Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

tools

Active

W911S226U3817Federal

Response Deadline08/18/2026, 04:55:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled "tools" under solicitation number W911S226U3817 is a combined solicitation issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and the NAICS code 333517 indicates it relates to the manufacturing of hand and edge tools. The opportunity was posted on August 10, 2026, with a response deadline of August 18, 2026, at 4:55 a.m. Eastern Time. The place of performance is listed with a zip code of 22211, suggesting delivery or fulfillment will occur in the Arlington, Virginia area. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476. Full details regarding the specific tools required are outlined in the attached solicitation document, and interested parties can access the official listing through the provided SAM.gov link.

General Info

Small business set aside for hand and edge tool manufacturing, due August 18, 2026, Fort Drum, Virginia performance.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

1 Memorial Dr Arlington VA Arlington National Cemetery, NY, 22211

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 10

Combined Synopsis

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 04:55:00 AM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Anthony Zyla

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Milwaukee tools see attached solicitation for full listing of items

Similar Contracts

Same NAICS industry code

ROLL SET, ROLLER TUB

Solicitation # SPE8E5-26-T-3954

The contract is for the procurement of one unit of a ROLL SET, ROLLER TUB identified by NSN 3456-00-640-3671 and purchase request 7017219214 under solicitation SPE8E5-26-T-3954, with a required delivery within 20 days of award. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must fully comply with MIL-STD-2073-1E and Appendix D for kits, requiring all components to be placed in a single secure box with adequate cushioning to prevent damage; if multiple boxes are necessary, each must be labeled with its kit portion (e.g., 1 of 2). Marking must follow MIL-STD-129 with no special codes applied. Preservation and packaging methods adhere to specified codes and standards including preservative methods, wrap, and cushioning materials, and palletization must meet DLA packaging requirements. The item is to be shipped via the fastest traceable means directly to USS KEARSARGE LHD 3 at FPO AE 09534, and parcel post is prohibited. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date. The delivery is tied to a specific project code and the contract includes provisions for covered defense information and government-only administrative data, with primary point of contact being Brandon Wicker of the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

MILL/TURN TOOLING

Solicitation # RFP491200

Oak Ridge National Laboratory is seeking quotations for Mill/Turn Tooling and associated accessories, with a preference for domestically sourced alternatives, as detailed in the Bill of Materials provided in Attachment D. The solicitation, identified as RFP491200, was posted on August 10, 2026, and requires responses by August 14, 2026, at 9:00 PM Eastern Time. This is a combined solicitation under NAICS code 333517, managed by Oak Ridge National Laboratory through its contractor UT-Battelle LLC for the U.S. Department of Energy. The contract is to be performed at the laboratory’s facility in Oak Ridge, Tennessee, with a postal code of 37830. Morgan Hale of ORNL serves as the primary point of contact, reachable via phone at 615-519-9527 or email at halemt@ornl.gov. All proposals must be submitted through the SAM.gov portal linked in the solicitation.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 9 hours ago

DEADLINE

3AXIS MILL TOOLING

Solicitation # RFP491285

Oak Ridge National Laboratory is seeking a vendor to supply 3AXIS Mill Tooling and associated accessories, with a preference for domestic alternatives, as detailed in the Bill of Materials listed in Attachment D. The solicitation, identified as RFP491285, was posted on August 10, 2026, and responses are due by August 14, 2026, at 9:00 PM Eastern Time. This is a combined solicitation under NAICS code 333517, targeting industrial machinery manufacturing, and is not set aside for any specific small business category. The contract is managed by UT-Battelle LLC, the Department of Energy’s contractor at Oak Ridge, with performance taking place in Oak Ridge, Tennessee. All correspondence and submissions should be directed to Morgan Hale at halemt@ornl.gov or by phone at 615-519-9527. The office address and place of performance are both located in Oak Ridge, TN, with a ZIP code of 37831 and 37830 respectively, and the full solicitation details can be accessed via the provided SAM.gov link.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 9 hours ago

