicitation # SPE4A4-26-T-0183
The contract specifies the procurement of one unit of an Indicator, Accumulat with NSN 6680-01-129-9564, issued under solicitation SPE4A4-26-T-0183 with a response deadline of August 17, 2026, and a required delivery within 20 days of award. The item is subject to strict cybersecurity and export control requirements, including mandatory CMMC Level 2 certification for any third-party assessors and compliance with DFARS provisions governing Covered Defense Information and export-controlled technical data. Technical data associated with this item is governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and access is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaire approval. Physical identification or bare item marking is required per RQ017, and inspection and acceptance must occur at origin under RQ009. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i) at the service customer’s request. Packaging must adhere to DLA standards, and unauthorized government identification must be removed from non-accepted supplies. All technical and quality requirements referenced by R or I numbers are defined in the DLA Master List of Technical and Quality Requirements accessible via the provided web portal. The place of performance is Silverdale, WA, 98315-7000, with primary point of contact Parag Shah at DLA.
SUPPLIER OPER SUPPLIER SPT DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
FILM, RADIOGRAPHIC
Solicitation # SPE4A5-26-T-336V
This contract pertains to the procurement of film, radiographic, identified by NSN 6635-01-279-7632 and part number 3JZVF, classified as a commercial off-the-shelf (COTS) item with a Type II shelf life of 36 months, extendable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with special code 33 indicating Type II shelf life. The item is not subject to Item Unique Identification as specified under DFARS 252.211-7003(c)(1)(i). Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Delivery is FOB origin with a strict 20-day lead time, quantity fixed at two picture groups with zero variance allowed, and inspection and acceptance occur at origin. The freight forwarder is DEG005, with final delivery to the EAF C-130H Supply Depot in Cairo, Egypt. The contract is issued under solicitation SPE4A5-26-T-336V, with a required delivery date of August 12, 2026, and the unit of issue is PG as defined by DoD standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, FEELER
Solicitation # SPE4A5-26-T-337Q
The contract is for the procurement of two GAGE, FEELER units with NSN 6695-00-476-2061 under solicitation SPE4A5-26-T-337Q, with a response deadline of August 17, 2026, and a required delivery within 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Items must be physically marked as required, and strict export control protocols apply due to the presence of technical data regulated under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA approval. The place of performance is Norfolk, Virginia, 23511-2124, with Yvonne Jackson-Dias serving as the primary point of contact. The procurement falls under NAICS code 334519 and is conducted by the Department of Defense through the ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
T-SQUARE
Solicitation # SPE8E9-26-T-3405
The contract pertains to the procurement of five T-SQUARE units under NSN 6675-00-526-5936, sourced through a fully competitive process in compliance with military and federal specifications. The solicitation number is SPE8E9-26-T-3405, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Delivery is required within 164 days after award, with performance to occur at New Cumberland, Pennsylvania, ZIP 17070-5002. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the version effective on the solicitation issue date controlling for this simplified acquisition. The items must comply with MIL-STD-130N for identification marking of U.S. military property, and DLA packaging standards apply. Government identification must be removed from non-accepted supplies per RQ011, and the contract is subject to Covered Defense Information provisions. The point of contact is Matthew Kruc, reachable via email and phone, under the Department of Defense’s Construction & Equipment MRO Service I.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-268R
This contract pertains to the procurement of a magnetic contactor with part number 6957ED33-2AQ and NSN 6110010787382, requiring delivery of 19 units under solicitation SPE7M1-26-T-268R. The item must be supplied in strict compliance with DLA packaging and preservation standards including MIL-STD-2073-1E and MIL-PRF-23199, with marking per MIL-STD-129 and no special markings required. Delivery is FOB origin with a 165-day lead time to be completed by February 2, 2027, and acceptance occurs at the destination. The contract enforces zero tolerance for non-conformances under sampling protocols governed by MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Mercury and mercury-containing compounds are prohibited except in specified functional components such as batteries, fluorescent lamps, sensors, and weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. CMMC Level 2 self-assessment is mandated for cybersecurity compliance, and configuration changes require formal engineering change proposals or variance requests. All technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements. The delivery point is the DLA Distribution facility in New Cumberland, PA, and transportation follows DLA Procurement Notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
