Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TOW COLLAR, LANDING GEA

Active
SPE4A7-26-T-600PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.

General Info

Procurement of two TOW COLLAR landing gear units under DLA solicitation, small business set-aside, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Mahlon Marcus
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TOW COLLAR,LANDING GEAR
TOW COLLAR, LANDING GEAR
RT001: MEASURING AND TEST EQUIPMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1620-01-073-1108 Quantity: 2 EA Purchase Request: 7017572611QTY: 2 Delivery: 163 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A7-26-T-600A
The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUCT, AIR CONDITIONING
Solicitation # SPE4A7-26-Q-0882
The contract is for the procurement of two duct air conditioning units under NSN 1560-00-878-4950, with a delivery requirement of 282 days after award. It is issued under solicitation SPE4A7-26-Q-0882, with a response deadline of August 10, 2026, and is classified under NAICS code 336413 for aircraft and parts manufacturing. The contract incorporates a comprehensive set of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection at origin, measurement and test equipment compliance, and configuration change management. Export control is strictly enforced under ITAR or EAR regulations, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and applies to all contractors and their subsidiaries. Access to this data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Additionally, government identification must be removed from non-accepted supplies, and all work must comply with tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email and phone provided in the contract data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
KIT, SPLICE BAR
Solicitation # SPE8E6-26-T-3921
The contract is for the procurement of fifteen KIT, SPLICE BAR units with part number 9365604 and NSN 6920-01-194-7668, issued under solicitation SPE8E6-26-T-3921 by the Defense Logistics Agency. The requirement is classified under NAICS code 336413 and is slated for delivery within ten days of award. Acceptable sourcing is restricted to INSUL-8-CORP OMAHA, NE operating as CONDUCTIX INC with CAGE code 00503, reflecting limited competition due to proprietary or insufficient data for broader bidding. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date unless modified by an amendment. Packaging must adhere to DLA packaging requirements, and all supplies must comply with the directive to remove government identification from non-accepted items. The point of contact for inquiries is Sophia Lim, reachable via email and phone provided, and responses are due by August 10, 2026.
Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-Q-0888
The contract pertains to the procurement of four aircraft stiffeners identified by NSN 1560-01-467-5640, with a delivery requirement of 221 days after award. Technical and quality specifications are governed by referenced requirements from the DLA Master List, including packaging standards, tailored quality controls, inspection protocols at the manufacturer’s facility, and procedures for removing government identification from non-accepted items. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire approvals. The solicitation, issued under number SPE4A7-26-Q-0888, was posted on July 29, 2026, with responses due by August 8, 2026. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-313B
The contract specifies the procurement of a structural plate identified by NSN 1560016936152 and part number 356T0102-1, supplied in a quantity of one unit under solicitation SPE4A5-26-T-313B. The item is classified as a critical application component for Boeing and is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which incorporate R and I numbers as governing specifications. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03. The plate must meet FAA bare item marking requirements and airworthiness approval standards, with verification procedures aligned to MIL-STD-1916 or ASQ H1331, including zero non-conformances in sampling unless otherwise stated. Packaging and marking adherence to MIL-STD-2073-1E and MIL-STD-129 is mandatory, with palletization following DLA Packaging Requirements, and parcel post shipping is explicitly prohibited. Delivery is FOB origin with a strict 20-day timeline, inspection and acceptance occurring at destination, and both units carry identical packaging and delivery conditions. The contract also defines specific freight and receiving addresses at Joint Base MDL, New Jersey, and requires shipment by the fastest traceable means with unique tracking identifiers. Unit price is set at $1.00, total price reflects nominal value, and no quantity variance is permitted. The item does not require Unique Identification per customer request, and all documentation and compliance obligations are tied to active DLA and DoD directives as of the solicitation and award dates.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SPIDER, LOWER, MAIN
Solicitation # SPE4AC-26-T-0073
Offerors must not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry Amendment threshold lowered to $150,000. Non-domestic materials require full disclosure to the point of contact. Small business joint ventures must submit all applicable representations under FAR provisions 52.212-3 and 52.219-1. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand on open purchase requests, as this allows buyers to consolidate or adjust quantities without resolicitation. Fast Pay is not applicable. All offerors must register through DLA’s Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module; those using VSM WebServices must update their internal schema by the April 23, 2025 deadline to maintain shipping capability. Offers containing items produced via additive manufacturing are ineligible for award unless prior written approval is obtained. Offerors must submit a “No Bid” quote on DIBBS if unable to respond by the closing date to avoid assumptions of non-responsiveness. The solicitation is for 15 Spider, Lower, Main units with NSN 1615-01-472-3630, delivery required within five days of order, and responses are due by August 6, 2026. Technical assistance is available at no cost through APEX Accelerators for businesses seeking to navigate government contracting.
CCAD DETACHMENT