DEADLINE

W0113-27CS22 - CNC Capable Vertical Milling Machine

Solicitation # WS5801048823

The Government of Canada, through the Department of Public Works and Government Services, is soliciting bids for a CNC capable vertical milling machine under solicitation number WS5801048823, posted on August 10, 2026, with a response deadline of August 20, 2026. The procurement falls under NAICS code 333517, specifying machinery for metal processing, and is open to federal suppliers without set-aside restrictions. The equipment is intended for performance within Ontario, excluding the National Capital Region, and must meet technical specifications for computer numerical control operation, precision milling, and industrial durability suitable for government use. Victoria Kotsopoulos2 of SPAC/PSPC serves as the primary point of contact for all inquiries, reachable via the official government email provided. Interested parties must submit proposals through the Canada Buys portal prior to the deadline to be considered for award.

Department of Public Works and Government Services

POSTED

about 16 hours ago

DEADLINE

ROLL SET, ROLLER TUB

Solicitation # SPE8E5-26-T-3946

The contract pertains to the procurement of a ROLL SET, ROLLER TUB identified by NSN 3456-00-640-3671 with a quantity of four standard units, issued under solicitation SPE8E5-26-T-3946. The item must be delivered FOB origin within 136 days of contract award, with no tolerance for quantity variance, and delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including preservation methods as specified, with components packaged as a kit in a single box or multiple boxes clearly labeled as part of a set. Each box must contain an internal inventory list and adequate cushioning to prevent damage during transit. Marking, palletization, and preservation follow DLA’s detailed packaging requirements, incorporating technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition size. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the contract mandates inspection and acceptance at the destination point. The item is subject to Covered Defense Information provisions and must be handled in accordance with federal procurement protocols for defense supply chain requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Mill Turning Center Machine SupplyThe contract seeks the supply of a new or certified refurbished Mill Turning Center Machine designed to meet detailed government technical specifications for procurement by DEVCOM ARL under the Department of Defense. The machine must comply with all performance, durability, and operational requirements established for military-grade manufacturing and precision engineering applications. The procurement is classified as a subcontract under NAICS code 333517, indicating it falls within the category of metalworking machine tool manufacturing, and the place of performance is clearly designated as Aberdeen Proving Ground with a zip code of 21005, ensuring delivery and integration occur at this critical defense facility. The solicitation was posted on August 7, 2026, with a strict response deadline of August 12, 2026, at 3:00 PM, leaving a narrow window for interested parties to submit proposals. No set-aside designation is specified, meaning the opportunity is open to all qualified contractors without preference for small businesses or other categories. The contract is managed by the W6QK Acc-Apg Adelphi office, and while no point of contact is listed, the official SAM.gov link provides access to full documentation. Bidders must ensure their equipment meets exacting standards for integration into current DoD infrastructure and that certification, if using refurbished units, is verifiable and compliant with applicable federal acquisition regulations and military quality assurance protocols.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

Supply of Horizontal Spindle Engine LathesThe contract calls for the procurement and delivery of three horizontal spindle engine lathes specifically designed to meet established technical standards for use in Air Force Aircraft Metals Technology Shops. These machines are essential for precision metalworking tasks and must be fully compliant with required specifications to ensure compatibility and operational reliability within military maintenance environments. The solicitation is structured as a subcontract under a Small Business Set Aside classification, meaning only qualified small businesses are eligible to bid, promoting participation from smaller enterprise partners within the defense supply chain. The procurement is managed by the Office of Centralized Acquisition Services under the General Services Administration and is classified under NAICS code 333517, which covers machine shop, turned product, and screw, nut, and bolt manufacturing. Interested parties must submit responses by the deadline of August 24, 2026, with the opportunity posted on August 7, 2026. While specific delivery locations and point of contact details are not provided, the place of performance is intended for Air Force Aircraft Metals Technology Shops, indicating the equipment must be capable of supporting critical aerospace component repair and fabrication. The contract emphasizes technical accuracy, small business participation, and timely delivery to sustain essential defense manufacturing capabilities.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