SLED
Environmental Conditions Monitoring System
Solicitation # 40200-eRFQ-001866-2027
The Georgia Department of Agriculture, Laboratory Division, is soliciting quotes to replace its aging environmental conditions monitoring system that currently oversees fifty-eight critical units across laboratory facilities in Tifton and Atlanta, Georgia. These units include refrigerators, freezers, ultra-low freezers, incubators, forced-air drying ovens, and laboratory rooms, all of which require continuous monitoring of temperature and humidity levels to ensure proper storage and experimental conditions. The new system must reliably transmit signals through diverse building materials, including cement block structures, and suppliers must ensure full compatibility with existing infrastructure. Response submissions are due by August 21, 2026, and all proposals will be evaluated based on technical capability, compliance, and cost, with preliminary results made public after the deadline and before final award. Suppliers may be asked to submit catalog pages, manufacturer documentation, or specification sheets referenced in the Cost Worksheet, and failure to provide such information may result in rejection of their offer. The solicitation, identified as 40200-eRFQ-001866-2027, was posted on August 7, 2026, and follows a formal RFQ process open to all qualified suppliers. The State Entity intends to publicly announce the names of all participating suppliers alongside evaluation results prior to final contract award, subject to any protest processes. Procurement is managed by the Georgia Department of Agriculture with Quentin Moore listed as the primary point of contact, reachable via phone and email. The contract will be awarded based on a comprehensive assessment of technical feasibility, reliability, and compliance with all specified requirements, with no set-aside provisions indicated. Suppliers must adhere strictly to submission guidelines to avoid disqualification, and all awarded contracts will be publicly disclosed following resolution of any objections.
Department of Agriculture

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
SLED
Supply of SCBA Facepieces with Bluetooth ConnectivityPolk County Board of Commissioners is seeking a subcontractor to supply self-contained breathing apparatus facepieces equipped with integrated Bluetooth 5.0+ chipsets, designed for seamless wireless communication with external devices. Each facepiece must feature a silicone face seal for optimal comfort and airtight fit, a dual-lens visual system to enhance visibility, and advanced voice transmission technology to ensure clear communication in high-noise environments. The contract is open to qualified vendors responding before the deadline of September 16, 2026, with technical specifications prioritizing reliability, durability, and interoperability with existing emergency response systems. The North American Industry Classification System code 334519 applies, indicating the procurement falls under other instrumentation manufacturing. The solicitation was posted on August 7, 2026, and all submissions must meet stringent technical and performance benchmarks to qualify for award.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334519
New
DIBBS
Supply of Temperature Sensors (NSN 5905-01-195-6909)The contract requires the manufacture and supply of 24 units of a military-specification temperature sensor with part number 5750615-1, aligned with the National Stock Number 5905-01-195-6909, for use in critical defense applications. All units must meet stringent military standards, including compliant markings and packaging to ensure traceability, durability, and operational readiness in demanding environments. The sensors are intended for delivery to a designated performance location in Tracy, California, with a zip code of 95304-5000, under the oversight of the Department of Defense’s Active Devices Division. The solicitation, classified as a subcontract, was posted on August 7, 2026, with responses due by August 18, 2026, and falls under the NAICS code 334519 for other electronic component manufacturing. The procurement is part of a broader effort to secure reliable sensor technology for defense systems, with no set-aside provisions specified, indicating open competition among qualified suppliers.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
Federal
Thermostats and Control Systems SupplyThe contract is for the supply of thermostats and control hardware designed to be fully compatible with newly installed TR rooftop and air handling unit systems. All equipment must be delivered in original packaging with complete documentation to ensure proper installation, operation, and compliance with technical specifications. The requirement is part of a subcontract under the US Embassy Mexico’s Department of State and targets infrastructure upgrades in Mexico City. The solicitation was posted on August 7, 2026, with a firm response deadline of August 24, 2026, at 6:00 PM. The NAICS code 334519 identifies this as a business involving other electronic component manufacturing, indicating the specialized nature of the control systems being procured. Performance of the contract is designated for Mexico City, and suppliers must meet exacting standards for compatibility, packaging, and documentation to qualify.