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-Q-0924
The contract is for four aircraft stiffeners identified by NSN 1560-01-467-5640 under solicitation SPE4A7-26-Q-0924, with a delivery requirement of 221 days after order. The technical and quality requirements for this item are governed by specific DLA master list codes including RP001 for packaging, RQ001 for tailored quality standards for manufacturers and non-manufacturers, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ032 for export control of technical data. The technical data associated with this item is subject to export regulations under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to contractors who hold a valid U.S./Canada Joint Certification Program certification, have completed mandatory DOD export-controlled data training and the DLA questionnaire, and have received formal approval from the DLA authority. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contracting office is the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with April Reed designated as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A6-26-T-10GZ
The contract specifies the procurement of five wire rope assemblies with the NSN 4010-00-868-0850, under solicitation SPE4A6-26-T-10GZ, with a delivery deadline of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions based on solicitation or award date depending on acquisition size. Packaging, identification, and marking must comply with DLA standards including RP001, RQ011, and RQ017, and critical characteristics must be verified using specified sampling plans under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. All junctions between swaged fittings and wire must be painted red prior to pull testing, and adherence to the referenced drawing is mandatory. Documentation for source approval, configuration changes, and inspection at origin are required under RC001, RQ002, and RQ009 respectively. Cybersecurity compliance mandates CMMC Level 2 certification, and export-controlled technical data is subject to ITAR or EAR regulations, restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and covered defense information is subject to DFARS 252.225-7048. The contract is managed by the Defense Logistics Agency’s ASC Commodities Division with primary point of contact Jessica Robinson.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
Federal
Rapid UAS Assembly & Field IntegrationThe contract seeks the development of modular, rapidly assembly processes for unmanned aerial system components such as avionics, propulsion systems, and flight testing equipment, specifically designed for deployment in remote operational environments. The focus is on creating standardized, transportable systems that minimize setup time and logistical complexity while maintaining performance and reliability under field conditions. This effort is intended to enhance operational agility by enabling quick integration and deployment of UAS platforms in austere locations without reliance on extensive infrastructure. The work is being pursued under a subcontract arrangement with the Department of Defense through the FA8684 Aflcmc Rodk office, with performance expected to center in Edwards. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026. The NAICS code 336413 indicates alignment with aerospace product and parts manufacturing, underscoring the technical and industrial nature of the required capabilities. While no set-aside designation is specified, the contract targets firms with expertise in rapid manufacturing, system integration, and field-deployable aerospace technologies capable of meeting the demanding requirements of military UAS operations.
FA8684 Aflcmc Rodk

POSTED

about 16 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
58--RMM,AIRCRAFT,MATERI, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QHA62
The contract pertains to NSN 7R-5836-015830123-QF, a flight-critical aircraft component requiring repair or modification, with a quantity of 32 units to be delivered FOB origin. Sole-source acquisition is authorized under FAR 6.302-1 due to the necessity of maintaining part quality through exclusive technical data, engineering expertise, and manufacturing knowledge held only by previously approved sources. The Government has determined that alternative sources cannot be qualified in time to meet operational requirements without jeopardizing fleet readiness, and only previously approved sources have been solicited. Any new source seeking to respond must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering production experience for identical or similar items; failure to provide complete data will result in disqualification. The Government retains discretion to proceed with award based on Fleet support needs if source approval cannot be completed in time. All interested parties may submit proposals or capability statements within 45 days from the notice date, or 30 days if under an existing Basic Ordering Agreement, but this is not a competitive solicitation. Commercial item submissions are accepted within 15 days, though the acquisition is not conducted under FAR Part 12 policies. Technical documents such as drawings, specifications, and Qualified Product Lists are not stocked at DODSSP but are accessible via ASSIST-Online, with downloadable PDFs available through the Quicksearch portal or orderable via the DODSSP Shopping Wizard after account registration. Requests may also be submitted by phone or mail if internet access is unavailable. The contracting office is NAVSUP Weapon Systems Support in Philadelphia, with primary point of contact Alexis T. Hoepfl, and the response deadline is August 18, 2026. The item’s procurement is conditioned on Government source approval, and no award will be made without adherence to established approval protocols.
Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336413
New
Federal
15--PARTS KIT,FASTENER
Solicitation # SPE4A726Q0923
The contract solicitation seeks proposals for a Parts Kit, Fastener with NSN 1560016993342, requiring a quantity of 20 units delivered to the DLA Distribution Depot in Oklahoma within 250 days after award. This is a Small Business Set Aside under NAICS code 336413, exclusively open to qualified small businesses, with all responsible sources invited to submit electronic quotes. The solicitation, identified by number SPE4A726Q0923, is available exclusively online through the SAM.gov platform, with no hard copies provided; digital drawings, military specifications, and standards can be accessed or ordered electronically. Responses must be submitted by the deadline of August 11, 2026, and inquiries should be directed via email to the designated buyer contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS portal. The issuing office is DLA Aviation under the Department of Defense, located in Richmond, Virginia.
DLA Aviation