Solicitation # 47QACA26Q0392

The United States Air Force Life Cycle Material Command is seeking engine lathes through a firm-fixed price supply contract issued under simplified acquisition procedures for commercial products, with the requirement fully set aside for small businesses. The lathes must meet specific salient characteristics outlined in Attachment 1 of the RFQ and are intended to enable precise shaping, cutting, and finishing of metal and other rigid materials to support critical maintenance and production missions. The solicitation, identified by number 47QACA26Q0392, was posted on August 7, 2026, with responses due by August 24, 2026, and is managed by the Office of Centralized Acquisition Services under the General Services Administration. The NAICS code for this procurement is 333517, indicating the focus on industrial machinery manufacturing. All submissions must consist exclusively of engine lathes, and vendors must be certified small businesses to qualify. The point of contact for inquiries is Melissa Martel, reachable via email or phone, with the office located in Washington, D.C. The place of performance has not been specified, and all award decisions will be made based on technical compliance and firm-fixed pricing.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

Sources Sought for Mill Turning Center Machine

Solicitation # W911QX26QA175

The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking information from potential suppliers regarding the procurement of a Mill Turning Center Machine under solicitation number W911QX26QA175. This sources sought notice was posted on August 7, 2026, with responses due by August 12, 2026, at 3:00 PM Eastern Time. The effort falls under NAICS code 333517, which pertains to Metalworking Machinery Manufacturing, and no set-aside provisions are currently planned, meaning the opportunity is open to all eligible businesses regardless of size or status. The machine is intended for use at Aberdeen Proving Ground in Maryland, with performance located at the specific site in the 21005 zip code. Primary point of contact for inquiries is Deneise Jackson, reachable via email at deneise.c.jackson.civ@army.mil or by phone at 5206729583. All interested parties should submit responses through the SAM.gov platform using the provided UI link to ensure inclusion in the government’s evaluation process.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

LASER CUTTER AND ENGRAVER

Solicitation # N00174-26-SIMACQ-W12-0004

The U.S. Navy’s Naval Surface Warfare Center, Indian Head Division, is seeking to procure a laser engraver and laser cutter under a total small business set-aside solicitation numbered N00174-26-SIMACQ-W12-0004, with responses due by August 17, 2026. This requirement is strictly for brand-specific equipment—specifically the Boss FM D Desktop fiber laser engraver with a 50W Universal Fiber Source and associated components—as defined in the statement of work to support the NISE FY26 CBRD lab revitalization initiative. The procurement will be evaluated using the Lowest Price Technically Acceptable (LPTA) methodology, with all quotes required to be all-inclusive and valid for 30 days, including full shipping costs directly to the delivery location at Indian Head, Maryland under FOB Destination terms. Vendors must provide their CAGE code, point of contact, phone number, and confirm compliance with mandatory federal systems: they must be registered in the System for Award Management (SAM), use Wide Area WorkFlow (WAWF) for invoicing and payment, and comply with all representation and certification requirements including small business size status and the prohibition on using PCARD as a payment method. All delivered equipment must comply with stringent military standards for identification and marking, specifically MIL-STD-130 for unique item identification using a two-dimensional Data Matrix barcode encoded with Format Indicators 05, 06, or 12, and MIL-STD-129 for shipment and storage labeling. The equipment must be delivered within 60 days of contract award, no later than September 30, 2026, and include a two-year warranty. The government will inspect and accept the items at the delivery site, verifying proper marking and documentation in accordance with DFARS Appendix F. Contractors must also comply with cybersecurity requirements under DFARS 252.204-7025, aligning with the Cybersecurity Maturity Model Certification (CMMC) Level 1 or higher, and maintain compliance with a range of FAR and DFARS clauses covering labor standards, equal opportunity, trafficking in persons, and security prohibitions. The contract is a firm-fixed-price agreement, and award will be made to the lowest-priced technically acceptable offer that meets all mandatory specifications, with payment administered exclusively through WAWF and coordinated with the designated Contracting Officer and Contracting Officer’s Representative.