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Freight & Logistics to Camp Lejeune, NCThe contract is for the transportation of packaged goods from origin to Camp Lejeune, North Carolina, operating under FOB origin terms, which means the seller is responsible for delivering the goods to the carrier at the point of origin, and the buyer assumes all responsibility and risk thereafter. All shipments must comply with military shipping documentation requirements and include coordination for final delivery on the base, ensuring seamless integration with Department of Defense logistics protocols. The North American Industry Classification System code 484220 identifies this as a specialty freight trucking service, indicating the need for experienced carriers familiar with secure, regulated military transport procedures. The solicitation is issued as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline of August 17, 2026, and a posting date of August 9, 2026. Performance is specifically required at Camp Lejeune, NC, with zip code 28542, and bidders must be prepared to handle all logistical, procedural, and compliance elements associated with delivering to a military installation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging & Bar-CodingThe contract requires the packaging and bar-coding of fasteners in strict compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly unitized and marked with standardized identifiers for military logistics. This includes precise labeling, bar-code application, and packaging procedures that meet Department of Defense requirements for traceability, durability, and operational readiness. The work is to be performed at Camp Lejeune, North Carolina, with a zip code of 28542, and must be completed by the response deadline of August 17, 2026. It is classified as a subcontract under NAICS code 561910, which pertains to other support services, and is issued by the ASC Commodities Division under the Department of Defense. All deliverables must conform to federal military specifications without exception to ensure seamless integration into the DoD supply chain.
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation of hazard warning labels and Safety Data Sheets (SDS) aligned with OSHA’s Hazard Communication Standard and MIL-STD-129 specifications for all materials utilized in production or packaging processes. This subcontract is issued by the ASC Commodities Division under the Department of Defense and is targeted at ensuring consistent, accurate, and military-standardized documentation and labeling of hazardous substances. Performance of the work is mandated to occur at Camp Lejeune, North Carolina, with a strict deadline for responses by August 17, 2026, and the solicitation was posted on August 9, 2026. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, emphasizing the specialized nature of compliance documentation development. All deliverables must meet federal safety and labeling requirements to support safe handling, storage, and transportation of materials within military supply chains.
Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener ManufacturingThe contract seeks a subcontractor to manufacture self-locking nuts that meet exacting technical specifications established by DLA, ASME, and applicable material performance standards. The work must ensure dimensional accuracy, mechanical integrity, and compliance with defense-grade quality controls, as these components are critical for operational reliability in high-stress environments. Production will be performed at the designated place of performance in Camp Lejeune, North Carolina, with all delivered goods required to verify adherence to the mandated engineering and materials criteria. Subcontractors must respond by the deadline of August 17, 2026, and be prepared to support the ASC Commodities Division under the Department of Defense. The NAICS code 332721 identifies the scope as screw, bolt, and nut manufacturing, emphasizing the need for specialized expertise in precision fastener production. While no set-aside criteria are specified, the solicitation is structured as a subcontract, indicating integration into a larger defense supply chain. All bids must demonstrate capacity for consistent, high-volume output with full traceability and documentation to satisfy defense quality assurance protocols.
Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Hazard CommunicationThe contract requires compliance with DLA standards for packaging and labeling the Strip Wing in accordance with MIL-STD-129, ensuring all markings and documentation meet military specifications for identification and traceability. Hazard communication protocols must be fully adhered to, including proper labeling of hazardous materials and the timely submission of Safety Data Sheets to ensure regulatory and operational safety. The work is scoped as a subcontract under the Department of Defense’s ASC Commodities Division, with performance mandated at Robins AFB, Georgia, 31098-1887. Responses are due by August 17, 2026, following a posting date of August 9, 2026, and the NAICS code 561910 indicates the work falls under Other Support Activities for Transportation. All activities must support defense logistics requirements without set-aside restrictions.
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Technical Data and Export Control Compliance SupportThe contract requires comprehensive management of ITAR and EAR-controlled technical data specifically related to the Strip Wing, ensuring strict adherence to U.S. export control regulations. Access to this technical information must be restricted exclusively to authorized U.S. persons, with all handling, storage, transmission, and dissemination activities fully compliant with DFARS and DLA export control requirements. The scope encompasses the entire lifecycle of the technical data, including secure documentation processes, personnel clearance verification, and continuous monitoring to prevent unauthorized disclosure or transfer. The work is to be performed at Robins Air Force Base, Georgia, under a subcontract issued by the ASC Commodities Division of the Department of Defense. The solicitation, categorized under NAICS code 541690, closed for responses on August 17, 2026, and reflects a specialized need for expert export control support in defense-related technical data management. Compliance with all applicable federal acquisition and national security protocols is mandatory, and failure to meet these obligations could result in severe regulatory and contractual consequences.
Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Strip Wing Manufacturing and SupplyThe contract mandates the manufacture and delivery of one Strip Wing identified by NSN 1560-01-608-2561, requiring full compliance with DLA technical specifications, MIL-STD-129 marking and packaging standards, and origin inspection protocols to ensure readiness for military use. The item must be produced and shipped to Robins AFB, Georgia, with the delivery location specified by the ZIP code 31098-1887, and all work must align with quality and traceability requirements dictated by the Department of Defense. This is a subcontract under NAICS code 336413, posted on August 9, 2026, with responses due by August 17, 2026. The contract is managed by the ASC Commodities Division and is exclusively for fulfillment through the DIBBS platform, where detailed solicitation documents can be accessed. No set-aside status or specific organization type is designated, and while no point of contact is listed, all technical and administrative inquiries must be directed through the provided DIBBS interface.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding SupportThe contract titled Cybersecurity and CUI Safeguarding Support requires the implementation of NIST SP 800-171 controls to protect Controlled Unclassified Information within a Department of Defense environment. The contractor must develop a System Security Plan and a Plan of Action and Milestones to document security posture, identify gaps, and outline remediation efforts in alignment with federal cybersecurity standards. Compliance with DFARS 252.204-7012 is mandatory, which includes establishing procedures for timely cyber incident reporting and ensuring appropriate response and coordination with government authorities upon detection of security breaches or anomalies. The work is performance-based and focused on achieving continuous compliance and resilience against evolving cyber threats. This subcontract is tied to Tinker Air Force Base with a zip code of 73145-8000 as the primary place of performance and falls under the NAICS code 541512 for Computer Systems Design Services. Issued by the ASC Commodities Division under the Department of Defense, the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The contract does not specify a set-aside type or point of contact, and all work must be conducted in accordance with applicable defense acquisition regulations and cybersecurity requirements to support the secure handling of CUI on federal systems.
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 483110
New
DIBBS
Domestic and International Shipping & Logistics CoordinationThe contract requires comprehensive coordination of ocean and domestic freight logistics to deliver cargo from origin points to Tinker AFB, ensuring strict adherence to U.S. flag vessel requirements and all applicable maritime regulations. Responsibilities include managing the full supply chain process from initiation through final delivery, with precise attention to documentation such as bills of lading and accurate container marking to meet military and federal standards. The work spans both international and domestic leg of the journey, demanding seamless integration of transport modes and compliance with government logistics protocols. This subcontract, solicited under NAICS code 483110 by the ASC Commodities Division within the Department of Defense, is set to expire on August 17, 2026, with proposals due by that date. Performance must occur at Tinker AFB, with the zip code 73145-8000 as the designated place of performance. The solicitation is posted on the DIBBS platform, and interested parties must align their capabilities to fulfill the full scope of logistics coordination under the federal supply chain framework without relying on third-party citations or external documentation beyond the stated requirements.

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, palletization, and labeling services for Side Bleed Air units, strictly adhering to ASTM D3951, MIL-STD-129, and DLA RP001 standards. All work must meet the rigorous technical and procedural requirements set by the Department of Defense to ensure the units are protected during storage and transport under operational conditions. The packaging must include proper preservation techniques to prevent corrosion and degradation, precise palletization for efficient handling, and accurate labeling compliant with military marking specifications. The solicitation is classified as a subcontract under NAICS code 493190 and is issued by the ASC Commodities Division under the Department of Defense. The place of performance is designated as Tinker Air Force Base with a zip code of 73145-8000. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026. Prospective contractors must ensure full alignment with all listed standards and be prepared to demonstrate compliance through documentation and inspection at the performance location.
Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Side Bleed Air Units (NSN: 1660-01-687-9662)The contract obligates the supplier to manufacture or supply 89 Side Bleed Air units identified by NSN 1660-01-687-9662, ensuring full compliance with all applicable Department of Defense technical standards, military specifications, and quality requirements. These units are critical components for military aerospace systems and must meet stringent performance and durability benchmarks established by the Defense Logistics Agency. The work is to be performed at Tinker Air Force Base, Oklahoma, with the delivery schedule and acceptance criteria governed by contractual obligations tied to military readiness and operational deployment timelines. The solicitation is structured as a subcontract under NAICS code 336413, which classifies the industry as Aircraft and Parts Manufacturing. The proposal must be submitted no later than August 17, 2026, with the request for quotation posted on August 9, 2026, through the DIBBS platform. All bidders are expected to demonstrate proven capability in producing defense-grade components, adherence to quality control protocols, and the capacity to meet the delivery schedule without disruption. Non-compliance with any specified technical or procedural requirement may result in disqualification or contract termination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details