Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Tinker AFB is seeking to purchase and install Hussey Seating Maxim wall-attached telescopic bleacher system and replace and remove the existing bleachers

Active
FA81362600005Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government is seeking a qualified contractor to remove and dispose of existing bleachers and install a new Hussey Seating Maxim wall-attached telescopic bleacher system at Tinker AFB. The new system must be approximately 45 feet long, extend over 9 feet when deployed, and include ADA-compliant wheelchair seating, companion seating, and all necessary safety rails. The installation must be performed by a factory-certified installer and must be fully compatible with the existing gymnasium dimensions and structural requirements without needing major modifications. This is a Sources Sought notice under NAICS code 337120, intended for small businesses. Interested parties must submit a capabilities statement by August 18, 2026, detailing their past performance, technical skills, and ability to perform at least 50 percent of the work as a prime contractor. Submissions should be sent via email to the designated contracting officers and must include company profiles, CAGE codes, and information regarding any available government contract vehicles.

General Info

Small business sources sought for bleacher removal and Hussey Seating installation at Tinker AFB.

Agency

Department Of Defense → FA8136 Afsc PziobView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

0, OK, 73145, USA

Set-Aside

SBA

Documents

(1)

STATEMENT+OF+NEED+-+12+Aug+2026.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8136 Afsc Pziob
Contacts2 people available
OfficeTINKER AFB, OK, 73145-9125, USA
Organization / Agency
Department Of Defense → FA8136 Afsc Pziob
View Agency Profile
Office AddressTINKER AFB, OK, 73145-9125, USA

Full Description

Show more

The Government requires the purchase and installation of one Hussey Seating Maxim wall-attached
telescopic bleacher system, approximately 45 feet in installed length and extending approximately 9
feet 1 inch when fully deployed. The system shall include integrated ADA-compliant wheelchair seating
locations with companion seating, aisle handrails, end rails, all required safety features, delivery,
installation, testing, and manufacturer's warranty.
The replacement bleacher system must be fully compatible with the existing gymnasium dimensions,
wall-mounted configuration, structural loading requirements, operating clearances, and existing facility
layout without requiring major structural modifications


Demolition and removal of the existing bleachers (approximately 25 years old)
Proper disposal of removed materials, Installation of the new system by a factory-certified installer.



ELIGIBILITY


The applicable NAICS Code for this requirement is 337127, with a Small Business Size standard of 500 employees. The Product/Service Code (PSC) for this effort is 7195 as a Product/Commodity. This Sources Sought Synopsis is requesting responses to the following criteria ONLY from businesses that can provide the required services under the NAICS Code.


SUBMISSION DETAILS


Interested businesses are requested to submit a capabilities statement of no more than six (6) pages in length in Times New Roman font of not less than 12 pitch.


Interested businesses should submit a brief capabilities statement package that shall address, at a minimum, the following items:


  1. What type of work has your company performed in the past in support of the same or similar requirement? This should include the contract number, organization supported, indication of whether as a prime or subcontractor, contract value, Government point of contact, and a brief description of how the referenced contract relates to the products described.
  2. Can or has your company managed a task of this nature? If so, please provide details.
  3. What specific technical skills does your company possess which ensure capability to perform the tasks outlined in the description?
  4. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14, the small business prime must perform at least 50% of the work themselves in terms of the cost of performance. Provide an explanation of your company's ability to perform at least 50% of the tasking described.
  5. Provide a statement including current small status and company profile to include number of employees, annual revenue history, office locations, DUNS number, CAGE code, etc. Also indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service-Disabled Veteran-Owned Small Business Concern.
  6. Any Contract vehicles that would be available to the Government for the procurement of the product and service, to include GSA Federal Supply Schedules (FSS), or any other Government Agency contract vehicle. (This information is for market research only and does not preclude your company from responding to this notice.)

In order to make a determination for a small business set-aside, two or more qualified and capable small businesses must submit responses that demonstrate their qualifications and ability to perform in accordance with the Limitations on Subcontracting clause (FAR 52.219-14).



To assist the Government in making a determination regarding the level of participation by small business in any subsequent procurement that may result from this Sources Sought, you are also encouraged to provide information regarding your plans to use joint venturing (JV) or partnering to meet each of the requirements areas contained herein. This includes responses from qualified and capable Small Businesses, Small Disadvantaged Businesses, Service Disabled-Veteran Owned Small Businesses, Women-owned Small Businesses, HUBZone Small Businesses, and 8(a) companies. You should provide information on how you would envision your company's areas of expertise and those of any proposed JV/partner would be combined to meet the specific requirements contained in this announcement.