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
Federal
Adding FMS Radome NIIN 013485145 to Boeing BOA
Solicitation # 013485145
NAVSUP WSS is seeking to add a Foreign Military Sales NIIN, 013485145, to Boeing’s Basic Ordering Agreement for the repair of radome components used in flight-critical systems. The Boeing Company is the sole approved Original Equipment Manufacturer with the exclusive capability to perform these repairs, as the government does not hold complete technical data or rights to the design, preventing full and open competition. Any offeror must be a previously government-approved repair source, and all proposals must include documentation proving source approval in accordance with the NAVSUP WSS Source Approval Brochure, which outlines the technical data requirements based on prior repair experience with similar items. Proposals lacking this required documentation or without evidence of an actively pending source approval request will be disqualified. The timeline for new source approvals is typically too lengthy to delay contract award, so if approval cannot be completed in time, the requirement may still be awarded based on urgent Fleet support needs. The solicitation closes on August 3, 2026, with performance expected in Hazelwood, Missouri, and inquiries should be directed to Tia Johnson at the provided Navy email.
Navsup Wss Philadelphia

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332312
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A7-26-Q-0920
The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.
Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
ARM, ACTUATING VANE
Solicitation # SPE4A7-26-T-599K
The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332322
New
DIBBS
DUCT ASSEMBLY, AIR COND
Solicitation # SPE4A7-26-Q-0921
The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.
Sheet Metal Work Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A7-26-Q-0922
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 11 hours ago

DEADLINE

in 9 days
View Details
NAICS: 315990
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-600B
This contract is for the procurement of 1,087 units of a spacer sleeve identified by NSN 5365-01-285-9796 and part number NAS42DD6-48N, classified as a commercial item under the DLA acquisition system. The item must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for inspection at origin, government identification removal, physical marking, and test equipment calibration. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging standards, and all labeling must reflect the specified unit of issue and quantity per unit pack. The item is designated as a critical application component and must meet the technical specifications of NAS42 Revision 11 dated 10/31/2012. Delivery is required FOB origin within 86 days, with strict zero tolerance for quantity variance and acceptance also taking place at origin. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute classification. The contract specifies a unit price and total value but does not include a shelf life requirement. All shipments must be directed to the DLA Distribution Depot at Hill AFB, Utah, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 16, 2027, with an initial ship date of November 1, 2026, under solicitation SPE4A7-26-T-600B, issued by the Department of Defense’s ASC Supplier Operations division.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-599M
This contract pertains to the procurement of 445 blind rivets identified by NSN 5320-01-192-1492 and part number NAS9308M-4-04, manufactured in accordance with Technical Data Package Revision B General 2, compliant with NAS9308 Revision 5 and reference drawing 13873 011921492-19241. The items must meet all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at origin, following zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must be physically marked and labeled as required, with government identification removed from non-accepted supplies. Packaging shall be palletized per RP001, and the unit of issue is each, with no variance permitted in quantity. The delivery schedule requires fulfillment within 84 days of award, with delivery scheduled for October 30, 2026, and an original required delivery date of January 1, 2027. The destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-599M with a total price of $445.00 per unit for the full quantity, and the point of contact is Brad Ingram of the Department of Defense.
Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNITI
Solicitation # SPE4A7-26-T-600N
The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-Q-0886
The contract specifies the procurement of 45 units of BRUSH SEAL, COVER, with each unit measured as 1PG equaling 2EA, resulting in a total of 90 individual items. The item is identified by NSN/Part Number 1680-01-062-1740 and is tied to Purchase Request 7016849191. Delivery is required within 106 days after delivery order. The solicitation number is SPE4A7-26-Q-0886, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 8, 2026, and a posted date of July 29, 2026. Primary point of contact is April Reed, reachable via email and phone provided. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and approval from the DLA controlling authority are permitted to access this data. Additional requirements include certification as a CMMC Level 2 C3PAO and compliance with physical identification and bare item marking standards. All distribution and handling must strictly conform to DLA’s export control protocols.

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
FITTING, STRUCTURAL
Solicitation # SPE4A7-26-Q-0928
The contract specifies the procurement of 15 structural fittings with NSN 1560-01-649-2616 under solicitation SPE4A7-26-Q-0928, with a delivery requirement of 250 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, inspection and acceptance at origin, and strict retention of supply chain traceability documentation as defined in DLA Procurement Note C03 from August 2016. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Export control of technical data is strictly enforced under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization, and requires contractors to hold valid US/Canada Joint Certification Program certification, complete mandatory training and DLA questionnaires, and obtain formal approval from DLA to access controlled data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with point of contact Rekisha Burton, and the solicitation response deadline is August 11, 2026.
Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-600H
The contract pertains to the procurement of 30 units of a grooved coupling and clamp identified by NSN 5342-01-254-4624, with a required delivery within 20 days of award. This item is classified as a commercial item and is source-controlled, meaning it must be manufactured and tested using limited rights data associated with Honeywell International Inc. drawing 195792, revision P/N 195792-1, and only vendors with verified access to this data or traceability to approved sources—Eaton Aeroquip Inc and V.I.J. Corporation—are eligible to quote. The procurement is governed by technical and quality requirements referenced in the DLA Master List, with sampling to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances are required unless otherwise stated. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, requiring compliance with DFARS 252.225-7048 and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Documentation for source approval requests must meet RC001 requirements, and packaging must comply with DLA standards. Item Unique Identification is not required per customer request, and the acquisition falls under NAICS code 332510 with a response deadline of August 6, 2026.
Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details