Nswc Indian Head Division

POSTED

DEADLINE

Precision Tubing Bender Machine Supply

FA4690 28 Cons Pkc

POSTED

DEADLINE

UV Laser Engraver

Solicitation # W911S226U3833

The contract titled UV Laser Engraver is a combined solicitation issued under solicitation number W911S226U3833 by the Department of Defense, specifically through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under the NAICS code 333517, which pertains to laser equipment manufacturing. The response deadline was extended from August 6, 2026, to August 14, 2026, at 6:20 p.m., providing vendors additional time to submit proposals. The place of performance is listed with a zip code of 31905, likely corresponding to a military or government facility in that region. Primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or phone at 5206936006. The solicitation is accessible through the SAM.gov portal for further details and submission.

W6QM Micc-Ft Drum

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Solicitation # W911S226U3898

The contract solicitation titled STEEL BAR under solicitation number W911S226U3898 is a combined action issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under NAICS code 331110 which corresponds to Steel Mill and Steel Product Manufacturing. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026, at 9:00 PM Eastern Time. The primary point of contact for inquiries is Cindy Jepsen, reachable via email at cindy.k.jepsen.civ@army.mil or phone at 309-782-8389. The place of performance is listed with a zip code of 61299, though specific city and state details are not provided. This solicitation specifically updates the length of the steel bar and the quantity requested, indicating prior requirements have been modified to reflect current procurement needs.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3980

The contract specifies the procurement of a Bobcat Toolcat UW56 or an equal model featuring a 61-horsepower turbo diesel engine and an operating weight between 5,800 and 6,000 pounds. It requires a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive with limited slip differentials, and an all-wheel steer system. The machine must include a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction features, front windshield wipers, an AM/FM radio with weather band, a backup camera, horn, exterior side mirrors, and a keyless start system. Operational and safety requirements include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, warning beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel capacity. The hydraulic system must deliver auxiliary hydraulics at 18 gallons per minute and high-flow hydraulics at 27 gallons per minute, with pressure-relieved remotes and a 7-pin electric attachment kit. Joystick controls, a skid steer-style coupler, and a hydraulic quick-change system are mandatory. Equipment must include a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower compatible with high-flow hydraulics, a hydraulic dump box rated for a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The delivery must include all operational and service manuals, a scannable unique identification label, on-site operator training, and delivery to Fort Drum, New York. This is a Small Business Set Aside solicitation under NAICS code 339999, issued by the Department of Defense, with bids due by August 14, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3990

The U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum, is seeking qualified small businesses to supply an Oil Filter Crusher under a combined solicitation with the number W911S226U3990. This opportunity is exclusively reserved for small businesses under the SBA Small Business Set Aside - Total category, with the NAICS code 333618 indicating the contract falls under Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 76544, though no specific city or state is provided. The primary point of contact for inquiries is Rachel Rosenbaum, reachable by phone at 254-287-0304 or email at rachel.r.rosenbaum.civ@army.mil. The contract’s official details and submission portal can be accessed via the SAM.gov link associated with the opportunity.

Other Engine Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3965

The contract involves the procurement of GEM electric passenger vehicles with a seating capacity of six, specifically amended to update the NAICS code to 336999, which classifies it under other transportation equipment manufacturing. The solicitation number is W911S226U3965, posted on August 10, 2026, with a response deadline of August 14, 2026, at 10:00 PM Eastern Time. This is a combined solicitation under a Small Business Set Aside, fully reserved for small businesses, as administered by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. The place of performance is indicated with a zip code of 10996, though the specific city and state are not provided. The primary point of contact is Paul Maxwell, reachable via email at paul.maxwell@westpoint.edu or by phone at 845-938-2845, and the full details can be accessed through the SAM.gov workspace link provided.