Your responses to this Sources Sought shall be electronically submitted to the Contracting Officer Kristoforus Wenas and Contracting Specialist Lauren Rodgers in Portable Document Format (PDF) via e-mail with the subject line Tinker AFB Bleachers Sources Sought to kristoforus.wenas.1@us.af.mil and lauren.rodgers.5@us.af.mil.


The deadline for response to this request is 18 August, 2026, 2 pm (1400) Central Time.


Proprietary information and trade secrets, if any, must be clearly marked on all materials. All information received that is marked Proprietary will be handled accordingly. Please be advised that all submissions become Government property and will not be returned.


No phone calls will be accepted.



Questions may be submitted via email to kristoforus.wenas.1@us.af.mil@us.af.mil or lauren.rodgers.5@us.af.mil@us.af.mil. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to these Sources Sought

Similar Contracts

Same NAICS industry code

NAICS: 337127
New
Federal
7195-- DOMICILLARY MENTAL HEALTH RESIDENT FURNITURE
Solicitation # 36C24726Q0746
This solicitation, issued as an RFQ under the Revolutionary FAR Overhaul, is a service-disabled veteran-owned small business (SDVOSB) set-aside for the procurement of behavioral health furniture and installation services for the Fort McPherson VA Clinic in Atlanta, Georgia. All offerors must be actively registered in SAM.gov and verified through the SBA’s VetCert program at the time of quote submission and award. The NAICS code is 337127 with a 500-employee small business size standard, and the procurement falls under FSC/PSC 7195. The requirement includes 59 single platform beds with open side storage, 59 matching behavioral health mattresses, two double XL platform beds and mattresses, 39 behavioral health desks, 34 dressers, 21 double wardrobes, and six single wardrobes—all in Warm Sand or Dolce Vita finishes—along with full delivery and installation services. All furniture must meet strict behavioral health safety standards, including anti-ligature design, tamper-resistant hardware, non-porous and bleach-compatible surfaces, structural durability equivalent to BIFMA standards, and the ability to be securely anchored. Substitutions require prior approval from the VA Interior Designer and must match or exceed all specified technical characteristics. The contract demands a comprehensive project management approach, requiring a dedicated Project Manager to oversee delivery, coordinate installation phasing across six residential wings in Buildings 130 and 131, and ensure all work occurs after regular business hours to avoid disrupting residents. Installation must be completed within 180 days of Notice to Proceed, with all products delivered no later than December 31, 2026. The contractor is responsible for protecting VA property, providing floor protection, removing all packaging and debris daily, and repairing or replacing any damaged or defective items within four weeks of installation. Proposal submissions must be in PDF or Excel format, sent via email to LaTerrica.Sewell@va.gov by August 10, 2026, and include complete technical documentation such as cut sheets, bill of materials tagged by CLIN, sustainability certifications, and a self-certifying statement of schedule compliance. Pricing must be submitted separately for labor and materials, with unit prices limited to two decimal places. Awards will be made based on best value, evaluating technical capability and price reasonableness under simplified acquisition procedures, with full compliance to FAR 52.212-1, -2,
247-NETWORK Contract Office 7 (36C247)

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 337127
New
International
49 Dorchester SYD Nova Scotia Modernization Project – Task and Meeting Chairs
Solicitation # CIC - 160388
Immigration, Refugees and Citizenship Canada is soliciting bids for the purchase, delivery, and installation of 235 ergonomic rotary chairs for the 49 Dorchester modernization project in Sydney, Nova Scotia. The requirement consists of 29 low back standard ergonomic rotary chairs and 206 standard ergonomic rotary chairs, with a final delivery and installation deadline of March 31, 2027. This opportunity is issued under PWGSC Supply Arrangement E60PQ-120001/H and is specifically solicited among pre-qualified PSIB Suppliers. Non-SA holders may bid but cannot be awarded a contract until they have been issued a supply arrangement by the SAA. Technical requirements mandate that all chairs meet BIFMA Level 3 sustainability standards and include specific ergonomic features such as adjustable lumbar support and dual cylinder seat height adjustment. A minimum 12-year parts warranty is required, with a 5-year warranty for user-adjustable components. All units must feature bilingual English and French labeling and instructions. Bidders must submit their proposals in three sections covering technical, financial, and certification requirements via email in PDF format, ensuring the total submission does not exceed 10MB. Evaluation is based on mandatory technical criteria, including compliance with product specifications and the submission of detailed data sheets. Delivery is governed by DDP Incoterms, meaning the supplier is responsible for all costs and risks until the goods reach the destination.
Department of Citizenship & Immigration

POSTED

2 days ago

DEADLINE

in 4 days
View Details