All Other Transportation Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3991

The contract, titled sound system, is issued under solicitation number W911S226U3991 by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a Small Business Set Aside with a total set-aside designation, reserved exclusively for small businesses as defined by the SBA, and is classified under NAICS code 339992 for other miscellaneous manufacturing. The requirement involves providing a sound system for a DIV Level ceremony, and the solicitation has been amended specifically to update the PSC Code. All responses must be submitted by August 14, 2026, at 6:00 PM Eastern Time, with the solicitation posted on August 10, 2026. The point of contact for inquiries is Steven Bekiesz, reachable at 315-772-6155 or steven.j.bekiesz.mil@army.mil. Performance will occur at Fort Drum, NY, with a zip code of 13602, and the full solicitation details can be accessed through the SAM.gov portal.

Musical Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

Pre-fabricated Office for Building 613

Solicitation # W911S226U3998

The contract requires the design, manufacture, delivery, and installation of a single prefabricated modular in-plant office measuring 60 feet by 12 feet with a 10-foot interior wall height for Building 613 at Fort Drum, New York. The office must be fully self-contained and capable of accommodating an eight-station layout with projecting privacy panels, requiring the contractor to supply all labor, materials, equipment, and transportation necessary for complete execution. The structure must be engineered for seamless on-site assembly and integration into the existing facility environment, ensuring compliance with functional and spatial requirements without on-site construction. This solicitation, identified as W911S226U3998, was posted on August 10, 2026, with a response deadline of August 13, 2026, and falls under NAICS Code 321992 for other wood product manufacturing. The contracting activity is managed by the Department of Defense through the W6QM Micc-Ft Drum office, with primary point of contact Ricardo Lopez-Hernandez reachable via email and phone. The place of performance is located at Fort Drum with a ZIP code of 00954, and all deliverables must be completed at this location. The contract type is combined, indicating it may include both service and supply elements, and no set-aside classification is specified.

Prefabricated Wood Building Manufacturing

POSTED

about 9 hours ago

DEADLINE

Cardio Equipment

Solicitation # W911S226U3969

The contract titled Cardio Equipment, identified by solicitation number W911S226U3969, is a combined opportunity issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is designated as a Small Business Set Aside under the SBA program with no further restriction on the total amount, meaning only small businesses are eligible to compete. The NAICS code has been amended to 339920, which corresponds to the manufacturing of other miscellaneous fabricated metal products, reflecting a shift in classification for the procurement. The opportunity seeks updates on the specifications of non-motorized treadmills, indicating a focus on fitness equipment used for physical training, possibly for military personnel. The posting date is August 10, 2026, with a mandatory response deadline of August 13, 2026, at 5:00 PM Eastern Time. The place of performance is linked to the ZIP code 13602, aligning with Fort Drum, NY. Primary point of contact for inquiries is Patrick Sandora, reachable via email at patrick.a.sandora.civ@army.mil or by phone at 315-774-0977. Further details and documentation can be accessed through the official SAM.gov link provided.

Sporting and Athletic Goods Manufacturing

POSTED

about 9 hours ago

DEADLINE

Commercial Ice Machine

Solicitation # W911S226U3996

The U.S. Department of Defense through the W6QM Micc-Ft Drum office is soliciting commercial block and cube ice machines under contract number W911S226U3996, with a solicitation posted on August 10, 2026, and responses due by August 17, 2026, at 2:00 PM Eastern Time. This is a combined solicitation and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 333415 categorizing the procurement as ice machine manufacturing. The contract will be performed at a location with a zip code of 65473, though the specific city and state are not listed, and the award will be managed by the Fort Drum, New York office with a mailing address in 13602-5220. Direct inquiries and communications should be directed to Leon Funches, the primary point of contact, who can be reached via email at leon.p.funches.civ@army.mil or by phone at 573-563-5113. Interested vendors must submit proposals through the SAM.gov portal linked in the announcement.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Camera Equipment

Solicitation # W911S226U3988

The contract titled Camera Equipment, identified by solicitation number W911S226U3988, is a combined solicitation set aside exclusively for small businesses under the SBA Small Business Set Aside - Total designation. It was posted on August 10, 2026, with a response deadline of August 14, 2026, at 1:00 PM Eastern Time. The North American Industry Classification System code has been amended to 334310, which corresponds to camera and photographic equipment manufacturing, reflecting the nature of the goods being procured. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located at Fort Drum, New York, with a zip code of 13602-5220, while the place of performance is indicated as 22211, though the city and state are unspecified. Primary point of contact for inquiries is Anne Friend, reachable via email at anne.p.friend.mil@army.mil or by phone at 571-268-3768. Further details and the solicitation can be accessed through the SAM.gov portal using the provided UI link.

Audio and Video Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3972

The contract is for the procurement of one DV60 Cabin dumper equipped with turf tires sized 41x18LL-22.5, designed for turf-specific operations with a 6-ton capacity and a 180-degree swing capability. The unit includes a ROPS/FOPS Level II certified cab, air conditioning, and full work lighting to ensure operator safety and functionality in varied conditions. This is a combined solicitation under the Small Business Set Aside program, exclusively open to small businesses as defined by the SBA, and falls under the NAICS code 333120 for construction machinery manufacturing. The solicitation number is W911S226U3972, posted on August 10, 2026, with a response deadline of August 18, 2026, at 4:55 AM Eastern Time. The purchasing agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, and the item is to be delivered to a performance location with the zip code 22211. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476.

Construction Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # W911S226U3984

The U.S. Department of Defense, through the W6QM Micc-Ft Drum office located in Fort Drum, New York, has issued a combined solicitation for refrigerators under the Small Business Set Aside - Total program, specifically targeting small businesses as defined by the SBA. The procurement is classified under NAICS code 335220, which pertains to household appliance manufacturing, and the contract opportunity was posted on August 7, 2026, with a response deadline of August 13, 2026, at 12:10 PM Eastern Time. While the primary office is in Fort Drum, the place of performance is designated with a ZIP code of 31314, indicating the goods may be delivered to a location in Georgia. Charlie Hughes serves as the primary point of contact, reachable via email at charlie.d.hughes.civ@army.mil or by phone at 571-801-2263 for inquiries related to the solicitation. The opportunity is accessible online through the SAM.gov portal for authorized vendors seeking to submit proposals.

Major Household Appliance Manufacturing

POSTED

DEADLINE

Draper Inc. Backstop Repair on Fort Drum, NY

Solicitation # W911S226QA088

The solicitation W911S226QA088 seeks qualified vendors to perform repair services on basketball backstops located at Fort Drum, NY, specifically requiring proof of being an approved sales and service vendor for Draper Inc. Proposals must be submitted electronically through the PIEE Solicitation Module, with a designated Proposal Manager responsible for posting the quote and managing communications. Interested parties must verify their vendor status with Draper Inc. as a prerequisite to submission. All questions regarding the solicitation must be submitted by Friday, August 14, 2026, at 11:00 AM Eastern Time, and responses are due by August 21, 2026, at 3:00 PM Eastern Time. This is a Small Business Set Aside, total, under NAICS code 811490, and is managed by the Department of Defense through the W6QM Micc-Ft Drum office. The primary point of contact for inquiries is Mary Summerlin, reachable at mary.e.summerlin3.civ@army.mil. Training and guidance on using the PIEE system, including role setup and submission procedures, are available through the designated web-based training portal.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE